New server with same software allows access to private files

I purchased a new mac mini with Snow leopard server software and had the Apple Store transfer data from the old server (also Snow leopard) to the new mini. The server only stores files at this time and acts as a Central File Server. Before the transfer, we had individual file folders on the server which were accessible only by the owner of that folder. Now, however, the folders are all open to anyone who has access to the Central File Server. How can I limit access to each one of the six personal folders on our Central FIle Server?

Check the permissions settings on the folders in Server Admin. My first guess is that the "Others" permissions are set to Read Only or Read and Write.

Similar Messages

Moving DP Content to a New Server With Same Name

We are currently in the middle of a server OS refresh from 2k8 to 2k12 R2. Some of the servers are DPs so I need to move the content from one server to another. The big problem is that the new server must have the same name.
I've read this thread http://social.technet.microsoft.com/Forums/en-US/1ffcaa47-9bf8-476d-965e-28350a6bef1b/move-content-from-old-dp-to-new-dp-at-same-remote-site?forum=configmanagerapps which kind of covers my issue but I presume this person was going to
a server with a new name.
Has anyone done this? Is it possible?
Unless there is something clever the only way I see to do this is to uninstall the DP role from the current server, remove the current server from the domain, add the new server with the same name, re-install the DP role and then re-distribute all the content
to the new server. I'd rather not do this as the DP is on a remote site so all the content will be going over the WAN.
I am running SCCM 2012 SP1 CU3.
Any ideas?

Hi,
>>So can I pre-stage from the old server to the new server or does the pre-staging have to be done from the site server?
Yes, you could prestage content from the old server to the new server. Prestaged content files could be created from Configuration Manager Administrator Console.
>>What is the order of the process?
The following blog could help you to prestage content.
http://blogs.technet.com/b/inside_osd/archive/2011/04/11/configuration-manger-2012-content-prestaging.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Server with same Profile cannot access same networking

Hi,
I have a lab running 1 x Nexus 5010, 2 x FIC 6120'XP's, UCS 5108 and 2 x B200 M2 Blades. I have configured everything per flexpod guidelines (except I have only 1 Nexus). I boot from SAN over Fibre and zoning everything is working 100% My firmware is 2.1(1f)
Question:
Assinged to each blade is 2 vNICs connected to FabricA and FabricB (FabricA = port-channel from FICA to Nexus and FabricB = port-channel from FICB to Nexus - Nexus has 2 different port-channels conf for each link to each FIC)
After I install VMware, I tag vlan 10 (management vlan) for the management traffic of each VMware node. The funny thing is when I ping server 2, iget a response but not from server 1. Both are configured using the same service profile. If I ping server 1 from server 2, I get a response. This leads me to believe that for some reason the traffic is not leaving the FIC from server 1, but it is when using server 2. I have attached screenshots of both servers vifpaths.
Can someone please help urgently as this is driving me crazy as I do not know what the hell is going on.
Cheers

Hello
Hope this solution will help.
Just found my notes on deleting the users profile:
"Deleted Profile logs back in with temporary profile.
This problem occurs if the current user's profile was accidentally deleted from the system.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry
1. Log on to the system by using an administrative user account other than the user account that is experiencing the problem.
2. Back up all data in the current user's profile folder if the profile folder still exists, and then delete the profile folder. By default, the profile resides in the following location:
%SystemDrive%\Users\UserName
3. Click Start, type regedit in the Start Search box, and then press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click Continue.
4.Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
5.Under the ProfileList subkey, delete the subkey that is named SID.bak.
Note SID is a placeholder for the security identifier (SID) of the user account that is experiencing the problem. The SID.bak subkey should contain a ProfileImagePath registry entry that points to the original profile folder of the user account that is experiencing the problem.
6. Exit Registry Editor.
7. Log off the system.
8. Log on to the system again."
& for more information kindly check the below link too :- http://community.spiceworks.com/topic/187995-network-pc-cannot-access-1-specific-server .
Regards
keshav

Moving oracle database to a new server with an upgraded oracle software

Hi Guys,
Here is the scenario, we have an existing Oracle 9.2 demo database on a Solaris 5.9 server. I was asked to transfer this to another server with same OS but with an Oracle 10g software installed. The original plan was to mount the exisiting Oracle home from the original server to the new server and from there copy all the database files and bring up the database.
Here are the steps:
- Issue an "alter database backup controlfile to trace", get the script from the trace file
- Copy all database files to the new server
- Edit parameter files
- Do a startup mount recreate the control files, do a recover database, and startup the database on the new server.
I suggested that we to a transport tablespace but due to limited resources and that the 9.2 database does not have this feature we can't perform this process. I also can't do a exp/imp of the database since we really have limited resources on a disk. I was wondering if the steps I enumerated above are correct? Or would result in an error?

Hi,
why you want to recreate the controlfile, does the mount point locations are changing from old server to new server?
if you recreating controlfile new incarnation starts, keep in mind.
you have the downtime to upgrade.. :)
shutdown
take cold backup and move to new server.
create the directory structure as exist in PFILE including CRD files.
install software
startup upgrade
upgrade database(need to add sysaux TBS)
shut immediate
startup
*@?/rdbms/admin/utlrp.sql*
change hostname in listner.ora/tnsnames.ora files.
Thanks

My iPhone 3Gs is now no longer a recognised device on iTunes after I downloaded the new iTunes with iCloud software, but it does recognise my iPad2??

My iPhone 3Gs is now no longer a recognised device on iTunes after I downloaded the new iTunes with iCloud software, but it does recognise my iPad2??
I run both Mac and a PC and have iTunes on both, which has previously recognised my iPhone. I had updated my Mac with the new iTunes software with iCloud and updated my iPad2 just yesterday. I then wanted to do the same with my iPhone today, but my Mac wouldn't recognise the device so I tried it on my PC, which recognised the phone but told me I needed to update my iTunes and this in turn wanted to update my iPhone software. After completing all this and restarting, my iPhone now shows the iTunes icon with the USB plug pointing towards it, obviously wanting me to plug it in to my computer to re-connect with iTunes, but now neither of my computers recognise my iPhone and my PC states an 'Unknown Device'. My Mac doesn't even see it. Can anyone help as I really need to get my phone working?? Thanks

Hold down the Home and Power button for 20 seconds. And try to update again.
Also read and follow this:
http://www.apple.com/support/iphone/assistant/restore/

SBS2008: Move email from Exchange 2007 to new server with Exchange 2013

We have an old server (SBS2008) and plan to buy a new server with (Server 2012). I need to move all the exchange emails, contacts & calendars to the new server. We will no longer use the old server.
Is there a document or migration tool that will help me understand how to move this data form the old exchange server to the new one?
Old Server:
SBS2008 running Exchange 2007
New Server:
Server 2012
Exchange 2013
Any help is appreciated!

Hi Dave,
It can be done, and as Larry suggested you will consider two Server 2012 installs in order to achieve an environment that looks like your current SBS roles; Exchange 2013 on an Active Directory controller isn't a good long-term solution (SBS did this for
you in the past).
For your size operation, a virtual server host, with a Windows Server 2012 license, and two virtual machines would probably be a suitable design model. In this manner, you have Server 2012 license that permits 1 +2 licenses (one host for virtualization,
up to 2 Virtual Machines on same host).
There's no migration tool. That comes with experience and usually trial and error. You earn the skills in this migration path, and for the average SBS support person you should plan on spending 3x (or more) your efforts estimate in hours planning your migration.
You can find a recommended migration path at this link to give you an idea of the steps, but its not exactly point by point going to cover you off for an sbs2008 to server 2012 w/exchange 2013 migration. But the high points are in here. If it looks
like something you would be comfortable with then you should research more.
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
Specific around integrating Exchange 2013 into an Exchange 2007 environment, guidance for that can be found here:
http://technet.microsoft.com/en-us/library/jj898582(v=exchg.150).aspx
If that looks like something beyond your comfort level, then you might consider building a new 2012 server with Exchange 2013 environment out as new, manually export your exchange 2007 mailbox contents (to PST) and then import them into the new mail server,
and migrate your workstations out of old domain into new domain. Whether this is more or less work at your workstation count is dependent upon a lot of variables.
If you have more questions about the process, update the thread and we'll try to assist.
Hopefully this info answered your original question.
Cheers,
-Jason
Jason Miller B.Comm (Hons), MCSA, MCITP, Microsoft MVP

Integrating WebSphere Portal Server with Sun Java System Access Manager

Hi All,
Is it possible to Integrate WebSphere Portal Server with Sun java System Access Manager?. If so plz send me any doc or web site link for the same.
Thanks in Advance
Rgds,
Lessly J

Rushi-Reliance wrote:
Kindly let us know how to proceed further as we are waiiting some reply from your team.As I already advised in your previous posting (http://forums.sun.com/thread.jspa?threadID=5359095), you are best off re-installing solaris from scratch and installing Communication Suite 6 update 1 if you cannot get Access Manager 7.1 configured.
Regards
Shane.

Migrating Non ASM, Non RMAN to New Server with ASM and RMAN - Possible?

We currently have a database ( Oracle 10g R1 ) on a Sun Solaris server that is NOT using ASM or RMAN. The database is about 300GB. We are getting a new server and we want to install Oracle 10g R2 with ASM and RMAN and migrate the database.
I have seen the documentation on migrating non ASM to an ASM server but the methods all use RMAN. Is it possible to migrate to an ASM database without using RMAN? Would datapump import/export work if I created a new database on the new server with all the same tablespaces? Or, do I have to bite the bullet, install RMAN on the old server and do the backup?
Thanks.

If you're not using RMAN that doesn't mean you can't use it to perform a single backup, rman is contained in every oracle RDBMS installation version 10G or higher.
this is only a sample of how to do it
RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '<file_system_path>/%U.DBF';
--first we allocate the channel default channel.
RMAN>RUN
ALLOCATE CHANNEL DEFAULTCHANNEL TYPE DISK;
SHUTDOWN IMMEDIATE;
STARTUP MOUNT;
BACKUP DATABASE;
SHUTDOWN
}then once you have it, you can do what you want.
It should also be possible to manually restore the database from the original datafiles but it's better to follow the solution involving RMAN.
Bye Alessandro

Add New Server with Configtool Questions

Hello All,
We are running EP7 SP12 on W2K3 with 16GB RAM and 4 CPUs.
As part of one the Go Live checks done to the system a while back, it was recommended that we increase the number of Server processes to the instance.
So, I followed the information here (http://help.sap.com/saphelp_nw70/helpdata/en/68/dcde416fb3c417e10000000a155106/frameset.htm) to add 3 additional servers to the instance. When I restarted the J2EE engine, it basically sat there in a 'Starting Apps' status. I waited about 2 hours before I stopped the startup process. I went back into Configtool and did a 'Remove Server' on the last, Server3, process and restarted J2EE. This time, everything did start OK, but now I have a few questions I hope someone can answer.
1. Is there a limit to the number of Server processes that can exist in a single instance? If not, what would cause the J2EE servers to essentially hang on startup although they didn't look hung, just extremely slow starting up.
2. I thought when you did the initial 'Add Server' it was supposed to create a duplicate Server process. But, when I check the directory structures of the newly created Server processes, they aren't anywhere close to being the same as the original Server0 process. For example, we have a custom redirect in place when people logon to the Portal, but this wasn't transferred/copied to the new Server1 or Server2. The same was true for other customizations. Also, when looking at the structure, Server0 has approx 80,000 files and 15,000 sub-folders. When looking at the new Server1 & Server2, they are both different in size in both files and folders in respect to each other and compared to Server0. Shouldn't they all be the same?
3. A follow up to question 2. If they aren't the same and they are supposed to be the same, can we just copy the missing files & folders from Server0 to the new Servers?
4. Lastly, since I did a 'Remove Server' in Configtool for Server3, it does not appear in the MMC when the J2EE engine starts. This I expect. But, it did not remove the directory structure for Server3. If I try to manually delete the Server3 directory, it simply says it is in use and won't let me delete the structure. So, is it safe to delete this structure since it isn't being used anymore? If so, I'll stop SAP and delete the structure offline. Do I have to do any database cleanup once I do this? If so, can someone point me to some documentation as to what needs to cleaned up in the DB and how?
Thanks,
Tom

Thanks for the info.
Interesting though. I open a message with SAP and posed these same questions. Their response was similar to yours, but it opened up a whole new set of questions. What follows is the text of that message for others to benefit from (clipped for clarity):
SAP's response to the original set of questions posted here:
=====================
....1.Number of server nodes depends upon the CPU speed.J2EE Engine
can support upto 21 server nodes in a intance.
If number of server nodes is big,it will slow down the startup process.
2.When you create the "New Server"its not the dublicate server.
Its a new server.You can not copy mising files from one server to other
J2EE engine syncronises the server nodes in the instance.
3.Yes.You need to manually delete the file system.Configtool deletes
the server node from the DB....
=====================
To which I replied:
=====================
.....2. I thought when you did the initial 'Add Server' it was supposed to
create a duplicate Server process. But, when I check the directory
structures of the newly created Server processes, they aren't anywhere
close to being the same as the original Server0 process. For example,
we have a custom redirect in place when people logon to the Portal, but
this wasn't transferred/copied to the new Server1 or Server2. The same
was true for other customizations. Also, when looking at the structure,
Server0 has approx 80,000 files and 15,000 sub-folders. When looking at
the new Server1 & Server2, they are both different in size in both
files and folders in respect to each other and compared to Server0.
Shouldn't they all be the same?"
You replied:
"2.When you create the "New Server"its not the dublicate server.
Its a new server.You can not copy mising files from one server to other
J2EE engine syncronises the server nodes in the instance."
But, from actual experience, it does NOT synchronize the nodes, rather
it is a partial synchronization.
So, are the following staements true:
-When a new server process is added, ONLY standard SAP delivered files
& folders are synchronized. True or False?
-No custom files/folders are synnchronized. True or False?
-Custom values, whether part of standard SAP deliverables or custom
deliverables, are NOT synchronized. True or False?
-Each server node needs to be configured independently. True or False?
The reason I'm asking such specific questions is because of what we are
seeing. I'll use the same example from before. We modified the
index.html file for the Portal in Server0. When we added the new
server nodes, this index.html file was not synchronized. Instead, the
default index.html file was created for the new server nodes. That is
an example at the file level. Here is an example from a configuration
perspective. In Server0, in the Visual Admin tool, we have a TREX
server specified in TREX service properties. When the new server nodes
were created, this setting was NOT transferred. Therefore, TREX didn't
work until I specifically went back into VA and added the TREX settings
to the new server nodes. This is a major problem and opens up three
more questions:
1.How do we know what settings were transferred vs. those that weren't
transferred?
2.Also, if you can't copy missing files/folders from one server to
another, then how are we supposed to get those files/folders into the
new server(s)?
3. Is there a way to do a comparison between the server nodes to see
what settings are missing?.....
=====================
SAP's reply:
=====================
.....-When a new server process is added, ONLY standard SAP delivered files
& folders are synchronized. True or False? TRUE
-No custom files/folders are synnchronized. True or False? TRUE
-Custom values, whether part of standard SAP deliverables or custom
deliverables, are NOT synchronized. True or False? TRUE
-Each server node needs to be configured independently. True or False?
YES.
If any new server node is added,J2EE Engine syncronises the information
at the time of next restart......
======================
My Reply:
======================
.....1.How do we know what settings were transferred vs. those that weren't
transferred?
2.Also, if you can't copy missing files/folders from one server to
another, then how are we supposed to get those files/folders into the
new server(s)?
3. Is there a way to do a comparison between the server nodes to see
what settings are missing?.....
======================
SAP's Reply:
======================
.....1.How do we know what settings were transferred vs. those that weren't
transferred?
NO there is no way.
2.Also, if you can't copy missing files/folders from one server to
another, then how are we supposed to get those files/folders into the
new server(s)?
You need to deploy the appliactions again on the new server.
3. Is there a way to do a comparison between the server nodes to see
what settings are missing?
No there is no way......
======================
So, although I really didn't have the answers I was looking for, I confirmed the message. It seems ludicrous to me that there is no way of doing a comparison or manual synch between two server nodes. Also, I can't believe you have to configure each node independently let alone when you do a deployment you now have to deploy to each server individually, of which I haven't found any docs explaining how to do that. So if someone here has a suggestion I'd appreciate it. Although at this point, given the fact the server nodes are so out of synch as to make them almost unusable, we might just delete them all and go back to one node, although I don't want to have to do that.
Thanks,
Tom

Does Transfer EBS to new server with New specifications (Ram,Pross ,..)

Does Transfer EBS with same release to new server with New specifications (Ram,pressoser ,..) need new licences ?

Micel 811 wrote:
Does Transfer EBS with same release to new server with New specifications (Ram,pressoser ,..) need new licences ?\does your license is CPU based?
if its user based then No need
please contact oracle sales as they are the best to answer your question .
http://www.oracle.com/us/corporate/pricing/applications-price-list-070574.pdf
;) AppsMasti ;)
Sharing is Caring

HT5622 I was making new Apple ID with my other Email on iTunes, but I canceled the process on payment page. After a while i went to make a new ID with same Email but it says the Email is already in use! what should i do?

I was making new Apple ID with my other Email on iTunes, but I canceled the process on payment page. After a while I went to make a new ID with same Email but it says the Email is already in use! what should i do?

You will need to try changing the email address on the first account and see if you can then re-use it on a new account - you can try changing the email address via http://appleid.apple.com or by logging into it via the Store > View Account menu option on a computer's iTunes (if you don't have a spare email account then you can create one via http://gmail.com or http://hotmail.com)

Replace KMS server with same-named server

I need to replace my KMS server (win2008r2) with a new server (win2012r2), but with the original server’s name.
This is my plan:
 Shutdown the current KMS server and remove it from AD, WINS & DNS
 Rename the new server with the old server’s name
 I have already added the VAMT role to the win2k12 server, but not configured it
Install our KMS VL & run the office 2013 volume license pack on the new server
Does anyone see any problems with this plan?
Do I need to uninstall the KMS key from the original server first?
What kinds of issues will the users see before the 25 client activations happen?
Thanks!

This is fine.
KMS is resolved via a DNS Service record: _vlmcs._tcp.<domainname>
Whenever you are finished installing KMS on the new server, ensure the SRV record is correct.
NOTE: Remember the new KMS server will not start to activate clients until the thresholds are met. (5 servers or 25 clients)
- Chris Ream -
**Remember, if you find a post that is helpful, or is the answer, please mark it appropriately.**

IDCS3 - Paste image into new frame with same cropping offsets?

Anyone know if there's a better way do to this? It used to work in CS2, and (I know this comment won't be popular, but since half the studio I'm trying to convert brings up this point, I'll pass it along <G>), it's always worked in Quark. <G> http://indesignsecrets.com/paste-image-into-new-frame-with-same-cropping-offsets.php Be nice to get this to work without having to jump through hoops. (And please, please don't tell me I need to update to CS4 to get this basic functionality BACK). k.

Thanks, Rob. Unfortunately, I got a new error with the latest script you posted (sorry--not trying to be a pest!!). It says,
Apple Script Error!
Error Number: -2753
Error String: The variable myRend is not defined.
(One thing that's different is I'm working on a different machine than I was the first day I posted about this, but I'm using the exact same version of InDesign. Would this make a difference? I forgot to copy the original script file from the other computer before coming to work today... If I need to do that, I can.)
Thanks for your continued help!

Find serial-number of PSP El.12 on new computer with incl. software

I bought a new computer with the Software Photoshop element 12 included. Now I want to register the software with my Adobe ID but I have no serial Nummer.How can I find the serial-Number on my computer? Thank you

The serial number is not visible anywhere in PSE, at least not the whole number. You need to contact whoever loaded PSE onto the computer, if you didn't also get a disc, in which case the number is usually on the paper sleeve.

I got a new computer, and now i cannot access the local files for my website (Dreamweaver)...help?

I got a new computer, and now i cannot access the local files for my website (Dreamweaver)...
the new computer is a Mac.
I see the site on my computer files, but it will not connect with Dreamweaver on this new computer.
can anyone help with this?
thanks,
Margaret

no special characters...
see if this gives you any info...

New server with same software allows access to private files

Similar Messages

Maybe you are looking for