NEW SLAVE HD NOT FOUND

I recently installed a second hard drive as a slave. All the installation process went fine, I put some of my personal files in the new slave, but I was trying to change the settings in my slave so that I could be the only one with access to those files, so I went to command+i and change it to no access, but then I chanced my mind and now i cant change it back, and now I dont even see it mounted, the only way i can see it is in system profile.
How do I get it mounted againg so i can see it??? now I dont care to make it private I just want to be able to have access to it and hopefuly I dont loose my data that I have already there.
Any help would be greatly appreciated.
wanna find/see my slave.

If the volume has Mac OS X installed on it, select the disk in the Disk Utility window and click the Repair Permissions button; this will correct the settings. If not, follow the instructions below:
Choose Go to Folder from the Finder's Go menu and enter /Volumes/ as the folder's location. Next, open the Terminal in the /Applications/Utilities/ folder while keeping the Volumes folder open. Type the following into the window:
sudo chown shortname
followed by a space. Drag the volume in question into the Terminal window, press Enter, and then type in your administrator password. Once done, the volume may reappear on your desktop; if not, use:
chmod 755
and then drag the volume back into the Terminal window.
(10460)

Similar Messages

Each time I start up my computer and have my iPhone plugged in, I get a message window that eads "New Wave" file not found in your files....How do I get this file I am missing?

Each time I start up my computer and have my iPhone plugged in, I get a message window that eads "New Wave" file not found in your files....How do I get this file I am missing?

Hey Podieboy,
Thanks for the question. It sounds like you are receiving a message about missing files when you start iTunes. The following resource may provide more information:
iTunes: Finding lost media and downloads - Apple Support
http://support.apple.com/en-us/TS1408
If the file/song is not important, you can simply delete it from your library to avoid this error message in the future:
iTunes 12 for Windows: Delete songs, playlists, or other items
http://support.apple.com/kb/PH20391
Thanks,
Matt M.

New-CMVhd error Not Found - SCCM 2012 R2 CU3

When trying to execute New-CMVhd via powershell in SCCM 2012 R2 CU3 I get a "Not Found" error.
This happens in our production and pre-production environments.
Using the Console wizard works fine.
Command is:
New-CMVhd -Path "\\machine\D$\Windows2012R2Server_SCCM.vhd" -Name "Windows2012R2Server_SCCM" -Version "1.0" -VHDSize 100 -TaskSequencePackageId "XXX00123" -DistributionPointServerNames "server.contso.com" -Description "Built with Deploy Server To VHD Task Sequence." -Verbose
Output:
VERBOSE: Performing the operation "New" on target "Vhd: New".
VERBOSE: Executing WQL query: Select * From SMS_TaskSequencePackageReference_All where PackageID='XXX00123'
VERBOSE: Query options: None
VERBOSE: Executing WQL query: Select * From SMS_DistributionPointInfo where Name='server.contoso.com'
VERBOSE: Query options: None
VERBOSE: Query 'Select * From SMS_DistributionPointInfo where Name='server.contoso.com'' processed 1
results.
VERBOSE: Executing WQL query: SELECT Distinct tspr.RefPackageID FROM SMS_TaskSequencePackageReference_All AS tspr WHERE
tspr.PackageID='XXX00123' and tspr.RefPackageID Not In (SELECT PackageID FROM SMS_Package AS p WHERE
p.PkgSourceFlag=1)
VERBOSE: Query options: None
New-CMVhd : Not found
At line:1 char:1
+ New-CMVhd -Path \\machine\D$\Windows2012R2Server_SCCM.vhd -Name "Windows201 ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (Microsoft.Confi...s.NewVhdCommand:NewVhdCommand) [New-CMVhd], WqlQueryExc
eption
+ FullyQualifiedErrorId : UnhandledExeception,Microsoft.ConfigurationManagement.Cmdlets.Osd.Commands.NewVhdCommand
Can anyone else reproduce this? I have a feeling it will be a premier support call to Microsoft :-(
Thanks

Hi,
Pls try to run the following command to import CM powershell module and change the path to be the CM server before your new-cmvhd command:
import-module 'C:\Program Files (x86)\Microsoft Configuration Manager\AdminConsole\bin\ConfigurationManager.psd1'
Set-Location CMserver:\
“Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.”

Brand new airport extreme not found on utility on iPad

I Just purchased the AirPort Extreme. My first Apple router but all of our devices are apple products with the exception of our pc. Extreme is flashing Amber light and is not found in the airport utility app. I want to enjoy this apple product as much as the others but it's becoming difficul.

OK, thanks for clarifying that for me.
If you have the Setup Guide handy that came with your AirPort Extreme, please head for page 12 and locate the heading to......
Setting Up AirPort Extreme Using an iOS Device.........To Set It Up
The steps here are pretty clear, and we rarely get a question about this but, we'll go through this in case you might have missed something.
1. Tap Settings on the iPad home screen. Settings is the gear looking icon there. Then, tap WiFi. WiFi is on the left side of the screen.
2. Tap the name of the AirPort Extreme. AirPort Extreme is located just under the heading of SET UP NEW AIRPORT BASE STATION there.
In the example below from an iPhone screen, I am setting up a new AirPort Express. So, I would tap on AirPort Express. You will see AirPort Extreme on your iPad screen, so you would tap on AirPort Extreme.
When you do this, that will start up the setup wizard.
3. Follow the onscreen instructions to create a new network or extend an existing network. The setup wizard will analyze the network and suggest the correct setup for you.
Once the AirPort Extreme has been set up, then you can use AirPort Utility to edit or modify any of the settings that you might need to adjust.

New weblogs file not found

Hello. I just set up weblogs for the first time. I enabled weblogs in server admin and chose a theme. I left the default folder for storing files as it was, but I can't access weblogs from the web. I have several sites on my server. I have tried all of them in each of these ways - http://domainname.com/weblog, http://www.domainname.com/weblog and I have even tried using my ip address instead of my domain names. Every time, I get error 404 file not found. Does anyone know what might be going on here? Thanks in advance.

Ok i may have a fix for the vanishing entries broken server and such ..
What 10.4.6 messes a LOAD with is actually our good ole posix files ..
Most of my files inside /Library/Tomcat/blojsom_root/webapps/ROOT/WEB-INF/<USERNAME>/ were set back to root:admin ...
Charming isnt it ? Of course there are NO Ways (POSIX) the process can access these .. so you have to modify a few things .
First : Stop application server and webservices.
Second : make sure permissions inside /Library/Tomcat/blojsom_root/webapps/ROOT/WEB-INF/<USERNAME>/ will list as follow :
1626760 drwxr-xr-x 12 appserve appserve 408 Jun 18 04:14 .
631548 drwxrwx--- 17 appserve appserve 578 Jun 18 04:02 ..
1626761 -rw-r--r-- 1 appserve appserve 65 Jun 18 04:02 authorization.properties
1626762 -rw-r--r-- 1 appserve appserve 1029 Jun 18 04:00 blacklist.filters
1626763 -rw-r--r-- 1 appserve appserve 1611 Jun 18 04:02 blog.properties
1626764 -rw-r--r-- 1 appserve appserve 138 Jun 18 04:00 contextloader.properties
1626765 -rw-r--r-- 1 appserve appserve 543 Jun 18 04:01 emoticons.properties
1626766 -rw-r--r-- 1 appserve appserve 593 Jun 18 04:00 flavor.properties
1626767 -rw-r--r-- 1 appserve appserve 97 Jun 18 04:01 macros.properties
1626768 -rw-r--r-- 1 appserve appserve 709 Jun 18 04:00 plugin.properties
1626769 -rw-r--r-- 1 appserve appserve 192 Jun 18 04:00 referer.properties
1626770 -rw-r--r-- 1 appserve appserve 117 Jun 18 04:00 showmemore.properties
if they dont run the following sudo ed commands .
chown appserver:appserveradm /Library/Tomcat/blojsom_root/webapps/ROOT/WEB-INF/<Username>
Thrid : look up in your /Library/Application Support/Weblogs/ your entries may have been modified as well ..
run the following sudoed :
su
<password>
cd /Library/Application Support/Weblogs
ls -Cauil
if you get root somewhere your entries will be unusable . hence you have again to change the owners .
chown -R appserver:appserveradm /Library/Application\ Support/Weblogs/
ls -Cauil shall now give you the following ...
631548 drwxrwx--- 17 appserve appserve 578B Jun 18 04:21 ./
631542 drwxrwx--- 10 appserve appserve 340B Jun 18 04:21 ../
1626605 -rw-rw---- 1 bertrand appserve 6K Jun 18 03:54 .DS_Store
1626760 drwxr-xr-x 12 appserve appserve 408B Jun 18 04:14 <USERS>/
631613 -rw-rw---- 1 appserve appserve 363B Jun 18 04:00 blojsom.properties
631549 drwxrwx--- 12 appserve appserve 408B Jun 18 04:00 bootstrap/
631594 drwxrwx--- 4 appserve appserve 136B Jun 18 02:06 classes/
631597 drwxrwx--- 13 appserve appserve 442B Jun 18 04:02 default/
631615 -rw-rw---- 1 appserve appserve 228B Jun 18 04:00 dispatcher.properties
631575 drwxrwx--- 20 appserve appserve 680B Jun 18 04:00 lib/
1626559 -rw-rw---- 1 root appserve 116B Jun 18 04:00 plugin-admin-edit-users.properties
631617 -rw-rw---- 1 appserve appserve 270B Jun 18 04:00 plugin-admin-upload.properties
631618 -rw-rw---- 1 appserve appserve 2K Jun 18 04:00 plugin.properties
631560 drwxrwx--- 16 appserve appserve 544B Jun 18 02:06 templates/
631611 -rw-rw---- 1 appserve appserve 1K Jun 18 04:00 velocity.properties
631612 -rw-rw---- 1 appserve appserve 5K Jun 18 04:00 web.xml
631614 -rw-rw---- 1 appserve appserve 185B Jun 18 01:14 xmlrpc.properties
Fourth restart the application server service and web service ..
Enjoy the fix .
Mac os X server 10.4.6 Mac OS X (10.4.6)

New View Object not found

Using the scott schema, in my test workspace I created a BC4J project that had 4 tables/view objects using the wizards and taking all the defaults. I created a UIX-JSP project using those view objects.
Next I created a new table in the database (LoginMaster). I went back to the BC4J project added the entity object (LoginMaster) and allowed the wizard to build the default view object (LoginMasterView) into package1. Then I opened the properties on the AM (ScottModule)to put the new view object in the Data Model property. I tested the ScotMOdule AM and the view object is there and is accessable.
I build a jsp page (using the starter form wizard in UIX-JSP category). I then striped out ALL of the default code and cut-n-pasted ALL of the code from another query form that was built by the "Business Components JSP Application" wizard of the UIX-JSP category. I changed the data source name from "EmpView" to "LoginMasterView" and when I run the application I'm told:
Error Message: Could not locate View Object LoginMasterView in application Package1Module.
oracle.jbo.JboException: Could not locate View Object LoginMasterView in application Package1Module.
As I said, the VO LoginMasterView is in package1. I also verified it is coded in package1.xml andd scottmodule.xml, I suspect it was put here by setting the AM properties.
So what did I leave out or do wrong?
TIA,
Ed.

Edit your package1Module application module and verify that the name of the viewobject in the selected DataModel tree is the same as the name you're providing in your JSP page.
I belive by default a number suffix is added to the VO names in the APpModule datapanel. Basically only VO usages that are included in the application module data-model are "findable" by default using the findViewObject methods. Yes it is the correct name in the DataModel Tree.
Your response got me thinking. What files contain the text LoginMasterView? Well, all the files that conatin that text contain exactly that text. I was told package1.xml in the src directory of my BC4J objects project contained the text (which it did). But then I opened the files Package1Module.xml and Package1ModuleImpl.java and noticed they DID NOT conatin that text (even though it seems they should) so I added it to both of these files. But even after I built the BC4J objects project I noticed that the Package1ModuleImpl.class file is not recompiled (still dated July 4, 2002).
So now I have two new questions:
1. How come Package1Module.xml and Package1ModuleImpl.java did not get updated? What updates them?
2. Once Package1ModuleImpl.java is manually updated and the [roject is built why is Package1ModuleImpl.class not recompiled?
TIA,
Ed.

New wifi printer "not found"??

Ok I have the had the newest iOS since the GM versions were released and my ok'd printer connected to our base computer worked just fine with my iPad. Now our new Epson NX625 which even touts being iPhone & iPad ready is not seen when I try to print from my iPad EVEN THOUGH after installing the Epson iPrint app it will print photos... Why does is my iPad seeing the printer through Epson iPrint for photo printing but not for Pages or Safari??
Thank you in advance!!

Pinger wrote:
Ok I have the had the newest iOS since the GM versions were released and my ok'd printer connected to our base computer worked just fine with my iPad.
It's quite easy to print on any printer wired to a Mac on your network with a slight configuration change in Mac OS. For details see this thread http://discussions.apple.com/thread.jspa?messageID=12638601&#12638601

New movies are not found when connecting to my camera

Hi,
I Use a Sony HDR XR550VE. After soem time of happy use of iMovie, it now no longer discovers new clips at import.
Hooking it up to iMovie and importing new clips has working fine in the beginning untill the point at which I deleted the camera's harddrive content (using the camera's commands), and started making a really long movie (over 6 hrs). THat did not import very well: half of it wasn't discovered via the iMovie import dialogue. Since then, new movies I've shot are not discovered anymore and can't be imported. Accessing the drive directly via the "Import films" option allows me to drill all the way down to the AVCHD-mts source file, but are displayed grayed out and can't be selected to be imported.
Please help.
Thanks,
Jeronias

Hi Jeronias,
Sorry to hear that things have gone a bit pear-shaped for you again.
You may have already tried this, but deleting iMovie's preference file sometimes helps when iMovie is not working as it should. The file can become corrupted in some circumstances, such as when iMovie quits unexpectedly or is "Force Quit".
Close iMovie then, in Finder, navigate to the file named "com.apple.iMovieApp.plist" in your User (Home)>Library>Preferences folder. Drag the .plist file to the Trash. When next opened iMovie will create a fresh file with the default settings, which you can change if desired in iMovie's menu item iMovie>Preferences.
Hopefully, that may get things back to normal.
I'm interested in the procedure you are using (or attempting to use) to import your video into iMovie. I have a similar camcorder, the Sony HDR-SR7, which records AVCHD video to a 60 Gb hard drive. Your model, of course, has a 240 GB hard drive and also records to Memory Stick and SD/SDHC cards.
When I connect my camera via USB and turn it on, a dialogue appears on the LCD touch screen. I then have to touch the hard drive icon in order for the camera to be recognized by my MacBook Pro. With iMovie open, it takes a couple of minutes (maybe less) before the import screen appears. Is this the way you normally go about importing your footage? Of course, you will have 2 import sources - the hard drive and/or a memory card.
Have you tried importing from a memory card using a card reader, rather than connecting the camera? If this works, then the import problem is isolated to the camera itself. I'm assuming that iMovie is not recognizing the hard drive nor the card when the camera is connected via USB.
So, in summary:
What process are you using to import from the camera?
Have you tried using a card reader?
Have you tried deleting the preference file?
John

New Portable HD not found - Please Help

Hi,
I just purchased an external portable hard drive that's supposed to be "plug and play" for both Mac & Windows OS but my Powerbook isn't even picking up the drive. When I insert the USB (after connecting the cable to the drive, per the instructions) nothing happens at all. I then tried it on my desktop running XP and it found the drive with no problems, installed the included drivers & back up software & it's ready to go.
I've seen in other threads here that Disk Utility or the "Finder" could show the drive even if it doesn't auto-mount to the desk top, but when I go to the finder, nothing there (Unless I'm looking in the wrong place?) and in Disk Utility, I see my PB hard drive but that's it. Here's what I've done so far:
-Tested on different system/OS & external HD works fine
-Tried external HD on both USB ports and neither recognize drive to mount (HD light does power on, however)
-Tested my USB ports on PB with flash drive (Cruzer 4GB)& this drive comes up perfectly as usual; as does my iPod and a laptop fan works as well.
The external HD is a Toshiba 320GB HDDR320E03X.
I'm running a Powerbook G4 1.25 Ghz w/ 10.3.9
If anyone has any ideas how I can get this drive to show up and/or reformat it for the Mac (I'm ok w/ not using it for the desktop now), I'd appreciate it.

Hi, Rolo. If your drive is spinning up, lighting up, making normal noises, etc., but not mounting on the desktop, your Powerbook doesn't supply enough USB bus power for your hard drive. This is a very common Powerbook problem for which there is no direct remedy. You will have to provide power to the drive from another source: a) an AC-powered USB hub; b) an AC adapter connected directly to the drive, if the drive has an input port for one, c) a USB 2 CardBus adapter that comes with its own AC adapter, or d) a "Y" cable such as this one that allows your drive to draw power from both of your Powerbook's USB ports instead of just one.

Qosmio X70-A-12 and new BIOS - FILE NOT FOUND

ifi would to download the brandnew BIOS driver (20/12/2013 - 1.40 WIN) i get an 404 !!!
http://www.toshiba.at/innovation/download_bios.jsp?service=AT
Thx for fixing that SOON
Qosmio X70-A-12

how long must we wait?
it is simply not acceptable that you are selling gaming notebooks, which you can not play because you have to have the fear start to burn them!!
finally brings a bios driver out cools this whole s***.
your support is very very bad.
if you have a problem you will be redirected to the forum where nobody helps or granted only s***** advices.
or you should call the expensive special phone number for 1 per minute but please.
I have a qosmio x70 a12, which has cost me nearly 2000 .
I can think for this amount of money you expect service and not dead left (bios 404) or during the day no download limit.
I'm almost compelled, the system cpu to throttle 100mV does not run out of laptop due to overheating. and in battlefield bad company 2 from the year 2010!

New Business Area Not Found

I successfully created new business area in Administration Edition , but in desktop edition while creating a new file for same user, the available list remains empty. Please help me, I am new to this.
Thanks
DSD

Hi DSD,
It sounds like a security / privilege issue to me. You could try the following:
1.) In Discoverer Admin can you confirm that the person and responsibility you are logging into Desktop with, has been given access to the Business Area in Tools>Security.
2.) In Discoverer Admin could you also check in Tools>Privileges to ensure that that the Desktop user has ‘User Edition’ selected.
3.) If you have more than one End User Layer (EUL) then it could be that you are logging into the wrong one. In Desktop click Tools>Options>EUL and ensure there aren’t more that two in the list. If there are select the correct one that you want to connect in as. Log out of Desktop and then back in again.
For more information in Security and Privileges read one of Oracle Guides.
http://www.oracle.com/technology/documentation/discoverer.html
Hope this helps,
Lance

New error message--not found elsewhere on the Internet

For the past week I've been getting this error message when I open iTunes:
"The iPod 'Zach's iPod' cannot be updated. An unknown error occurred (-208)."
My iPod, however, still appears on my desktop, under devices in iTunes, and iTunes updates it as well.
Does anyone know what this message means and how I can correct it? I called AppleCare, but the representative had never heard of it either.

Does this help?
http://docs.info.apple.com/article.html?artnum=61031

How do I get past the drivers not found problem during Windows 7 install?

I have a brand new (March 2012) MBP running Mac OS 10.7.3 (Lion) with a SuperDrive. I'm trying to use Boot Disk Assistant to install Windows 7 with a valid Windows 7 DVD burned from an .iso. I've partitioned the 750 GB HDD with 500 GB for Mac OS and 250 GB for Windows. The system reboots and starts to install Windows 7. Then it pops up an error:
"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.
Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step."
Of course, I can't eject the Windows setup DVD because the eject button doesn't work so I can insert the Windows Support Software that I downloaded from Apple. So, I copied the Windows Support Software to a USB drive.
Once I get to this point, I can browse to the USB drive and I get the following file tree:
Drivers
     Apple
          x64
     Asix
     Atheros
     ATI
     Broadcom
     Cirrus
     IDT SigmaTel
     Intel
          Chipset
               All
               ia64
               Lang
                    Chip
                         (various languages)
               WIN7
               x64
     Marvel
     NVidia
          NVidiaChipset32
               Ethernet
                    NAM
               HDAudio
               SMBUS
               SMU
          NVidiaChipset64
               Ethernet
                    NAM
               HDAudio
               SMBUS
               SMU
          Win7_32
          Win7_64
     RealTek
The only directory that the installer recognizes as having valid drivers is the Intel > Chipset > WIN7. When I select all of the drivers listed, the installer acts like it's installing something but then it stops saying that new devices were not found. I can't get past this point. The Windows 7 installer will not continue. If I select any of the other directories, I get the message "No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK."
Any thoughts? Admittedly, this is the my first experience dealing with Mac OS and I'm completely out of my league. However, this is a Windows installation issue and I'm getting hung up on device drivers. Usually in the PC world, I can easily go to the manufacturer's website and just download the drivers I need directly.
...Mel
Sr. Systems Administrator - Windows, SharePoint

valid Windows 7 DVD burned from an .iso.
Usually burned ISO to DVD only works when burn speed is set to slowest.
Otherwise there are a number of problems with the install failing to do proper install, sometimes not even booting to start the install. Trouble is from using Apple Disk Utility. Burned in Windows, the ISO will be fine. Using Disk Utility at slowest has become "try reburn again at reduced speed."
You can use mouse on startup to eject DVDs but what you want is your drivers later after Windows is installed, and have them on USB flash or something.
you don't need any drivers except in a few cases (MacBook Air that lacks DVD and uses USB-DVDs)
Product support page is best place to start with every device and product.
www.apple.com/support/bootcamp
has manual pdf, faq, how to, support articles

Node text not found in SPRO

Hi All,
In SPRO transaction Time Management-->Web Applications->leave request(new)-> node text not found
I am not able to find all the three subnodes under the node leave request (new)
It is displayed as node text not found .whenever we execute these nodes it gives out an error as "there are no executable transactions assigned to this node".
These nodes are available in the development server but not available on test server.we have already activated the BC sets through SCPR20 and found the activation log successful for all EA-IMG, EA-AKH,EA-MENU.
Also activated the switch EA-HR.and ours is not an upgraded system(.4.7)
Please Help to the earliest possible as it is very urgent for us.
Points guaranteed.
Regards,
Jyothi.R

Hi Julian
Did you check whether all the upgrade program ran successfully? Also can you please let me know when exactly you get the message ?
Thanks
Debraj Roy

Node not found in SPRO IMG

Hi All,
In SPRO transaction Time Management-->Web Applications->leave request(new)-> node text not found
I am not able to find all the three subnodes under the node leave request (new)
It is displayed as node text not found .whenever we execute these nodes it gives out an error as "there are no executable transactions assigned to this node".
These nodes are available in the development server but not available on test server.we have already activated the BC sets through SCPR20 and found the activation log successful for all EA-IMG, EA-AKH,EA-MENU.
Also activated the switch EA-HR.and ours is not an upgraded system(.4.7)
Please Help to the earliest possible as it is very urgent for us.
Regards,
Jyothi.R

Hi, If the client where you have the problem has been copied from a different one, it may be a problem with the translation of texts:
Check this note :
Texts of hierarchy enhancements not transported
SAP Note Number: 204433
Symptom
Enhancements were added to a hierarchy (for example area menu) whose language is not the original language of the hierarchy. In the system in which the enhancements were added, all entries are displayed correctly. After a transport to a different system, the texts of the added enhancements are missing in this system. In the display or maintenance of the corresponding hierarchy the message 'Node text not found' is issued. In the Easy Access no message at all is displayed.
Additional key words
Area menus, enhancements, transport, IMG
Cause and prerequisites
Due to a program error, the texts of a hierarchy are only transported in the original language even if enhancements were made in other languages.
Solution
Implement the attached correction.
Regards
Jose Luis Valverde

NEW SLAVE HD NOT FOUND

Similar Messages

Maybe you are looking for