New SSD install Mavericks and apps
I am installing a Samsung Pro 840 ssd in my 2011 MBP 17" to replace the spinner. What is the best method for a clean install - clone the HD or install new apps?
A clean install is not a clone, but if your system is otherwise working properly, cloning to the SSD will have you up and running a lot faster, and with fewer issues of software licensing. Also, running the 10.9.2 combo updater can serve as a refresh of your system once the cloning is done. Finally, be sure to enable TRIM on the SSD.
Similar Messages
-
Since I uploaded the new OS X Mavericks the App Store, Messages, Notes, Calendar, Maps and Preview will not launch/open. In Finder cannot find my files. Most crucially cannot upgrade OS X Mavericks software. I had two apple ID's, the old one not used
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
I have a laptop (2010) with Lion OS and tried to install Mavericks and part way through the installation it quit and reverted back to Lion and the app store doesn't let me download Mavericks again. How can I resolve this?
Is your data backed up?
Are you running any non-Apple system optimization tools? -
I am attempting to update to the new os x mavericks and while completing the download it prompts me to choose a disk. I have chosen the only option I am provided and am then told that the update cannot be installed on "untitled 1" what am I supposed to do?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the installation again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting. -
Just erased my disk, whent to install Maverick and get : "Not available now" message since yesterday
Just erased my disk, whent to install Maverick and get : "Not available now" message since yesterday. Can someone help me revive my dead IMac!!
If you are selling or giving away the computer then follow these instructions:
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must
be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be sure
to opt for that.
Destination means a freshly erased external backup drive. Source means the internal startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See What to do with iCloud before selling your computer.
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list.
Click on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License. -
I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?
i tryed with download mavericks but finally its saying a error message like cant conect to istore like that its saying and every thing is clear like internet and other stuf i tryed with 3times no progress same error pls help.. i bought this lap for my bro with his apple id only we use it now he got a new mac book pro so he gave to me so i formated and use it i use my apple id is that problem come because of changing apple id ? pls eplainFirstly, what is the source of the 10.6.4 disc? Is it the original installation disc for your MacBook, or one 'borrowed' from another computer?
It isn't the retail version, because that's 10.6.3.
Assuming it's the correct disc (i.e. the one that shipped with your Mac), you need to boot from it again.
OK the language page.
From the installer screen, ignore the continue button, go to the menu bar and choose Disk Utility from the Utilities menu.
In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.).
Run Repair Disk. If that comes up as disk OK, click the partition tab. Select the partiton from the drop-down above the graphic; 1 partiton is all you need.
Go to the options button and ensure that the partition scheme is GUID and the file system to Mac OS Extended (Journalled). Name the partiton (usually Macintosh HD), click Apply.
When the Macintosh HD volume appears below the drive name, quit DU and see if you can then install.
If the screen after the language screen doesn't show the menu bar, it may be necessary to use another Mac to do the job with the MB in Firewire Target Disc Mode. If it won't boot in TDM, or the MB doesn't have FireWire then it's getting very difficult. -
SSD: for OS and apps, or for samples and audio?
I'm thinking about adding a 256 gig solid state drive; I currently have two 1TB drives. I tend to use large sample-based instruments - Play, Ivory, Vienna, Kontakt, Omnisphere, etc. - but not particularly great track counts. If I used it as the startup disk, 256 gigs would be way more than enough (because audio and video files are on other disks.) As a sample disk it would hold my most demanding and most often used libraries.
What would be the most efficient use of that SSD speed - OS and apps, or streaming samples and audio?Thanks for the recommendation on size. I found a great answer to my question about file locations at:
http://discussions.apple.com/message.jspa?messageID=12293000#12293000
Using the advanced Options (control click the active admin account) in the accounts pane in System Preferences, one can specify a new location for the home folder. Very practical and way easier than trying to go into all the app's libraries to tell them where their files are.
Now I can just copy my home folder to the internal drive, and delete it on the SSD. After a restart, this new location will be recognized as the correct home folder. -
I recently installed Maverick and now my Mac is running very slow
i recently installed Maverick and now i am running very slow.
Please download, install and run Etrecheck.
Etrecheck was developed as a simple Mac diagnostic tool by a regular Apple Support forum user and contributor named Etresoft.
Etrecheck is a small, unobstrusive app that compiles a snapshot of your entire Mac hardware system and installed software.
http://www.etresoft.com/etrecheck
Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we can all help with your Mac performance issues. -
Tried to install maverick but app store had 1 update for mountain lion so I installed it.it didn't restarted so I did n then it started installing mountain lion.
I had 1 update for mountain lion so I did it said restart required but I got stuck in the middle of the process n yhen it said install mountain lion again.
Now what to do help me pleaseiCloud isn't syncing them on your phone. You simply added the email account to your phone and enabled calendar and notes syncing with the email provider, and the calendar and notes appear in the calendar and notes apps on your phone. You can do this with Gmail, Yahoo and other IMAP account. iCloud email is just another IMAP account, but syncs notes with Apple's iCloud server just as Gmail syncs notes and calendars with Google's server.
iCloud didnt' set up a non-iCloud account on your Mac. When you check Mail in System Preferences>iCloud, it only creates an iCloud email account. You can also add other email accounts to your Mac by going to System Preferences>Mail,Contacts,Calendars and clicking on the "+" sign on the bottom of the left sidebar. If you added these other email accounts to your Mac before you upgraded to Mountain Lion, these were simply maintained on your Mac after you upgraded. -
I'm trying to install Mavericks and got this message: You need 4.94 GB of available space to download OS X Mavericks. Remove items from your startup disk to increase available space. How do I do this?
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Look though other Apple Mail folders like the junk mail and delete the mail that is in there. Look through your sent items folders and see there is any mail in there that can be deieted.
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Other things you can do to gain space.
Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
This app will help you locate files that you can move/archive and/or delete from your system.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck! -
Hi there, hoping for help pls. I just installed mavericks and now garageband old version won't start because the BFD folder is invalid.
Click Software Update from your Apple menu drop down menu.
If there's nothing available from Software Update, you may need to purchaase the newest GB version 10.0.2 from the App Store. -
I tried to install maverick and now my keyboard keys F10,F11, 7,8,9 on the number pad don't work on my iMac. How do I resolve this?
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
Hello! I have a printer,Canon MP250 and I bought a new MacBookPro with Maverick and I cannot work this printer with the driver that came with the printer and I've tried to find an update but with no success, can you help me?
Thanks!!you can try resetting the network settings in settings or you can try doing a reset - hold down the home/power button together until you see the apple logo and then release. Then wait for the phone to boot back up. You won't lose any data.
-
Have just installed Mavericks and restarted the MacBook Pro. That was 3 hours ago and after logging in, I got my wallpaper and dock, but none of my desktop icons, just the spinning coloured wheel. It's been like that for 2 hours. Is this normal? What should I do, please?
I tried holding the on/off switch down to make it shut down, but when I turned it back on again, the same thing happened and none of the keys etc makes any difference.
HELP!!!! Please.No, what you're experiencing is not normal.
Try booting whilst holding down the Shift key - this will allow you to boot into Safe Mode, disabling third-party kernel extensions, etc. Your Mac will be slow to boot and will operate sluggishly. That's normal. If you can get in using Safe Mode then you have some start-up item that doesn't play well with Mavericks.
Call back,
Clinton -
I've just installed Maverick and now can't open iphoto. I have 9.2.1 currently installed. Please help - am terrified I've lost my photos as they weren't all backed up.
Pogs78,
first things first — buy an external drive to use as a Time Machine backup destination and make a back up. That way, you won’t lose anything which is currently on your MacBook Pro.
Maybe you are looking for
-
How can I get my iPhone 4 to Calibrate in the Nike/ipod App?
I have tried the direction from my phone by walking to calibrate, powered my phone off, did a full reboot and so far nothing has worked for me - called Apple and they want me to bring my phone in for service and buy an Apple Care plan but I am ona fi
-
Same line Item but two differentreceiving IDOCS
Folks I am new to SAP PI and seeking your help in the following scenario legacy -> SAP PI -> branched to two idocs in ECC The scenario is that a fixed length flat file coming from Legacy wil contain some line items but each line will be a separate i
-
how can we block someone from reloading a page thousands of times as a denial of service attack? we have wls 5.1 sp8. basically, if you load a jsp, and hold down f5 in IE, it will reload it hundreds of times, killing performance. I noticed that most
-
Diabolical upload speed/customer service issues
Before Xmas I decided to switch to BT from Sky as I was hopeful that I would soon be able to get BT Infinity as my exchange (Radlett) was enabled last year. However the next day I phoned back as I had forgotten to check that the service included a st
-
Dynamically change column heading without Dashboard Prompt
Hi All, My requirement is change the column heading dynamically in a report. I have achieved this through setting the presentation variable to the dashboard prompt. I have 5 columns in the dashboard prompt. Out of these 5 columns, I want to use only