New SSM-IPS40 show 50% CPU with no traffic
We're getting ready to deploy 2 ASA 5585s with SSM-IPS40 modules. IDM reports 8 cpus at 100% utilization for a total of 50% cpu utilization. Is IDM reporting this in error? I'm not finding a way to check on the CLI. There is no traffic traversing these devices at the moment.
Thanks in advance for any help.
Dennis
As from E3 engine updates, the IPS uses a different algorithm for managing its idle
time,and spends more time polling for packets to reduce latency. The E3 changes included a
fix to a problem with high latency during low traffic loads. The fix was to have sensorApp
check the packet buffers on the driver more often. So the packet could be pulled off the
driver queue quicker for analysis instead of waiting for the driver to fill the queue
before passing it to sensorApp. This increased checking caused a corresponding increase in
cpu usage.
The CPU Utilization measurement can/will be high, due to the change made in
the E3 engine, polling the sensing interfaces for more data. This is OK as if/when the
sensorApp process requires additional CPU time, the amount the polling is using is
dynamically scaled back to useful for determining actual sensor load.
So do not worry for the HIGH CPU but check the Processing load percentage on the IPS.
Please post if there are still unanswered questions.
Sachin
Similar Messages
-
I transfered music from my ipod to a new itunes library (new PC). The music plays in itunes but when I sync my ipod and try to drag songs from the itunes library to the ipod it wont load. It shows a circle with aline through it.
Have you selected manually manage music?
-
My old PC broke, it was the only pc my classic was sync with. New PC only shows 1 song (recent purchase) so am worried about syncing to new PC in case I lose the list on my iPod, which is still intacted. How can I transfer my list to new PC?
I'm having a similar problem, but I do have the key and is not working anyway.
My old pc was running on windows 7 and my new one is an apple running on Lion.
My phone is an Iphone IV and I can see all the bookmarks there.
In order to sync, what I did was click on the "I don't have the device with me", I entered the key that was provided and the process finish ok. It says congratulations, etc, etc.
But the bookmarks are not there, I tried merging data and replacing data on this computer options but is the same.
Any suggestions? -
I have a L7680 All in with two new print heads but the new cyan/magenta shows yellow monitor status. Ink status, cyan more than 50% and magenta is a 25% w/no low ink warnings... Just ran a clean print head again, print out looks good now but the status of the new cyan/magenta shows yellow monitor status. Is it time to buy another..When I purchased this printer it had to be replaced 3 times because of problems... Just a lemon?
thx for your help in advance...
JimCould you share a link to the page?
Seeing it in context and in our browsers is much easier to debug.
If not, make sure to run the validator here The W3C Markup Validation Service and clear out any problems. HTML errors, especially structural ones, will cause all kinds of display problems in various browsers/versions/platforms. -
I downloaded the new operating system and now the Bluetooth in the car does not play my music. The music on the phone show the cloud and the red arrow pointing downwards. How do I download all the music again to my phone please?
I have an ITunes account. I got it when I got my IPOD. I've thought about upgrading, but I didn't see any reason to buy a newer IPOD because they all come with so much stuff I don't want/need. I don't have my current IPOD filled yet and I really don't need an IPOD Touch that has capabilities that my Droid already has. I don't need to be concerned with documents, mail, attaching to Facebook or playing games. I can do all that on my phone. I just want to maintain my music between 3 devices.
So now that I see it is not to my benefit to have this product---can you point me in the direction to cancel this? And how do I get my music back? Will it show up once I cancel my account? -
I have a problem with my new ipad air 64g with cellular. When I off my ipad for a long period of time ( around 2 hours), my ipad air freeze. Nothing is showing on screen with any button except by pressing reboot (home on/off button). Anyone out there can help. Thanks.
I have a 64GB iPad Air WiFi+Cellular (Verizon), and I don't see the issues you are describing. First I would suggest that you update your iPad to the newest iOS update. If that doesn't help, then you may want to schedule an appointment at an Apple Genius Bar. If you go this route, I suggest that you let the iPad sleep for long enough for the problem to arise before you go to your appointment.
-
the new ipad shows no copys with two weeks, so now can not get in
Has he tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds after which the Apple logo should appear - he won't lose any content, it's the iPad equivalent of a reboot.
-
just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
OS10.6.8, Firefox 24.0
The new Yahoo mail shows no graphics using Firefox 24.0 - just identical rectangles where new icons should be.\. However, the new Yahoo mail displays correctly in Safari and Chrome. I believe this has to to with the settings for Javascript. Those settings aren.t easy to access in the most recent Firefox 24.0 version. Help me, please.The settings for Javascript are either on or off, Fireefox 24 doesn't give you a option to turn off Javascript, unless you installed something like NoScript extension (or some other Javascipt blocking add-on)
If NoScript, then you need to use the View > Toolbars > Customize and drag the NoScript "Temp Allow All" button to the toolbar area to enable all enabled scripts (including Javascript) on that web page.
Under the Firefox Help menu is a option to restart with add-ons disabled to see if something you might have installed is causing your problem.
Reinstall Firefox or create another user account and run Firefox there to try to localize your issue.
I'm having no problem here on 10.6.8 in Firefox, Chrome or Safari, Yahoo Mail works perfectly. -
I am trying to install an app in my iphone. When I click Install, my old gmail account comes up for verification and it asks for my password etc. I dont use this account anymore and have a new gmail account that is associated with my apple account. How can I get the new gmail to default when I am trying to install apps?
Did you create a NEW Apple ID or did you change the email address for your OLD Apple ID? This will affect how you update apps in the future.
Anyway, go to Settings/iTunes&App Stores, log out, then log in with the new ID. -
The browser sometimes show strange squares with like appears to be "TV noise" [http://imageshack.us/photo/my-images/259/image000l.png/ Image of one of the squares]
Does this still happen if you disable hardware acceleration?
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers -
Crash Reporter Shows My iMac With A Different Processor (CPU).
Why does the Crash Reporter show my CPU as being AMD 64 instead of Intel on my 2009, 24" iMac?
I asked this about six hours ago, and my question was deleted without even a computer generated notice to my email saying anything like "It's not important enough".Your original post is here: <br />
https://support.mozilla.com/en-US/questions/793079 -
Linux VM shows continous CPU load
Hello,
I have a cluster of Windows 2012 R2 - Hyper-V enabled.
I have installed a Centos 6.5 64bit VM on it.
Now, the problem is whenever I enable dynamic memory for that VM the CPU load is showing 1.0 all the time, even when the VM is in idle state. As soon as I disable dynamic memory for the VM and check again then the load is normal around 0.10
Please suggest a way so that the VM shows normal CPU load whenever dynamic memory is enabled.
Please visit this link
containing the screenshot for the dynamic memory enabled scenario.
Thanks.
Hussain~
~
. . . I guess I will have it triaged next week when our team returns. Please hold until then.
~
~
==
Leverage the newly exported functionality to bring memory online
without involving user level code.
Signed-off-by: K. Y. Srinivasan
drivers/hv/hv_balloon.c | 20 +++-----------------
1 files changed, 3 insertions(+), 17 deletions(-)
diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c
index 2d094cf..c2eec17 100644
--- a/drivers/hv/hv_balloon.c
+++ b/drivers/hv/hv_balloon.c
@@ -606,12 +598,10 @@ static void hv_mem_hot_add(unsigned long start, unsigned long size,
- * Wait for the memory block to be onlined.
- * Since the hot add has succeeded, it is ok to
- * proceed even if the pages in the hot added region
- * have not been "onlined" within the allowed time.
+ * Before proceeding to hot add the next segment,
+ * online the segment that has been hot added.
- wait_for_completion_timeout(&dm_device.ol_waitevent, 5*HZ);
+ online_memory_block(start_pfn);
==
+
==
> On 07/24/2013 02:29 PM, K. Y. Srinivasan wrote:
> > /*
> > - * Wait for the memory block to be onlined.
> > - * Since the hot add has succeeded, it is ok to
> > - * proceed even if the pages in the hot added region
> > - * have not been "onlined" within the allowed time.
> > + * Before proceeding to hot add the next segment,
> > + * online the segment that has been hot added.
> > */
> > - wait_for_completion_timeout(&dm_device.ol_waitevent,
> 5*HZ);
> > + online_memory_block(start_pfn);
>
> Ahhhhh.... You've got a timeout in the code in order to tell the
> hypervisor that you were successfully able to add the memory? The
> userspace addition code probably wasn't running within this timeout
> period. right?
As I have always said, the onlining would not occur within a specified amount
of time (under some conditions). The timeout here is to ensure that we are able
to online the memory before attempting to hot-add more memory. With the ability
to online memory from within the kernel, we don't need this timeout and the code is
much more predictable.
Regards,
K. Y
==
~
~
----- Original Message -----
From: "Victor Miasnikov"
To: "Dan Carpenter"; "K. Y. Srinivasan" ; <[email protected]>
Cc: "Greg KH" ; <[email protected]>; <olaf (at) aepfle.de>; ""Andy Whitcroft"" <apw (at) canonical.com>;
<jasowang (at) redhat.com>
Sent: Thursday, January 09, 2014 2:18 PM
Subject: RE: [PATCH 2/2] Drivers: hv: balloon: Online the hot-added memory "in context" Re: [PATCH 1/1] Drivers: hv:
Implement the file copy service
Hi!
But I ( and other Hyper-V sysadmin) see non-Ok ( in "political correct" terminalogy) results with "hv: balloon: Online
the hot-added memory" in "user space"
Best regards, Victor Miasnikov
Blog: http://vvm.blog.tut.by/
P.S.
==
[PATCH 2/2] Drivers: hv: balloon: Online the hot-added memory "in context"
==
What news? Roadmap? -
New AP not showing in default group
I got a new 1042 AP and connected it to the network. I have a 2504 contrller with 6 AP's already on it. I thought I could just plu in the new AP and it would show up in the AP group. Instead it shows up as a rouge AP. How do i get the new AP to show up in the default group?
TIA,
EricRunning Normal Memtest...
Passed.
IOS Bootloader - Starting system.
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
Xmodem file system is available.
DDR values used from system serial eeprom.
WRDTR,CLKTR: 0x84000800, 0x40000000
RQDC, RFDC : 0x80000036, 0x00000208
PCIE0: link is up.
PCIE0: VC0 is active
PCIE1: link is up.
PCIE1: VC0 is active
PCIEx: initialization done
flashfs[0]: 146 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32385024
flashfs[0]: Bytes used: 5680128
flashfs[0]: Bytes available: 26704896
flashfs[0]: flashfs fsck took 25 seconds.
Reading cookie from system serial eeprom...Done
Base Ethernet MAC address: 44:03:a7:e8:71:f0
Ethernet speed is 100 Mb - FULL duplex
Loading "flash:/c1140-k9w7-mx.124-25d.JA1/c1140-k9w7-mx.124-
25d.JA1"...#######################################################################################################
File "flash:/c1140-k9w7-mx.124-25d.JA1/c1140-k9w7-mx.124-25d.JA1" uncompressed and installed, entry point: 0x4000
executing...
enet halted
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1040 Software (C1140-K9W7-M), Version 12.4(25d)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 11-Aug-11 02:58 by prod_rel_team
Proceeding with system init
Proceeding to unmask interrupts
Initializing flashfs...
FLASH CHIP: Numonyx P3
Radio0 present 8363 8000 90020000 0 90030000 B
Radio1 present 8363 8000 98020000 0 98030000 0
Ethernet speed is 100 Mb - FULL duplex
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-AP1042N-A-K9 (PowerPC405ex) processor (revision A0) with 98294K/32768K bytes of memory.
Processor board ID FTX1710K00G
PowerPC405ex CPU at 333Mhz, revision number 0x147E
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 44:03:A7:E8:71:F0
Part Number : 73-14034-06
PCA Assembly Number : 800-34273-07
PCA Revision Number : A0
PCB Serial Number : FOC170226AM
Top Assembly Part Number : 800-34285-05
Top Assembly Serial Number : FTX1710K00G
Top Revision Number : A0
Product/Model Number : AIR-AP1042N-A-K9
Press RETURN to get started!
*Mar 1 00:00:1
*Mar 1 00:00:15.215: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:23.219: AUTOINSTALL: GigabitEthernet0 is assigned 10.13.2.146
*Jan 13 00:54:01.001: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Jan 13 00:54:01.001: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Jan 13 00:54:02.000: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jan 13 00:54:02.000: %LINEPROTINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Jan 13 00:54:15.656: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.13.2.146, mask 255.255.0.0, hostname ap
*Jan 13 00:55:03.506: %CDP_PD-4-POWER_OK: Full power - NON_CISCO-NO_CDP_RECEIVED inline power source -
How do I use my new mac instead of old one with my iphone 4
I recently just got a new Mac and wont be able to use my old Mac because I will be leaving for college in a couple weeks. My iPhone 4 is set up with my old Mac. How do i get it to sync with my new Mac now instead of my old one? Because of space on my iPhone, I manually manage all of the music on it. When I have my iPhone connected to my new mac, it shows up in iTunes but it wont let me manage my music.
You can use Migration Assistant to migrate your old Home folder to your new computer. Or, if all you want is your iTunes Library, then copy the /Home/Music/iTunes/ folder to an external hard drive. Then move the external drive to the new computer and restore the folder to the /Home/Music/ folder on the new computer overwriting the one that's now there.
If you have never started up the new computer, then you can use the Setup Assistant instead of Migration Assistant to transfer your old Home folder to the new computer.
The two computers must be connected by Firewire cable or Thunderbolt cable depending upon what they both support. The old computer is booted into Target Disk Mode while the new computer is booted normally. In Setup or Migration Assistant you would be selecting the option to migrate from another Mac or disk drive.
Maybe you are looking for
-
I changed my primary email and icloud is still set for my old email. I tried deleting my icloud but it aks me for the old password associated with the old email that I don't have anymore. Any other sugestions on how to get icloud to change emails on
-
How to Undo Multiple Actions in ActionScript [CS5]
I am wwriting an InDesign extension for CS5 using ActionScript. I want to be able to undo a group of actions as a sungle transaction. In JS, I would use doScript() for this purpose. How do I do it in ActionScript? TIA, mlavie
-
Problem with starting webservice since latest patch.
Since we updated our NWDS and Server to (SP03 PAT0001) the webservices we create as a starting webservice for or BPM process don't appear in the single service administration. When we try to start the process manually from the process repository we c
-
How to get which JRE version is used during runtime?
Hi. I want to know in my application which JRE version the user is using. Is there some method in Properties Object? Thank you in advance
-
No reply field in large iMessage
Recently I've been unable to send a reply to a group iMessage I've received that's part of a long conversation. The little bar at the bottom with the options to attach a photo, write text, and use voice commands just doesn't show up. It works on othe