New Stream 7 Randomly BSOD

I bought a stream 7 from the Microsoft Store and got it a couple of days ago. Shortly after, I noticed I would get random BSOD. Sometimes, after a BSOD, it would also BSOD during start up and automatic startup repair would start and fail. Then it would start normally. I've tried doing refresh and reset. I still get random BSOD. What could be wrong?
This question was solved.
View Solution.

yea BSOD is very rare in windows 8 and is usualy the cause of two things, failing hardware, and incorrect driver installed.
You will need to give us the information on the blue screen though for us to answer any further, HOWEVER... since I doubt you installed any rogue drivers I suspect a piece of hardware has failed and considering nothing in the tablet is replaceable, you should arrange for a return to the microsoft store for a refun or replacement.

Similar Messages

T510 Randomly BSODs - but not in Safe Mode

My brand new T510 randomly Blue Screens throughout the day, after installing Windows 7 Ultimate 64-bit aftermarket. I've downloaded all the 64-bit drivers from Lenovo and installed them, I've updated to the newest BIOS. I've rebuilt several times now and tried leaving certain drivers uninstalled. It still BSODs. Sometimes it's once every two hours, others it's 3 times in 10 min.
I am about to do a mem check. The CPU doesn't appear to be overheating...in fact it usually freezes and reboots when I am on the web, or in a directory. It comes back up with the 124 error. I've looked at the minidump and haven't gleaned much info, as it's a different service or app that causes the BSOD each time.
I'm just wondering if anyone else is having issues with 64-bit Ultimate on the T510? It appears to me it's a driver issue, as I can work just fine in Safe Mode. But it may be a hardware issue, I dunno....any help or insight would be greatly appreciated.
Thanks in advance!

No stability issues thus far. It's the factory-installed Win7 Pro 64. And I haven't updated any of the drivers or BIOS. Once the new BIOS is out that fixes the keyboard issue, I'll update it and probably all the drivers and tools.
So, you didn't burn the recovery DVDs first before you nuked everything?
ThinkPad T510 : i5-540M : 8GB PC-10600 : 500GB 7200rpm : 15.6" HD+ : Intel 6300 : Win7 Pro 64 : 9Cell
Ordered 2/Feb/2010 : Shipped 22/Feb/2010 : Received 3/Mar/2010

Windows server 2012 R2 randomly BSOD's

Dear all,
Since recently we suffering from random BSOD's on a Windows 2012 R2 terminal server. We already checked if there has been any changes, updates, new drivers installed, etc. around the time we receive the first one, but we cannot find anything. The server
is a virtual server on Hyper-V but the Hyper-V host doesn't suffer from BSOD's and is working properly. We updated the servers with newest windows updates. Could someone please help me debugging this minidump:
Loading Dump File [C:\Users\admtem\Desktop\031915-48906-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred srv*c:\cache*http://msdl.microsoft.com/download/symbols
Symbol search path is: srv*c:\cache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (16 procs) Free x64
Product: Server, suite: TerminalServer
Built by: 9600.17668.amd64fre.winblue_r8.150127-1500
Machine Name:
Kernel base = 0xfffff801`f4489000 PsLoadedModuleList = 0xfffff801`f4762250
Debug session time: Thu Mar 19 01:55:51.856 2015 (UTC + 1:00)
System Uptime: 0 days 2:21:59.525
Loading Kernel Symbols
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck A, {fffff90140599000, 2, 0, fffff801f45280ab}
Probably caused by : ntkrnlmp.exe ( nt!KeSetEvent+3fb )
Followup: MachineOwner
6: kd> !analyze -v
* Bugcheck Analysis *
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffff90140599000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff801f45280ab, address which referenced memory
Debugging Details:
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff801f47ec138
unable to get nt!MmNonPagedPoolStart
unable to get nt!MmSizeOfNonPagedPoolInBytes
fffff90140599000
CURRENT_IRQL: 2
FAULTING_IP:
nt!KeSetEvent+3fb
fffff801`f45280ab 488b09 mov rcx,qword ptr [rcx]
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: AV
PROCESS_NAME: System
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
TRAP_FRAME: ffffd00142686900 -- (.trap 0xffffd00142686900)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffd001475bc4e8 rbx=0000000000000000 rcx=fffff90140599000
rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff801f45280ab rsp=ffffd00142686a90 rbp=0000000000000000
r8=0000000000000000 r9=fffff801f492c628 r10=fffff90140599000
r11=ffffd00142686b00 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz ac po nc
nt!KeSetEvent+0x3fb:
fffff801`f45280ab 488b09 mov rcx,qword ptr [rcx] ds:fffff901`40599000=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff801f45e54e9 to fffff801f45d99a0
STACK_TEXT:
ffffd001`426867b8 fffff801`f45e54e9 : 00000000`0000000a fffff901`40599000 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
ffffd001`426867c0 fffff801`f45e3d3a : 00000000`00000000 ffffd001`475bc4e0 ffffe001`26538900 ffffcf81`0df3afa0 : nt!KiBugCheckDispatch+0x69
ffffd001`42686900 fffff801`f45280ab : 00000000`00002608 00000000`00000000 00000000`00000030 00000000`00000000 : nt!KiPageFault+0x23a
ffffd001`42686a90 fffff801`f45343ac : fffff901`40599000 ffffe001`00000000 ffffe001`25f34800 fffff801`00000000 : nt!KeSetEvent+0x3fb
ffffd001`42686b50 fffff801`f4561280 : 13131313`13131313 ffffe001`25f34880 00000000`00000080 ffffe001`25f34880 : nt!ExpWorkerThread+0x28c
ffffd001`42686c00 fffff801`f45dffc6 : ffffd001`42040180 ffffe001`25f34880 ffffd001`4204c5c0 13131313`13131313 : nt!PspSystemThreadStartup+0x58
ffffd001`42686c60 00000000`00000000 : ffffd001`42687000 ffffd001`42681000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KeSetEvent+3fb
fffff801`f45280ab 488b09 mov rcx,qword ptr [rcx]
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: nt!KeSetEvent+3fb
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 54c832b2
IMAGE_VERSION: 6.3.9600.17668
BUCKET_ID_FUNC_OFFSET: 3fb
FAILURE_BUCKET_ID: AV_VRF_nt!KeSetEvent
BUCKET_ID: AV_VRF_nt!KeSetEvent
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:av_vrf_nt!kesetevent
FAILURE_ID_HASH: {3ff99d47-0a85-0b19-f59a-c152651b9c12}
Followup: MachineOwner
Any help would be much appriciated!
Kind Regards,
Thijs

Hi Thijs,
Just addition, please also check if all necessary windows updates were installed in this problematic server. Please check if drivers need to be updated.
Please also refer to following thread and check if can help you.
Blue Screen Error (Probably caused by : ntkrnlmp.exe)
If this issues is a state of emergency for you. Please contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Random BSOD - Toshiba Qosmio X500 13R (Windows 7 Home Premium x64) have min

I've been having some problems with random BSODs on my laptop.
The laptop itself is fairly new,bought in March this year,really good model but refently I started having problems.
One day I closed the laptop and thinking it went into sleep mode but a few hours later when I opened it a BSOD stared me in the face,the processor part was pretty hot so I immediately restarted it to lower the temperature,but I remember that the BSOD had something about "Kernel Power" written on it.
It happend 3-4 times since then,the third time it happened I enabled minidump logging so now I also have the log from the last time it happened,can anyone take a look at it and tell me what is going on and how to fix it??
I still have a guarantee on this baby so I can get it fixed for free if it's a hardware issue, still I have some important work to do this week (already almost lost a crucial project file on this) so I want to try and fix it myself for now,until I get this project done.
Thanks!!!
LAPTOP MODEL:
Toshiba Qosmio X500 13R
Specs:
QOSMIO X500-13R - RED
Intel Core i7-740QM Processor, 1.73 GHz
Windows 7 Home Premium 64-bit
18.4'' Toshiba TruBrite Full HD 1,920x1080
1000GB HardDisk (500GB + 500GB [7200rpm])
8GB RAM DDR3 (1,066 MHz) max 8GB
NVIDIA GeForce GTS 460M (1.50GB)
Wireless LAN b/g/N-Bluetooth
TV Tuner
Rewritable Blu-ray Disc
HD Web Camera with built-in Mic
Minidump file:
http://www.mediafire.com/?94akhevoscc8197

>I still have a guarantee on this baby so I can get it fixed for free if it's a hardware issue, still I have some important work to do this week (already almost lost a crucial project file on this) so I want to try and fix it myself for now,until I get this project done.
The BSOD can be caused by software of hardware issue.
You can check if new OS installation would solve this if its software issue then a fresh OS installation is the right workaround. Before starting a OS installation, backup the data ;)
But of course the issue could be related to hardware; for example high temperature.
You said that you have noticed higher temperature while happening.
So maybe the memory modules are affected by higher temperature and this leads to BSOD. In most cases clogged fans are reason for that. Check if dust and debris needs to be removed you can remove dust using compressed air spray.
But if this does not help, I would recommend checking the hardware under warranty conditions

MSI Z97 MPOWER MAX AC, getting Random Bsod

I installed my new msi z97 mpower and i7 4790k and iv gotten random bsod, mostly when running youtube videos in fullscreen 1080p and when i tried to defrag my hdd i always got bsod. I formated everything and only installed the LAN driver from my dvd so i could get internet going and then i updated all up to windows 8.1, wich i then proceded to download the drivers from MSI Updater Live.
Main Board: MSI Z97 MPOWER MAX AC
Bios Version: 1.60
Video Card: Gigabyte GeForce GTX 980 4GB G1 Gaming
PSU: Corsair AX 850W 80+ Gold
12v rail Rating of listed PSU:
CPU: Intel Core i7 4790K 4GHz, 8MB
Memory:Corsair 16GB (4x4GB) CL9 1600Mhz VENGEANCE Quad Channel
SSD/ HDD: Corsair SSD Force 3 Series 180GB + 2TB WD Black 7200rpm 64MB
CPU COOLER: Corsair Hydro H100
Raid Card: None
Sound Card: None
Any Additional hardware plugged into your system: Gigabyte GTX 980
OC: No
Operating System: Windows 8.1 64bit
Drivers i have installed:
The bsod I'v gotten since i formated my harddrives, using WhoCrashed:
(This happen when i was typing this thread and it also knocked my mouse and keyboard out so i had to change their usb slots to make them work again)
I'v watched some other threads who had similar problems but i couldnt come to a conculsion on what problem i had, so any help would be very appriecated.

I have not tried the clear cmos guide and I will try it.
I have tried memtest, and passed. But iv only let it pass once after closing it because I didnt know how it worked.
Its 4x4gb singlekit. I will try the 'Exclude method' next
Here is the messages i got after clearing cmos
Edit: Clearing CMOS did not solve my problem.

Random BSOD after installing port replicator drivers.

Hi, my boss just got a new laptop (TP T400s running Windows 7) and after configuring it, it was working fine. But then I installed the drivers for the USB port replicator with digital video and after rebooting, right after the login screen, it BSOD, complaining about igdkmd64.sys. Rebooted again, it didn't crashed upon login this time, just a little while later when clicking on the start menu. After more test, the replicator seemed to work, but not the digital video port. The DVI connector didn't worked correctly, just the mouse pointer was being displayed. Trying to set resolution didn't do anything and switching output source via Win-P provoked a strange flickering for a minute or so and then the machine automatically rebooted. Tried the driver found on the CD (1.0) and also those available through Lenovo website (1.5.6.8), always the same thing. Now I've uninstalled the drivers and the random BSOD keep reappearing.
Is this issue common? Is the port replicator faulty or is it the ThinkPad? Is the windows installation screwed, can it be repaired? What is Lenovo return policy?
I've also seen lots of complaints on this forum about random shutdown, this would be as unacceptable for us than the current BSOD we're experiencing. Is that situation widespread?
P.S.: We're trying to get work done, not beta test Lenovo products!
Thanks
Solved!
Go to Solution.

nbuduroi wrote:
Hi, my boss just got a new laptop (TP T400s running Windows 7) and after configuring it, it was working fine. But then I installed the drivers for the USB port replicator with digital video and after rebooting, right after the login screen, it BSOD, complaining about igdkmd64.sys. Rebooted again, it didn't crashed upon login this time, just a little while later when clicking on the start menu. After more test, the replicator seemed to work, but not the digital video port. The DVI connector didn't worked correctly, just the mouse pointer was being displayed. Trying to set resolution didn't do anything and switching output source via Win-P provoked a strange flickering for a minute or so and then the machine automatically rebooted. Tried the driver found on the CD (1.0) and also those available through Lenovo website (1.5.6.8), always the same thing. Now I've uninstalled the drivers and the random BSOD keep reappearing.
Is this issue common? Is the port replicator faulty or is it the ThinkPad? Is the windows installation screwed, can it be repaired? What is Lenovo return policy?
I've also seen lots of complaints on this forum about random shutdown, this would be as unacceptable for us than the current BSOD we're experiencing. Is that situation widespread?
P.S.: We're trying to get work done, not beta test Lenovo products!
Thanks
The win7 driver for the usb port replicator with digital output is not out yet. So, you cannot get it work under win7. I recall seeing an official flyer of the product, in which there is a line stating that a win7 driver will be out in December.

Randomly BSODs caused by ntoskrnl.exe

I have random BSODs, this is the dump file... any ideas? I tried to update all drivers, but I solved nothing.
Microsoft (R) Windows Debugger Version 6.3.9600.17029 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86\061114-29937-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Error: Attempts to access '061114-29937-01.dmp' failed: 0x0 - The operation completed successfully.
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Error                                          061114-29937-01.dmp
Symbol search path is: 061114-29937-01.dmp
Executable search path is:
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
Machine Name:
Kernel base = 0xfffff800`6e28e000 PsLoadedModuleList = 0xfffff800`6e5582d0
Debug session time: Wed Jun 11 20:29:12.062 2014 (UTC + 2:00)
System Uptime: 0 days 0:22:21.219
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
************* Symbol Loading Error Summary **************
Module name            Error
ntoskrnl               The system cannot find the file specified
You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
*                        Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck 133, {1, 1e00, 0, 0}
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information. Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information. Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.
***    Type referenced: nt!_KPRCB
5 times more...
***    Either you specified an unqualified symbol, or your debugger   ***
***    doesn't have full symbol information. Unqualified symbol      ***
***    resolution is turned off by default. Please either specify a   ***
***    fully qualified symbol module!symbolname, or enable resolution ***
***    of unqualified symbols by typing ".symopt- 100". Note that   ***
***    enabling unqualified symbol resolution with network symbol     ***
***    server shares in the symbol path may cause the debugger to     ***
***    appear to hang for long periods of time when an incorrect      ***
***    symbol name is typed or the network symbol server is down.     ***
***    For some commands to work properly, your symbol path           ***
***    must point to .pdb files that have full type information.      ***
***    Certain .pdb files (such as the public OS symbols) do not      ***
***    contain the required information. Contact the group that      ***
***    provided you with these symbols if you need this command to    ***
***    work.
***    Type referenced: nt!_KPRCB
Probably caused by : ntoskrnl.exe ( nt+153fa0 )
Followup: MachineOwner
Systeminfo:
OS Name:                   Microsoft Windows 8.1 Pro
OS Version:                6.3.9600 N/A Build 9600
OS Manufacturer:           Microsoft Corporation
OS Configuration:          Standalone Workstation
OS Build Type:             Multiprocessor Free
Original Install Date:     30/10/2013, 13:43:05
System Boot Time:          11/06/2014, 20:29:52
System Manufacturer:       TOSHIBA
System Model:              Satellite L500
System Type:               x64-based PC
Processor(s):              1 Processor(s) Installed.
                           [01]: Intel64 Family 6 Model 37 Stepping 2 GenuineIntel ~2261 Mhz
BIOS Version:              TOSHIBA 2.10, 17/05/2011
Windows Directory:         C:\WINDOWS
System Directory:          C:\WINDOWS\system32
Boot Device:               \Device\HarddiskVolume2
Total Physical Memory:     3.958 MB
Available Physical Memory: 1.792 MB
Virtual Memory: Max Size: 7.926 MB
Virtual Memory: Available: 5.492 MB
Virtual Memory: In Use:    2.434 MB
Page File Location(s):     C:\pagefile.sys
Domain:                    WORKGROUP
Logon Server:
\\MicrosoftAccount
Hotfix(s):                 56 Hotfix(s) Installed.
                           [01]: KB2899189_Microsoft-Windows-CameraCodec-Package
                           [02]: KB2843630
                           [03]: KB2868626
                           [04]: KB2883200
                           [05]: KB2887595
                           [06]: KB2889543
                           [07]: KB2891214
                           [08]: KB2893294
                           [09]: KB2894029
                           [10]: KB2894179
                           [11]: KB2898868
                           [12]: KB2900986
                           [13]: KB2901125
                           [14]: KB2901128
                           [15]: KB2903939
                           [16]: KB2904440
                           [17]: KB2911106
                           [18]: KB2912390
                           [19]: KB2913152
                           [20]: KB2916036
                           [21]: KB2919355
                           [22]: KB2919394
                           [23]: KB2919442
                           [24]: KB2920189
                           [25]: KB2923528
                           [26]: KB2923768
                           [27]: KB2926765
                           [28]: KB2928680
                           [29]: KB2931358
                           [30]: KB2931366
                           [31]: KB2939153
                           [32]: KB2939576
                           [33]: KB2950153
                           [34]: KB2953522
                           [35]: KB2954879
                           [36]: KB2955164
                           [37]: KB2956575
                           [38]: KB2957151
                           [39]: KB2957189
                           [40]: KB2957689
                           [41]: KB2958262
                           [42]: KB2959977
                           [43]: KB2961908
                           [44]: KB2962140
                           [45]: KB2964718
                           [46]: KB2964736
                           [47]: KB2965065
                           [48]: KB2965142
                           [49]: KB2965500
                           [50]: KB2965699
                           [51]: KB2965788
                           [52]: KB2966072
                           [53]: KB2966407
                           [54]: KB2966804
                           [55]: KB2969817
                           [56]: KB976002
Network Card(s):           10 NIC(s) Installed.
                           [01]: Realtek PCIe FE Family Controller
                                 Connection Name: Ethernet
                                 DHCP Enabled:    Yes
                                 DHCP Server:     N/A
                                 IP address(es)
                           [02]: Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC
                                 Connection Name: Wi-Fi
                                 Status:          Hardware
not present
                           [03]: Hyper-V Virtual Ethernet Adapter
                                 Connection Name: Ethernet 6
                                 Status:          Media
disconnected
                           [04]: Hyper-V Virtual Ethernet Adapter
                                 Connection Name: Ethernet 3
                                 Status:          Media
disconnected
                           [05]: Hyper-V Virtual Ethernet Adapter
                                 Connection Name: Ethernet 5
                                 DHCP Enabled:    Yes
                                 DHCP Server:     192.168.1.1
                                 IP address(es)
                                 [01]: 192.168.1.129
                                 [02]: fe80::1513:f368:3c1e:c173
                           [06]: Hyper-V Virtual Ethernet Adapter
                                 Connection Name: Ethernet 4
                                 DHCP Enabled:    No
                                 IP address(es)
                                 [01]: 169.254.80.80
                                 [02]: fe80::4892:9cb3:7a80:2057
                           [07]: VMware Virtual Ethernet Adapter for VMnet1
                                 Connection Name: VMware Network Adapter VMnet1
                                 DHCP Enabled:    No
                                 IP address(es)
                                 [01]: 192.168.223.1
                                 [02]: fe80::a11c:f4d5:c02f:9fcf
                           [08]: VMware Virtual Ethernet Adapter for VMnet8
                                 Connection Name: VMware Network Adapter VMnet8
                                 DHCP Enabled:    No
                                 IP address(es)
                                 [01]: 192.168.132.1
                                 [02]: fe80::fc9a:9075:a71e:776c
                           [09]: TAP-Windows Adapter V9
                                 Connection Name: Local Area Connection 3
                                 Status:          Media
disconnected
                           [10]: Hyper-V Virtual Ethernet Adapter
                                 Connection Name: vEthernet (TAP-Windows Adapter V9 Virtual Switch)
                                 Status:          Media
disconnected
Hyper-V Requirements:      A hypervisor has been detected. Features required for Hyper-V will not be displayed.

Hi,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
2. Copy any and all DMP files in the Minidump folder to your Desktop and then zip up these files.
3. Upload the zip containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply. Preferred sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers, download managers, etc.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel-Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel-Dumps in the simplest definition is a Kernel-Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel-Dump is the best
choice. Do note that Kernel-Dumps are much larger in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
After doing that, to learn how to share the link to the file if you are unaware, please visit the following link -
Share files and folders and change permissions and view 'Get a link'.
Please note that any "cleaner" programs such as TuneUpUtilities, CCleaner, etc, by default will delete .DMP files upon use. With this said, if you've run such software, you will need to allow the system to crash once again to generate a crash dump.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all
drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system
log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

Gt70 dragon edition 2 random bsod

hello everyone ,, 4 days ago i bought a new msi gt70 dragon edition 2 with these system specs
i7-4700mq processor
nividia geforce gtx780m
750gb +128g ssd(super raid)
ram 32gb
os: windows 8
and i got random BSOD's a lot until now i got like 8 BSOD's and it just happens randomly .. i tried a lot of thing ,, changing drivers , deleting programs and even the (Killer's network drivers only [without software suite])
driver ... please tell me what to do .. this is the dump file to read the error or something like that
although i tried attaching the file on the post but i couldn't so i guess i'll have to upload it to mediafire
www(.)mediafire(.)com/download/d82175lxyof34zd/SF_04-01-2014.zip <<< please remove the () between the .
guys please tell me if it's something related to the hardware so i could replace the laptop itself within the given days because i bought it couple days ago

Okay. I see the confusion. He is using the drivers that Svet recommended. Which are slightly newer than your own, but are also without the Killer Network Manager and must be installed manually. (10.0.1.263 for the Wireless and 8.0.2.42 for the e2200)
My issues with the wireless seemed to go away with Svet's drivers - which was essentially a newer download pinned to the forums of what Warner gave to you. He could give Warner's a try but they basically are the same. I assumed my issue didn't go away as I was having another BSOD issue that didn't exactly specify which device was causing the BSOD.
As for my issue - I have uninstalled the Logitech software and haven't had a crash within the past day and a half. I noticed the longer I have the laptop on, the more likely the BSOD. So, I am leaving it on all day playing games off and on.
I did notice that SetPoint does install software that is meant for keyboards. Simply because Logitech has a unified driver suite between their mice and keyboards able to use a single wireless dongle, eliminating the need to use one for each device. This could, in theory, be causing an issue with the MSI SCM. Most people think of the SCM as a control app, but it also installs a service (called Micro Star SCM) which handles event communication between several different driver packages/software. This is why when the SCM is uninstalled, the keyboard light manager fails to start up as well as Hybrid Power and a few other MSI apps. If uninstalling the Logitech software does work, then it could be that the keyboard manager in SetPoint is intercepting events that should be going to the SCM service.
If it crashes again, I will swap out the mouse itself. I'll update my thread on this issue on the next crash or in a few days if I have no further issues. I'm crossing my fingers and thanks for the tips.

Random BSOD after installing Windows 8.1 on Lynx K3011

I upgraded the graphics drivers as intructed her in another thread and that works now. However I keep getting a random BSOD with the error MEMORY_MANAGEMENT.
I did a bug check analysis and this is the result:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\101413-9031-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 9600.16384.x86fre.winblue_rtm.130821-1623
Machine Name:
Kernel base = 0x81c14000 PsLoadedModuleList = 0x81e0e218
Debug session time: Mon Oct 14 12:47:54.837 2013 (UTC - 7:00)
System Uptime: 0 days 0:00:09.648
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck 1A, {1238, 85ea6368, 802, 0}
Probably caused by : rdyboost.sys ( rdyboost!ST_STORE<SMD_TRAITS>:tReleaseRegion+4c )
Followup: MachineOwner
3: kd> !analyze -v
*                        Bugcheck Analysis                                    *
MEMORY_MANAGEMENT (1a)
    # Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 00001238, The subtype of the bugcheck.
Arg2: 85ea6368
Arg3: 00000802
Arg4: 00000000
Debugging Details:
BUGCHECK_STR: 0x1a_1238
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from 81d63c8d to 81d14ce4
STACK_TEXT:
8b90ebf0 81d63c8d 0000001a 00001238 85ea6368 nt!KeBugCheckEx
8b90ec38 82d1abb4 85ea6368 8506b040 00000162 nt! ?? ::FNODOBFM::`string'+0x355e7
8b90ec54 82d18dec 00000000 8506bd10 00000001 rdyboost!ST_STORE<SMD_TRAITS>:tReleaseRegion+0x4c
8b90ecc4 82d1704b 00000000 86291040 8506b008 rdyboost!ST_STORE<SMD_TRAITS>:tDmPageRemove+0x3ac
8b90ed00 82d1739e 00000000 8506c200 83a4b040 rdyboost!ST_STORE<SMD_TRAITS>:tWorkItemProcess+0xf3
8b90ed40 82d266a0 ce25f08e 00000000 8506c200 rdyboost!SMKM_STORE<SMD_TRAITS>:mStWorker+0xfc
8b90ed70 81cc36a8 8506b008 61b2fcc6 00000000 rdyboost!SMKM_STORE<SMD_TRAITS>:mStWorkerThread+0x1d
8b90edb0 81d2a701 82d26683 8265bf68 00000000 nt!PspSystemThreadStartup+0x58
8b90edbc 00000000 00000000 2444c718 80000010 nt!KiThreadStartup+0x15
STACK_COMMAND: kb
FOLLOWUP_IP:
rdyboost!ST_STORE<SMD_TRAITS>:tReleaseRegion+4c
82d1abb4 6a00            push    0
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: rdyboost!ST_STORE<SMD_TRAITS>:tReleaseRegion+4c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: rdyboost
IMAGE_NAME: rdyboost.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 52158f40
BUCKET_ID_FUNC_OFFSET: 4c
FAILURE_BUCKET_ID: 0x1a_1238_rdyboost!ST_STORE_SMD_TRAITS_:tReleaseRegion
BUCKET_ID: 0x1a_1238_rdyboost!ST_STORE_SMD_TRAITS_:tReleaseRegion
Followup: MachineOwner
Any ideas? Probably more incompatible drivers. If I can't get Windows 8.1 running correctly, does anyone know how to restore the system image?
Solved!
Go to Solution.

this error is so much obvius.
just look on internet on how to disable readyboost. additional just turn off the hybrid function and u will never see this bsod again, even i dont know how dumb ur mediacenter edition is and want to give u other bsods. btw i only seen bsods couse of **bleep** driver on my devices. donno how u manage to get such bluescreens......
btw according to the results i recommning ya to use ckhdsk /f to ur disk. mstWorker is mentioned wich means read write issues on access files. mstworker is microsoft Tiworker, an process wich examines files an bit. used by winupdate and the indexer.

Ipad: photo app crashes while "make new stream" for icloud

HI,
I have a problem using the photo app on my ipad (with the most actual ios software IOS7.1). I would like to generate a new shared photostream. When I touch "make new stream" the app crashes and needs to be closed with "doubleklick" on the home button and close it. Otherwise it does not work again.
I already made a soft-reset, a complete reset of the ipad. I also de- and reactivated the Icloud setting.
With the same software version on my iphone it works without any problem.
Can somebody help me?
Kind regards and thank you very much!
Clear

Pleae - does anyone have any input?

New Stream API and I/O streams - Any overlap?

I know the new Stream API is for processing object streams, often from collections.
But is this notion applicable to I/O streams, too?
It definitely seems compelling to use a functional approach to I/O streams that supports parallelism.
Let me know if my question doesn't make any sense to you
Thanks
Oliver

Indeed, there is some interplay between the APIs.
For example BufferedReader defines a lines() method that returns a (lazily-read) Stream<String>, each element being a line. The Files class in java.nio.file has a utility lines(Path path) method.
So assuming you have some class MyClass, some MyClassParser with a parse method, you can use idioms like
void processFile(Path path) throws IOException {
    MyClassParser parser = ... ;
    try (Stream<String> lines = Files.lines(path)) {
        lines.map(parser::parse).forEach( myObject -> ...);
If you want to parallelize it, do
lines.parallel().map(parser::parse)...
(assuming your parser.parse method can handle multiple threads)

My new iPhone randomly just stopped working and will not turn on what should i do?

My new iPhone randomly just stopped working and will not turn on what should i do?

thanks paul, i just had a similar problem, had to hold it for 30 seconds and the apple sign has come up, my phone was vibrating for over two hours completly unresponsive, now my lap top seems to be comunicating too, oh hello, its back on again...thank you!!!!

I am launching a new Streaming video service...

I am launching a new Streaming video service, and I am looking for a tool to capture the image
edit that image, add some characters like game score, or a title, and then send that to a website
or different devices like iOS devices ( iphone, ipad, androide ), Can I do that using FLASH ?
If I can do that ( Edition activity ), it should be done before send it to the website and/or the
mobile devices, right ?.
Gustavo

As Rob already said, LR does not make use of all the special GPU features of later Graphic cards as it does not use GPU acceleration. Maybe a future version will. For now, I suggest to invest the money in a fast SSD and enough RAM as well as a faster CPU of course.

Duplicating stream object to new stream with lower resolution

Hi all generally I have a question, Is it possible for ams to split my original live stream to a new stream but with lower resolution, so i have two streams one with high resolution and one with low resolution?
If not I how does it Adobe Flash Media Live Encoder do? I can steam up to 3 different resolutions from one camera object. Is it possible to do also from flash?
I want to built a multi user conference application. But have some cpu usage issues, so I need a additional lower resolution stream to use for the miniature views.
Could You help me with this, any tips how could I do such a thing?
I using rtmp protocol to communicat and adobe media server 5.
Sorry if a similar thread was already published on this forum.

Thx 4 the replay.
So maybe I could do something like this:
I am able to send two streams from one camera but they both have the same resolution.
Is there any way from flash app to send two streams from one camera with different resolution like FMLE does?

Random BSOD/Crackle Pop in BF2/BSOD in BF2142 on X-FI Fatality FPS Champ

Using latest drivers from Creative v2.9.7 not the June/July update through windows update because it kills the DTS and makes the sound sound all monolike. Ok so here it goes, the driver support says that the latest should've fixed the BF2 crack/snap/pop sounds but I just reinstalled the game recently and I still hear it even with the current version I use so I guess it isn't fixed. 2nd issue is when setting it audio to x-fi with Ultra High, it BSOD's after awhile or so of playing with ha20x2k.sys. Also I get random BSOD's from doing various things such as I could be watching a movie then wanted to play a game or something then a BSOD occurs thereafter with ha20x2k.sys issue again. No this doesn't happen all the time just after my computer has been used for a few days and when I have been listening to various audio's from being a movie or music. On some games it just gives BSOD as if it were random. After a quick reboot I can play the game fine so I just know it's random to the point where it can happen if maybe multiple files with audio are initiated either it being a game and/or movie. And last issue is BF242. I find it funny how it says certified for 242 and/or best heard with on X-fi and yet it gives these casual BSOD after playing for an hour or so using X-FI ultra high settings. I was wondering what can be done to fix any of the 3 possible issues already said on the topic. Yes I've reinstalled them again and still no go. I only have the drivers instealled, EAX, audio console, volume properties, DTS NEO:6, and GO launcher v5.0. Everything else I got rid of... so if anyone knows of a solution or suggestion please let me know. Thanks. P.S. Was looking around but I don't see a Fatality FPS Champion edition no more. Only Xtremegamer Fatality... discontinued? Problem related issues?

Using latest drivers from Creative v2.9.7 not the June/July update through windows update because it kills the DTS and makes the sound sound all monolike. Ok so here it goes, the driver support says that the latest should've fixed the BF2 crack/snap/pop sounds but I just reinstalled the game recently and I still hear it even with the current version I use so I guess it isn't fixed. 2nd issue is when setting it audio to x-fi with Ultra High, it BSOD's after awhile or so of playing with ha20x2k.sys. Also I get random BSOD's from doing various things such as I could be watching a movie then wanted to play a game or something then a BSOD occurs thereafter with ha20x2k.sys issue again. No this doesn't happen all the time just after my computer has been used for a few days and when I have been listening to various audio's from being a movie or music. On some games it just gives BSOD as if it were random. After a quick reboot I can play the game fine so I just know it's random to the point where it can happen if maybe multiple files with audio are initiated either it being a game and/or movie. And last issue is BF242. I find it funny how it says certified for 242 and/or best heard with on X-fi and yet it gives these casual BSOD after playing for an hour or so using X-FI ultra high settings. I was wondering what can be done to fix any of the 3 possible issues already said on the topic. Yes I've reinstalled them again and still no go. I only have the drivers instealled, EAX, audio console, volume properties, DTS NEO:6, and GO launcher v5.0. Everything else I got rid of... so if anyone knows of a solution or suggestion please let me know. Thanks. P.S. Was looking around but I don't see a Fatality FPS Champion edition no more. Only Xtremegamer Fatality... discontinued? Problem related issues?

New Stream 7 Randomly BSOD

Similar Messages

Maybe you are looking for