New sequence problems

Hello
when i go to make a new sequence, i my picture becomes either small or big
example of big picture, and when i got to export to quick time to put in dvd studio pro it says the file is wrong
/Users/randall/Desktop/Screen shot 2010-10-17 at 2.03.54 PM.png
can some please help me, this is my first time using this discussion so if you respond please email me also thanks [email protected]
Thanks

I need to see the item properties for the clips and for the sequence. Video is exact numbers. I need to see the numbers. Frame sizes, codecs, frame rates.
What it looks like is that you're putting a standard definition video in an HD sequence. Exactly what the media is and what the sequence is I don't know because you will not give the exact information. The information is in the browser. It's in item properties. It's in sequence settings. I told you where to look. Give use some numbers and real information here.
If you're copying and pasting from one sequence to another, you need to tell us the exact specs of the clips in the first sequence, the settings of that sequence, and the settings of the sequence you're pasting into. They don't match. It's got screwed up somewhere along the way, but without knowing what's what we can't tell you how to fix it.
The lines in the canvas are the safe action and safe title area. They have nothing to do with your problem.

Similar Messages

Problem exporting new sequence

I created a new sequence, then I copied and pasted the project from the first sequence. I then made changes in the new sequence.
Now I want to export it as a small QT file to e-mail it to someone.
When I export as a QT file, it works. When I try to export as a "QT conversion" and use "low streaming", it says "movie file "2nd sequence" cannot be found".
Any suggestions?
Thanks
Gerry

Can you take your successfully exported file, open it in QT pro and do the streaming conversion from there?
x

How to use new sequence when one is reached its maxvalue in PL SQL code

Hi,
Currently, I am populating a unique product serial number in a table column using a sequence call to generate new number. For different products, I have different sequences and in my PL SQL code usiing IF..Else block I populate serial number for different products. For one most selling product sequence, we are reaching a Max value in production in a month and to make sure that application will continue to work fine for various end users without getting any error on their screens, I want my code to switch to new sequence automatically. I just need to add another if condition but my problem is how to find accurately when max value is reached for old sequence.
As call to old sequence can happen in different sessions there could be inconsistency and can end up at error. My new sequence value has to start with AV1000. Please suggest.
My old sequence look like this :
SEQUENCE Prd
INCREMENT BY 1
START WITH AS1000
MAXVALUE AS9999
MINVALUE AS1000
CYCLE NOCYCLE
CACHE 2
Order Yes;
Edited by: user11695088 on Jul 15, 2009 12:14 AM

Catch the exception and use your new sequence. But somehow, I'm not liking your alternative approach.
SQL> set line 300
SQL> set pages 50000
SQL> set serveroutput on
SQL> create sequence testing_seq increment by 1 start with 1 maxvalue 3
2 /
Sequence created.
SQL>
SQL> create or replace procedure test_seq_proc(p_seq out number)
2 is
3 begin
4     select testing_seq.nextval
5     into p_seq
6     from dual;
7 --
8     dbms_output.put_line(p_seq);
9 --
10 end;
11 /
Procedure created.
SQL> declare v_out number;
2 begin
3     test_seq_proc(v_out);
4 end;
5 /
1
PL/SQL procedure successfully completed.
SQL> /
2
PL/SQL procedure successfully completed.
SQL> /
3
PL/SQL procedure successfully completed.
SQL> /
declare v_out number;
ERROR at line 1:
ORA-08004: sequence TESTING_SEQ.NEXTVAL exceeds MAXVALUE and cannot be instantiated
ORA-06512: at "ETL_ADMIN.TEST_SEQ_PROC", line 4
ORA-06512: at line 3
SQL>Cheers
Sarma.

New sequence not conforming to clip settings

I'm using FCP 6.0.6. I've got some iPhone 3GS video clips (shot with the Super 8 app). When I create a new sequence, and then drag one of the iPhone clips to the sequence, the sequence does not conform to the low res iPhone settings. I've tried setting my FCP prefs to "always" and "ask" for auto conform. Neither is working--when set to ask, it doesn't ask, and when set to always, the sequence doesn't conform.
Any thoughts? Thanks.

It would make no sense to enlarge your clips to 1280x720.
The problem is your original material is not in a standard video size.
You might try converting it to ProRes422 while leaving the material in the 480x320 size. Make sure you convert the audio to 48khz as well.
Once converted, create a new sequence and drop one of the newly converted files into it. The timeline sequence should be adjusted to allow for realtime playback.
Good luck.
x

Working in FCP6, open a project, sequence not showing ANY fonts from motion master templates. Start new sequence and they appear fine. Whats up with it?

So here's what I've got: one of the first gen Intel Macbooks with 2gb RAM, running a fresh install of FCS2, fully updated. I pulled out my external with my project on it (saved in the same version), that I keep my demo reel updated on. I've always used the motion text master template files to label each clip and for some reason, this round the text isn't appearing. Let me be clear just how weird this is: the template file will show up in the viewer, but any file set in this sequence will be blank. If there is any graphics to the file, IT shows up, but not the text. I opened up a new sequence and and first added a new master file to it, and it showed up on that sequence. I then went to the old sequence and copy/pasted the clips in it to the new sequence and the text shows up as well. What is up with the original sequence that is causing this issue??? Any thoughts? (unfortunately, my copy of Final Cut is a "Not for Resale" (NFR) so I can't call in for support.
Thanks in advance!!!

Hi Miro,
I was just experiencing a similar problem today. In my situation I was getting the diagonal lines and the new project wasn't actually being trimmed, it was the same size as the original with all of the media from the original project .
It turns out that even though I was selecting 3 specific sequences out of 20 the Project Manager was ignoring that selection, it brought over those 3 sequences but all of the media from the other sequences. I think this is what was creating the problem.
The trim unused media box (or whatever the check box says) was greyed out.
My solution was to create a new clean project and import the 3 sequences I wanted to create a new trimmed project from.
Then using the Project Manager everything worked as expected, the project was trimmed down and there were no diagonal lines. I unchecked the "rename media" option, not sure if that was necessary part of the solution.
This seems like a bug to me, we shouldn't have to create a new project, it's an extra unwanted step and clutter on our systems.
Hope that helps!
I'm on Mac 10.8.5 and Premiere 7.0.1, eagerly awaiting to update once the bug fixes to the bug fixes are fixed.
Gerry

No sound in new sequence

To fix a video resolution problem, I copied all my clips and audio from one sequence into a new sequence. The old sequence plays back perfectly, with the new sequence has no sound. What have I done wrong?
Any help appreciated.

Thanks Jim. Appreciate the post. A little background. When I started this project I could not get any sound out of Premiere at all. Talked to support for a long time and finally updated the audio drivers and this seemed to work. But not completely. The ONE project that I got working had sound, but not if I created a new project. So what I did is save as the working project into different folders then change the name and the clips. This worked, until now.
Back to Premiere support to see what I can do I think.

URGENT: Motion JPEG?? Sequence problems

HI
I have a sequence that instead of having DV PAL in the settings has Motion JPEG A - will this be ok to go into DVDSP for a DVD video project??. This sequence has a few issues with frame size which I've made posts about and trying to rectify.
In the edited sequence I changed the Motion JPEG A to DV PAL, is this ok?? I'm about to try and test this out - but wanted to ask the forum for your urgent advice.
The 1024 x 576 frame size is wrong also - I tried making a new sequence with the 720 x 576 settings and copying and pasting my AV into the new timeline. The template graphic was ok, but the video within it is all stretched!!!
I'm starting to panic now.. as I need to send this off for sound then to the client tomorrow first thing...
Hope you can help.
Cheers, Margie

Hi Karthik,
I'm not trying to create an animation for a webpage. I'm exporting the movie as a JPEG sequence for use in Final Cut Pro (as it's the cleanest way to recreate a flash animation in a movie file format). Exporting as a GIF Animation however creates the same problems as when I export as a JPEG sequence... the timelines within timelines (movie clips) don't move at all (the movie clips are animations of various carbon molecules moving in a larger animation of a lot of other things going on). Also, exporting as a GIF Sequence yeilds the same result... foreground elements move while background elements (movie clips) don't move. Strangely, everything DOES move when it's exported as a SWF file... except I can't use a SWF file. I've already tried exporting the file as a MOV file and it's too graphic-intensive and causes a lot of freezing in the animation when it renders as a MOV file, and when I try using various 3rd party SWF converters to convert the file to .MOV or .DV format, it also gets bogged down by the heavy graphics and freezes and skips.
The only way that it works is when I export it as a JPEG sequence because the computer doesn't have to render it in real time, but for some reason, movie clips within the timeline won't play. I'm hoping someone here knows a way around this, or a setting I can toggle to make it work. Any info would be appreciated. Thanks for trying though Karthik!
Chris

Insert menu item blank in sequence editor for new sequence

In TestStand 2.0.1, when I create a new sequence file using the sequence editor and right-click to insert a step, the Insert menu is greyed out.
If I open an existing sequence file, copy a step from it, and paste it into the empty sequence, then whatever that step was (let's say Action) becomes available on the Insert menu.
Is there any way to fix this other than re-installing TestStand? Any idea why this is happening?
Thanks,
Gizmogal

Hi,
This sounds like you have a problem with your type Palette files in sowe way.
Check out if you can read the ini files found in teststand\cfg\TypePalettes.
Regards
Ray Farmer
Regards
Ray Farmer

Why does Adobe Premiere CC crash whenever I put a new sequence in?

Just tonight, while editing for my short video with my new capture card, an interesting problem occurred. Whenever I paste a clip of any kind, no matter the format or the quality, I put it into a new sequence and it takes just 3 seconds to crash adobe immediately. I've tried with other files and even on previous projects, they'll do the same thing. How did this happen and really, how can I fix it?

I just got this computer in December. I have been using CS5 with no problems at all. Yesterday, I tried to save a very simple file to the desktop and illustrator crashed. It is happening any time I try to save the file to anyplace other than the one file that comes up when I use the "save as" or "save" command. Its happening no matter how small the file is.
I have already removed almost everything from my desktop as one person suggested. I have uninstalled illustrator, run the cleaner program, restarted and re installed illustrator. I have updated illustrator to the current version.
I am using osx yosemite 10.10.2
I have 16 g of memory.
I have 258G free out of 500G total of storage.
I am at a loss.
Do you know why it would be crashing?
Please help.
Thank you.

I am trying to make a subclip but it makes a new sequence

When I mark in and out points and click on "make subclip", it instead makes a new sequence. Any ideas?

I just discovered I need to double click on the clip first! Problem solved.

Premiere Pro crashes after making a new sequence from media file

Every time I upload a video file and make it into a new sequence, a message pops up saying, "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I've already re-installed the program, and checked to see if I had SP1 which I do. The crash report says:
Faulting application name: Adobe Premiere Pro.exe, version: 8.2.0.65, time stamp: 0x5486db4a
Faulting module name: OpenCL.dll_unloaded, version: 0.0.0.0, time stamp: 0x50eb1a5b
Exception code: 0xc0000005
Fault offset: 0x000007fee3d916a0
Faulting process id: 0x18b4
Faulting application start time: 0x01d01f2d436f22a0
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
Faulting module path: OpenCL.dll
Report Id: d2fb308f-8b20-11e4-80e1-d897ba034251
Any ideas on what I can do to get it to work again??

In light of the faulting module (OpenCL.dll) and the exception code (0XC000005), I'd start by updating the graphics driver--manually through the card manufacturers site--or, if it's a laptop, from the computer manufacturer's site. Don't rely on Windows to get you the latest. If that doesn't work, try switching the Renderer to Software Only [File>Project Settings>General].
If those measures don't work, then check the suggestions in this article: Computer tricks and tips: How to Fix 0xC0000005 Error

Wrong sequence settings used on my timeline; can I copy the timeline to a new sequence with correct settings?

The clip properties are Frame size 1440x1080, 23.98 fps (yes a problem for FCE), Compressor: Apple Intermediate Codec, but unfortunately I did all of my hard work on a 30 minute film on a sequence that has SD settings (Frame size 720x480), 29.97 fps, compressor: DV/DVCPRO- NTSC. I first noticed there was a problem when I could only get the exported quicktime movie to appear as a 4:3 when it was supposed to be a 16:9. I have overcome that problem by exporting using quicktime conversion and customizing the settings to reflect the correct item properties of the original clips.
But my concern is that my project is still fundamentally based on a timeline that was created in a sequence with SD settings and that maybe I have lost some resolution quality. I am sitting here looking at the iDVD preview and I am not always sure it looks as sharp as the same clip viewed in FCE dropped in a sequence with the right settings. But maybe iDVD preview isn't as sharp, or maybe it's just myimagination. Any thoughts?
Ideally, what I would liketo do is to copy my timeline out of the first sequence with the wrong settings,and to copy it into a new sequence with the proper settings. But I am wondering if that timeline is now "infected" with the wrong settings,and brings these over to the new sequence. The guy on the Apple help linetold me this was unfortunately the case. Am I really going to have tocompletely do this work over again to get a completely correct workflow?
Any way around this?

Al,
very much appreciate your time on this. Hopefully just one more question. I am trying to figure out whether or not converting the tremendous amount of footage I have from this project shot in 24p will be worth it. In my mind, it is only worth it, if by not doing it, I will end up with a finished product that does not have as good of a picture quality. At this point, I dont care at all about having the 'film look' 24p is supposed to give you, I just dont the picture quality degraded somehow because FCE doesnt support 24p, and I am using a 29.97fps sequence to edit it.
So with all of that said, my question is this:
1. When you said before that when a clip hits a sequence it conforms to the properties of the sequence, what do you think is happening to the clip? For instance, if the clip in the Browser as you shot it has got 1440 pixels for every 1080 lines and you place it on a 720x480 sequence, is some of that information literally disappearing? That seems hard to believe. I would think that kind of conversion would require a program to execute it and some processing time, but the drag and drop on a sequence is instantaneous. And my HD footage on the SD sequence still seems to look better to me than my SD stuff, although that could just be perception. Same issue with the frame rate. When I drag and drop a 24fps clip onto a sequence set for 29.97 fps, how can the clip now have more frames per second? That would be additonal information that was never captured in the first place. How is that possible? I do believe that the clips are changed in some way that affects the output, but it doesnt seem possible that 'conforming' to the properties of the sequence is the same thing as if you shot the original footage with those sequence settings. Something else must be meant by that right?
2. Will converting the original clips in streamclip change the frame rate..them from 24p to 29.97? If they are still 24p, then don't you still run into the same problem when you edit in FCE? And if they are changed to 29.97, how is that better than just dropping them onto a sequence set to HDV 1080 29.97fps and having it conform to that? What exactly is the upshot of doing the streamclip conversion? Especially if I don't care about the 24p look now.

Video Track in new sequence 50% smaller.

Dear Folks,
I have edited a concert which has four simultaneous video tracks. I have cut and placed in the the V1 track, sections from each of the four camera clips, and it plays "normally" when play it back in the canvas; one shot transitions to another.
I started a new sequence (Sequence 2) to act as a "working copy" of the edited video, and copied all of the tracks of the original timeline into the new sequence. I clicked on the original edited sequence>hit "Select All" >"Copy"> clicked on the new sequence> then "Paste".
When I go to play back the V1 on the new sequence, one of the video tracks (V4) is reduced to about %50, and appears as a smaller rectangle that is centered against a black background.
When I copy and paste onto the original sequence (beginning about 10 seconds after the end of the original edited video), it retains the full size frame for each of the video tracks.
I could go to the Sequence 2 and manually resize each of the "V4" tracks in the timeline, but that seems a bit tedious with 300+ edited shots.
Is there something I can do differently? Is it some glitch in the system?
Any help is appreciated.
Thanks,
Gary

Thanks Tom,
The camera used on V4 is identical to the model camera used on V2, both record to AVCHD, however, one was recorded in "HD HQ" and the other recorded in "HD FH."
Might that be the problem? (Did I just answer my own question?)
If so, why then do all four tracks play in full screen on the original timeline (Sequence 1), but when I copy and paste to Sequence 2, V4 "shrinks" to 50%?
Also, "Removing Attributes" didn't seem to change anything. There was nothing in the "Removing Attributes" window to deselect.
Message was edited by: Gary Markovich

Insert a clip into a new sequence, the clip will not play back

Macbookpro 8G ram twin 2.5 Intel, 1333 Mhz
I am an experienced editor coming over from AVID. This is my second project attempt in Premiere. First was fine. I imported clips that live on my hard drive. When I make a clip selection, mark the in and out and "insert into a new sequence, the sequence will not play back un less I render it first. I am talking about one (1) shot maybe 3 seconds long. I have done no other edits in the sequence and have added no effects but there is an effect icon on the clip in the sequence, This can't be right. It is not the way it worked for my first test project. It would take 40 hours to edit a 60 second spot… What has happened here?
Footage is 1080p 24fps. Short with a digital DSLR and Files are the same (.mov) as in the first project,

I have exactly the same problem. All of a sudden preview window is not working properly. In some projects it only plays audio with gray screen, in some it doesn't plays at all or plays audio from another projects. Sometimes preview gets frozen with the first frame in the project. I can however play video from Event Library, but without any sound. When I create new project and drag clips from Library, it plays with gray screen and again without sound. Restarting iMovie or Mac is no help. I'm using iMovie 8.0.6
Waiting for help desparatly, thank you

Freezing on open new sequence

OS X Yosemite
Version 10.10.2
NVIDIA Quadro 4000 2048 MB
Premiere Pro CC 14 v8.1, Caravan
Every time I try to open a new sequence in my new project I get a window, then a white box, and a spinning cursor. Program freezes. So sad.
Any suggestions?
Thanks

Yosemite sometimes has problems, often related to "default" permissions needing to be changed
-one person's solution https://forums.adobe.com/thread/1689788
-http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/

New sequence problems

Similar Messages

Maybe you are looking for