New screen

hi,
i have created a new screen and added a block in the buttom of the screen. i want to output a text from an internal table at that block..how can i do that?
Does anybody knows?
please help....
thank you..
regards,
mae

Hi
Mae
just wht u need to do is u will have some name for tht displaying block naa
so in the PBO of the screen
write one module and in that
write as
loop at it_tab based on where condition.
display_name = it_tab-field(desired)
endloop.
automatically the desired value will be displayed
plzz reward if usefull..
for any further quiries my mailid [email protected]
plzz dont forget to reward.

Similar Messages

I just got new screen put on my 13in macbook pro when i opend it up there is no data on it? how do i get my data back

I just got to school after getting a new screen put on my 13in macbook pro. when i opend up my macbook there was only a apple simble and the loading sing with a bar at the botton it took fovere to load, one it loaded and opend up there was a few options to pic from saying i could get all my datata back, i got confused and called the tec support where they wanted me to spend 90$ to back up my data, i feel as if they fixed my screen my data should be there when i go on it. I am a broke colage studend and need to get my work done. To sum it all up How do i get all my data back that happend to get lost while my screen was being repaird at the apple store?

Apple has a 90 warranty warranty on all of their repairs. You should take your computer back to the repair shop. Or call Apple Customer Relations (800) 767-2775. Wait for a human to come on the line and ask politely and firmly that you want to be transferred over to the Customer Relations department. Tell them your issue.
pakoning wrote:
I am a broke colage studend
Hard to believe with all the typos in your post!

Need Help to create new screen for RF Sapconsole

Hi Guru's
I'm new on RF (but some years in ABAP) since last week.
I need help to create new screens for RF (SAPLLMOB).
Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
I have to develop 2 new screens with really few time.
And, another subsidiary question :
how SAP can transfert information between the flash gun and the screen i have developped.
Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
It's a new strange world for me today...
Many thanks to everyone who can explain me
Alain

hi,
I am facing this problem as well. Is there any reference to create the new screen?
Hope someone can help! Thanks!
Regards,
Darren

TS1398 I recently got a new screen for my iPhone 4s and now no wifi networks are showing up when I turn the wifi on.

I tried resetting my networks and turning my phone on and off with the wifi turned on, but neither of it worked. I don't know what to do and I really need wifi on my phone for tomorrow.

Did Apple install the new screen? Or an Authorized Apple Service Provider? If so, you should return to the location that replaced your screen to see if they didn't hook something up properly.
If it wasn't an Authorized Apple Service Provider, or an Apple Retail store, You should take it back to them and discuss it with them. In this case, Apple will likely not offer any replacement service as it was opened by an unauthorized third party.

My IPhone 5 will not turn on, I had a new screen I stalled, all working great, the next day I was flying so turn off the phone and since trying to turn back in again,,, I receive many lines of white text stating incorrect shutdown please help

hhello, please help if you can,,,
i had a new screen installed, everything working fine, as was using the phone, the next day I was flying so turn off the phone in the usual way...
oon arrival turned the phone on, received a slow acting black background with the apple sign visual, but never moved from that......... So tried a reset still the same just left looking at the apple sing in the middle if the screen,makes it there for 5 mins but still never turn on completely,,,,,
again I tried,,,,,, again I tried a reset, then started to received lines of white writing, about 4-5 lines slowly like it was being typed, which stateed INCORRECT SHUTDOWN, ????????? then took out my MacBook air, to connect to ITunes to see whaypt I could do,
i tunes did not find the phone as would normally so opened ITunes manually, still did not find the Iphone,,,,,
Any Ideas please, as it is useless stuck in the drawer, I am an apple user, an quite knowledgable having other Iphine 5, IPad air and Mac,,,,, I am stuck,,,,
PLease Help,my hank you in advance

SharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

Hi j2399123,
It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
For the QuickTime recording options, check out "Recording with QuickTime Player" in
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
And for screen recording specifically, there's
QuickTime Player 10.x: Record your computer’s screen
http://support.apple.com/kb/PH5882
Thank you for thinking of Apple Support Communities for your support needs.
Nubz

My ipod touch 5 is frozen on the lockscreen and i cant do anything except restart it and that doesnt hekp. will getting a new screen help? or is there another, less exspensive way? also, it is not connected to wifi.

I need to fix my ipod and i don't know how, i am hoping that if i leave it alone over night that it will fix itself,
its on the lock screen and i cant do anything with the screen, i tried restarting it and it didnt work, so because i restarted it, it is not connected to wifi.
please help.
will getting a new screen help? or is there an easier, less expensive way?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iphone 5 has a black screen keeps vibrating when goes on charger i think lcd is broke and screen will me getting a new screen fix it everytime i plug it to the computer mu picture and music pops up and ny new screen is coming tomorrow

my iphone 5 is making me cry everytime i put it on the charger it vibrates like every 2 seconds my phone isnt water damaged so i dont have to worry about that and when i plug it to the computer itunes recognizes my phone i think the lcd is broken so i went and orderd a new screen from amazon do you think it would work if i place a new screen on it HELLLLLLLLLLLLLLLLLLLLLLLPPPPPPP PLEASE

**called applecare.
Did the tests and they ended uo recommending i go to the apple store..
Not sure if it was a soft/hardware prob but they replaced my phone
fo free

How do I get my widgets to come up on my desktop not on a new screen

how do I get my widgets to come up on my desktop not another screen

System preferences > mission control > uncheck "show dashboard on a new screen"

How can I create a new screen to upload an attachment in SRM?

Hi everyone,
I need to create a new screen that will upload a new attachment in a BID.
I already know how to create the screen and ITS.
According the standard screen 0100 in program SAPLBBP_PDH_TEXT, I need an applet called "CFILESAPP" and then use this to upload to the abap program.
This is everything i know.
Does anybody knows anything else?
thanks,
Oscar.

Hello MotionBoy,
There are two ways to go about creating a new thread to run a step. The first is to create a new sequence, into which you put the LabVIEW step you want to run and any other steps that may go along with it. Then use a sequence call step to call this newly created sequence. Set the Execution Options of the Sequence call step to 'Use New Thread.' This will allow you to run a set of steps in a new thread, not just a VI. The second method, which is only available for a LabVIEW VI, is to use the “Run VI Asynchronously” step. This can be accessed if you right-click within your sequence and select Insert Step » LabVIEW Utility » Run VI Asynchronously. This step will allow you to call a VI and have it automatically open in a new thread. You can further customize this step by opening the configuration menu in the Step Settings.
To address the current behavior of your steps I would like to know if the modules in steps 1 & 2 pass data between them or it would be desirable for them to do so? If so you are going to need a more complex synchronization structure such as TestStand/LabVIEW queues. There is a simple example you may want to look at in the TestStand examples, under the Synchronization folder that demonstrates how to use queues. Otherwise the above solution should be all you need.
John B.
Applications Engineer
National Instruments

How to get selected rows in a new screen in alv.

Hi everybody,
I have a alv report in oops concept when i select a row all the details of that particular row should come in new screen.
can anybody help me regarding this if possible with example.
thanks in advance.
regards,
venu.

Hi,
Check this.
select several rows in alv
It will be helpful.
Regards,
J.Jayanthi

Ipod touch 4th gen needed a new screen and sleep/wake switch. So, I replace them. I was able to get to settings and do "erase all content and settings". I am not able to totally shut this device off as it keeps restarting after a few seconds.

Ipod touch 4th gen needed a new screen and sleep/wake switch. So, I replace them. I was able to get to settings and do "erase all content and settings". I am not able to totally shut this device off as it keeps restarting after a few seconds. I have used itunes to restore and also recover. Device will actually shut off and stay shut off if I leave it connected to the computer. The moment I unplug (3 seconds) the apple logo appears, it boots, unlock screen appears, I can unlock and operate normally, unplugged or not. Just cant get it to completely shut down unplugged. Any thoughts?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem. Maybe you installed a bad component or damaged something during the repair/replacement.
Apple will not help since you worked on the iPod yourself.

IMR7 : Creation of a new Screen Variant does not save Layout

Hello,
In IMR7, if I create a new screen Variant with a modified the default Layout field, the next time I log-in to SAP, system does not recognize my Layout selection.
Do you have a suggestion?
Thanks
François

Hello,
Thanks for your support but it did not resolved my problem.
When I save Layout I have three fields:
-Layout name
-User-specific checkbox
-Description
Even though User-specific is not checked, next time I relog to SAP and choose my Variant, the layout I have chosen in this variant is not keeped in memory. A layout named 4_SAP_IM is always displayed.
Do you have the same behavior?
Thanks
François

Function of HOLD DATA in the settings for creation of a new screen.

Hi,
Since i'm new to ABAP and still learning my way through, i would really appreciate if somebody can help me out with the exact functioning of selecting the check box 'HOLD DATA' under the settings option while creation of a new screen.
Thanks for any help extended.

Take simple scenario of SE38. The Screen for the transaction has the Flag "HOLD DATA" as Ticked.
Now enter some program name on the field and Click - Utilities-> User Profile -> Hold data.
Now come out of the transaction, go back to the same transaction. The name of the Program that you entered earlier will appear on the input field.
So if the screen doesn't have "Hold Data" set the functions of HOLD data, SET DATA, DELETE data will not work.
Also try using SET DATA For the Program input field.
SAP Help :
If you activate this option, the following functions are supported for the screen at runtime:
System -> User profile -> Hold data
-> Set data
-> Delete data
The Hold data function allows you to hold onto any entries you have made on the screen. When the screen is next processed (even in a different mode), the system then automatically redisplays the data in the input fields.
If the option is not activated, these functions are ineffective at screen runtime.

I have the 5.5 Lightroom software on my I-Mac with OS-X, 10.9.3. It seems I have lost 850 pictures I was developing. It all started when was adding a folder. A new screen came up with no photos. I went back to my external drive, trying to open the folder

I have the 5.5 Lightroom software on my I-Mac with OS-X, 10.9.3. It seems I have lost 850 pictures I was developing. It all started when was adding a folder. A new screen came up with no photos. I went back to my external drive, trying to open the folder (containing the pictures I was working on), an icon "Thumbs" came up. When I click on it, a message "can't find the application" came up, there is no picture to be found. Please help. Frustrated-George

Have you tried resetting the SMC ? > Resetting the System Management Controller (SMC)

How to Open new screen for single click on ALV icon.

Hi All,
Can any body help me regarding the below ALV requirement.
I need to create a executable program ZPROGRAM with a table having field to store long text.The ALV report should display records according to the selection screen parameters with a icon in each record when clicked should open a new screen with present data in the field and must be able to save the entered long text.
Can any body give me the idea after displaying the simple ALV in the output,
How to open new screen(not the Pop-ups) after single click on the icon,
in that I should be able to modify & save the long text in my ZTABLE and
able to retrieve the same text for single clicked icon record.
which function modules/Classes/Methods can we use for this requirement.
And how retrieve the same text for this record.
Thanks in advance.
Regards,
Kalam A.

*& Report ZTEST_ALV
REPORT ZTEST_ALV.
TYPE-POOLS slis.
DATA: gt_fieldcat TYPE TABLE OF slis_fieldcat_alv .
DATA: gs_layout TYPE slis_layout_alv.
DATA: gt_list_top_of_page TYPE slis_t_listheader.
DATA: gt_sortinfo_alv   TYPE slis_t_sortinfo_alv.
DATA: gs_print_alv TYPE slis_print_alv.
DATA: gs_grid TYPE lvc_s_glay.
DATA: gt_event TYPE slis_t_event.
DATA: gs_event TYPE slis_alv_event.
DATA: BEGIN OF GT_DISPLAY OCCURS 100.
   INCLUDE STRUCTURE MARA.
   DATA: BOX.
DATA: END OF GT_DISPLAY.
START-OF-SELECTION.
SELECT * FROM MARA UP TO 50 ROWS
INTO CORRESPONDING FIELDS OF TABLE GT_DISPLAY.
End-of-Selection.
PERFORM build_alv.
PERFORM display_screen .
FORM build_alv .
DATA: ls_fieldcat LIKE LINE OF gt_fieldcat.
DATA: ls_top TYPE LINE OF slis_t_listheader.
DATA: ls_sort TYPE slis_sortinfo_alv.
CLEAR: ls_fieldcat, gt_fieldcat[], ls_top,gt_list_top_of_page[],
         ls_sort,gs_grid,gs_print_alv,gt_sortinfo_alv[].
*&-----gs_layout definition.
gs_layout-zebra = 'X'.
gs_layout-detail_popup = 'X'.          "ÊÇ·ñµ¯³öÏêÏ¸ÐÅÏ¢´°¿Ú
gs_layout-f2code = '&ETA'.             "ÉèÖÃ´¥·¢µ¯³öÏêÏ¸ÐÅÏ¢´°¿ÚµÄ¹¦ÄÜÂë,ÕâÀïÊÇË«»÷
gs_layout-no_vline = ' '.              "ÉèÖÃÁÐ¼ä¸ôÏß
gs_layout-colwidth_optimize = 'X'.     "ÓÅ»¯ÁÐ¿í
gs_layout-detail_initial_lines = 'X'.
gs_layout-coltab_fieldname = 'LINE_COLOR'. "Line_colorÎªgt_displayµÄÒ»¸ö×Ö¶Î,¾ßÌåÑÕÉ«ÉèÖÃ¼ûÏÂÃæËµÃ÷.
gs_layout-hotspot_fieldname = 'MATNR'.
gs_layout-detail_titlebar = 'ÏêÏ¸ÄÚÈÝ'. "ÉèÖÃµ¯³ö´°¿ÚµÄ±êÌâÀ¸
gs_layout-group_change_edit = 'X'.
*&-----gs_grid definition.
gs_grid-top_p_only = 'X'.
*&-----gs_print_alv definition.
gs_print_alv-prnt_title = 'X'.
gs_print_alv-prnt_info = 'X'.
*&-----gt_sortinfo_alv definition. Ð¡¼Æ
ls_sort-fieldname = 'MTART'.
ls_sort-tabname = 'GT_DISPLAY'.
ls_sort-subtot = 'X'.
ls_sort-spos      = 1.
ls_sort-up        = 'X'.
ls_sort-group = 'UL'.
APPEND ls_sort TO gt_sortinfo_alv.
ls_sort-fieldname = 'AENAM'.
ls_sort-tabname = 'GT_DISPLAY'.
ls_sort-subtot = 'X'.
ls_sort-spos      = 1.
ls_sort-up        = 'X'.
ls_sort-group = 'UL'.
APPEND ls_sort TO gt_sortinfo_alv.
*&-----slis_t_listheader definition. title.
CLEAR ls_top.
ls_top-key = 'µ±Ç°ÈÕÆÚ:'.
ls_top-typ = 'S'. " H = Header, S = Selection, A = Action
CONCATENATE sy-datum0(4)   '-' sy-datum4(2) '-' sy-datum+6(2) INTO ls_top-info .
APPEND ls_top TO gt_list_top_of_page.
CLEAR ls_top.
ls_top-key = 'title'.
ls_top-typ = 'S'. " H = Header, S = Selection, A = Action
ls_top-info = space.
APPEND ls_top TO gt_list_top_of_page.
*&-----gs_print_alv definition.
gs_print_alv-prnt_title = 'X'.
gs_print_alv-prnt_info = 'X'.
*&-----gt_fieldcat definition.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
   EXPORTING
     i_program_name     = sy-repid
     i_internal_tabname = 'GT_DISPLAY'
      i_structure_name = 'MARA'
      I_CLIENT_NEVER_DISPLAY = 'X'
     i_inclname         = sy-repid
   CHANGING
     ct_fieldcat        = gt_fieldcat[]
   EXCEPTIONS
     inconsistent_interface = 1
     program_error          = 2
     OTHERS                 = 3.
ls_fieldcat-hotspot = 'X'.
MODIFY gt_fieldcat FROM ls_fieldcat INDEX 2.
**-1. definition with macro.
DEFINE macro.
   col_pos = col_pos + 1.
   ls_fieldcat-tabname   = 'it_typ_data'.
    ls_fieldcat-fieldname = '&1'.
    ls_fieldcat-seltext_l = &2.
   ls_fieldcat-col_pos   = col_pos.
    ls_fieldcat-outputlen = '&3'.
   ls_fieldcat-datatype = '&4'.
   ls_fieldcat-do_sum    = &5.
   ls_fieldcat-edit    =   &6.
   ls_fieldcat-checkbox =   &7.
   ls_fieldcat-key   =   &9.
   ls_fieldcat-fix_column = &10.
   ls_fieldcat-no_out = &11.
    ls_fieldcat-ref_fieldname = &4.    " System F4 Effect.
    ls_fieldcat-ref_tabname   = &5.   " System F4 Effect.
    ls_fieldcat-hotspot   =   &6.
    append ls_fieldcat to gt_fieldcat.
    clear ls_fieldcat.
END-OF-DEFINITION.
macro matnr     'matnr'            18   'MATNR'   'MARA' 'X'.
macro MTART     'MTART'            18      'MTART' 'MARA' ''.
macro AENAM    'AENAM'            18       'MAENAM' 'MARA'   ''.
**-2. definition one-by-one.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'MATNR'.
ls_fieldcat-seltext_s = 'ÎïÁÏ'.
ls_fieldcat-ref_fieldname = 'ROLLNAME'.
ls_fieldcat-ref_tabname   = 'DD03L'.
APPEND ls_fieldcat TO gt_fieldcat.
ENDFORM.                    "build_alv
FORM display_screen .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   EXPORTING
     i_list_type     = 0
   IMPORTING
     et_events       = gt_event
   EXCEPTIONS
     list_type_wrong = 1
     OTHERS          = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_event INTO gs_event WITH KEY name = 'TOP_OF_PAGE'.
IF sy-subrc EQ 0.
   gs_event-form = 'TOP_OF_PAGE'.
   MODIFY gt_event FROM gs_event INDEX sy-tabix.
ENDIF.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
     i_callback_program                = sy-repid
    i_callback_pf_status_set          = 'PF_STATUS_SET '
     i_callback_user_command           = 'USER_COMMAND'
    i_callback_top_of_page            = 'TOP_OF_PAGE'
   I_CALLBACK_HTML_TOP_OF_PAGE       = 'HTML_TOP_OF_PAGE'
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
    I_BACKGROUND_ID                   = 'ALV_BACKGROUND'    "When top-of-page is initial.
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
     is_layout                         = gs_layout
     it_fieldcat                       = gt_fieldcat[]
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
    it_sort                           = gt_sortinfo_alv[]
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
   I_SAVE                            = 'A'
IS_VARIANT                        =
IT_EVENTS                         = gt_event
IT_EVENT_EXIT                     =
   IS_PRINT                          = gs_print_alv
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = gt_display
EXCEPTIONS
   program_error                     = 1
   OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "display_screen
FORM user_command          USING ucomm LIKE sy-ucomm
                           selfield TYPE slis_selfield.
Data ref1 type ref to cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR' "Check Box need fieldcat-checkbox, input and edit.
     IMPORTING
       E_GRID = ref1.
CASE ucomm.
    WHEN '&IC1'. " SAP standard code for double-clicking
READ TABLE gt_display INTO gs_display INDEX slis_selfield-tabindex.
CHECK sy-subrc = 0.
     CASE selfield-fieldname .
       WHEN 'PLNUM'.
         SET PARAMETER ID 'PAF' FIELD gs_display-plnum.
         CALL TRANSACTION 'MD12' AND SKIP FIRST SCREEN.
       WHEN 'POSNR'.
       SUBMIT rvscd100 USING SELECTION-SCREEN '1000' WITH vbeln = gs_display-vbeln
                                                      WITH posnr = gs_display-posnr
                                                      WITH zinfo = 'X'
                                                      AND RETURN.
     ENDCASE.
   IF selfield-sel_tab_field = 'OUT_ITAB-PI_SL'. " Line detail.
       READ TABLE i_output INTO pisl_itab INDEX selfield-tabindex.
       IF sy-subrc EQ 0.
   ENDIF.
    WHEN 'CHANGE'.
     CALL METHOD ref1->check_changed_data.
     CALL METHOD ref1->refresh_table_display.
*5´Ë´¦´úÂë×èÖ¹'REUSE_ALV_GRID_DISPLAY´´½¨ÐÂµÄÆÁÄ»£¬Ôì³ÉÆÁÄ»¶à²ã
     selfield-refresh = 'X'.
    WHEN 'SWITCH'.
     PERFORM switch_edit_mode.
    WHEN OTHERS.
ENDCASE.
ENDFORM.                    "user_command
Add your code in user_command form.
WHEN you click matnr ucomm eq '&IC1'.
Message was edited by:
        Chunhai Hu

New screen

Similar Messages

Maybe you are looking for