New Session opens automatically while executing the transactions

When ever we run a new transaction after logging in a
new session opens  automatically.
We dont give any " /o" before the transaction yet ths happens........
can any one get the reason for this????????

hi,
In the initial screen of the transaction check
the start transaction,if the settings for it may be given as /o.just right
click and see in it.
if it is fine there then try to find out in debbuging,
in initial screen give  /h and enter soe tcode.it will give u the reason y it is getting new session trigeered.may be if any exit.. or something is there.
hope this helps.

Similar Messages

  • Error while executing the transaction QC22 (Quality Certificate for Batch)

    Hello Friends,
    While executing the transaction QC22(Quality Certificate for Batch), after giving the Batch Number and Customer Number, when i am executing it , system is throwing the error message as "Not all data was found for characteristic 90139982 in profile D80D8".
    Message no. ZQ010
    Diagnosis
    Not all data was found for characteristic 90139982, referenced as number 0030 in certificate profile D80D8. The missing data could be the short text, specifications, or results.
    System Response
    The missing charactertistic will not be printed on the certificate,
    Procedure
    Review the settings for data orgin of the short text, specifications, and results, and adjust accordingly.
    One more thing i would like to add here as against the same batch in april we had taken the print of COA (Quality Certificate) through the transaction QC22. But now we are trying to do that than system is thrown above mentioned error.
    As i am new in QM, kindly explain we were to maintain the certificate profile.
    Waiting for the experts inputs.
    Thanks and Regards,
    Jitendra Chauhan

    Hi
    Try with QA33 you may have display authorization,  or check in MB51 on the base of material and batch you can find the lot number generated, then go to QA03 and check the result, if you want to validate the characters check with the inspection plan, the characters entered in the inspection plan and the characters in the concerned certificate profile.
    Regards
    Naveen.
    Edited by: vaddapalli naveen on Jul 1, 2010 1:57 PM

  • Problem while executing the transaction code FMBV (Reconstruct)

    We are facing a problem while executing the transaction code FMBV
    (Reconstruct Availability Control in Funds Management) in it when we
    execute this transaction system only updates the expenditure which is
    made before technical upgrade from 4.6c to ECC6 EHP6, against the
    Assigned Budget (KBFC budget type) in the Annual Budget Table (BPJA)
    and
    the expenditure which we made after the upgrade, the program just
    ignore
    it. We can also see the expenditure in the standard FBL3N report.
    Please guide us.
    Thanks and Best Regards,

    Dear Abrar
    In your description, you refer to missing update after an upgrade. First of all, see if table FMIT is consistent, as it is the basis for calculating the assigned values during AVC reconstruction.
    Refer to this note:
    977016 FMIT: Missing totals records in Funds Management  And perform following steps:
    1.- Run program RGZZGLUX
    2.- Run program RFFMRC04 to match totals table with line items. A test run after a successful effective run should not find inconsistencies.
    3.- If RFFMRC04 does not show more inconsistencies, run FMBV as final step.
    Note that this reconstruction must be done without any other budgeting/posting activities at the same time, otherwise you may cause  other inconsistencies.
    Please let me know the results.
    Best regards,
    977016 - FMIT: Missing totals records in Funds Management
    Symptom
    After the upgrade to ERP 2004 or higher you realize that the FMIT totals table is no longer updated in Funds Management. You start the RFFMRC04 report to reconstruct the totals, but the report still displays the missing totals after an update run.
    Other Terms
    FMIT, EA-PS, ECC 5.00, ECC 6.00, ECC 7.00
    Reason and Prerequisites
    This problem occurs due to a generation error.
    Solution
    Start the RGZZGLUX report to generate missing source code in FI-SL. Then start the RFFMRC04 report to reconstruct the totals, now another run of the report should no longer display any errors.

  • Set Payment Method automatically whe execute the transaction MIRO

    Hi,
    When entering an invoice through MIRO transaction we want the system to automatically fulfill the payment method.
    Logic would be the following: Verify if the imputation of any of the position to be posted is equal to u2018Fu2019. If so, system should save, in the vendor position, in the accounting document, the payment method u2018Cu2019.
    I tried using a field exit but it doesnu2019t work. I also tried using a substitution, but in this case, system saves the payment method in the second position of the accounting document, not in the vendor position.
    What I need is that, at the moment of making the payment (F110 transaction), the invoice has the correct payment method.
    Clients have more than one payment method, which is associated to the bank that the payment is going to be made through.
    Thank you very much.

    Uasually vendor master data will be having the default payment methods. Does a single vendor has multiple payment methods? And basing on the logic you are telling the system should pick up the default method for payment?
    sarma

  • Error while executing the rule session

    Hi, I am using Oracle Business Rules Engine 10.1.3.3.0.I am developing rules using XML Facts.I am using a complex type array schema and binding it to define XML facts.Earlier the depth of the schema is 1 and it worked fine,now our schema's depth is 2 and while binding this schema is also working fine.The sample structure of the present schema I am binding is
    <xsd:schema>
    <xsd:element name = 'ruleRepository' type = 'RuleRepositoryType'/>
    <xsd:complexType name='RuleRepositoryType'>
    <xsd:sequence>
    <xsd:element ='ruleFacts' type='RuleFactsType' minOccurs='0' maxOccurs='unbounded'/>
    </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name='RuleFactsType'>
    <xsd:sequence>
    <xsd:element name='fact1' type='xsd:string'/>
    <xsd:element name='fact2' type='xsd:string'/>
    <xsd:element name='fact3' type='xsd:string'/>
    <xsd:element name='fact4' type='Fact4' minOccurs='0' maxOccurs='unbounded'/>
    <xsd:sequence/>
    </xsd:complexType>
    <xsd:complexType name='Fact4'>
    <xsd:sequence>
    <xsd:element name='element1' type='xsd:string'/>
    <xsd:element name='element2' type='xsd:string'/>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:schema>
    Earlier I have binded the similar schema as above but without 'fact4'.It went well and the rules were executing fine.
    However when I am trying to bind a similar schema like the above one, its binding fine but when executing from the BPEL Process,its giving errors like,
    "Error Caching Decision Services metadata,fact3 is undefined in DM,line6,Column 12",
    Please note that I am using fact1 and fact2 only for defining the rules , I am niether using fact3 which is a simple type nor fact4 which is a complex type.
    I have asserted Package.RuleRepositoryType in the definitions of the rule author.I have tried with different combinations of assertions but no one worked.
    The above error(
    "Error Caching Decision Services metadata,fact3 is undefined in DM,line6,Column 12") is coming for the first run of the decision service only,in the next runs its giving another error,which is like
    <2008-04-10 07:52:30,772> <ERROR> <default.collaxa.cube.services> <::> ORABPEL-36333
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::>
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> Error while executing the rule session.
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> The rule session {0} failed to execute.
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::>
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.execute(OracleRuleSession.java:251)
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:1385)
    <2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.impl.DecisionServiceImpl.assertExecuteWatchStateless(DecisionServiceImpl.java:546)
    <2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.invoke_assertExecuteWatchStateless(BookOrderDecisionSOAPBinding_Tie.java:162)
    <2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.processingHook(BookOrderDecisionSOAPBinding_Tie.java:457)
    <2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:297)
    <2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:413)
    <2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
    <2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:277)
    <2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
    <2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:134)
    <2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
    <2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
    <2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    <2008-04-10 07:52:30,801> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at java.lang.Thread.run(Thread.java:595)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> Caused by: java.lang.NullPointerException
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.rpi.oracle.RuleSessionPool.getSession(RuleSessionPool.java:463)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.execute(OracleRuleSession.java:224)
    <2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> ... 26 more
    <2008-04-10 07:52:30,803> <ERROR> <oracle.bpel.services> <::>
    java.lang.NullPointerException
    at oracle.bpel.services.rules.rpi.oracle.RuleSessionPool.getSession(RuleSessionPool.java:463)
    at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.execute(OracleRuleSession.java:224)
    at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:1385)
    at oracle.bpel.services.rules.impl.DecisionServiceImpl.assertExecuteWatchStateless(DecisionServiceImpl.java:546)
    at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.invoke_assertExecuteWatchStateless(BookOrderDecisionSOAPBinding_Tie.java:162)
    at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.processingHook(BookOrderDecisionSOAPBinding_Tie.java:457)
    at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:297)
    at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:413)
    at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
    at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:277)
    at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
    at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:134)
    at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
    at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
    at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    08/04/10 07:52:30 pFaultMessage is org.collaxa.thirdparty.apache.wsif.base.WSIFDefaultMessage@6e0e5f name:operationErroredFault
    08/04/10 07:52:30 QName string is operationErroredFault
    where 'BookOrderDecision' is the name of the decision service I am using in BPEL.
    I dont understand why I am getting two errors for the same BPEL Process.
    Kindly help me in this problem.I am stuck with this for about a week but could not get to the solution.
    Thanks in advance.
    Regards,
    Venkat.

    Hi Venkat,
    Whenever you do schema changes, you need to go through the cycle of
    re-importing the XML schema in the rule repository, re-create the decision
    service partnerlink, re-deploy the decision service.
    I suspect you have maybe imported the entire XML fact type model (with fact3 and
    fact4) instead of just fact1 and fact2 (might want to check in rule author).
    So even if you don't use fact3 and fact4 in decision service, they are part of the rules
    datamodel.
    Regards,
    Ralf

  • Error while executing the payroll through transaction code PC00_M40_CALC

    Dear Sir/ Madam,
    While executing the payroll through the transaction code PC00_M40_CALC , i am getting the error as mentioned below :
    "Division by zero not performed "
    Calculation rule X0133****5            RTE = ISDIVP DIVID ARR ZERO=A   ADD
    I am not able to resolve this error. So request to guide me on this.
    Thanks & regards,
    vijaya.s.c.
    Moderator message: wrong forum, please have a look in the (I guess) ERP HCM forums.
    Edited by: Thomas Zloch on Jan 24, 2012

    Hi,
    Maintain have you changed any x013 rule?
    If not, just maintain attendance/time events then process the payroll.

  • Error while executing the CKMLCP (Actual Costing) Transaction

    Hi Expert,
    I am getting the following Error while executing the CKMLCP (Actual Costing) Transaction through my User ID in system. If we execute the same transaction  with other user id then there is no Error. same role is assign to both user. Try to check SU53 screen shot but it show no error
    See the below error for referance:-
    Internal error in program SAPLCKML_RUN_COCKPIT_ACT
    Message no. CKMLRUN004
    Diagnosis
    An unexpected situation has appeared in program SAPLCKML_RUN_COCKPIT_ACT.
    The problem has to do with a program error - the indirect result of a program error or an inconsistency in Customizing.
    System Response
    Processing had to be terminated.
    Procedure
    Inform your system administrator
    Thanks
    Dinesh

    Hi Shyam,
    Thanks Shyam,
    I check this note this is not applicable for my system, In mention note Correction delivered in Support Package 600.
    but support Package in my system SAP_APPL 603 SAPKH60303,
    Is there any other note or solution for 603 SP
    Thanks
    Dinesh

  • Error while executing the proxy service

    Hi,
    I have a procedure which uses a database link to access my tables. And business service will invoke this procedure through JCA.
    We have created a datasource (Driver : non - XA for Service connections). However, while executing the proxy service it gives me below error.
    Do i need to change the type of driver. Can anybody please help me on this.
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
    <soapenv:Header xmlns:com1="com:gm:vehicleengineering:engineeringworkorder:ewostatus:types:ewostatusschema:1:0" xmlns:com="com:gm:common:utilities:types:servicecontrol:1:0">
    <com:ServiceControl>
    <com:Service>EWOStatus</com:Service>
    <com:Version>1.0</com:Version>
    <com:ConsumerID>CID</com:ConsumerID>
    <com:MessageID>MID</com:MessageID>
    <com:SentTimeStamp>2008-09-28T21:49:45</com:SentTimeStamp>
    </com:ServiceControl>
    </soapenv:Header>
    <soapenv:Body>
    <soapenv:Body>
    <com:ServiceFault xmlns:com="com:gm:common:utilities:types:servicefault:1:0">
    <com:FaultCode>SOAFLT-999</com:FaultCode>
    <com:FaultString>GeneralError</com:FaultString>
    <com:FaultActor>Server</com:FaultActor>
    <com:FaultDetail>Invoke JCA outbound service failed with connection error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/VehicleEngineering/EngineeringWorkOrder/EWOStatus/V1/WSDL/jcaEWOStatus_1_0_0 [ GetEWOStatus_ptt::GetEWOStatus(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'GetEWOStatus' failed due to: Interaction processing error.
    Error while processing the execution of the SP_GETEWOSTATUS API interaction.
    An error occurred while processing the interaction for invoking the SP_GETEWOSTATUS API. Cause: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.DatabaseException
    Internal Exception: java.sql.SQLException: Internal error: Cannot obtain XAConnection java.lang.ClassCastException: oracle.jdbc.driver.T4CConnection
         at weblogic.jdbc.jta.DataSource.getXAConnectionFromPool(DataSource.java:1684)
         at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:439)
         at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396)
         at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:355)
         at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:126)
         at org.eclipse.persistence.sessions.JNDIConnector.connect(JNDIConnector.java:94)
         at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162)
         at org.eclipse.persistence.internal.databaseaccess.DatasourceAccessor.connectInternal(DatasourceAccessor.java:327)
         at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.connectInternal(DatabaseAccessor.java:295)
         at org.eclipse.persistence.internal.databaseaccess.DatasourceAccessor.reconnect(DatasourceAccessor.java:558)
         at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.reconnect(DatabaseAccessor.java:1437)
         at org.eclipse.persistence.internal.databaseaccess.DatasourceAccessor.incrementCallCount(DatasourceAccessor.java:303)
         at oracle.tip.adapter.db.DBConnection.getTopLinkSQLConnection(DBConnection.java:335)
         at oracle.tip.adapter.db.transaction.DBTransaction.beginInternal(DBTransaction.java:126)
         at oracle.tip.adapter.db.sp.SPInteraction.executeStoredProcedure(SPInteraction.java:93)
         at oracle.tip.adapter.db.DBInteraction.execute(DBInteraction.java:248)
         at oracle.tip.adapter.sa.impl.fw.wsif.jca.WSIFOperation_JCA.performOperation(WSIFOperation_JCA.java:534)
         at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.request(JCABindingReferenceImpl.java:257)
         at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:150)
         at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
         at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
         at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:572)
         at sun.reflect.GeneratedMethodAccessor771.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
         at $Proxy142.sendMessageAsync(Unknown Source)
         at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:152)
         at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
         at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:560)
         at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
         at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatch(PipelineContextImpl.java:501)
         at stages.routing.runtime.RouteRuntimeStep.processMessage(RouteRuntimeStep.java:128)
         at com.bea.wli.sb.stages.StageMetadataImpl$WrapperRuntimeStep.processMessage(StageMetadataImpl.java:346)
         at com.bea.wli.sb.pipeline.RouteNode.doRequest(RouteNode.java:106)
         at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
         at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:922)
         at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:214)
         at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:99)
         at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:591)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
         at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
         at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:590)
         at com.bea.wli.sb.transports.TransportManagerImpl.receiveMessage(TransportManagerImpl.java:375)
         at com.bea.wli.sb.transports.CoLocatedMessageContext$1.run(CoLocatedMessageContext.java:164)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
         at weblogic.security.Security.runAs(Security.java:61)
         at com.bea.wli.sb.util.security.SecurityUtils.runAs(SecurityUtils.java:58)
         at com.bea.wli.sb.transports.CoLocatedMessageContext.send(CoLocatedMessageContext.java:157)
         at com.bea.wli.sb.transports.http.wls.HttpTransportProvider.sendMessageAsync(HttpTransportProvider.java:215)
         at sun.reflect.GeneratedMethodAccessor771.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
         at $Proxy122.sendMessageAsync(Unknown Source)
         at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:152)
         at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
         at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:560)
         at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
         at com.bea.wli.sb.pipeline.PipelineContextImpl.dispatch(PipelineContextImpl.java:501)
         at stages.routing.runtime.RouteRuntimeStep.processMessage(RouteRuntimeStep.java:128)
         at com.bea.wli.sb.stages.StageMetadataImpl$WrapperRuntimeStep.processMessage(StageMetadataImpl.java:346)
         at com.bea.wli.sb.pipeline.RouteNode.doRequest(RouteNode.java:106)
         at com.bea.wli.sb.pipeline.Node.processMessage(Node.java:67)
         at com.bea.wli.sb.pipeline.PipelineContextImpl.execute(PipelineContextImpl.java:922)
         at com.bea.wli.sb.pipeline.Router.processMessage(Router.java:214)
         at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:99)
         at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:591)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
         at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
         at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:590)
         at com.bea.wli.sb.transports.TransportManagerImpl.receiveMessage(TransportManagerImpl.java:375)
         at com.bea.wli.sb.transports.http.generic.RequestHelperBase$1.run(RequestHelperBase.java:152)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
         at com.bea.wli.sb.transports.http.generic.RequestHelperBase.securedInvoke(RequestHelperBase.java:151)
         at com.bea.wli.sb.transports.http.wls.HttpTransportServlet.service(HttpTransportServlet.java:127)
         at weblogic.servlet.FutureResponseServlet.service(FutureResponseServlet.java:25)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3686)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Thanks,
    Chandana

    Make sure that you are using non-xa datasources and in DBAdapter outbound connection pool configuration provide the data source JNDI in "dataSourceName" property instead of "xADataSourceName" property. Update the DBAdapter after changing configuration.
    Regards,
    Anuj

  • Runtime Error While executing the WebDynpro Application

    I am getting the Runtime Error While executing the WebDynpro Application. The error message is "TSV_TNEW_OCCURS_NO_ROLL_MEMORY".
    It says like "
    Short text
        No roll storage space of length 9728 available for OCCURS area.
    What happened?
        Each transaction requires some main memory space to process
        application data. If the operating system cannot provide any more
        space, the transaction is terminated.
    But while executing some other Web Dynpro Applications, i am not facing this problem.

    Generally this error is a result of an infinite loop on internal table or select endselect statement where by severs  temporary memory gets full. With no memory to insert new records in temporary memory system generates the dump.
    Check your application or ask basis consultant to look at the memory parameters in instance profile.
    Regards
    Rohit Chowdhary

  • Error while executing the Job for Objects :null  Batch Risk Analysis

    Hi All,
    We've recently upgraded Virsa to version  5.3_14 .  I'm encountering a problem when executing the Batch Risk Analysis job for users, roles and profiles.  The job does not complete for some objects and it seems to be sporadic and shows this error: -
    Background Job History: job id=395, status=2, message=Error while executing the Job for Object(s) :ABROWN:null                                                                               
    I've attached the log for your review.
    Thanks in advance for your help.                                                                               
    Linda Lewis                                                                               
    Feb 9, 2011 1:47:53 PM com.virsa.cc.xsys.meng.ObjAuthMatcher <init>
    FINEST: ObjAuthMatcher constructed: 4ms, #singles=2141, #ranges=0, #super=0
    Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis
    WARNING:  Job ID:395 : Failed to run Risk Analysis
    java.lang.StringIndexOutOfBoundsException at java.lang.String.substring(String.java:1019)
    at com.virsa.cc.xsys.util.RuleLoader.getPermRule(RuleLoader.java:573)
    at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1609)
    at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:321)
    at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchRiskAnalysis(BatchRiskAnalysis.java:1166)
    at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1464)
    at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:560)
    at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:363)
    at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:375)
    at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:92)
    at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:444)
    at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1236)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
    at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(AccessController.java:207)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
    FINEST: Lock:1004
    Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock unlock
    FINEST: Unlock:1004
    Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
    WARNING: Error: while executing BatchRiskAnalysis for JobId=395 and object(s):ABROWN: Skipping error to continue with next object: null Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
    FINEST: --- @@@@@@@@@@@ Updating the Job History -
    2@@Msg is Error while executing the Job for Object(s) :ABROWN:null
    Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
    INFO: -
    Background Job History: job id=395, status=2, message=Error while executing the Job for Object(s) :ABROWN:null
    Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
    FINEST: Lock:1004
    Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock unlock
    FINEST: Unlock:1004
    Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
    INFO: --- BKG User Permission Analysis (System: P20:020) completed ---  elapsed time: 4522 ms
    Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
    Edited by: Linda Lewis on Feb 9, 2011 9:08 PM

    Hi,
    Was a solution found for this error?
    Thanks,
    Glen

  • An unknown error occurred while executing the PowerShell script:

    Hello all,
    Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
    Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
    When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
    to exit and go back into VMM in order to get anything else to run.
    The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
    An unknown error occurred while executing the PowerShell script:
    The connection to the VMM management server scvmm2.mmmmmm.com was lost.
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Try the operation again. If the issue persists, contact Microsoft Help and Support.
    ID: 27235
    This is what I get in Events
    Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
    Log Name:      Microsoft-Windows-PowerShell/Operational
    Source:        Microsoft-Windows-PowerShell
    Date:          4/9/2015 3:27:04 PM
    Event ID:      4100
    Task Category: Executing Pipeline
    Level:         Warning
    Keywords:      None
    User:          mmmmmm\paufra
    Computer:      tools-francis.mmmmmm.com
    Description:
    Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
    Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
    service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Context:
            Severity = Warning
            Host Name = Default Host
            Host Version = 4.0
            Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
            Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
            Engine Version = 4.0
            Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
            Pipeline ID = 16
            Command Name = Get-SCReplicationGroup
            Command Type = Cmdlet
            Script Name =
            Command Path =
            Sequence Number = 91
            User = mmmmmm\paufra
            Shell ID = Microsoft.PowerShell
    User Data:
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
        <EventID>4100</EventID>
        <Version>1</Version>
        <Level>3</Level>
        <Task>106</Task>
        <Opcode>19</Opcode>
        <Keywords>0x0</Keywords>
        <TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
        <EventRecordID>285</EventRecordID>
        <Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
        <Execution ProcessID="2344" ThreadID="4076" />
        <Channel>Microsoft-Windows-PowerShell/Operational</Channel>
        <Computer>tools-francis.mmmmmm.com</Computer>
        <Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
      </System>
      <EventData>
        <Data Name="ContextInfo">        Severity = Warning
            Host Name = Default Host
            Host Version = 4.0
            Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
            Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
            Engine Version = 4.0
            Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
            Pipeline ID = 16
            Command Name = Get-SCReplicationGroup
            Command Type = Cmdlet
            Script Name =
            Command Path =
            Sequence Number = 91
            User = mmmmmm\paufra
            Shell ID = Microsoft.PowerShell
    </Data>
        <Data Name="UserData">
        </Data>
        <Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
    Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
    service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    </Data>
      </EventData>
    </Event>

    Hi Sir,
    First , please try to run the VMM configuration analyzer on that computer :
    http://www.microsoft.com/en-us/download/details.aspx?id=41555
    In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
    http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Gettng Error while executing the procedure(oracle 10.2.0.3.0)

    Hi all,
    I am getting following error While executing the package .
        PLS-00103: Encountered the symbol "Truncate" when expecting one of
             the following:
             * & = - + ; < / > at in is mod remainder not rem return
             returning <an exponent (**)> <> or != or ~= >= <= <> and or
             like LIKE2_ LIKE4_ LIKEC_ between into using || multiset bulk
             member SUBMULTISET_I have written follwing query in the package body.
    EXECUTE IMMEDIATE 'TRUNCATE TABLE FORT ';
    EXECUTE IMMEDIATE '
         INSERT INTO FORT (CID,CODE,DESC,SCODE,SES,T_DT,SDN,LANG)
         SELECT
           SERVICES.CID                                                     CID,
           PROFILE.FUCODE                                               CODE,
           TO_DATE(SUBSTR(SERVICES.STAT_CHNG,-7,6),'YYMMDD')   T_DT,
           PHOR.NUM                                                               SDN,
           C_ALL.cLANGUAGE                                      LANG
         FROM
          SERVICES      .....Please give me the solution for this .
    Thank y ou
    Edited by: user636482 on Apr 10, 2009 1:08 AM

    I am getting following errors if I gave " ' " after not null.
    LINE/COL ERROR
    42/8     PLS-00103: Encountered the symbol "AND" when expecting one of the
             following:
             begin case declare end exception exit for goto if loop mod
             null pragma raise return select update while with
             <an identifier> <a double-quoted delimited-identifier>
             <a bind variable> << close current delete fetch lock insert
             open rollback savepoint set sql execute commit forall merge
             pipe
    42/56    PLS-00103: Encountered the symbol "A" when expecting one of the
             following:
    LINE/COL ERROR
             ) , * & | = - + < / > at in is mod remainder not rem => ..
             <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
             LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
             The symbol ", was inserted before "A" to continue.
    42/74    PLS-00103: Encountered the symbol "D" when expecting one of the
             following:
             * & - + ; / at mod remainder rem return returning
             <an exponent (**)> and or || multiset
             The symbol "* was inserted before "D" to continue.
    LINE/COL ERROR
    45/6     PLS-00103: Encountered the symbol "COMMIT"
    52/3     PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
             of the following:
             end not pragma final instantiable order overriding static
             member constructor map
             The symbol "static" was substituted for "PROCEDURE" to continue.
    85/8     PLS-00103: Encountered the symbol "AND" when expecting one of the
             following:
             begin case declare end exception exit for goto if loop mod
             null pragma raise return select update while with
    LINE/COL ERROR
             <an identifier> <a double-quoted delimited-identifier>
             <a bind variable> << close current delete fetch lock insert
             open rollback savepoint set sql execute commit forall merge
             pipe
    85/56    PLS-00103: Encountered the symbol "A" when expecting one of the
             following:
             ) , * & | = - + < / > at in is mod remainder not rem => ..
             <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
             LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
             The symbol ", was inserted before "A" to continue.
    LINE/COL ERROR
    85/74    PLS-00103: Encountered the symbol "D" when expecting one of the
             following:
             * & - + ; / at mod remainder rem return returning
             <an exponent (**)> and or || multiset
             The symbol "* was inserted before "D" to continue.
    88/8     PLS-00103: Encountered the symbol "COMMIT"
    95/3     PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
             of the following:
             end not pragma final instantiable order overriding static
    LINE/COL ERROR
             member constructor map
             The symbol "static" was substituted for "PROCEDURE" to continue.
    133/3    PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
             of the following:
             end not pragma final instantiable order overriding static
             member constructor map
             The symbol "static" was substituted for "PROCEDURE" to continue.
    169/3    PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
             of the following:with out adding " ' " I am getting the previous error which I mentioned in Previous thread(TRUNCATE)
    Thank you

  • Error while executing the sp ORA-21779: duration not active

    Hi there,
    am using Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 and facing typical type of error
    please find the steps below to reproduce it
    in this basically i will pass a comma seperated values and function will return the
    piped table witheach seperated values as new record
    ex :1,2,3,4
    1
    2
    3
    4
    Types created:
    1) Create Type TPOBJ_Return as Object (tnames varchar2 (2000));
    2) Create Type TPObjT_ReturnColl as Table Of TPOBJ_ReturnTable;
    Function created:
    CREATE OR REPLACE FUNCTION WB_FN_ReturnTable
    tNameString IN VARCHAR2
    RETURN TPObjT_ReturnColl
    PIPELINED
    AS
    iOptionSel INT;
    tOptionSel VARCHAR2 (9);
    iLen INT;
    tName VARCHAR2 (50);
    tTempChar CHAR (1);
    ptNameString VARCHAR2(2000);
    BEGIN
    ptNameString:=tNameString;
    iLen := LENGTH(TRIM(ptNameString));
    iOptionSel := 1;
    tName := '';
    WHILE iOptionSel <= iLen
    LOOP
    tTempChar := SUBSTR(ptNameString, iOptionSel, 1);
    IF tTempChar = ',' THEN
    IF LENGTH(TRIM(tName)) > 0 THEN
    PIPE ROW(TPOBJ_Return(tName));
    END IF;
    tName := '';
    ELSE
    tName := tName || tTempChar;
    END IF;
    iOptionSel := iOptionSel + 1;
    END LOOP;
    IF LENGTH(TRIM(tName)) > 0 THEN
    PIPE ROW(TPOBJ_Return(tName));
    END IF;
    return;
    END;
    Table created:
    Create Table test (id number(16))
    Insert into test values (1)
    Please insert from 1 to 10.
    Stored procedure created:
    Create or replace procedure Sptest
    As
    Titems Varchar2(255);
    pvalue Number(16);
    Begin
    Titems :='5,4,3';
    Select MIN(id) into pvalue from test where id not in
    (select tnames from table(WB_FN_ReturnTable(Titems )));
    End;
    Note:
    while executing the sp for the first time am not getting any error
    only ,if making a repeated call for execution then am gettings the errors specified below
    ORA-21779: duration not active
    ORA-03113: end-of-file on communication channel
    ORA-03114: not connected to ORACLE
    can anyone help me on these issue

    Why a pipeline table function? I would not say that a tokeniser function is something that typically should require working in the SQL engine, piping rows. It can be a very straight forward PL/SQL function that returns a collection of strings.
    E.g.
    SQL> CREATE OR REPLACE function tokenise( line varchar2, separator varchar2 DEFAULT ',' ) return TStrings AUTHID CURRENT_USER is
    2 strList TStrings;
    3 str varchar2(4000);
    4 i integer;
    5 l integer;
    6
    7 procedure AddString( s varchar2 ) is
    8 begin
    9 strList.Extend(1);
    10 strList( strList.Count ) := s;
    11 end;
    12
    13 begin
    14 strList := new TStrings();
    15
    16 str := line;
    17 loop
    18 l := LENGTH( str );
    19 i := INSTR( str, separator );
    20
    21 if i = 0 then
    22 AddString( str );
    23 else
    24 AddString( SUBSTR( str, 1, i-1 ) );
    25 str := SUBSTR( str, i+1 );
    26 end if;
    27
    28 -- if the separator was on the last char of the line, there is
    29 -- a trailing null column which we need to add manually
    30 if i = l then
    31 AddString( null );
    32 end if;
    33
    34 exit when str is NULL;
    35 exit when i = 0;
    36 end loop;
    37
    38 return( strList );
    39 end;
    40 /
    Function created.
    SQL>
    SQL> select * from TABLE(Tokenise('col1,col2,col3,,col5,and so on'));
    COLUMN_VALUE
    col1
    col2
    col3
    col5
    and so on
    6 rows selected.
    SQL>
    PS. The TStrings SQL user type is declared as a table of varchar2(4000).

  • Error while executing the application

    Hi Friends,
    I am getting error while executing the application.The error is
    "javax.ejb.EJBException: Transaction aborted; nested exception is: javax.transaction.RollbackException: Transaction marked for rollback."
    Can anybody help me..
    Thanks in advance.

    You need to step through a debugger and find the source of your problem as something is clearly going wrong and causing the transaction to roll back. That is all that message tells us.
    m

  • Error while executing the salweek

    Hi ,
    Error while executing the salweek
    salweek_1~20110508140932~init~system_variables~-1455~ORA-01455: converting column overflows integer datatype~CURSOR FETCH: cursor=c_sys_vars
    Can anyone suggest me to solve the issue?
    Regards,
    Sushanth

    What is your RMS version????????
    Open salweek.pc, find the SQL for the cursor c_sys_vars, execute that in SQL*Plus or whatever and look for funny or very long values.
    Scan further through the Pro*C source code to where it says fetch, and check the datatype definitions of the C variables being fetched into, to be long enough to hold the variables that the cursor produces.
    Search support.oracle.com for this issue.
    If indeed a code issue with a variable type mismatch, file an SR and make sure it is patched.

Maybe you are looking for