New Setup for existing and functioning WRT54G v.5

I seem to have completely messed up my router configuration, and I can't get to 192.168.1.1 to straighten it out.
How do I "erase" all existing setup parameters and start over?
Is this even possible, or do I have to get another router?
Thanks for any help.

After you reset your Linksys router, you can re-configure it...
If your Internet Service Providor is Cable follow this
If your Internet Service Providor is DSL follow this

Similar Messages

Problem in creating new versions for existing DIR using CV01N

I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.B

There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

How to create the new varients for existing generic article.

Hi all,
      Can any body tell how can i create new varients for existing generic article
    T-Code - MM41 ( IS-Retail).
   Plz help, helpful answers will be rewarded.
Regards,
Sai

Hi
If you have access to the program of the tcode, then go to that tcode click on system->status, to get the program name, go to se38 give that program name and select variants radiobutton, create the variant.
Regards
Haritha.

Create new mailbox for existing users?

Hi All,
I am new to JNDI concepts. I need to create new mailbox for existing users in domino directory. is it possible?
Scenario is : I have some users in domino directory. They dont have mail account now. I want to create it.
Kindly guide me...
Thanks,
Ram

Hi,
You can try LSMW (Direct method) for uploading class values.
Upload file can hae following structure:
OBJEK     |     ATINN     |     KLART     |     ATWRT
Release Grou+Release strategy |     Characteristic name     |     Class type     |     Class Value
e.g. rel grp is PO, rel strategy is 01, characteristic name is EBAN_EKORG, and class value is 1000 then
OBJEK     |     ATINN     |     KLART     |     ATWRT
PO01     |     EBAN_EKORG |     032     |     1000
multiple characterstics can be
OBJEK     |     ATINN     |     KLART     |     ATWRT
PO01     |     EBAN_EKORG |     032     |     1000
PO01     |     EBAN_EKGRP |     032     |     100
Regards,
Yogesh

Apply new style for existing paragraph

How to apply new style for existing paragraph
I need to apply existing paragraph style "FEBL1" to bullet list (newstyle)

May be I am not clear with your question.
You want to apply any style to a paragraph, you can use grep function:
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = ".+";
app.findGrepPreferences.appliedParagraphStyle = "FEBL1";
app.changeGrepPreferences.appliedParagraphStyle = "bullet list";
app.activeDocument.changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
OR
You want to add bullet list in your existing style "FEBL1", try the below code:
var pstyles = app.activeDocument.paragraphStyles;
for(var i=0;i<pstyles.length;i++)
    if(pstyles[i].name == "FEBL1")
        pstyles[i].bulletsAndNumberingListType = ListType.BULLET_LIST;
Vandy

I receved a new computer for christmas and my ihone with show up on the new devices on my new itunes but with not connect to the itunes computer music library how do i fix this ?

I have recived a new computer for christmas and dowloaded the new itunes on it but when i hook my iphone 4 up to the new computer with the new itunes it will only show up on the new devices the music i have on it will not show up in the new itunes lirary on my new computer i hate having to hook my iphone everytime to see my music! can some one show me how to fix this!?!?!?!?! PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!

Welcome to the Apple Community.
Which Apple TV do you have.

I received a new IMac for Christmas and set up a new .me account and I'm using this on my IMac and IPhone4S. how do I transfer my music from my old Windows iTunes account to my new Mac account?

I received a new IMac for Christmas and set up a new .me account and I'm using this on my IMac and IPhone4S. how do I transfer my music from my old Windows iTunes account to my new Mac account?

You can red this article about transfering your tunes - http://www.myfirstmac.com/index.php/mac/articles/how-do-i-move-my-itunes-library -from-pc-to-mac-and-keep-my-settings-intact
MJ

How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

I just downloaded the new update for itunes and the itunes store wont open up it is taking a long time it still hasnt loaded since 5pm

i just downloaded the new update for itunes and the itunes store wont open up it is taking a long time it still hasnt loaded since 5pm, i also cant sighn in either it just keeps on saying accessing itunes....

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

I got a new ipad2 for Christmas and I am unable to get it to accept my password for my wifi. I am using the same password that I have always used for all of my other devices. Can somebody help me????

I got a new ipad2 for Christmas and I am unable to get it to accept my password for my wifi. I am using the same password that I have always used for all of my other devices. Can somebody help me????

Hi there
I had the same trouble today, I kept entering the sky password but would not accept, my iMac and iPod work ok but just could not get my iPod to work. But I found the fault, the password is case sensitive and mine on sky is in caps, the up arrows on the keypad put the caps on,but after each letter you must put the caps back or it wil revert to lower case, I hope this may help you

I got the new iPod for christmas and to buy an app it says i need to answer the security questions however i do not remember the answers....what should i do?

i got the new iPod for christmas and to buy an app it says i need to answer the security questions however i do not remember the answers....what should i do?

You need to use your "emergency email" that you used to set up your iPod to change the security questions and answers.

New Blog for SOA and Application server,BPEL

Hi Everyone,
I have created a New Blog for SOA and Application server and BPEL and i would like everyone to have a look at it and give me some comments on it like what is the other information i can keep which can help us all etc....
You can visit it at http://oraclefusionmiddleware.blogspot.com

Oracle Application Server consists of Oracle HTTP and OC4J servers which deploys J2EE-based applications.
Integration server manages all communication, process interactions, Data Transactions among different systems and applications. Oracle integration server consists of all the SOA elements (BPEL, ESB, Business Rules, and OWSM)
when you want to deploy Java applications then you will deploy to Application Server.When you want to deploy BPEL,ESB Process you will use integraion server(BPEL Server,ESB Server).
Integration server is just the web server which connects to application server which helps in administrating and managing different applications as a whole
Regards,
Deepa

How to switch iphone 5 to new pc for backup and sync. lost drive on old pc.

How to switch iphone 5 to new pc for backup and sync without losing anythinng. Lost drive on old pc.

Copy the ENTIRE iTunes folder from the old computer or the backup of the old computer to the new computer.
Connect iPhone.
Sync.

My daugther' iphone id under my wife's email and now all music and pictures are attached to that id. Wife now has an ipad and looking at using the existing id for set up? Would like to establish new id for daughter and not lose or share music/photos?

My daugther' iphone apple id is under my wife's email and now all music and pictures are attached to that id. My wife now has an ipad and I am looking at using the existing id during set up? Thus, I would like to establish new apple id for daughter, associated to her email account, however I do not want to lose or share her music/photos, nor share with my wife's id. Is this possible, or is it best just to establish a new id for my wife, and then change the email address associated with the existing apple id?

well if you establish a new apple id for your wife that would be best unless you email all of the existing photos to your email and then when you have established a new id then you log into your email on the new id and save all of your pics onto it by pressing on tthe pic for about 5-8 seconds then options will come up and you press the save to my album ..as for the music if you can copy and paste, through computer, the songs then awesome!

I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function

I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function

Try CardMunch it works well for me

New Setup for existing and functioning WRT54G v.5

Similar Messages

Maybe you are looking for