New settlement parameters  in   sales order  does not  work

Hi
I have a    sales order for  service material.    It is invoiced.    I  have to settle it.    The  existing  settlement rule  is  wrong. So  I have created a new allocation structure and   changed   settlement  parameter  in     the  sales order.   I save the  sales order.
But in VA88 the settlement does not work. I get error message ' receiver cost element not defined and thet cat. PSG not defined.'
But the same allocation structure work good for new sales order.
Pl advise how  I  can  do the settlement for  old   sales orders,  subsequently changed for  settlement parameter ie allocation structure. 
Thanks
kamala

Hello Kamala
Not an expert on this subject, but here is what I suggest, Try and see if it works.
1) Firstly retract the changes you did in sales order and settle first with the wrong settlement parameter (Old data).
2) Now change the existing allocation structure, don't create NEW ONE. If you change an allocation structure, the changes only affect future settlements.
3) Then reverse the settlement.
4) Now re-do the settlement.
Let me know how it goes. Take care.

Similar Messages

  • Sales order does not allow make-to-order production

    Dear Friends,
    I am trying to do do planned order for sales order in MD50 it was showing the error message as
    "Sales order does not allow make-to-order production"
    Can any one solve this
    Shakthi

    Hi Shakthi,
    It is also possible to set the priority for Requirement Type determination like
    0 Material master strategy, then item category and MRP type
    1 Item Category and MRP Type
    2 as 1, with check for allowed requirement type.
    The transaction for this is same as "Requirement Type Determination :
    Sales and Distribution --> Basic Functions --> Availability Check and Transfer of Requirements --> Transfer of Requirements --> Determination Of Requirement Types Using Transaction
    Look for "Source".
    In this transaction, Please, check "Requirements".
    Please, make sure of the following 2 things :
    1. If you do not set an indicator for maintaining the requirements class: Transfer of requirements is not carried out, irrespective of the specification you make at schedule line level for the transaction.
    So it is necessary to mantain the setting first at the Requirements Class. As mentioned in my earlier posts, the requirement class for the material can be found out from Planning Strategy / MRP3 view --> Main strategy (defined in the strategy group) --> Requirement Class for Customer Requirements.
    The IMG path for "Define Strategy" is Production --> Production Planning --> Demand Management --> Planned Independent Requirements --> Planning Strategy --> Define Strategy.
    2. Once the "Requirements" indicator is set in Requirement Class, the requirements indicator at the Schedule Line decides whether or not you require transfer of requirments for the relevant transaction.
    I hope this should solve your problem.
    Regards,
    Sandeep

  • Layout Options - Page Order Does Not Work Correctly

    I have a Photosmart C7280 All-in-One printer.  The Layout Option - Page Order does not work as expected.  The User Guide (page 95) states that the default for a multiple page document is to print first page first.  The manual states that to print last page first requires one to change the Page Order to "Back to Front".  For my Excel, Word, Internet Explorer and PDF pages, I need to leave the Page Order as "Front to Back" if I want the last page to print first.  This makes no sense.  In addition, I can't get my Quicken reports to print last page first no matter what I try.  Does anyone no why the Page Order does not work as expected for Excel, Word, IE and PDF, and does not work at all for Quicken?

    Keisha,
    If you uncheck the "show" option, then the corresponding HTML for that item is not rendered on the page. Thus, when you try to inspect that item via APEX_APPLICATION.G_F02, it simply doesn't exist.
    One trick that I use when I want to have hidden items on the page, but not make them take up any space, is to concatenate them to items that will be visible.
    Using your query as an example, I would re-write it like this:
    SELECT APEX_ITEM.CHECKBOX(1,ROWNUM,'CHECKED')ATTENDED,
    APEX_ITEM.HIDDEN(2,C.PARTY_ID)
      || APEX_ITEM.HIDDEN(3,C.PARTY_TYPE_CODE)
      || C.PARTY_TYPE_CODE PARTY_TYPE_CODE,
    S.PERSON_ID,
    S.PERSON_FIRST_NAME AS NAME,
    C.PARTY_CASE_ID
    FROM CASE.PARTY C
    INNER JOIN DN.PERSON S
    ON C.PARTY_ID = S.PERSON_ID
    WHERE C.PARTY_CASE_ID = :P18_CDBCASE_ID
    AND C.PARTY_SEQ_NO = :P18_SEQThus, the second APEX report column will contain the HTML for the hidden items PARTY_ID & PARTY_TYPE_CODE, as well as the value for PARTY_TYPE_CODE. When you submit the page, you should not encounter any issues.
    Thanks,
    - Scott -
    http://sumnertechnologies.com/
    http://spendolini.blogspot.com/

  • I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit  mode in edit workspace choose File New Photomerge. However the Photomerge does not work, it does not respond.   The only thing I can come u

    I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit  mode in edit workspace> choose File> New> Photomerge. However the Photomerge does not work, it does not respond.
    The only thing I can come up with is that I found a blog that said that in the Trial version Photomerge does not work, however I do Not have the Trial version, I did at one time but I purchase Adobe Elements. Thank you.

    The blog was incorrect. Photomerge should work in the trial, too.
    When things get weird in PSE the first thing to do is to delete the prefs. Go to the editor preferences>general, click this button and restart the editor:

  • New Apple Keyboard Launchpad F4 key does not work

    New Apple Keyboard Launchpad F4 key does not work
    Hi, I have now got ne new wireless keyboard because my old one broke. I connected the keyboard, the F3 key (Mission Control) functions, the F4 key, especially for Lunchpad does not work, I'm Lion on it, previously on the old keyboard I had in 2009, he occupiedwith Launchpad F5.
    Have System Preferences / Keyboard / Keyboard Shortcuts reset everything goes ......... but not yet!!
    Maybe someone can help me!!
    Thank you
    greeting

    Hi,
         Your migration to Lion brought over a previous hot key preferences document. And this contains one bad key that wasn't updated.
    - Quit System Preferences (if open)
    - Delete this document to remove a carry-over mapping error.
    - Then logout
    Note: That this will delete any existing modified keyboard assignments. Re-assign changes manually.
    Note2: This document is in your users preferences folder.
    ~/Library/Preferences/com.apple.symbolichotkeys.plist
    -Alan

  • Sales order does not extract plant information from material master data

    Hi experts,
    I have created a sales order. However, the plant in the shipping tab can only be manually entered.
    I have made the check:
    the customer material master data does not have the plant info.
    the customer master data does not have it either.
    It is defined in the material master data: sales:general/plant
    But the sales order did not extract this information. Why does this happen?
    Thank you in advance.
    Best regards,
    Fan

    Hello Friend,
    As right stated by you,
    The Plant will be copied from the master data to the sales order, if not it should be manually entered
    The Sequence System will search for the Plant is as follow..
    1. Customer material infor record, If it was not maintained then it will search in
    2. Customer master, if the entre was not maintained in the SHIPPING TAB
    3. Finally it will search in the Material master in the Sales organisation data 1 in the field DELVERING PLANT field.
    So please search whether the entry was maintained in that field at the sales:sales organisation data 1.
    This might be the issue.
    Please revert if you want further details
    regards,
    santosh

  • Sales Order does not show up at the resource level.

    Hi guys,
    I have a flour mill of having 4 processs (resources)
    1). Tempering (cleaning).
    2). Milling.
    3). Blending.
    4). Packing.
    I have two identical sales order. One has been through all the process (resources) and showed in the DS Planning board but, other one has not shown up there. It happens to me couple of times that such sales order do not show up at the resource level. Where should I check and correct? Aslo which way can I follow up these missing sales order? and What shoud I do if this situation happens?
    Thanks
    Shaan.
    Edited by: Shaan313 on Sep 27, 2011 8:22 PM

    313,
    https://service.sap.com/sap/support/notes/1406120
    Since you asked the question, I can assume that you don't have an "S" number.  speak to the person in your company who administers your SAP Service Marketplace account (this is usually someone on your Basis team), who can obtain one for you.
    Or, you can try on your own.  A few stars have to be in alignment for the second method to work.
    https://service.sap.com/request-user
    Best Regards,
    DB49

  • Sales order does not appear in MD04

    Hello,
    One of my sales order is not appearing in MD04. I found out that in the sales order, the requirment type is missing.Is this could be te resaon for sales order not to appear in MD04.
    2nd question) why requiremment type is not there in sales order. In my case, there is no entry in the item cat and mrp type table but in the strategy group in material master, the requirment type exists. so why the system is not showing requirment type in sales order by picking it up from the strategy group. in the item cat +mrp type table, the source is kept as "0", which means the system should pick the requirment type from strategy group . so why it is not picking if it is defined in straetegy group ?/
    Question 3) or is it that the sales orders appear in MD04 only after MRP run but then why other sales orders are apearing before MRP run.
    regards
    sachin

    Hi sachin,
    what planning strategy group is your are using.
    I assume plan stg grop is 20.
    Normal settings for 20 Paln stg grop in material master.
    1.Item category group (such as NORM) on the Sales Organization screen
    2. Set Plan stg = 20 at Mrp View.
    Requierment type fo customer requirement  = KE  assigned  for planning strategy 20 at customizing.
    For 20 plg stg  requiremnt type is   customer requirement type only.
    with above settingsif create sale order it will appear at Md04 before MRP run.
    u can see the customer requ type at "procurement tab "of sale order.
    For planning of material u have to maintain valid MRP type at Mrop view.
    i am not clear about ur second question.
    please comeback
    Regards
    Pradeep

  • Sales order does not consumpt Independent requirement

    Hi Gurus,
    My material is as below:
    MRP Type: M0
    Stategy group:40      Planning with final assembly
    Consumption mode :2 Backward and forward consumption
    My independent Req is 'VSF  Planning with final assembly'
    My sales order item category is 'Zwac', rety is using ZWAC-M0-KSV 'Sales order with consumption'
    but before i create sales order:
    MRP element  Received/Requirement quantity   
    stock             
    IndReq              100-
    After that:
    MRP element  Received/Requirement quantity   
    stock             
    IndReq              100-
    Sales order        90-
    but i expected like this:
    MRP element  Received/Requirement quantity   
    stock             
    IndReq              10-
    Sales order        90-
    Do you know what i did wrong , thank you!
    Regards,
    dragsky

    Dear,
    If you have planning stategy 40 , then PIR qty will be consumed duirng MRP run if both PIR created with VSF and you have incomming Sales Order qty .Let say you have 100 pc PIR and also 150 pc of sales order , run MRP-MD03 ,  it will create 150 pc Planned order or PR .
    If your using and Sales Order is not getting consumed upon while running MRP , then couple of checks in this case :
    1.Is your PIR (created in MD61) "VSF"?
    The requirement type should be KSV to consume with VSF. Please check OVZI to check why your item category in Sales Order get the requirement type 041.
    Here you must have following set up :
    Requirement Class : 041 , Availablity , Requirement Check box Marked and Allocation Indicator-1 .This Alocation indicator basically Controls the consumption of customer requirements with planned independent requirements whereby the customer requirements type is only allocated one consumption strategy.If it blank that means no consumption with customer requirement .
    Please check If you want req. type 041 to consume with VSF, then you have the change the configuration of planning strategy. Use path Production -> Production Planning -> Demand Management -> Planned Independent Requirements -> Planning Strategy -> Define Strategy.
    2. What is the schedule line category in your SO ??  Is it "CP"? You are using customised item categoery zWAC which may be inharited from WAC-Order /Delivery Requirement (OVZI)
    Check and come back.Hope this will address the issue
    regards
    JH

  • I have just bought a new imac over the internet. it does not work. which store do I return it to?

    I have just bought a new imac over the internet. it does not start up which store can I return it to?

    jimoefrompymble wrote:
    I have just bought a new imac over the internet. ...
    If Purchased from Apple... Contact AppleCare... you have 90 days Free Telephone Support... 3 years if you Purchased the AppleCare Protection Plan.

  • I have cs5 on my home mac. I had it on my old mac laptop. I deactivated it then went to reinstall it on my new laptop and my serial number does not work. Any help?

    I have CS5 photoshop extended on my mac home computer. I had it also on my mac laptop. I deactivated it from my old laptop and tried to install it on my new laptop and the serial number would not work. Any thoughts?

    David o"bryan did you migrate/transfer any files/folders/applications to the new Mac laptop?  You can verify that your serial number is valid by checking under your account at http://www.adobe.com/.  You can find more details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  • New ThinkPad Precision Wireless Mouse (MORFGOO) does not work

    Hello to everyone,
    My wireless mouse does not work. The symptoms are: The mouse is completely unresponsive, as if it had no power at all (cannot be turned on, no red laser, no interaction with CPU).
    How I came to notice the problem:
    I installed the mousesuite from lenovo/support/mousesuite. Then I restarted the computer. After this, I connected the USB Bluetooth Adapter to a USB port of the ThinkPad 430s 2352 CTO. I tried to turn the mouse on. No changes were noticed, Mouse still offline, no light. Tried a different set of battery & tried the wireless button. No change. Reinstalled the mousesuite. No noticeable change.
    I believe the mouse might be broken. Could anyone please provide me with support as to how I could solve this? In the case that it is non-functional, how do I return it to lenovo? Is it under my one year guaranty (I bought it as an accessory on my command for my laptop)?
    Thanks for your answers!
    ph423

    Hi,
         Your migration to Lion brought over a previous hot key preferences document. And this contains one bad key that wasn't updated.
    - Quit System Preferences (if open)
    - Delete this document to remove a carry-over mapping error.
    - Then logout
    Note: That this will delete any existing modified keyboard assignments. Re-assign changes manually.
    Note2: This document is in your users preferences folder.
    ~/Library/Preferences/com.apple.symbolichotkeys.plist
    -Alan

  • Can i get a new iphone as my current one does not work

    i have an iphone 4s and my volume does not work. in addition to this my round button does not work either. the power button is broken too. as i am on contract would i have to pay for another iphone?

    Dear,
    You can use the option Assistive Touch (Settings > General > Accessibility >AssistiveTouch On) for use the buttons that be broke. You can turn up and down the volume and use the Power off button.
    If it doesn't work, I would go to carrier shop and if they can't fix it, Surely I'd buy one.

  • UI API issue, clicking base document on sales order does not set ActiveForm

    I have a sales order window open with a sales order loaded.  When I right click and click on base document, the sales quotation window shows up properly, however in code when I get the ActiveForm, it is the sales order form and not the sales quotation form!
    Private Sub SBO_Application_FormDataEvent(ByRef BusinessObjectInfo As SAPbouiCOM.BusinessObjectInfo, ByRef BubbleEvent As Boolean) Handles SBO_Application.FormDataEvent
        If BusinessObjectInfo.Type = bo_type.SALES_QUOTATION And BusinessObjectInfo.BeforeAction = False And    BusinessObjectInfo.EventType = BoEventTypes.et_FORM_DATA_LOAD
            SBO_Application.MessageBox(SBO_Application.Forms.ActiveForm.Type) 'shows 139 instead of 149?
        End If
    End Sub
    If quotation data is loaded using the next/prev/first/last buttons on the menu bar, the activeform .Type is 149.
    If quotation data is laoded using the Base Document shortcut on the sales order, the activeform.Type is 139.
    Is that suppose to be correct?  If so, how do I get the new sales quotation form that is created by using the base document shortcut?
    Edited by: Dung Nguyen on Aug 24, 2011 2:12 AM

    János Nagy wrote:
    Hi Dung,
    >
    > Formdataevent is handling trhe data events, not GUI events. In form data load means that the form is data is loaded, not that the form is activated.
    >
    > You must handle menuevent, and in menuevent before_action = false case the active form will be the sales quotation (or child/parent in the document flow).
    >
    > You may use an SDN tool to determine the events. You can download it from:
    > http://www.sdn.sap.com/irj/scn/businessone-tools
    >
    >
    > Regards
    >
    > János
    The problem with form activated is that it is triggered everytime the window is "activated'.  Meaning that if a user clicks out of the form and clicks back in, the form activated event is triggered.
    I need to perform an operation only on the first time the form and data is loaded and/or activated.

  • In sales order does not not show sales bom component

    hi to all,
                it is possible if i create one sales order and i connect one sales bom to order and do not display component of sales bom in sales order so pls tell me procedure.pls tell me how to set print layout of sales order without sales bom component
    Regards
    vishal

    Hi,
    To do not show the component items in Sales Order, you should use Assembly type of BoM.
    Here I copied the differences between them which is from Online Help.
    The sales bill of materials and the assembly bill of materials represent a finished product which is assembled at the sales stage.
    The difference between the assembly bill of materials and the sales bill of materials is as follows:
    ·        Assembly bill of materials; the finished product appears in the sales order document.
    ·        Sales bill of materials; both the finished product and the components appear as separate items in the sales order document.
    Hope this helps you.
    regards,
    maggie an

Maybe you are looking for