New signature for flood control

I am in need of help in writing my own signature to control dictionary attacks on a proprietary application on one of our main frame applications.
I was looking at writing a rule using the flood net engine. Does anyone have more information on what the different variables for this engine are? If I set the rate for 3 and the peaks and gaps to 0, will this block the 4th attempt in a second?
I also need to try to lock this signature down. I could not allow it to block every 4th connection attempt from one IP address. How can you lock this signature down to a specific port and IP address? Does it need to be written into a meta engine signature?
Thanks
Gary

details matter, but that seems like a less than optimal choice for the engine. Load up the signature policy and do a select by "sig name". Enter "failure" in the sig name box and click find. You might try modeling a signature after the one of these (6256-0 for example). Is there anything in the response that you can look for?

Similar Messages

Sub-accounts on new computer for parental control, access to itunes library

I have established sub-accounts on my new iMac in order to activate parental controls. Does anyone know how I can grant the sub-accounts access to the libraries in the itunes account in the administrative account?

Tried hooking up my external drive to my Mini. This morning my Mini had all my info listed, but I couldn't play any songs, for obvious reasons. Now, my Mini is hooked up to the external, iTunes prefs are set on the path to the external - but there is no music in iTunes. No lists, no songs, nada. Just a virgin iTunes window. ***?

How to add new signature in Control Recipe

Hi Friends
I am trying to add new signature/user id in control recipe. But I did not find any option. Can anybody guide me as how to add. Pls send me step by step procedure.
Thanks

Hi,
The list of cost centers in which the activity type is planned is given in KL02 under planning data. In order to add a new cost center to this, you need to enter the activity type in transaction KP26 for a particular year.
Goto transaction KP26
Give version - 0
from period 1 to 12
year - 2011
cost center - mention the cost center
Activity type - mention activity type
goto overview screen F5 and add the plan price for the activity in the cost center. This step will automatically add new row in the activity type control data.
Hope this helps.
Thanks,
Ram

How do I create a new emkey for Enterprise Manager Database Control?

Hi,
I just installed 11gR2.
I am evaluating it.
How do I create a new emkey for Enterprise Manager Database Control?
I tried various combinations of this command:
emctl config emkey
I did find a probable bug:
$ emctl config emkey -emkey -emkeyfile emkey.ora -force -sysman_pwd he11ow0rld
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Undefined subroutine &EmKeyCmds::promptUserPasswd called at /u2/app/oracle/product/11.2.0/dbhome_1/bin/EmKeyCmds.pm line 160, <FILE> line 3.
$
Again,
How do I create a new emkey for Enterprise Manager Database Control?
I do have a copy of my old key but it is no longer good because I reinstalled the repository with these commands:
emca -repos drop ...
emca -repos create ...
Oh, and where is emctl "documented".
I poked around in some book-index links and with the search engine.
I could not find anything.
Thanks,
-Janis

user11892726 wrote:
Oh, and where is emctl "documented".
http://download.oracle.com/docs/cd/B16240_01/welcome.html

I have just upgraded to Mountain Lion and my signatures for my Mail is not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice

I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.

I had this and fixed it.
I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
After lots of hunting, I found the Signature Folder. It's in:
Yourusername>Library>Mail>V2>MailData>Signatures
Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
Since this was literally a clone of my previous setup to a new machine, here's what I did:
1. Quit Mail
2. In Problem machine, go to
Yourusername>Library>Mail>V2>MailData>Signatures
3. Move the Signatures folder someplace safe, but out of the MailData folder
4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
5. Start Mail on the problem machine
This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
Hope this helps

I am using strobe media playback but i want to add new button for subtitle in control bar,Can anybody tell me how can i do it.

I am using strobe media playback but i am not able to add new button for subtitle in control bar.
I have imported assets.fla file in Flash professional but i do not understand how add new button in this fla and then link with action script method to show subtitle.If anybody know about it please tell me.

Hi,
Yes you can add video subtitle and I can give you the details how to do
that. Can you please advise which type of files you have for video
subtitile and how many language you want to add. i.e. text files or xml
files.
Best regards,
Sunil Kumar
On Thu, Jan 15, 2015 at 5:22 PM, Add Subtitles to OSMF and <

"cwui"Error loading control. A newer version needed. The defaultsettings for the control will be used.

各位先進:小弟最近在執行一個執行檔(.exe)時，跳出了"cwui"的視窗，上面寫著"Error loading control. A newer version needed. The defaultsettings for the control will be used."執行檔沒辦法動作，不知道是哪個地方出問題了...煩請各位解答我的苦惱之處!!感激不盡~

請看看您的錯誤是否跟下面這個一樣
http://digital.ni.com/public.nsf/allkb/627F8B1A99A72DBC862578770051FB9B
若不是的話煩請提供您
1. 錯誤訊息截圖
2. 作業系統版本(是否是64-bit)
3. LabVIEW版本
4. 佈署端電腦所安裝的Runtime Engine版本
5. 程式中有使用到的module或toolkit，例如：DSC, OPC server....等
謝謝！

Please can u add 3G shortcut on control center in new ios for iphone

Please can u add 3G shortcut on control center in new ios for iphone

Sorry but this doesn't address Apple. We are users in the community. You can email https://www.apple.com/feedback/ for Apple to see your request

How to pop up "Drag New signature rectangle" window from plug-in?

Hi, everybody
       I am trying to create a menu that contains menuitem "sign". when the user click on menu->"sign" a window pop-up
       asking for "Drag New signature rectangle" from the user.This window is same as poped up by default by digSig.
       Problem is Which API should be used to pop this window.
       Any kind of help will be welcomed.
                                                                                                                    Thanks and Regard

Thanks soooooooooooooooooooooooooooooooooooooooo much!!!!!!!!!!!!!!!!!!!!!!!!! This is EXACTLY what I want to do!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! wuwuwuwuwuuwuwuw....................want to cry~~~~~~~~~~~~~~~~~thanks thanks~~~~~~~~~~~~~~~~~~~~~``

After backing up my phone to the new iphone 4S, voice control comes on every time I try to use siri?

After backing up my phone to the new iphone 4S, voice control comes on every time I try to use siri? I have to newest itunes so what should I do? I completley can not use Siri

Some advice from various locations on the web (use google). Each works for some users, not all. Give these a try.
Try to deauthorize the computer then authorize it.
select song or app. that's not authorized, itunes will ask for your password, enter password, click ok, and ok again. Done.
I had the same problem when I switched from my laptop to a macbook. What I figured out was that I had purchased applications under two different email addresses. You can click on one of the applications that is not syncing and go to "File" then "Get Info" to find out what email address you used to purchase those applications. Hopefully this helps.
Sometimes a reboot of either the computer or the iPhone or both fixes this, if you’ve authorized already.

How to add new field to table control data not displayed

hi
I have added some nwe fields to already existing table control added three new fields...
though the recoreds are inserted in teh table properly with the three new fields user id data and time fields
but on display only the data is not shown in these three columns though the data is coming in internal table...but not to the screen output
pls suggest where the problme may be
nishant

First try the small button Configuration on top right of the table control, as displayed when you run the program. Hit 'Administrator' and see if the fields are checked as invisible. Uncheck them, activate and save.
If the fields are not in that list at all, then check if the table control is initialized for the screen you use. For example
CONTROLS: tc_ent_lines TYPE TABLEVIEW USING SCREEN '0100'.
but you copied your screen and use the same table control in the new screen 0200. Then all you have to do is
REFRESH CONTROL 'TC_ENT_LINES' FROM SCREEN '0200'.
before you show the screen.

I have multiple emails, how do I add different signatures for each email address

I have multiple emails for different companies I work for, how do I add a different signature for each one, it seems like I have to use the same one for all of them

Thanks. I think I'm on the right track. I added the email address to my contacts and double clicked the image icon to change it, but it only lets me snap a new picture or select an image from another location. What is the folder location of the stock icons that come with Mac OSX?

How can I set up a custom keyboard shortcut for volume control?

Hi all,
I use my black MacBook at work, connected to an external monitor and external keyboard. I'm looking for a way to set up the F buttons on my external keyboard as volume control, just as they do on my laptop keyboard. Looking for F3 to F5 to be volume mute, down, and up, respectively.
I tried going into Keyboard Shortcuts in System Preferences but since there is no menu item for volume control I can't seem to add it. Anyone know how I can go about doing this or what I'm missing?
Thanks
Mike

paste the following into Applescrpt Editor (it's in /Applications/Utilities)
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #ADD8E6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
set curVolume to output volume of (get volume settings)
-- work out the new setting
if curVolume < 96 then
set newVolume to curVolume + 5
else
-- can't go over 100
set newVolume to 100
end if
-- and apply it
set volume output volume newVolume</pre>
this script will increase volume by 5 (out of 100) any time you run it. you can adjust this of course. save the script somewhere.
You can use a 3rd part app launcher to bind a keyboard shortcut to it. I use Butler. there are many others: Quicksilver, ikeys, quickeys, Spark, Launchbar.
this will work the fastest.
If you don't want to use 3rd party tools for this you can make a service using automator but that might be a bit slower than the first option. open automator. it will give you a pulldown screen wiuth the choice of what you want to make. choose "service". set it to receive no input and be available in all applications. add the following "run apple script" action to the service
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #ADD8E6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
on run {input, parameters}
set curVolume to output volume of (get volume settings)
-- work out the new setting
if curVolume < 96 then
set newVolume to curVolume + 5
else
-- can't go over 100
set newVolume to 100
end if
-- and apply it
set volume output volume newVolume
end run</pre>
save the service, go to keyboard system preferences->keyboard shortcuts->services and make a shortcut for the service you just created.

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to create a new Condition for tax as VAT ( 4 % ) in SAP ? .

Dear All ,
Pl guide that " How to create a new Condition for tax as VAT ( 4 % ) in SAP ? . What are all necessary requirements to do so , I need to have all steps so that i should feel very confident . For example what data is to be ticked in Control tab during cond. creation , in the same way how to put this cond. in Pricing procedure ? pl write all necessary thing which are required during this process .
Thanx & deep regrads to all in adv.
sap11

In tax we can configure taxprocedure two types i.e., taxinn and tainj. If you adopt taxinn procedure if it is other than VAT condition first you have to create the condition type and then you have to go to FTXP and assign the tax required VAT percentage to the repective % to ded or non ded VAT condion type. In second step you have to assign this tax code to respective company code.
If you adopt taxinj procedure you have to a create tax code with FTXP T-code by assigning the values to the respective and save conditions.
Regards,
Bhuvan

New signature for flood control

Similar Messages

Maybe you are looking for