New server for hyperion

Hi,
I would like to know how can I know which latest patch I should go for Hyperion (9.3.1, Planning, SS, Essbase) or what should be approach? I need to migrate Hyperion servers and will install and configure Hyperion component.
Secondly I know installation, config. backup and migration, but what test should i run for on windows 2003 R2 (i mean, should i need anything like IIS for planning and i don't think there is any need to do with environmental variable as it should create automatically at the time of installation. or should i use existing Environmental variable to create on new server.
Regards
Kumar

Hi,
I am going to replace Hyperion server.
I know installation, config. backup and migration, but what test should i run for windows 2003 R2 (i mean, should i need anything like IIS for planning)
Secondly i don't think there is any need to do with environmental variable as it should create automatically at the time of fresh installation. or should i take backup of Environmental variable from older server and then import to new server?

Similar Messages

Changing RDBMS Server for Hyperion Essbase

Hello All,
We have installed and configured 11.1.2.2.100(Essbase, EIS, Studio, Shared Services) on Windows 2008 32-bit Server successfully.
Everything went fine and all products are working.
Now we changed the RDBMS Server for Hyperion Essbase and ran the configuration once again with new RDBMS server with "Reuse existing tables" option.
H1
| First Current
DB1 -> DB2
From that time we are unable to access the essbase server.
We were able to see the users in Shared Services. All users able to login to Shared Services, EAS but problem with Essbase.
In HSS_Component table found old server name in two places, we have updated the old DB server name to Current DB server name.
When we try accessing essbase we are getting the below error(tried with hostname, ip address, EssbaseCluster1 as Essbase server)
Network error [10061]: Failed to connect to [Server Name:1423]
Error: 103: Unexpected Essbase error 1030818
Error: 1042006: Network error [10061]: Failed to connect to [[ServerName]:1423]
Error: 1030818: Login failed. Please check if server and port are correct. If you received timeout or handshake failure,
please check if you tried to connect to secure port without secure keyword or clear port with secure keyword.
Please help me to resolve this issue.
Thanks,
Prathap

It is extremely important that you know what you are doing before touching the shared services registry and the correct way is not to update tables, it is to use the epmsys_registry utility.
To be honest you may have screwed up the registry and that is something I am not going to get involved in, try discussing with Oracle what you have just done.
If it is only the rdbms servername changing (not the essbase server) then you should follow the instructions in the documentation - Changing the Shared Services and Registry Database Connection Information and Password
Cheers
John
http://john-goodwin.blogspot.com/

Creating data server for Hyperion Shared Services (HSS)

Hey Gang,
Has anyone had experience in creating a Data Server for Hyperion Shared Services (HSS) using the java API? I know HSS uses Native Directory, but to be compliant the Hyperion folks recommend using the java API strictly to get access to the users, groups, etc.
Anyone have experience with this, or perhaps at least how to get ODI to kick off a java file to pull the data needed? What effort would be needed in ODI, is it straight forward or would I have to develop a technology or something to integrate into ODI?
Thanks.

Thanks for the quick reply John. I am trying to get user and group information, and also doing some complex manipulation. I need this to verify user access and some other stuff. I will not always have access to HSS and cannot always export the information, thus the need to use the HSS java API.
I'm trying to pull it out of HSS and put it into an Oracle table in a standard format where I'll use the information and do reporting off of it. I've developed a java class that does migrates the data over, but its crude and I'd like to move it into ODI with some of our projects that are currently doing the same thing with other ERP such as Ebiz and Peoplesoft.
If I can recode some of the java in ODI, how would I go about doing that. Where would I include the libraries, etc.? is there a tutorial or a place where I can get started on that.
Thanks for all the help.

We want to purchase new server for our server room

We want to purchase a new server for our server room please let me know how to get it directly from HP. we also want a backup server with that.
Please help us to find out the best option
With Best Regards

Greetings,
Welcome to the HP Forum.
Please provide the following information:
Customer / Your Region/Country
Products interest (prod. names)
If you can do that, I can send along the information to HP and seek the correct contacts for you.
Thanks!
Click the Kudos Thumbs-Up to show appreciation and say Thanks.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround to your Question!
Kind Regards,
Dragon-Fur

Multiple Managed Server for Hyperion Planning in 11.1.2.2

Hi All,
I was going through some online documnetation/new features on Hyperion Planning 11.1.2.2 and came to know that from an architecture standpoint we can now have multiple Planning Managed Servers in a cluster thereby making it truly Highly Available.
I have done a standard deployment and can see a cluster for Planning with a single managed server Planning0 in weblogic admin console.
Can any one please provide me insight/documnetation as what steps needs to be done to create multiple planning managed server in 11.1.2.2.
Thanks
Perwez

Thanks John.
I was not looking for something which is scaling out Hyperion Planning(via load balancer)/Horizontal clustering.
But was looking for some thing like Vertical clustering(multiple JVMs/nodes of Hyperion Planning within a single planning server) which was applicable in 11.1.1.3.
Came to know that with 11.1.2.2 vertical clustering not more supported.
Thanks

New Server for 1:1 Deployment?

Could anyone give me some advice on what the best course of action is???
I have a Snow Leopard Server along with a collection of 100+ Bootcamped MBP using Snow Leopard & Win 7. We looking at deploying over 300+ iPad's but I know that at least 1 piece of software is not compatible with Mavericks Server. After watching several clips on YouTube and surfing Google, I like the idea of using Profile Manager and configurator to add to the existing small deployment of iPad's. Other (yearly subscription) MDM's would cost too much. For the size of my new deployment I now want to remotely manage the iPad's as there are not enough hours in the day to indivdually administer all the iPad's and carts I manage. I don't have the time to sit down and take apart my mac server to evaluate which apple & 3rd party admin software packages would still function (and how much it would cost to upgrade them otherwise) correctly with an upgrade to Mavericks server. We can't afford to take down one of our servers just so that I can mess around with it or test out a new server build in one of our busiest times of the year (for some of our users).
Could someone experienced with the new Mavericks server answer some of my concerns:
Would a second new dedicated mac mini server be capable of handling over 300 iPad's or would I be better asking my management for a bigger piece of kit?
Will I still need a mac with configurator to periodically update the iPad's with iOS upgrades, or does Profile Manager do this currently(or plan to in the future)?
Thanks

At the moment Profile Manager does not let you force an upgrade to a specific or latest iOS version. The only way to do this is to connect a device via USB to a Mac running Apple Configurator, you can have multiple devices connected via USB at the same time and do them in bulk.
Yes Profile Manager on a Mac mini can cope with 300+ iPads.

New Server for Preview SAP WAS ABAP and Java

Hi
I wish to purchase a new PC or server to specifically house my ABAP and Java preview installations rather than have them running on an old PC and laptop.
Anyone out there got some recommended configurations? Max spend will be £1500.
Cheers
Ian

Ian,
Personally I wouldn't be happy running a server 24/7 at home but would want to just switch it on and the server start so would be looking to have some sort of script to run the relevant WAS instances automatically on startup.
160Gb hard drives would be ample. Could consider increasing the storage and then the system could double up as a backup device as well as a SAP server.
I've built systems in the past and that's the approach I'd take for this too. I don't mind buying pre-built systems but I
detest all the rubbish software they bundle with them. If you build it yourself you can install just Windows and it'll run like a dream.
This bundle looks interesting:
http://www.overclockers.co.uk/showproduct.php?prodid=BU-039-OK
The motherboard takes four memory modules so the 2Gb would consume two of these allowing for upgrades in the future if deemed necessary. Add in a couple of HD's, a DVD-RW, a cheap gfx card and a case and you'd easily get change from £800. Could spend a bit more to get more silent components too.
Now I've had a look around and priced them up I'm even more tempted!!!
Cheers,
JB

News Server for OS X Server?

Not sure where else to post this: Is there a net newserver that is generally used for serving from OSXS?
I know news has fallen greatly since we used to have to edit our .newsrc files by hand using vi but I just noticed it's not even on the default software list from Apple and a quick site search turned up nothing.
Is News really finally dead?
=Tod
G5/2.0x2, Dual XServes x2, XRAID, beige G3 501Mhz

I had the ISP's tech in today with proper network analysis software to see what's going on.
We discovered that it is not SLP that is causing problems as one tech had suggested. Anytime that the internet access was disconnected from the network, the access to services on the OS X Servers go down or are extremely slow. So we began to look at the DNS entries and realized if we removed DNS then the servers refused access, if DNS entries were made (using OpenDNS), then the servers work.
For example, we use the mail server component of OS X Server 10.4 for our email services. We cannot access the internal server (via IP) without the XServe having an entry in DNS. Put in OpenDNS servers, and things work like they should. The same scenario applies to any services (FTP, NewsEdit, etc.) that's on the OS X Servers. I guess what I'm not understanding is why does everything work internally as long as the OS X Servers have something listed for DNS - even though the DNS is an external DNS IP? Because it is external outside of the network, it's not like the mail server or clients are resolving the private IPs (which there's nothing to resolve since use IP numbers for connection purposes).

ISCSI LUNs presented as online on new server for new cluster.

We are building out a new 2012 R2 Hyper-V cluster. The old environment is a mix of Cluster Shared Volume drives and LUNs presented just for the a VM itself.
I had planned on presenting everything in the old environment to the new environment and then just using the cluster migration wizard to move VM's over a few at a time.
I ran into a problem when I connected my first host to our SAN today. It is in a group that has over 70 LUN's presented to it. Once I connect to the target the host just cripples. I am not having Memory or CPU issues but Disk IO issues.
I noticed that the host now sees all 70 plus LUNs and has tried to bring those disk online as well.
I don't want them online right now. I just need the quorum drive and a few of the newly created LUN's online to finish creating our Cluster so we can start migrations.
Why is the Host trying to bring these drives online? As soon as I click on Devices in the iSCSI initiator the program locks up and doesn't respond.
Is there a way to setup the target but force the OS not to bring any of those disk online? I removed the favorite target, and there are no items listed in the Volume List under Volumes and Devices. However if you go to Disk Manager it shows all
70 plus disk and most of them now show online except for my newly created LUNs which are not initialized yet.
Kristopher Turner | Not the brightest bulb but by far not the dimmest bulb.

Hi KristopherJTurner,
You can try to remove the issue occurred hosts from iSCSI target SAN first. The iSCSI initiator first logs on to the target which the target has grant access before the server
can start reading and writing to all LUNs that are assigned to that target.
More information:
Manage iSCSI Targets
http://technet.microsoft.com/en-us/library/cc726015.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

New Server for SMB using Mirror Drives

I'm setting up anew Windows Server 2012 R2 Server. I have mirrored a pair of 1tb drives and have an additional drives (1 tb, 500 gb and a 100gb SSD) in the box. My purpose in mirroring the primary disks is for resiliency in case I disk fails
the server should be able to continue and be bootable. I mirrored them use the disk manager.
Is this the preferred approach or should I leave them un-mirrored and create a mirrored disk using server manager and create virtual disks that are mirrored? Will this approach protect the hypervisor host ?

Hi,
Do you mean you want to mirror a boot disk with windows storage pool?
According to the blog, you cannot boot from storage space.
http://blogs.msdn.com/b/olivnie/archive/2013/02/05/windows-8-storage.aspx
If you really want to do this, a hardware RAID could be your choice.
Hope this helps.

Move Publisher backup to new server( Cold Standby Server) ?

We have CUCM cluster consist of 1 publisher, 4 subscriber and have installed a new node like another cluster's publisher(with diferent ip address from existing publisher) . When existing publisher goes down we will move publisher backup to new server and change publisher ip address to new server on existing subscribers.
is it posible ?
Our aim is using new server for publisher down issue.(like cold standby server but diferent ip address from existing publisher)
Or is there any better way to install publisher backup on on branch? When publisher goes down we will use the new server like publisher.

Hi
Re: NTP... you can have multiple NTP servers assigned, and only the primary NTP server is used for license MAC generation. As such, I would:
1) set the primary NTP server to be the real NTP address you want to use. This will not be accessible when you build the server with the old servers' IP.
2) set the secondary NTP server to an accessible NTP server. I do this by setting up NTP on the server you serve the SFTP backup file from. I use Meinberg NTP if this is a Windows box, it's free.
That way you can build the server (primary NTP not accessible, but secondary is so it's fine). Then after the restore, change IP address and it will start using the primary NTP server.
I presume deployment type refers to product and role .e.g. a CUCM Publisher, not a CUC server or CUCMBE publisher.
Aaron HarrisonPrincipal Engineer at Logicalis UK
Please rate helpful posts...

Is it possible by using boot camp to set up a high spec mac pro to operate as a pc server for a network of approx 20 pcs

My company has recently bought a high end mac pro to act as a mac server. However it is no longer need but business does need a new server for a network of about 20 pcs. Is it possible or practical using boot camp to tuen the mac into a fully funtioning pc server?
jb

Thanks for the info. I don't have Server 2008 but the Boot Camp documentation says Windows 7 only is supported. Glad you jumped in knowing that Server 2008 is supported.
In the original poster's post he said he wanted a fully functioning server so I assume he wants Server 2008. If he is misusing the term server and only needs a peer network then he can install Windows 7.

BACKUP FROM OLD SERVER & RESTORE TO NEW SERVER

Hi ,
i have install SAP on New Server (ADM X86) , it has good hardware. that why i want to shiftout from old deveopment Server to new Server . From old server i want to take backup through DB13 and restore through Brtools on new server. backup will be on disk.
please guide me which type of backup should be taken ?
and what is difft b/t whole backup and full backup ?
NEW SERVER with 2 Quard core processor, 24 GB RAM
OS= SOLARIS 10
DB= Oracle 10.2.0.4 with 39 Interim opatch
SAP= Ecc 6.0
Hostname=sapdev
System No.=00
OLD Server(SPARK) WITH 1 Dual Core Processor , 6 GB RAM
OS= SOLARIS 10
DB= Oracle 10.2.0.4 with 39 Interim opatch
SAP= Ecc 6.0
Hostname=devsap
System No.=00
Best Regard
Imran Khan

Hi Imran,
In you have a full backup, using this existing backup further you can take incremental backups. The incremental backup is based on the previous full backup. The full and incremental backups is controlled by RMAN (Recovery manager).
You can take a full backup and restore the same in your new server and later take an incremental backup from your old server and restore it to the new server for all the delta changes made. By this you can make sure that your production data is made consistent in the new server.
If you have sufficient dowtime then, you can take a whole DB backup with redo log files and restore them in your new server.
There is no difference between whole backup and full backup, with respect to the database data.
784118 - System Copy Java Tools
check the OraBrcopy tool in this note. It might help you.
regards,
chandru.

Moving Hyperion Intelligence to New Server

Using a document supplied by Hyperion, we are tyring to move ourHyperion Intelligence setup from an old server to a brand newshinny system. However, we're a little confused on the databaseend. We currently have the old server A pointing torepository/database A. The new server B has been installedwith the Intelligence suite using database B. We areusing oracle for our database/tablespace. The document stateswe simply need to "exp" from database A and"imp" into database B. (note: there are other stepsinvolved here but are unrelated to the database.) We're having some problems/questions related to this and wondered if anyone else out there hasattempted to migrate their Intelligence suite from one server toanother. I do have an open ticket with Hyperion but wanted to hear from any other customers that might have done the some thing. Thanks. Luke

Luke, Out of curiosity.....where did you find this document. I contacted support Friday because we are planning on moving Intelligence to a new server as well but they basically told me to login to e-support and look for the document there. I have been unable to locate this online. Can you perhaps enlighten me as to where I may be able to find this? I saw you post and figured I'd ask before calling support back later this morning. Thanks, Bob

Problem with the new server UCS C220 for set IP to CIMC

Hi
We’ve a problem with the new server UCS C220.
We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
Note. The dedicated management NIC does not link, the other two ports do make link.
What do you suggest to put an IP to CIMC and start installing our applications?
regards

You may have noticed that there is no DVD rom on the c220. What you need to do is:
Login into the CIMC from your browser
Luanch the KVM
Insert the VMware DVD in your machines drive
On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
After the VMware OS installs press F2 to enter IP.
Browse to the VMware ip to download the Vsphere client
Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
You can now upload OVA templates or manually create virtua machine from this enviroment.
Hope this help

New server for hyperion

Similar Messages

Maybe you are looking for