New software and now apps wont work.

Hey guys,
I have the iphone 4 and just updated my phone to the newest software. The download went fine but I realized a little while later that the apps that I have purchased won't open. I replugged it into my computer and syncd it again, but that did not help. When an app such as Facebook or Twitter is clicked on it looks likes it going to open but then just closes. Any suggestions?
Thanks.

Try the basics from the manual ;  restart, reset, restore

Similar Messages

  • I updagrade my iphone software and my apps wont work now

    Please iPhone World help meeee!  I update my iphone last night on my itunes, and now my apps wont work... by the way i lost my contacts, is it anyway i can get that back?

    i update to ios5 without any problem ! anyway ,
    re install ios5 without restoring , then re plugged it and make restore ,
    if not work u had to install all again .
    by the way, is there any error shown when try open app ?

  • Upgraded to new software version - now phone wont work

    i use vista - i plugged my phone in today (whihc isnt jailbroken) - it asked to download the new software and install - when trying to install - it wanted the mobile device recovery drivers - i have tried everything sugguested - manually selecting the drivers from common files - also completely reinstalling itunes.
    this is a business phone and is now unusable
    please help

    Hi miller5280
    Can you please explain the steps you took to "activate" your phone again?
    I am having this problem:
    1) after upgrade to the new software, phone was stuck in recovery mode (usb-itunes picture). Not jailbroken either.
    2) have done the "reset" i.e. off button & home button together
    2) I reinstalled itunes many times
    3) switch usb port many times
    4) de-auth / re-auth many times as well as purchased / download free apps (however, unable to sync due to itunes not recognizing the phone)
    5) BUT it still won't restore (error codes such as 13, 14 0r 1604)
    Can you or any here help me?? Can't use the phone at all. Very frustrating.....
    Tks

  • Downloaded updated software and now ipod wont work... help please

    Hello
    I downloaded the software and now my ipod touch will not work.  It has the itunes logo and the usb cable on the screen and nothing works. I have held down the top right button and the center button and the apple logo comes up, screen goes black and then the itunes and cable pictures are back on the screen
    Has this happened to anyone and if so how in the world did you fix it! Please help
    Thank you!

    thats the only option at this point...connect to itunes and complete the steps you are asked

  • Migration to new mac and now compressor wont work

    after a migration - new 6 core - my final cut studio (2) - doesn't all work. final cut works, but compressor tells me to restart or verify that my instillation is correct. DVD studio doesn't work either....
    help!!!
    thanks
    MR C

    David is spot on. Follow his advice.
    You need to understand that if you were running a G5 - a PowerPC chip computer - and migrate to an Intel chipped computer, the binary code to run the program on the new computer will not be present. Your G5's FCS installation doesn't have any intel code on it. FCS requires intel specific code on intel machines.
    Also, you will need FCP v5.1 or higher to run on the intel machine. v5.0 or lower is not supported.
    Heck, even migrating pro apps between machines on the same processor can be problematic due to the specificity of the chips and how FCS stashes system files. Sometimes they are not copied over or the frameworks are the wrong one for the processor or version of OSX.
    Best practice is to always do a fresh installation from the disks (or disk images) then use software updater to bring it up to the current update.
    x

  • I just updated to the new software and now my app Store is not working It is just a white blank page

    I just updated the new software and now my app store will not work I have shut it down and opened up again and nothing just a blank white page ?

    I'm having a similar problem.
    New iPad with iOS6 just downloaded.
    I cannot purchase any new items from the new Apple Store now!
    It keeps asking me to fill in CC details, asking for security number, but stays red when i fill in the 3 numerals and when I click done I get a Time Out message.
    This is not good Apple!!
    Looks as if I will have to use my iPad One to purchase from the Apple Store.

  • I updated my computer to the new software and now the iPhoto has a circle with a line through it.  When I try to update, it pops up to say "These apps cannot be accepted by your apple id". Then will say "update unavailable with this apple id" how do i fix

    I updated my computer to the new software and now the iPhoto has a circle with a line through it.  When I first try to open it the pop us says: "You can't use this version of the application "iPhoto" with this version of OS X. Version: 9.2.1"  When I try to update, it pops up to say "These apps cannot be accepted by your apple id - These apps were already assigned to another Apple ID and they will be available in that Apple ID's purchases list.  If you don't have access to that Apple ID and want to receive future updates, you will need to purchase the application".  I checked and there is nothing under the "purchases" in my App store.  Then will say "update unavailable with this apple id - This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canceled." Then the third pop up says "We could not complete your request. There was an error in the App Store.  Please try again".  Just want to know how do to fix.

    After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
    b0n0b0
    Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
    Mar 15, 2014 9:05 AM (in response to Terence Devlin)
    Got it! Thanx.  What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

  • I just downloaded new software and now some of my apps won't open

    i have downloaded the new software and now some of my apps won't open. Can anyone help

    some apps need to be updated by the developer to work with the new iOS version
    check app store app for updates or arm yourself with patience it's pretty common for that to happen with major iOS updates

  • The new itunes update will not install properly and now itunes wont work at all

    k, so I tried installing the new update for itunes and now it wont work at all. it says that the mobile device isnt installed. i have uninstalled and reinstalled itunes 4 times now.

    My issue is it wont even reinstall onto my computer
    Yes I'm aware of that. The procedures are also for trying in cases where iTunes can't be reinstalled due to a "Could not start Apple Mobile Device service" message.
    If you're getting a different error message relating to the Apple Mobile Device Service (or Apple Mobile Device Support) when you try to reinstall iTunes, post back to let us know what that error message says. (Precise text, please.)

  • My itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens

    my itunes wont work I just installed some new update and now it wont even come up, I click the Itunes icon and nothing happens. Please help me I've tried uninstalling it and downloading it again but that didnt help :/

    DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

  • Updated iphone to iso6 and now camera wont work, any suggestions

    updated iphone to the new software, and now my camera wont work. When you click on it it stays blank.

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • New iMac and iDVD just wont work!

    All,
    Just got a new iMac and iDVD just wont work, from creating a new project, or opening an old one, or trying to share from iMovie (HD)
    If I try to do anything nothing seems to happen and when I close the program a window does appear and from there it just freezes.
    Have deleted and reinstalled iDVD, repaired permissions, all up to date in my on software updates...any ideas?
    Thanks
    Zara

    *Not knowing the origin to Your problem - General approach when in trouble is as follows.*
    • Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
    iDVD pref file resides.
    Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
    and is named. com.apple.iDVD.plist
    While iDVD is NOT RUNNING - move this file out to desk-top.
    Now restart iDVD.
    • Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
    • Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
    • Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
    • Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
    • Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
    • iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
    Macintosh HD/Library/Application Support/iDVD/Themes/ zzzzzzzzzz
    or
    Macintosh HD/Users/Your log-in//Library/Application Support/iDVD/Installed Themes/ zzzzzzzzzz
    • Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
    iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
    Last resort. from Craig. Solved the problem!! Finally!!
    I deleted every iDVD application and folder from my boot drive,
    emptied the trash and then installed iDVD 08 using the customize option
    and I am up and running.
    If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
    iDVD updated ?
    Apple Codec updated ?
    Start a New Clean project - or delete project assets
    No of Colors - must be set to millions
    EdinSF writes that, The 10.6.3 update with an Open GL fix seems to have taken care of the problem.
    Yours Bengt W

  • I recently updated my MacBook Pro to the new software, and now my iMessage and my FaceTime are not connected with my computer. How do I get them to match so that I would be able to use my cellphone number?

    I recently updated my MacBook Pro to the new software, and now my iMessage and my FaceTime are not connected with my phone number like it is supposed to be. How do I get them to match so that I would be able to use my cellphone number on my notebook?

    To reset any OS X program just go to the folder and trash the affected files.
    Open a new Finder Window
    Click "Go" in the above status bar
    Click and HOLD the "option/alt" key and you will see "Library" now show in the above list
    Click Library while still holding the option/alt key and a new window will open with all of your system files
    Go to the preference file (NOT Preference Panes)
    Locate a file named <com.apple.FaceTime.bag.plist>
    Locate another file named <com.apple.FaceTime.plist>
    Locate the file <com.apple.iMessage.bag.plist>
    Drag the files to the trash
    Delete the trash
    Close FaceTime and iMessage if not already closed
    Relaunch FaceTime and iMessage from Applications folder
    This should reset the program back to default. You will have to put your information back into the program but it should work.
    Good Luck.

  • I accdently formated my shuffle and now it wont work what do i do?

    I accdently formated my shuffle and now it wont work what do i do?
    That and when I plug the shuffle in to the comp iTunes doesn't reconize that the shuffle is pluged in.
    it has updated a-few times. and when iTunes sees that the shuffle is in the comp it tells me that the songs are on the shuffle.............but when i unplug it and put my headphones in no music comes out of it!
    so what am i to do
    shuffle 512MB Windows XP

    I'm having the same problem! My good-for-nothing brother has formatted iPod shuffle through "My Computer" and now it won't work. Neither iTunes nor iPod software updater recognise the thing. To be honest, neither application even start when the shuffle is plugged in! And now I've just read that apple says you "SHOULD NOT FORMAT" shuffle. What am I to do? Have I lost my iPod for ever?

  • I updated my iphone to the ios6 and now it wont work.

    i updated my iphone to the ios6... and now it wont work at all.
    it wont even turn on, it keeps going back and forth between the black screen and then the apple mark pops up for a few seconds, and then turns back to the black screen again... and that just keeps going on...
    someone please help...

    Seems like ios6 isn't any good for any of their devices. I have an iPhone 4 and recently updated to ios6 and have had all the wifi problems and apps getting hung up on load screens. Restore is your best bet and downgrade if you can back to ios 5.1. If restore doesn't help with a fresh install of ios6 then call every Apple support number you can find and be heard like the 1,000s of other people like us with ios6 problems demanding support. There doesn't seem to be any quick fixes for ios6 other than an update from Apple.
    <Edited By Host>

Maybe you are looking for