New Seagate 1.5 Tb Hardrive problem when clicking on hardrive icon

I recently installed the new Seagate 1.5 TB hardrive into bay 4 and installed OS 10.4.11 on it. It worked fine for a few days, but then started doing this: when I double click on the hard drive icon on the desktop, to open and view the contents, it briefly opens then flashes closed. The hardrives in the other three bays open normally when I click on the icons. I repaired permissions but this didn't help, so I re-installed the operating system. It worked fine for about a week, but now is doing the same thing. Before I send it back, any suggestions that might fix the problem?

Seagate now lets you check the serial number on their website, so you don't need to use the Windows drive check.
Use the Serial-ATA section of System Profiler to determine the serial number and current firmware version (Revision), then start at step 2 of:
<http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207931&Hilit e=>
This will tell you the required firmware, but you still need a Mac Pro or Windows computer with SATA to install it. You could try contacting the supplier of your drives to see if they will update them for you.

Similar Messages

Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

I have been a happy user of Firefox for many years. Around last April first I opened Firefox and was offered an update to v 4.42.0.0 which I accepted. Installation seemingly went well. I forget now exactly what happened but the result has been that ever since April 1 I haven’t been able to open the Firefox browser when clicking on the Firefox icon. My computer now was running very slowly. I tried to uninstall Firefox, but a popup told me I couldn’t because Firefox was in use. This confused me because I couldn’t see it being used. Only now I have found that on Task Manager processes that “firefox.exe” was consuming 99 % of the CPU. After removing firefox.exe by clicking End Process my computer ran better. I uninstalled Firefox I had on my computer and installed Firefox 5.0. Unfortunately I have the same problems: Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

Born2die! Brilliant. I am a desktop clicker and never knew Firefox had a safe mode.
Thank You!
I was unable to start in safe mode initially. The second time I disabled all of the Add-Ons and she started up just fine. I enabled them one by one hoping to track down the culprit but the problem seems to have gone away.
BTW I am running ver. 3.6.8 (in response to cor-el's earlier post) and
Firefox is in the process of downloading 3.6.10 (which I am starting to think may have been what caused this whole problem to begin with)
Incidentally, whats up with all of the Java Console Add Ons?
I have:
Java Console 6.0.11, Java Console 6.0.13, Java Console 6.0.15
Java Console 6.0.17, Java Console 6.0.20, and Java Console 6.0.21
What are they? Do I need them? Can I uninstall them? Is this due to using Open Office?
Also, .NET Framework 0.0.0 Should I uninstall it?

When click the email icon on my iphone, it opens on one email only. I can not go to the next or previous email, a different email or anything. It only gives me the option to move that email! How can I stop this. Its been working perfectly well before!

When click the email icon on my iphone, it opens on one email only. I can not go to the next or previous email, a different email or anything. It only gives me the option to move that email! How can I stop this. Its been working perfectly well before!

Now as you may know there is some icons at the bottom of the mail app, at the top left conner you should have the inbox button and on the upper right conner you should have two arrows to shift between emails. If any of those options works try :
Settings>General>Reset>Reset all Settings
If that does not work try to re add the account
Last but not least, restore as new.
Hope that helps.

When clicked on an icon in the infopath form, it will open another infopath form from another file. How do?

When clicked on an icon in the infopath 2013 form, it will open another infopath 2013 form from another
file. How do?

Hello Eugene Astafiev!
I need the following scenario:
I have a Sharepoint library with items created by Infopath (form A).
I developed another form (form B) that will query items created by form A.
The form B will be in a static "webpart" page navigation (Sharepoint). One of these fields returned by the query library that manages the items created is the URL responsible to load the item data . I would like to parameterize the URL into form B.
So that when the user clicks on it, the form A with their respective data in a modal is returned (which may be a native modal Sharepoint)

Problem when trying to move icons on desktop

Hello experts,
I have a macbook Air with OS X 10.9.2.
I have a problem when I try to move any icon on the desktop.
To move an icon I need to select it, and drag it to the new positon, it then returns to the same position, after iff I unselect it and select it again, it apears on the position I drag it before.
could any one give me some help about this?
Many thanks in advance.
Regards,
José Alves

Take these steps if the cursor changes from an arrow to a white "prohibited" symbol when you try to move an icon on the Desktop.
Sometimes the problem may be solved just by logging out or rebooting. Try that first, if you haven't already done it. Otherwise, continue.
Select the icon of your home folder (a house) in the sidebar of a Finder window and open it. The Desktop folder is one of the subfolders. Select it and open the Info window. In the General section of the window, the Kind will be either Folder or something else, such as Anything.
If the Kind is Folder, uncheck the box marked Locked. Close the Info window and test.
If the Kind is not Folder, make sure the Locked box is not checked and that you have Read & Write privileges in the Sharing & Permissions section. Then close the Info window and do as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
xattr -d com.apple.FinderInfo Desktop
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You should get a new line ending in a dollar sign ($). Quit Terminal.
Relaunch the Finder.
If the problem is now resolved, and if you use iPhoto, continue.
Quit iPhoto if it's running. Launch it while holding down the option key. It will prompt you to select a library. Choose the one you want to use (not the Desktop folder.)

When clicking the itunes icon on my left side of screen a window pops up and says i need to disable the compatability, I tried to do this from what it prompted me to do, but it still say problem unresolved

I have not been able to access the itunes store for the past month, it has been a long time since I have downloaded/purchased anything, probably around christmas time, but the problem is I click on the itunes store and the grey zebra striped bar just keeps running accross the top indefinitely, one other thing is that when I click on my itunes icon on the left side of my screen a window pops up and tells me to turn off compatibility, so I tried to follow the prompts through the properties from right clicking the itunes icon but after the thing runs its check and i click on make suggested changes, it still says incompatible. I have no idea what to do and this is extremely frustrating, please help!!

Refer to this artile:
iTunes for Windows: How to turn off Compatibility Mode
http://support.apple.com/kb/TS1489
For Windows 7, make sure all boxes in Compatibility tab are unchecked.

Firefox won't start whenI click on the icon; info on help page doesn't help

I have Windows XP and Verizon Internet Security Suite. I've installed Firefox twice (with an uninstall in between) and it still won't load when I double-click on the icon. It runs fine on my other laptop with same OS and same anti-virus/firewall. Info on help page doesn't actually address this problem, even though the headline indicates it does.
== This happened ==
Every time Firefox opened
== Firefox has never actually opened. I double-click the icon and nothing happens. Check task mgr, it's not listed. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

See my update at 6:46PST - having the very same problem on a MacBook Pro. Someone named "Sherry" posted around 5:42PST w/ same problem. No techies are picking up on these posts, though. Please add a comment to mine as well to keep it at the top and see if we can get some visibility to what is obviously a bug.
Did you upload a new version/update? That is what caused my problem

Is it be true to say a good and not corrupted crystal report always has the option to generate a PDF when click the printer icon on the Crystal toolbar ?

''please stick with your original questions thread about Crystal Report - https://support.mozilla.org/en-US/questions/970077 - locking this thread''l
When i unistall and again install a fresh Crystal report for .Net 4.0 Its ok to generate only to pdf option when click to the print icon on crystal report viewer but in another computer it is promting the old fasion like "a dialog with many option" ,But if want to have a only option to generate only to pdf option what should i have to do when my project and crystal report is at Window server 2008 R2,Please suggest a requred answer?

Firefox will update in increments when you use such old versions. The best thing to do is to go to www.getfirefox.com, and download Firefox 19.0.2. This is going to be much faster than updating to 3.0.19, then to 3.6, then 12, then 19 (which is the current process).

Viewing problem when clicking on new instrument

Hi
Here's a screen shot, don't know why this is. How do I fix this?
Thnx

You could choose create and than, if you don't like the result, delete the program from your hard drive. On the other hand you also could watch a few Youtube movies on the subject 'How to ……….. in Logic Pro 9'.
Have a nice day!

Problem when clicking links add tabs occur

Hello
i have been having some problems lately ( 3 days now ) what is weird since i haven't installed in a while.
that when i click a link a different tab opens and redirects to a add website.
i also see when i get a pop up its first a different website link that the it redirects to but then in less than 2 millisec it changes to a different add.
here is a report of my computer if this can help finding the cause
http://pastebin.com/fXPWnE02
i've been reading the forums for the problem and it seems im infected with one of a malware but i believe its a new generation cause i'm unable to find it and delete it
if someone could help that would be great !
thank you for your time

You don't have any known kind of adware. You do have something called "soluto" that I've never seen before. I'm not sure what it is.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

New url not displaying in location bar when clicking on a link

This is a peculiar issue I have just noticed. Since upgrading to FF v4.0 RC1, It seems whenever I click on a link either in a webpage or in a google search (even opening a bookmarked link), when the new page opens, the url of the new page does not appear in the location bar. Instead, the previous page's url still shows in the location bar.
Has anyone else noticed this?

Probably an extension incompatibility. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Problem when clicks on class manager in sunone server on solaris operating

we have succefully deployed an application in iplanet server on solaris operating system. The deployed application is working fine. Now the problem is when I loged in as admin and clicks on class manager we are getting "page cannot be displayed" error . we are unable to find how to resolve this.
here we are accesing system from remote place.is there any privilages required to resolve this issue.

As far as I know Class Manager is a general predeployed web application and everything should be in
administration server's log/s.
So customize Error Log Preferences on
Administration Server -> Preferences page
and check what is going on.
Probably it's also worth to ask at Sun Java System Web Server forum:
http://swforum.sun.com/jive/forum.jspa?forumID=16

Problem when clicks on class manager in iplanet server on solaris operating

we have succefully deployed an application in iplanet server on solaris operating system. The deployed application is working fine. Now the problem is when I loged in as admin and clicks on class manager we are getting "page cannot be displayed" error . we are unable to find how to resolve this.
here we are accesing system from remote place.is there any privilages required to resolve this issue.

As far as I know Class Manager is a general predeployed web application and everything should be in
administration server's log/s.
So customize Error Log Preferences on
Administration Server -> Preferences page
and check what is going on.
Probably it's also worth to ask at Sun Java System Web Server forum:
http://swforum.sun.com/jive/forum.jspa?forumID=16

MSS problem when clicked on reports

Folowing error generated when i click on reports in MSS buisness package :-
com.sap.tc.webdynpro.progmodel.controller.MessageManager$AbortMessageManagerException: Role: MSS instance: REP NOT_FOUND
wot wld be prob and do let me knw solution

The Backend configurations must be done by the functional consultants and any settings or config on the portal can be done by the portal administartors.
now depending on wether what application is it your functional consultants will also change i.e if it is compensation management then backend config will be done by the payroll consultant if it is realted to attendance the it must be done by the time consultant.
now if you want to activate PCR's then you will have to take there help understand the process identify the
PCR used in it and self configure it.
as i have said earlier it depends on case to case and application to application first identfiy the apllication waht you want to hit first then run it if now sucess then configure it. Use the below link for config help on MSS
MSS https://websmp202.sap-ag.de/mss
https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000081981&
http://help.sap.com/saphelp_erp2004/helpdata/en/0f/8b3b40b1607a56e10000000a1550b0/frameset.htm
Manager Self-Service
http://help.sap.com/saphelp_erp2004/helpdata/en/0a/8b3b40b1607a56e10000000a1550b0/frameset.htm
if still you are not able to then post a query on SDN and we help you.
Cheers!!
SJ

Problem when clicking refresh button

When I click browser refresh button, i get two 25005 errors.
Otherwise, app works ok.
Any ideas how to debug this?

JAK,
It sounds like you have not terminated further processing in the form. Try adding 'RAISE Form_Trigger_Failure;' after your GO_BLOCK(); call. This should ensure no further processing is done after you navigate to the specified block.
Hope this helps.
Craig...

New Seagate 1.5 Tb Hardrive problem when clicking on hardrive icon

Similar Messages

Maybe you are looking for