New Soundtrack Pro and Final Cut Pro Updates...

There's new updates for Soundtrack Pro and Final Cut Pro on Software Update.
They seem to have fixed the problem I was having with one of my giant old projects. I used to have to open one of the audio projects before my multitrack project would open, but now it opens just fine. So far so good!

Hi Collings,
Looks like there are two threads about the recent FCP & STP updates, so I'm posting my findings here, too.
I just found another thing that appears to be fixed in STP 1.0.2:
Batch normalize is working:
I have a bunch of aif files that I want to normalize. I opened one in the waveform editor, applied process->normalize (level=0dB), then selected File->Save as Applescript--this creates an Applescript droplet. Then I can then grab a whole bunch of audio files and drop them all onto this droplet and they all get normalized correctly. This is a huge timesaver for me. Before this update, using this approach to batch-normalize a set of files seemed to deliver unpredictable results, but I just ran a whole set of files through, and they all played back with a peak level of 0dB (and no clipping).
Here are the other things that I've noticed so far with STP 1.0.2:
Automation:
-In STP 1.0.1, Automation was not applied correctly on project sample rates that were not supported by the hardware (e.g. play a 96K project on a laptop built-in 48K audio interface and the automation was late by 2X) -- this is fixed!!! YAY!
-STP 1.0.1 did not handle long automation ramps across long periods of silence (it would sometimes cause a glitch at the start of the clip right after the automation ramp--there is even a support article about this)--it seems like they fixed this one, too.
Sample rate switching:
-I see an option in general preferences to allow me to disable the "Switch hardware sample rate to match document", and with this disabled, I no longer get audible clicks from my audio interface when I switch tabs. Plus, switching tabs seems faster to me.
Realtime effects and automation in audio file projects:
-They've added a warning to inform folks about the need to bounce realtime effects and automation to an action--if you are in an audio file project with realtime effects that have not been bounced to an action and you try to save, you get a warning message.
Has anyone else noticed any other fixes or changes in this update?

Similar Messages

Retina mac book pro and Final Cut Pro x

retina mac book pro and Final Cut Pro x is crashing when I use any keying filter. It doesn't should color wheels or grey scale sliders and when I click where they should be they crash. Any ideas?

I actually trashed the prefs three times before I reinstalled the whole app. Here is the screen shot. Notice under color selection sub menu no color wheel. Everytime I click in that general area, it crashes.

I need to record two camera interview shoots and turn the video around quickly. What is the best solution using a MacBook Pro and final cut pro?

I need to record two camera interview shoots and turn the video around quickly. What is the best solution using a MacBook Pro and final cut pro?

Try reimporting all your media: file>>import>>reimport>>continue

MacBook Pro and Final Cut Pro X

I'm a new MacBook Pro owner and was just wondering if I can install Final Cut Pro X on a February 2008 MacBook Pro?

as long as it meets the minimum requirements:
Mac computer with an Intel Core 2 Duo processor or better.
2GB of RAM (4GB of RAM recommended).
OpenCL-capable graphics card or
Intel HD Graphics 3000 or later.
256MB of VRAM (512MB of VRAM recommended).
Display with 1280-by-768 resolution or higher.
OS X v10.6.8 or OS X v10.7.4 or later (OS X v10.7.4 or later for broadcast monitoring).
2.4GB of disk space.
http://www.apple.com/finalcutpro/specs/

Mac pro and Final Cut pro

I am trying to install Final Cut Pro onto my new Mac Pro. I keep getting the message "Re: This software requires certain hardware or software which is missing. * Power Macintosh G4/350 megahertz (MHZ) or faster * AGP graphics car.
My system is a Mac Pro 3,1 Quad Core Intel Xeon 2.8GHz with a ATI Radeon HD 2600. Why am I having this problem?

If you have a previous version you can buy an upgrade. The upgrade only requires the original serial number. What version do you have? The upgrade isn't viable for all versions. I think only 4.5 on up. Contact Apple...
Shane

Which Mac Pro to buy for Logic Pro and Final Cut Pro X?

Hi, I'm considering to buy a Mac Pro for my personal studio. I have 2 choices in my mind: 1st one is the "Quad-core (one 3.2GHz Quad-Core Intel Xeon) with 6GB RAM", and the 2nd one is "12-core (Two 2.4GHz 6-Core Intel Xeon) with 12GB RAM". I'll be mainly using Logic Pro 9 and hardcore video editing in Final Cut Pro X. I know the fact that having higher GHz than more cores may benefit you at some point, and only those software applications that are well-written for using multiple cores will be able to utilize the power of 12-core. So, I need to know that are Logic and FCPX are such apps? Are they able to utilize the power of 12-cores or a Quad-core with more GHz will be better? I'm looking for fast operation and smoother workflow, and I'll also be using this computer for a very long time (so, its a major investment!).
So, the ultimate verdict is to whether to go for more clockspeed or more cores? Money is not the problem here, and I will add more RAMs, SSD according to the need later after couple of months, but considering nothing else I need you to compare between these two machines! If the 12-core machine is even 1% faster I'll go for it, but I don't want to end up spending more money on the machine with will have less power and utility.
Regards.

6 core 3.33 1st choice
8 core 2.93 or higher

13 " Macbook Pro and Final Cut Pro X

Hi there,
I have a 13 " macbook pro 7,1. I meet all the requirements for the Final Cut Pro X editing software. My questions are:
1. Will it work fine although I have only barely met the requirements (will it be too slow or worth running on the computer?)
2. Looking on my graphics information my computer says its "pixel depth" is 32-bit. In the advertisement on the software it mentions something about 64-bit
Any help would be appreciated.

You should also ask this in the MacBook Pro and the Final Cut Pro X forums. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/professional_applications/final_cut_pro_ x

Recommendations? Macbook Pro and Final Cut Pro

Trying to decide what system I want to buy to use Final Cut Pro on. I'm looking at the 15" model, so my question really is what upgrades would run Final Cut Pro 5, or 7 the best.
I own a copy of 5. I am deciding on if I should buy 7..

The things that will make the most difference are:
1. RAM - max this out or put in as much as you can afford
2. Hard drive - get the largest capacity 7200rpm drive possible

Macbook pro and final cut pro 5.0.4

Am looking to get a macbook pro for occasional editing on the move.
Currently running 5.0.4 quite happily on my main edit suite.
Should there be any problems with running 5.0.4 on the macbook pro.
I know there are things in 6.x that are good but everything is fine as it is.
Pete Snowdon

Again, 5.0.4 is not compatible with Intel Macs, so performance and compatibility are real issues.
5.1.x was the first to this, but isn't available any longer.
Upgrades from qualifying products range from $499.00 to $699.00

Canon EOS 5D Mark II viedos and Final Cut Pro

Photographer Vincent Laforet have posted the original clips made with the new Canon EOS 5D Mark II. This camera could be record movies 1920x1080p in H.264.
The clips could be downloaded here: http://blog.vincentlaforet.com/2008/09/26/original-raw-clips-from-reverie-now-av ailable-for-download/
I've tested this video on two MacBook Pro, a 15" and a 17" HD, all with 4GB of RAM and Intel Core 2 Duo 2.5 GHz.
The video is flicking every 5 seconds, on Quicktime Pro and Final Cut Pro 6.
I've created a Sequence in HDTV 30fps and imported the clips. The next step was to import the clips. FCP asked me to change the video and audio settings of the timeline with the settings of the MKII. The video is flicking every 5 seconds.
I can't imagine what computer I should use.
I've seen the Xserve in the making of and I think that Vincent have used its to edit the footage with FCP. A last model of professional laptop from Apple is unable to do this.

Hey Guys:
According to a recent analysis by the Norwegian Broadcasting Corporation, the h264 video captured in camera is one I-frame for each 15 P-frame. No B-frames. You can read the full report here:
http://nrkbeta.no/video-test-clips-from-canon-5d-mark-ii-gets-analyzed/#comment- 58420
I've posted a short video tutorial explaining the process to convert the source h264 files to Apple ProRes 422. IMHO, converting to the i-frame Apple ProRes 422 codec as early in the post process as possible will save time and headaches down the line. You can check out the video tutorial here:
www.petersalvia.wordpress.com.
Theoretically, by converting to ProRes you could work with the footage on a PC if you install the ProRes Decoder for Windows. That decoder is available here:
http://www.apple.com/support/downloads/appleproresquicktimedecoder10forwindows.h tml
Hope this helps!
proactively • peter

Soundtrack Pro and Final Cut Server....can you check-in/check-out?

Hello!
Just curious how the workflow is with Soundtrack Pro and Final Cut Server. We haven't used Soundtrack Pro, but have been thinking about it for Surround Sound projects.

You can check in anything into FCSvr, any type of project file or media file. Unlike checking in/out a Final Cut Pro project, with any other application, you'll need to check out the project file for that app, and manually check out all the media associated with it. Many folks will simply set up the STP, or Motion, or InDesign, or Illustrator project and it's associated media all into the same folder on their workstation. Then check in/out that folder as a "bundled asset". This makes a zip file in FCSvr that holds all of those needed files together. When you check it out, it's unzipped and places on your local workstation. When you check back in, FCSvr re-zips it and replaces the original on it's RAID storage drive.

I have a fairly new iMac wI now have iMovie events and Final Cut pro events that are duplicates. Does that mean that all my video is copied onto my hard dive twice?

If I have video in imovie and final cut pro X, does that mean there are two copies of the video, one for each piece of SW? If so, how do I get rid of the imovie events and keep only the Final Cut Pro X events (video)? I don't want multiple copies of the same video stored on the hard drive.

If you import to FCP directly from the Camera or from a camera archive, you would likely import choosing Optimized Files which would go to a FCP event that is in ProRes 422 codec. This would be in addition to your iMovie Event which would import using the Apple Intermediate Codec. So you would have two copies of the same information. An AIC copy and a larger ProRes copy.
However, if you use FILE/IMPORT/iMOVIE EVENT LIBRARY, FCP will not duplicate the event files from iMovie. It will treat them as referenced files, and will point to the iMovie Event files in the reference. So there is no duplication. You will be editing Apple Intermediate Codec files in FCP.
However, FCP will create Event folders. In addition to the reference information, these will contain thumbnail files that are compatible with FCP, stabilization and analysis files that are compatible with FCP, as well as any intermediate render files that are associated with the Event.
So in this case, there is no duplication of the large event files, but there is some duplication of the small thumbnail files.
I have several terabytes of iMovie Events, which are now all available in FCP. Believe me, I would know if they were duplicated because all my disks would be full.

HDC-SD9, iMovie 7.1.2, QuickTime 7.5, and Final Cut Pro

After I read the post, I tested it on my Mac. I can safely say that I can import videos from HDC-SD9 using iMovie and Final Cut Pro now.
Update to QuickTime 7.5 and iMovie 7.1.2 to make this camera work with the Mac.
It seems to be working with Final Cut Pro too.
source:
http://37prime.com/news/?p=160

That sounds promising! I will install the update tonight and let you know if the same goes for me!

Lion and Final Cut Pro X

Lion and Final Cut Pro X.
Anybody got it working? Final Cut Pro X crashes and system looks so slow, like it wold be 10 years old. All started after update to Lion.
Hey Apple, what's up?
I do a lot of video edits, but now it impossible to work with Final Cut Pro X at all. Too many crashes.
Every day I think more and more about return to Premiere Pro.
Lots of people waiting for updates.

Same problem, Lion totally stuffed everything up. (even though the problem first surfaced with Snow Leo - at least that time we could switch of automatic graphic switching as a work around)
Apple have replaced two logic boards so far along with memory and something else I don't know I am so fed up.
I Have not been able to use my computer for over a month now because of Apples incompetance with this issue.
I've wiped and reinstalled Lion three times now. Ran the computer with a clean new Lion install and only FCP installed. BSOD.
Two logic boards later as mentioned and three visits to Apple having to leave it with Apple for them to come up with "it's software related" as there finding - so this is my problem apparently. The joke of this being that before I left it with them this last time they ran a diagnostic with the specific purpose of rulling out software as a cause.
Apples new OS Lion makes Apple software not work on a Apple computer - and this is the consumers problem and not Apples?.
Come on Apple, Really?
You can do better than that.
Admit theres a problem, and replace our useless aluminium bricks if you cant work it out?

Mac Pro Dual Core (pre 2009) - Leopard to Snow Leopard and Final Cut Pro 7

I have a pre 2009 Mac Pro running Leopard and Final Cut Pro 6. My question is should I upgrade to Snow Leopard, and Final Cut Pro 7? Both, neither, just one of them... and in what order?
I am afraid of some of the issues people have been discussing (one website even said with a non intel based system neither updates can be done, but I have Intel Xeon processor)
Any help is highly appreciated. Thanks kindly

Your macpro will run Snow Leopard and FCut 7 just fine. There are plenty of "whats new in Final Cut Pro" tutorials out there to research and learn whether the new things are useful to you. Snow Leopard...plenty have had issues with it. As always, it's best to have a full mirror backup before you update to Snow Leopard so if you do have problems you can go back easily. I'd definitely move to 10.5.8 if not SLeopard. I have a PCIe card that won't work with SL so I'm holding off till I install a new card. There are still some incompatibilties known so you may want to check Apple's list.

New Soundtrack Pro and Final Cut Pro Updates...

Similar Messages

Maybe you are looking for