New Storage Section set up in WM

I had to set up some new bins in a new storage section, within an existing storage type in our warehouse. I thought I had configured everything, but when we attempt to transfer batches from the old bin that is being retired to the new one, we get an error message stating: Putaway in Storage Section XX is not allowed.
I did configure it in the storage section search, and am wondering what else I missed. I couldn't find any other strategy configuration that listed specific storage sections. What am I missing?

Jurgen,
thanks, I really owe you, this was the second question of mine you've answered this week. My error was that I had linked the new section to the section that the inventory is currently in. I had to link it to the one indecated on Material Master, and it worked fine. You rock!!!

Similar Messages

New Storage Check setting not working - Lumia 920

I received the new update yesterday but the new "Storage Check" doesn't work. I see it in settings but when I click on it it looks like it is going to do something (page flip animation) but then it goes right back to the settings. Does anyone have this issue or know how to fix it? I have done a soft reset and turned it off a few times. I do not want to do a hard reset because I recently did this and I have the phone the way I like it.

Guys, I'm form India.
Just updated my Lumia 920 to new firmware version 1308.0001
As reported by others, I have the same problem. My ''storage check'' option is not working at all!
It keeps on loading.
What to do?? Please help!
Attaching a screen shot.
Attachments:
wp_ss_20130409_0002.png ‏110 KB
wp_ss_20130409_0003.png ‏100 KB

Storage section check indicator -- ID & Pick point

Dear Gurus ,
1. I have defined new storage type with NO storage section check. then maintained material with storage type indicaor.with storage type search strategy only.
in this case the system does not suggest the bin or even storage type.
But if i maintain the storage section indicator & section search strategy then the system proposing Bin while creating TO.
Then what is the use of deactivating the storage section check while defining the storage type??
2. Can anybody explain me what is the ID point storage type & Pick point storage Type.
Is it mean that the perticular material from storage type can be only picked or putaway from the
storage type that is assighned ID or pick point?
If yes in which scenario it will be utilised or how it works?

What are the other influencing factors you have set for your storage type search? For example stock status, WPC? Activity - E or A or 2-step?
2. Can anybody explain me what is the ID point storage type & Pick point storage Type.
See here for ID point:
http://help.sap.com/saphelp_erp2005/helpdata/en/c6/f846b74afa11d182b90000e829fbfe/frameset.htm
and here for Pick Point:
http://help.sap.com/saphelp_erp2005/helpdata/en/c6/f847124afa11d182b90000e829fbfe/frameset.htm

Moved my library to an external hard drive. Now I get this message when trying to import video: Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again.

I recently moved my iMovie Library and all of its contents to an external hard drive. I then erased the library and all of its contents from my iMac HD and created a new library. Now when I try to import video from my DV camera I get this message: Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again. There is no way to set a storage location in Preferences. I have chosen an Event in the middle drop down box. But it still will not import. Any help will be greatly appreciated.

My iTunes library is set up the way I said in the top post and works totally fine.
Yes, and that is the default structure to which I was referring. iTunes will organize it that way automatically unless people do start changing settings (in which case they should know what they are doing and how iTunes works with library files and media structure.)
Both ways work, the advantages of mine would be that should iTunes try looking fo a library, it will always be in the default location.
It makes people think they have to change media location in preferences. They do not unless they want to relocate media only and leave other things on their internal drive (in which case there is no point in copying library files to the external, and you certainly wouldn't want to then delete them from your internal).
Downside is that then should someone move their iTunes library to anther computer they need to remember to get those library files on the external hard drive.
Just copy the whole iTunes folder and it will get the library files to the other drive in one step, along with all the other files.
Your post has good stuff but it makes a move appear intimidating and look like people have to do a lot of organizing to move the collection. It also throws in extra steps (namely altering preference settings) that could cause confusion or even make a mess of things. If people leave iTunes to default preference settings (which most people do) the move summarizes into a short line: Copy a folder and hold an extra button the next time you start iTunes.
Note that the instructions in the link I provided earlier do also include many steps, but those are to ensure that everybody does have it all organized correctly before simply copying the iTunes folder. In the end it is just a simple action.

Storage Section Settings

Hi Gurus
I put in the customizing of storage type Addition to stock "M" and in the material master I mark the flag for addition to stock this does not work as spected, when I receive a PO with 2 materials on it, they go to 902, then I try to process the posting change notice but I get error no destination storage bin could be found in storage type XXX
These 2 materials have the same storage section, and I have correctly defined a strategy to place accordingly this storage section,
The current putaway is L next empty bin, and if I change to "I" addn to stock then system allows the putaway but just for one materials automatically, with the second one I still get the error but If I manually type the bin of the storage section then It allows putaway too.
Can you explain what needs to be done to allow putaway of stock in a storage type wich is divided into 3 storage sections, 2 of them are assigned to two bins each (2X2=4bins), and the last storage section is linked only to one bin. (Total of 5 bins)
The rare thing here is that in the first 2 storage section that have 2 bins each, I can put material on it only one palled on each bin, if for some reason only half pallet is placed, then no more stock can be placed there, How to check this capacities?
And for last the strategy is that system tries to putaway first in storage section 1, if no empty bin then try in sto section 2, and if no empty bin there, then it should go to storage section 3 (wich has only one bin attached) but I want to make this bin like infinite capacity so if there is no room in the first two storage sections (4 bins) then it will go to the las storage section wich can allow addition to stock and mix storage.
Please your inputs will be really appreciated on what atrategy and capacity cetting need to be done on customizing and material master of material to achieve this.
Regards

Julio,
Better late than never...Here are the other capacity check methods:
Check 2:
=======
o SUT check must be active - if not, then config for SUT assignments to ST will not be used
o For the material no specific capacity data needs to be entered
o For the bin no specific capacity data needs to be entered
o Example:
             u2022     Material:          1234
             u2022     Liters per CAS:     4.800
             u2022     ST/Bin:          112/112-01-01
             u2022     Max Bin Weight:     1,500Kg
             u2022     Total Capacity:     3,000
             u2022     Stock to be placed (Weight):     907.200L = 2,721.600Kg (1L = 3Kg)
             u2022     Transaction SUT:     T1
             u2022     Allowed SUT for ST:     C1
o The system stops the transaction for the transaction SUT is not valid according the SUT allowed per Storage Type configuration. Message: Storage Unit Type is not allowed for ST112.
Check 3:
========
o The material must be created for the specific ST (WM2 masterdata view) and the maximum bin qty needs to be speicfied.
o For the bin no specific capacity data needs to be entered
o Example:
            u2022     Material:          3344
            u2022     Liters per CAS:     4.800
            u2022     ST/Bin:          113/113-01-01
            u2022     Max Bin Weight:     1,500Kg
            u2022     Max Bin Qty:                           750L
            u2022     Total Capacity:     0
            u2022     Stock to be placed (Weight):     768L = 2,304.000Kg (1L = 3.000Kg)
o The following checks were done:
            u2022     Bin Quantity Check
            u2022     The maximum bin qty was set to 750L (Base UoM)
            u2022     The quantity of the product to be placed was 768L ( = 2,304.000Kg). This qty is more than the maximum bin quantity which is 750L (Base UoM), so according to the quantity the product may not be placed in the bin. Message: Maximum qty for storage bin 113-01-01 will be exceeded by 3.750CAS.
o Note from the above that the error message is expressed on the putaway quantity and not the capacity quantity.
o Note: No weight and volume checks are done (see the weight of transaction > bin maximum weight)
Check 5:
========
o Additional config: SPRO  Logistics Execution  Warehouse Management  Master Data  Material  Define Storage Unit Types - Specify the capacity for the SUT
o For the material no specific capacity data needs to be entered
o For the bin the Total Capacity field must be filled
o Example:
            u2022     Material:          5678
            u2022     Liters per CAS:     4.800
            u2022      ST/Bin:          114/114-01-01
            u2022     Max Bin Weight:     1,500Kg
            u2022     Total Bin Capacity:     3.000
            u2022     Total SUT Capacity:     5.000
            u2022     Stock to be placed (Weight):     907.200L = 2,721.600Kg (1L = 3.000Kg)
o The following checks were done:
            u2022     Capacity Check according to SUT Capacity:
            u2022     The capacity of the SUT used is 5.000
            u2022     The capacity limit for the bin is 3.000
            u2022     The error message is displayed stating that the placement capacity is more than the allowed (maximum) capacity:
5.000- 3.000 = 2.000 (Message: Storage Unit Type C1 exceeds remaining capacity by 2.000)
o Note that no check according weight was done. The transaction weight was 2,721.600kg vs the maximum bin weight of 1,500.000kg
o Note from the above that the error message is expressed on the putaway quantity (SUT capacity used) and not the capacity quantity.
Check 6:
========
o Additional config: SPRO  Logistics Execution  Warehouse Management  Master Data  Material  Define Storage Unit Types - Specify the capacity for the SUT
o For the material enter a capacity value (WM1 view)
o For the bin enter a capacity value
o Example:
             u2022     Material:          1007
             u2022     Liters per CAS:     4.800
             u2022     ST/Bin:          115/115-01-01
             u2022     Max Bin Weight:     1,500Kg
             u2022     Material Capacity per BUoM:     1.000
             u2022     Total Bin Capacity:     800.000
             u2022     Total SUT Capacity:     5.000
             u2022     Stock to be placed (Capacity):     907.200L + 5.000 = 912.200
             u2022     Stock to be placed (Weight):     907.200L = 2,721.600Kg (1L = 3.000Kg)
The following checks were done:
             u2022     Capacity Check according to SUT Capacity:
             u2022     The capacity of the SUT used is 5.000
             u2022     The capacity limit for the bin is 800.000
             u2022     The error message is displayed stating that the placement capacity is more than the allowed (maximum) capacity: 912.200 - 800.000 = 112.2000 (112.200 / 4.800 = 23.375CAS). Message: Maximum qty for storage bin 115-01-01 will be exceeded by 23.375CAS.
o Note that no check according weight was done. The transaction weight was 2,721.600kg vs the maximum bin weight of 1,500.000kg.
o Note from the above that the error message is expressed on the putaway quantity (SUT capacity used) and not the capacity quantity.
======================================================================================================
There you go (I hope I've got all the detail down).
Cheers,
Hein
Edited by: Hein Botha on Mar 23, 2011 11:18 PM

Override the storage section check for manual entries

Hi All,
I am facing a issue on Storage section search.While creating To system is giving correct Storage section according t the settings but if I would like to change the storage section to different storage section system is not giving any error message.It is giving only warning message check your enteries.
So I would like know is there is config settings to avoid another storage section selcetion which are not assignned storage search indicator.
I have checked in help.sap.com .I following information .
To set up the strategy for storage sections, see the section on activating storage section searches under Strategies in the Warehouse Management IMG documentation.
If storage section checking is active for the storage type, then the system searches in the storage type only for those empty storage bins in storage sections that have been allowed for the material being put away. When you are creating a transfer order and manually enter a storage bin, then the system checks whether the bin is in a storage section that is allowed for the material.
*You can also make an entry in customizing that permits you to override the section check for manual entries.*_
Can please advice me inorder activate the config for override the section check for manual entries or any warning message.
Thanks & regards,
Srikanth

HI,
Thanks for your reply.
I want Error message.
Regards,
Srikanth P

How i can check new storage after i add it, specially LDAP storage

Hi
Thank you for reading my post.
is there any way that i can check whether new storages are configured correcyly inside sun access manager 7 or not?
for example I have an LDAP storage and i want to check whether i have add it correctly or not.
thanks

Ah I see what it is you are doing!
You are reintroducing unformatted text from the Sections.
Sections in a Word Processing document are "Captured" templates of individual page layouts, which includes the formatting of those pages when they were captured. When you Save As Template you have to make sure that the Sections have been fixed and captured, not just the visible pages. It is all Pages' weird way of doing Master Pages.
You will need to recapture the sections after you have changed the language to British English.
See the following link which explains how capturing Sections works:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&highlight=letter head&mforum=iworktipsntrick
Peter

Error states ''Putaway in storage section SSA is not allowed''.

Edited by: Sunny on Sep 11, 2008 10:26 AM

Hi
You need to check that you have the correct strategies set up for storage sections and for storage bins and for storage unit types that they are allowed to go where you are trying to put them
Frenchy

Storage section indicator functionality

Hi All,
Generally we are using Storage section search for WM in SAP.Previously by using this we restricting some goods movements to particular storage sections.But now this storage section search indicator functionality is not working .I have checked all configuration for storage section search .Everything seems to be correct but this functionality not working .
example: storage section indicator 001 should only be linked to storage section A, but it is also possible to put away in storage section B ?? We have only added section A to 001.
Can you please advice me what configuration settings needed to revert back the settings.
Thanks & Regards,
Srikanth P.

Hi
Check wther the storage section check active indicator is set at storage type level.
Storage section is used to further divide the storage type. It will be used only for Putaway process.
Check the following also
Storage section definiition for the wh no/storagetype combination
Storage typw indicator to the wh no
Material master storage section indicator
Storage bins created with the storage section
Hope it helps
Thanks/karthik

New Storage disks added to san

Hey all,
I have added a set of new storage disks to our san that is connected to our Netware boxes. The existing storage appears fine in remote manager. I have run scan all and scan for new hardware, but i can't get the new storage to appear under either of the qlogic cards.
Any suggestions as to what I need to do to get them to appear?

More of my setup..
I'm running NW 6.5 Sp5 with 2 qlogic ql2300 cards. I have a 1 TB drive presented to the server, I think it's done right? The SAN is a IBM DS4300. It's set to LUN1.
Between the SAN and the NW server is a fibre switch, an IBM Total Storage 16M2. No changes were made to the switch.
There is an existing array set to LUN0 and that is working fine to the NW server.
I have run SCAN ALL on the NW server to scan all LUNs. I then go into NSSMU and do a scan for new devices. The new array is not shown, just the original array on LUN0 and the internal drive.
Any ideas as to what I can do to get the new storage array to be shown in NSSMU? Any help would be greatly appreciated!

Problem in the storage section of " about that mac "

Hello everyone,
I recently bought a new 2014 Mac book pro retina 13 inch and I'm really happy with it even if I think that OSX Yosemite have some bugs ( usually fluidity ) .
But I have a problem in the storage section of "about that mac", the problem is that it says everywhere that i have used 66 Go of the storage but in that section it says that I have 77 Go of applications ( more than 60 go more ). So I wanted to know if it was hiding a bigger problem or if it was a basic OS problem without any importance.
I'm looking forward hearing from you !
Thank You

   Re-index Macintosh HD.
   Spotlight reindexing will take a while to finish.
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409
   You will see a new category “Other” in the Storage Display.
   About “Other”:
   http://support.apple.com/en-us/HT202867
Note:
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273

Transaction for adding a new storage location?

Hi All
What is the trx for setting up a new storage location?
Thanks in advance
Darren

hi
OX01                 Company Code -> Purchasing Org.
OX02                 Customizing: Company Code Setup
OX03                 Customizing: Business Area Setup
OX06                 Controlling Area: Basic Data
OX08                 Define Purchasing Organization
OX09                 Customize storage locations
OX10                 Customize plant
OX14                 C MM-IV Valuation area - val. level
OX15                 Define internal trading partner
OX16                 Assignment co.code->Internl.trad.ptr
OX17                 Plants -> Purchasing organization
OX18                 Plants->company code
OX19                 Controlling Area: Assgn. to CCode

Storage section stragey - how does it work?

I have setted the storage section stragety in the material master, view wm1. The strategy is placing first in area A1 and then in area A2.
It's working like this: firts the units are placed in A1 Bins according with the capacity, and when all A1 Bins are full, then it places units in A2 bins. But when SAP looks for free A1 bins it's looking for in an alphanumeric way, so it first place units in A1-BIN1 and then in A1-BIN2
Is it possible that SAP first place units in the storage bin that I set in the material master, view WM2? So, for example, if I set A1-BIN2 here, this material will be placed first in this storage bin, and then it would look for free A1 bins with the alphabumeric way, but I want the firstone storage bin it places unit would be the one I set in WM2 view.
I'll appreciate very much your comments!
thanks!

1) The storage sec indicator mentioned in the WM1 view is maintined at warehouse level and will follow the search strategy defined in SPRO.
2) Whenever putaway happens system looks at the indicator first in the WM1 view and searchs the relavant storage sec in the search sequence in the Activate storage sec search in SPRO and putaway happens.
3) The Bin number which you have mentioned in the WM2 view is a Fixed Bin and this is maintained at warehouse and storage type level and its meant for replenishment only.
So, whenever replenishment is created system will not follow the storage sec search strategy based on the indicator mentioned in the WM1 view. System just searchs the fixed bin mentioned in the WM2 view based on the storage type search strategy which has a ref indicator and which in turn is assigned to the replenishment movement type in SPRO.
So, Bin number maintained in WM2 view is fixed bin and its for Replenishment activity only.

New storage node not taking any traffic

Hi all,
I have a strange situation where we introduced a few new storage nodes into a cluster that already had about 190 storage nodes running. From what I can tell, the nodes joined the cluster just fine (I see them listed as part of the cluster according to the JMX node, and their logs indicate as much).
The problem is that they don't seem to take any traffic. Their get and put counts are at 0, their size is at 0. They have the exact same configuration as every other node running in the cluster, and are even running on the same box as other storage nodes (so shouldn't be networking related).
Any ideas as to what could cause this to happen? They nodes have been up for days now and nothing has changed. There isn't anything along the lines of errors in the storage node logs or anything that seems to be related or would indicate a problem.
Thanks,
Chris

Hi Chris,
What is your partition count set to, is it still the default of 257? If it is then this could be your problem, I have had issues in the past with partition counts too close to the cluster size. For a cluster of 190 nodes you really need a big partition size, we have 8191 on a 170 node cluster.
JK

Authorization on Storage Section

Hi Experts,
Recently I faced a big problem in WM when I have created a role which contains create transfer order transaction (LT04), the problem is there's no storage section in the authorization organizational structure, there's only warehouse number and storage type.
How I can create authorization on storage section in each storage type for each user?
Thanks

Hi Tamer,
You are right at the time of TO creation, System does a validation check on Storge type and Storage bin and Storage section data gets populated automatically hence based on my knowledge i don't think Standard SAP is having the authorization object for Storage section
Please get in touch with your BASIS team might be they will be able to help you by setting something in the role

New Storage Section set up in WM

Similar Messages

Maybe you are looking for