New Site Server with Distribution Point & Software Update Point Roles not pulling SUGs

I just set up a new server & installed the DP & SUP roles on it. I am getting the following in the log this is just a small sample as its kind of repetative:
Report state message 0x8000094F to MP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Report Body: <ReportBody><StateMessage MessageTime="20140328183445.000000+000" SerialNumber="0"><Topic ID="FPP00002" Type="901" IDType="0"/><State ID="2383" Criticality="0"/><UserParameters
Flags="0" Count="2"><Param>FPP00002</Param><Param>["Display=\\FPPSCCM02.FPP.WUCON.WUSTL.EDU\"]MSWNET:["SMS_SITE=FPP"]\\FPPSCCM02.FPP.WUCON.WUSTL.EDU\</Param></UserParameters></StateMessage></ReportBody>
SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Report status message 0x8000094F to MP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Status message has been successfully sent to MP from remote DP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Retry 10 times SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Start to evaluate all packages ... SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Start to evaluate package 'FPP00002' version 0 ... SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Report status message 0x4000094C to MP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Status message has been successfully sent to MP from remote DP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Failed to evaluate package FPP00002, Error code 0x80070002 SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Report state message 0x8000094F to MP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Report Body: <ReportBody><StateMessage MessageTime="20140328183445.000000+000" SerialNumber="0"><Topic ID="FPP00002" Type="901" IDType="0"/><State ID="2383" Criticality="0"/><UserParameters
Flags="0" Count="2"><Param>FPP00002</Param><Param>["Display=\\FPPSCCM02.FPP.WUCON.WUSTL.EDU\"]MSWNET:["SMS_SITE=FPP"]\\FPPSCCM02.FPP.WUCON.WUSTL.EDU\</Param></UserParameters></StateMessage></ReportBody>
SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Report status message 0x8000094F to MP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Status message has been successfully sent to MP from remote DP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Report status message 0x40000952 to MP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Status message has been successfully sent to MP from remote DP SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
DP monitoring finishes evaluation. SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
Failed to evaluate some packages after 10 retry SMS_Distribution_Point_Monitoring 3/28/2014 1:34:45 PM 6444 (0x192C)
The Console shows for the DP that it's waiting for content and I don't see where I can create a Prestage Package
# When I wrote this script only God & I knew what I was doing. # Now, only God Knows! don't retire technet http://social.technet.microsoft.com/Forums/en-US/e5d501af-d4ea-4c0f-97c0-dfcef0192888/dont-retire-technet?forum=tnfeedback

D:\SMS_DP$\sms\logs\smsdpmon.log
This is the 2nd server in our SCCM 2012 Sp1 Hierarchy. It is set up with the following Site System Roles:
Component Server
Distribution Point
Site System
Software Update Point
It is Prestaged Enabled. My intent is that the client systems @ the location where this DP is located will use it to pull their Microsoft Updates from as well as content for any Applications we push to them rather than going over the WAN to the Primary
Site Server.
IN Distribution Point Configuration Status. the console shows "Failed to update package" & "Packaget Transfer Manager failed to update the package "yxz00040". Version 3 on Distribution Point server.my.domain.com review pkgxfermgr.log for more information
about this failure."
It also goes on toe list 2 possible causes and solutions
Site servers does not have sufficient rights to the source directory.
(Site server account is a member of local Administrators on Primary)
Not enough disk space available
(I have over 1TB of available space and primary site server has only 150GB available for entire content repository, both applications and sofware updates.)
# When I wrote this script only God & I knew what I was doing. # Now, only God Knows! don't retire technet http://social.technet.microsoft.com/Forums/en-US/e5d501af-d4ea-4c0f-97c0-dfcef0192888/dont-retire-technet?forum=tnfeedback

Similar Messages

New school server won't allow "software updates".

I'm a teacher and through grant writing have acquired several Macs in an all PC district. Recently the district installed a new server, and since then I haven't been able to connect to "software update". The IT guy in the district said that if I had a URL of where the downloads would be coming from, he could unlock the location allowing the software update to work. Does anyone have an idea as to what URL, if that's even the right term, I should tell him I need unlocked?
An example, iTunes announces there is a new version and asks if I'd like to download it. I click yes, software update opens and tells me my software is up to date...which it isn't.
Thanks for any help,
Dan

Dan Reinagel wrote:
Thanks for the reply,
I could download them individually, but I've got 8 computers, and just having them update automatically is so much easier.
However, I 'm going to give the IT guy the URL you provided. There's a chance that because that site is being blocked I can't download the updates automatically.
Looks like the automatic update mechanism uses a machine called swscan.apple.com. If they can unblock by name, that should be a good start.
charlie

Software Update Point doesn't show Win 2012 R2 and Windows 8.1 updates

I started deploying Windows 2012 R2 Datacenter servers and some Windows 8.1 workstations. I wanted to make sure that my Software Update Point was downloading updates available to those OS's and after going in to Administration -> Overview -> Site Configuration
-> Sites -> Configure Site Components -> Software Update Point, I notice that those OS's weren't available to select.
I then did some searches on the web and thought my problem was two fold:
1 - I was using SCCM 2012 SP1.
2 - My SCCM 2012 Software Update Point was on a Win 2008 R2 server
So the first thing I did was upgrade from SCCM 2012 SP1 to SCCM 2012 R2. I then created a Windows 2012 R2 Datacenter server and installed WSUS on it. I then added the server as a Site System Server, added the Software Update Point to it and configured it.
Unfortunately, this still didn't help me as you can see from the screen shots below:
What am I doing wrong and what needs to be done to have all the updated Operating Systems and Microsoft Software added to my Product list?
Thanks... Frank

To follow on to narcoticoo's statement, have you actually initiated a catalog sync from within the ConfigMgr console yet? If so, has it completed successfully (you can check the moniotring workspace or you can watch the wsyncmgr.log).
Jason | http://blog.configmgrftw.com
Jason...
I just ran a Synchronize Software Updates from ConfigMgr Console. I then went Monitoring -> Software Update Point Sync Status. It's showing my new WSUS server ( 2012 R2 ) but it's not showing any updates are being sync'd through it. See this screen shot:
I then went to the wsyncmgr.log file on my site server which is the OLD WSUS server ( Win 2008 R2 ) and say this:
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=PREP-SCCM12.<domain.org> SITE=STA PID=5224 TID=4028 GMTDATE=Wed Feb 26 19:00:40.236 2014 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found on site STA. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.236+300><thread=4028 (0xFBC)>
Sync failed. Will retry in 60 minutes $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.279+300><thread=4028 (0xFBC)>
Setting sync alert to active state on site STA $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.313+300><thread=4028 (0xFBC)>
Sync time: 0d00h00m00s $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.360+300><thread=4028 (0xFBC)>
Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\Win 7 Updates up to Aug 2012\0048da55-f46f-4452-b4c1-37c0f295333b\IE9-langpack-Windows7-x86-xho.exe, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.042+300><thread=4028 (0xFBC)>
Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\Win 7 Updates up to Aug 2012, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.067+300><thread=4028 (0xFBC)>
Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\Win2k8 Updates Until Aug 2012\000f8a0a-825c-457b-a15b-57ade145a09b\windows6.0-kb2653956-x64.cab, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.119+300><thread=4028 (0xFBC)>
Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\Win2k8 Updates Until Aug 2012, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.144+300><thread=4028 (0xFBC)>
Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\Win 7 Updates for Sept 2012\10f3ec1c-f096-4a82-ae41-440ba5328467\Windows6.1-RTM-Client-NEUTRAL-X86.EXE, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.173+300><thread=4028 (0xFBC)>
Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\Win 7 Updates for Sept 2012, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.199+300><thread=4028 (0xFBC)>
Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\XP Updates Until Sept 30\17165524-99fa-49f7-91e6-457d43d4a48e\Windows-KB890830-V4.12.exe, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.228+300><thread=4028 (0xFBC)>
Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\XP Updates Until Sept 30, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.254+300><thread=4028 (0xFBC)>
It appears to me that when doing a Sync, it's still trying to use my OLD WSUS server instead of my new one. I removed the Software Update Point from the OLD WSUS server and uninstalled WSUS from it. I'm not sure why it's still trying to sync from the old
server rather than the new one. Any ideas?
Thanks... Frank

WSUS and Software Update Points

Hi, We are looking at expanding our use of Config Manager 2012 SP1 to handle all of our WSUS patching needs.   Today we use a local standalone WSUS install that is on the config manager server and have the software update point setup on this
same config manager server.   We are using this setup to update a small collection of System Center machines.
We also have a full blown wsus server on a different machine and this wsus server has been doing all of our patching for all the corporate servers/workstations,etc.
we would like to start using this full blown wsus machine as our software update (wsus) synchronization source since it has much more space and is dedicated to Patching alone.
Is it better for me to install a software update point on this full blown WSUS server, Or is it better for us to use this older WSUS server as an upstream synchronization source?    I have read that "The software update point site system
role must be created on a server that has WSUS installed"
If we are better off installing the software update point on the older WSUS server, does this have to be the first software update point installed? Do I have to remove the software update point we setup initially on our config manager server and start
over?    I ask because the technet documentation says "The first software update point that you install is configured as the synchronization source, which synchronizes the updates from Microsoft Update or from the upstream synchronization
source."
Thanks in advance.
Thanks Lance

First, how many clients are you managing?
Next, space is irrelevant. The WSUS instance once integrated into ConfigMgr does not handle updates, it only handles the update catalog. So no space is really needed except in the DB to store the catalog (EULAs are also downloaded and stored; however, these
are quite small text files).
The software update point is simply a thin layer of management on top of the WSUS instance thus yes, it must be installed on the same system as the WSUS instance.
Also remember that once integrated, no management should be done in the WSUS console at all because as managed, WSUS simply downloads and provides access to the update catalog and no the updates. The updates are deployed using ConfigMgr itself.
Jason | http://blog.configmgrftw.com

Use SCCM as a standard WSUS server as well as a Software Update point?

Is it possible to use SCCM as a standard WSUS server as well as a Software Update point? I have 2 scenarios:
1) create software update packages and deploy them via software update groups in Configuration Manager
2) configure a group policy to set internal WSUS server to the SCCM server with SUP role, and allow servers to pull updates
- Is this technically possible?
- Do I need to pre-download the updates that i want delivered via method (2) above ?
I am running Systems Center Configuration Manager 2012 R2 with SUP installed.

100% agree with Jason. Sounds like a idea full of hassle and I'd imagine weirdness could creep in. I'd use ConfigMgr to patch the servers for the advanced reporting alone.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.

Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.
iMac, OS X Mountain Lion (10.8.4), trying to get Logic Pro X

Hello jst84,
The following article may be helpful in getting your purchase to complete.
Mac App Store: "An unknown error occurred (100)" when purchasing
http://support.apple.com/kb/TS3637
Cheers,
Allen

When i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version. What to do?

when i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version. What to do?

Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X

My IPAD won't accept my wi-fi password. I have tried resetting all settings and network settings but still won't accept it. Can't download to new version of IOS either, says software update server could not be contacted.

my IPAD won't accept my wi-fi password. I have tried resetting all settings and network settings but still won't accept it. Can't download to new version of IOS either, says software update server could not be contacted.

Yes I have put in the correct password, its all numbers so can't get it wrong really.
It has connected before as has my iPod and that won't connect either. I have checked that they aren't on the blocked list of the wi fi. Managed to download the new version of iOS and that hasn't made a difference.
I have the wi fi plugged directly into the computer rather than the booster hub as the computer won't connect to it when its in the hub. I did get the iPad to connect to the internet when it twas in the hub but once I upgraded the iOS it won't accept the wifi password in the hub either.

Software Update Point Switching is not working for some Clients

Hi there,
I found nothing similar here and I hope this is the right section.
I´m running ConfigMgr 2012 R2 where one of the Site Systems from one of the Primaries is located in an untrusted Forest in a perimeter Network. The Site System there has the MP, SUP and DB Roles. In general it works great. The Systems in that untrusted Forest
get the SCCM Agent pushed, see and can install published Software packages and receive Windows Updates. But there are a few systems where everything works, except Windows Updates.
So I had a deeper look at what is happening and found out that the SUP switching is not working for them. They always try to contact the SUP from the Primary, which they cannot reach (this is intended).
From how I understand SUP switching as described here
http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx#pi140062=1
the Windows Update Agent tries to connect to a SUP every 30 minutes and after 4 failed attempts he will try to connect to the next one until he finds one which works.
As I said before, this seems to work for most systems in the untrusted forest, but some do not make any intentions to switch the SUP.
So my next step was to find out from where the Update Agent can get the information of the available SUPs. I think they either don´t receive the information that other SUPs exist, or if the Information is there, they don´t realize that there´s an error and
make no attempt to switch.
I used the System Center Support Center to gather all Information from some of the systems with that problems (Log Files, WMI information, registry information, policies etc.) but I cannot find where SCCM or the Update Agent store the information which SUPs
are available in my environment.
I´m sure the problem is on the Systems which fail to connect to the right SUP and not in the SCCM infrastructure itself, because for most of the systems everything is working just perfect. Unfortunately in the Blog Post above there´s also no information
where this information is stored and how it is obtained by the clients. In the comments there´s even one post which describes the same problem I have here, but there was no answer. I hope someone can point me into the right direction, because I´m stuck currently.
Things I tried additionally to all the log file / WMI / registry sniffing:
Removing the Software Distribution Folder and restarting the Windows Update Agent
Removing the WindowsUpdate Registry folder in the HKLM\SOFTWARE\Policies\Windows section in the Registry and restarting the Windows Update Agent.
Tried to reset the WUAgent with wuauclt /Resetauthorization additionally to the steps above.
I also tried to manually set the WUServer and WUStatusServer Keys in the registry to the new Server, but as soon as the next Update Scan cycle runs, the value is set back to the URL of the Primary Sites SUP
Is someone having additional ideas? It seems to me older systems are more affected (which were configured for a standard WSUS before SCCM 2012 was deployed) than newer ones which were installed when SCCM was in place already. But I don´t know what else to
"reset" on those machines without reinstalling them.

Thank you very much for your response. I must have missed that one by looking through numerous Logfiles. In this, there´s indeed a list of all available SUPs. So according to the LocationServices.log the machine should have a choice.
The WMI Key however, contains just one entry and this is the URL of the Primaries SUP which is not reachable in the untrusted forest. Is it OK that the WMI entry includes only one entry? If yes, what process is putting the results from the LocationServices
into WMI? It seems like the Windows Update Agent is feeded from the WMI Key then. If this is the case my problems seems to be the "communication path" between these two components.
Is this the job from the SCCM Agent, the Windows Update Agent or maybe some third component I´m not aware of? I wonder how I can fix this.

Software update point unable to be installed Sccm2012

Hey all,
I have come across a frustrating issue with SCCM 2012 while trying to install Software update point,
Environment: 1 X single site sccm 2012 SP1 5.00.7804.1300
Wsus to install updates - want to enable Service update point to deploy updates.
History: the Wsus server was configured and initialized
doring the original installation, i reinstalled the WSUS without initial config.
Problem:
the SCCM is unable to install the SMS_WSUS_Control_Manager
Event Log Errors:
Event 1016:
On 07/04/13 21:13:56, component SMS_SITE_COMPONENT_MANAGER on computer SCCMSRV.DOMAIN.LOCAL reported: Site Component Manager failed to install this component on this site system.
Solution: Review the previous status messages to determine the exact reason for the failure. Site Component Manager will automatically retry the installation in minutes. To force Site Component Manager to immediately retry the installation, stop and restart
Site Component Manager using the Configuration Manager Service Manager.
Event 6703:
On 04/07/2013 21:10:35, component SMS_WSUS_SYNC_MANAGER on computer SCCMSRV.DOMAIN.LOCAL reported: WSUS Synchronization failed.
Message: WSUS update source not found on site SYN. Please refer to WCM.log for configuration error details..
Source: getSiteUpdateSource.
The operating system reported error 2147500037: Unspecified error
The WCM.log indicated that updates KB2720211 + KB2734608 event though the updates are installed several times.
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)~ $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 18:45:57.056-180><thread=5972 (0x1754)>
Checking runtime v2.0.50727...~ $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 18:45:57.058-180><thread=5972 (0x1754)>
Did not find supported version of assembly Microsoft.UpdateServices.Administration.~ $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 18:45:57.196-180><thread=5972 (0x1754)>
Checking runtime v4.0.30319...~ $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 18:45:57.197-180><thread=5972 (0x1754)>
Did not find supported version of assembly Microsoft.UpdateServices.Administration.~ $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 18:45:57.210-180><thread=5972 (0x1754)>
Supported WSUS version not found~ $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 18:45:57.211-180><thread=5972 (0x1754)>
STATMSG: ID=6607 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=SCCMSRV.domain.local SITE=SYN PID=3276 TID=5972 GMTDATE=יום ה יול 04 15:45:57.211 2013 ISTR0="SCCMSRV.domain.local" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 18:45:57.211-180><thread=5972 (0x1754)>
Remote configuration failed on WSUS Server.~ $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 18:45:57.212-180><thread=5972 (0x1754)>
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=SCCMSRV.domain.local SITE=SYN PID=3276 TID=5972 GMTDATE=יום ה יול 04 15:45:57.212 2013 ISTR0="SCCMSRV.domain.local" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 18:45:57.212-180><thread=5972 (0x1754)>
Setting new configuration state to 3 (WSUS_CONFIG_FAILED)~ $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 18:45:57.214-180><thread=5972 (0x1754)>
Waiting for changes for 60 minutes $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 18:45:57.214-180><thread=5972 (0x1754)>
Trigger event array index 0 ended. $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 18:45:57.215-180><thread=5972 (0x1754)>
SCF change notification triggered.~ $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 18:46:02.977-180><thread=5972 (0x1754)>
Populating config from SCF $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 18:46:02.977-180><thread=5972 (0x1754)>
Waiting for changes for 60 minutes $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 18:46:02.981-180><thread=5972 (0x1754)>
Shutting down... $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 18:53:59.991-180><thread=5972 (0x1754)>
Shutting Down...~ $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 18:53:59.994-180><thread=5972 (0x1754)>
SMS_EXECUTIVE started SMS_WSUS_CONFIGURATION_MANAGER as thread ID 7164 (0x1BFC). $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 19:15:33.486-180><thread=5940 (0x1734)>
This SCCMSRV.domain.local system is the SMS Site Server.~ $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 19:15:33.539-180><thread=7164 (0x1BFC)>
Populating config from SCF $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 19:15:33.551-180><thread=7164 (0x1BFC)>
Setting new configuration state to 1 (WSUS_CONFIG_PENDING)~ $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 19:15:33.554-180><thread=7164 (0x1BFC)>
Changes in active SUP list detected. New active SUP List is:~ $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 19:15:33.554-180><thread=7164 (0x1BFC)>
SUP0: SCCMSRV.domain.local, group = , nlb = ~ $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 19:15:33.555-180><thread=7164 (0x1BFC)>
Updating active SUP groups...~ $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 19:15:33.555-180><thread=7164 (0x1BFC)>
Waiting for changes for 1 minutes $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 19:15:33.556-180><thread=7164 (0x1BFC)>
Wait timed out after 0 minutes while waiting for at least one trigger event. $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 19:15:34.560-180><thread=7164 (0x1BFC)>
Timed Out...~ $$<SMS_WSUS_CONFIGURATION_MANAGER><07-04-2013 19:15:44.598-180><thread=7164 (0x1BFC)>
Event 1:
System.NullReferenceException\r\nObject reference not set to an instance of an object.\r\n at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryPropertySingleItem.get_IntegerValue()
at Microsoft.ConfigurationManagement.AdminConsole.SoftwareUpdateHelper.DisplayUtilities.GetSupSyncStatusIcon(Object sender, ScopeNode scopeNode, IResultObject resultObject, AssemblyDescription& resourceAssembly)\r\n
Any ideas?
Reagards
Asaf

WSUS was installed and configured and work fine a few monthes ago as a part of the first try to install SUP before aplying SP 1 to SCCM.
Both SCCM and WSUS are installed on the same server.
now we want to deploy all updates from SCCM SUP, and the installation failed.
after researching online, uninstalled WSUS completely from the SCCM server, and removed SUP from the Site and rebooted the server.
installed WSUS 3.0 SP2, when initial config of the WSUS popped up i canceled it, the only config i made
is at the installation wizard, set the port to 8530, folders location and internal DB.
>> i am able to open the WSUS console and connect to the "localhost" but no settings
are configured.
installed update 2734608, reboot.
Installed SUP.
and here we are.

Adding a Software Update Point to an existing WSUS install.

I'm looking into migrating my existing WSUS server to SCCM but I have a couple issues that I need clarification on.
I would like to configure SCCM to synchronize directly with Microsoft Updates in place of WSUS but I'm not sure how I would transition from it. With my current WSUS installed on the same server as my SCCM Primary Site, would I have to remove then reinstall
WSUS so the Software Update Point can use WSUS properly?
I also have two additional SCCM locations acting primarily as Distribution Points. I have no secondary sites. Would these two DPs replace the two WSUS downstream servers I have running? I am fully updated to the R2 version of SCCM2012 for reference. Thank
you.

Removing and reinstalling WSUS (including the database) would be the best option. WSUS is only used for scanning purposes; the updates will be downloaded from DPs - so those DPs will somehow replace downstream servers.
Torsten Meringer | http://www.mssccmfaq.de

SCCM 2012 SP1 WSUS/Software Update Point Synchronization error on CAS.

Hi All,
Good day to all you.
I would like to seek all your help on this issue that i have encountering.
My SCCM 2012 SP1 CAS are having a synchronization error in WSUS/Software update point. The CAS have intergrated WSUS role in it. The last good synchronization was on July 16, 2014. No error log found on WCM.log and WSUSctrl.log
Error:
Sync failed: UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall).
Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM 5776 (0x1690)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:05:32.796 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
ISTR1="UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM 5776 (0x1690)
Sync failed. Will retry in 60 minutes
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
below are wsyncmgr.log:
Setting sync alert to active state on site C01 SMS_WSUS_SYNC_MANAGER (0x1690)
Sync time: 0d00h01m14s SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Wakeup for a polling cycle SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Starting Sync SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Performing sync on retry schedule SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Read SUPs from SCF for MYHQKUL990707S.sdb.com SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
Found 1 SUPs SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
Found active SUP MYHQKUL990707S.sdb.com from SCF File.
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:04:20.750 2014 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:04:20 PM
5776 (0x1690)
Synchronizing WSUS server MYHQKUL990707S.sdb.com SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
STATMSG: ID=6704 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:04:21.763 2014 ISTR0="" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:04:21 PM
5776 (0x1690)
Using account sdb\SCCM-Admin to connect to WSUS Server
SMS_WSUS_SYNC_MANAGER 5776 (0x1690)
Synchronizing WSUS server myhqkul990707s.sdb.com ...
SMS_WSUS_SYNC_MANAGER 440 (0x01B8)
sync: Starting WSUS synchronization SMS_WSUS_SYNC_MANAGER
440 (0x01B8)
Sync failed: UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall). Source:
Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM
5776 (0x1690)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=MYHQKUL990707S.sdb.com SITE=C01 PID=6948 TID=5776 GMTDATE=Tue Jul 22 07:05:32.796 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncWSUS"
ISTR1="UssNotFound: WebException: The request failed with HTTP status 404: Not Found.~~at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 7/22/2014 3:05:32 PM
5776 (0x1690)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
5776 (0x1690)
All response is much appreciated
Thank You

Hi,
I recommend you look at the IIS log. Maybe it can give us some clues.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.

I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted? "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.
I stopped in to see one of the genius at the local store who referred me to "Windows Installer 4.5 Redistributable" (I am trying to install it on a Windows XP System)
The last version on iTunes on my PC was iTunes 7.
Thanks for your help,
Julia from Woodridge

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

HT202879 I am stumped - trying to open a recent Pages file but error message says that I need a "newer version" of Pages. My software updates show that there are no updates available. I recently updated Pages but it is not consistent.

I am stumped - I am trying to open a recent Pages file (created with a newer software that I thought was correctly installed recently) but error message says that I need a "newer version" of Pages. My software updates show that there are no updates available. Pages 09 version 4.3 shows as my current version.

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5/5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Pages 5.1 sometimes can not open its own files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has not only managed to confuse all its users, but also itself.
Note: Apple has removed over 95 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

How to remove the parent-child software update point in sccm 2012 sp1

I have a CAS , Primary site server(1) and secondary site servers (7). I have software update point installed on CAS, Primary server and Secondary site servers as well.
I have a situation to reinstall the software update point which is in primary site server.
So, How to reinstall the software update point in primary site server since this is located in the middle between CAS and secondary site servers.
So, please suggest me, do I have to do anything special apart from the normal steps to uninstall and reinstall the SUP point on primary site server?
I have referred few posts on how to remove SUP
https://social.technet.microsoft.com/Forums/en-US/c7258aad-d968-427b-8826-4829916c14c9/remove-and-re-add-software-update-point-sccm-2012?forum=configmanagersdk
and how to install SUP
http://www.windows-noob.com/forums/index.php?/topic/4467-using-sccm-2012-in-a-lab-part-6-deploying-software-updates/

Hi,
>> please suggest me, do I have to do anything special apart from the normal steps to uninstall and reinstall the SUP point on primary site server?
I just tried to reinstall the SUP on the Primary site(only one SUP on Primary site and there is a SUP on Secondary site). The SUP upstream data source of the Secondary site showed empty and greyed out. But the upstream data source resumed after a while.
It seems nothing special needs to be done.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

New Site Server with Distribution Point & Software Update Point Roles not pulling SUGs

Similar Messages

Maybe you are looking for