New SWCV in my SLD but invisibile in CMS

Hello all,
I've created a new SWCV in my XI 3.0 (SP 21), and i want to transport it to the quality system using th CMS.
But when i am in the landscape configurator of the CMS, in the tab "track data" and i try to add my new SWCV, i can't see it !! Is there any option to do or check ? It's my first time using CMS so i'm a little bit lost !
Thanks by advance,
JP

You need first select the object under this SWVC from your DEV machine and export them from both IR and ID. Then only you will be able to see them in CMS.
VJ

Similar Messages

  • New Technical Systems in SLD, but Database not found

    hi,all
    After i creating a Technical Systems about BW system, the Database missed, especially the database tab of the Technical Systems is grey.
    i've already checked the installation number, database host, msg server, app server, port, but still not work.
    i also try to remove it and create again.
    anything i miss? or how to check step by step?
    any suggestion?
    thx in advance

    Hi,
    Did you updated Latest CR_content  and Cimsap?
    If not download from SAP marketplace and update in SLD.
    Regards,
    Manivannan P

  • Registering a new technical system in SLD - ABAP based

    Hi friends,
      For ,Registering a new technical system in SLD - ABAP based
    I followed the following steps...
    At first
    - went  to the SDL - http://server:port/sld
    - went  to the "Administaton" tab
    - went  to the "Data Supplier Bridge"
    In RFC Gateway
    Server : 
    Service :
    What I to give Here...
    is it the R/3 System  Server and Service
    Please suggest regarding it...
    With Regards,
    Sunil

    Hi Michal,
    Thanks for the Blog. It was really enlightening to find out how the Technical systems are registered. But my problem is not solved yet.:(
    I have newly installed a CRM 2007 system, and tried to see the Technical systems AS ABAP and AS JAVA which should be automatically created. But no AS ABAP system was created. So i tried doing it using your Blog.
    In the Admin tab of SLD, i did  not find any "Data Suppliers Bridge", but there was a "Data Suppliers" tab. On clicking it, i verified that sld/active was TRUE, and then updated the data in RZ70 and clicked on Activate button. The activation was successfully done, but no new AS ABAP Technical system appeared.
    Is there any more configs left to be done? Please help me out with this issue. Thanks in Advance.
    Regards,
    Savan D.

  • Role Name Server defined in SLD but no CimomURL maintained

    Hello gurus!
    We have a problem with our NWDI setup.
    What I want to do is to update an existing track DFODEV02 with the software package EP-RUNTIME.
    I synchronize with the SLD. However when I try to save, I get the following error:
    "SLD (URL http://<NWDI_server>:<port>)
    server exception: Invalid Name Server null - Check SLD configuration -> Role
    Name Server defined in SLD but no CimomURL maintained."
    I am not familiar with the customizing for this but I have looked into a couple of customizing steps related to Data Supplier:
    1) Under administration on SLD I see the following:
    Update Namespaces is marked as sld/active; but
    Update Other SLDs is an empty list.
    2) From the configuration on NWA:
    Target URL: <RuntimeSLD_server>/sld/ds
    Both 'Automatic send' and 'success' are both "true".
    Hope that you can guide us on the right “track” 
    In advance, thank you very much!
    Best regards,
    Elias

    Hi Elias,
    1) Under administration on SLD I see the following:
    Update Namespaces is marked as sld/active; but
    Update Other SLDs is an empty list.
    This is something else, your error message is not about this one.
    What you need to make sure is that you have a name server defined.
    You can check it in various ways:
    A). go to CMS -- Track Data -- select the track in question -- tab Build Variants -- Display/Download the Development Configuration --> This will be an XML file. If you see a tag "sld-nameserver" then you are ok, however I assume this tag is missing or points to a wrong SLD in your case.
    B)
    Go to the initial page of the SLD.
      2.  Choose Landscapes.
      3.  Choose New Landscape…
      4.  In the page that appears, select the landscape type NWDI System.
      5.  Specify NWDI as the name of the landscape. Choose Create.
    The new landscape is displayed.
      6.  Select the new landscape.
    You see the details about the landscape.
      7.  Choose Systems and then choose Add System to Landscape.
      8.  Choose the hosted system type System Landscape Directory. Choose OK.
    You see the installed SLD.
      9.  Select the SLD.
    The details view appears.
      10.  Select the roles Landscape Server and Name Server and save your changes.
    The name server is now known to the NWDI and can be used there. Only now can you create valid development configurations.
    Could you please confirm this way whether you have a name server specified and that points to the correct SLD ?
    I hope this guides you to the right "track"
    Regards,
    Ervin

  • Dependency of SWCV in XI-SLD

    In XI, In Integration Repository, in a software component, i need to use a RFC structure(Imported Objects-RFCs), which is in a different software component,
    so, i created a dependancy between the two software component in the SLD,
    but i could not find the Baisis objects tab in my Software component...
    I m also not sure which type of dependancy i need to apply....so i used all the three.........Build time, installation time and metadata request.....
    what is the difference between them

    Hi,
    so, i created a dependancy between the two software component in the SLD,
    why do u wnat to create dependency between two software components. cant u reimport RFC structure..
    “At build time” describes the context of any build process, like the compilation of sources and the packing of archives. Requirements “at build time” list external resources needed for the build.
    For example, a software component C1 needs software components C2 and C3 to be built. Here, the build of C1 does not work without C2 or C3 to be built first. On the other hand, the build of C1 does not need any other software component, except those required implicitly through C2 and C3.
    “At installation time” describes the context of the installation process. This process may be the first installation or an upgrade to a newer version. Requirements “at installation time” list external resources needed for the installation. The installation includes a basic “getting started”.
    For example, a software component C1 needs software components C3 and C4 to be installed. Here, the installation and “basic usage” of C1 does not work without C3 and C4 to be installed first. On the other hand, the installation of C1 does not require any other software component to be installed first, except those required implicitly through C3 and C4.
    The “getting started” part of the installation is in the responsibility of the software owner. It might include just the start ability or the capability to use some kind of functionality. In each case, the “at installation time” requirements define the minimum preconditions for the installation.
    “At meta data request” describes the context of a process requiring external meta data in an installed system. An example is the content of the XI repository containing the definitions of services and interfaces. The XI content is used by the software components implementing the services and interfaces (in ABAP or Java).
    Regards,
    pradeep A.

  • Do i need a new SWCV and a business system

    Hi Friends
    Do i need a new SWCV and Business suystem for every scenario .
    Let us say i created one file to iDOC scenario with the same sender and same target system
    and now for the same Sender and Reciever i want to create one more scenario which is again a file to idoc
    So for this do i have to do all the stuff in SLD again.
    Thanks

    No you need not create a new technical and business system. You can use the existing technical and business system defined for the same source and target system. You just need to go to the "Objects" tab in ID and add the business system to your scenario.
    As far as technical and business sytem info:
    SLD is based on the CIM model ( Common Information model)
    this model clasiifies the system in terms of SWC, Product, TS, BS to list down....
    TS--> Technical details of the system likeserver name, IP etc....it mostly identifies the system with it's technically ( this gives option to change the TS in future suupose you change the server or its configuration etc)
    BS---> represents the BS usuage identity suppose youa re using the SAP r/3 clnt 100 is sued for develoment activity 200 for QA here the R/3 palys the TS system and 100 200 plays int he Business system....for that particular business wht'a the role of this system......
    Do award points if you feel your query is answered.
    Thanx
    Ravijeet

  • My iPhone 3Gs is now no longer a recognised device on iTunes after I downloaded the new iTunes with iCloud software, but it does recognise my iPad2??

    My iPhone 3Gs is now no longer a recognised device on iTunes after I downloaded the new iTunes with iCloud software, but it does recognise my iPad2??
    I run both Mac and a PC and have iTunes on both, which has previously recognised my iPhone. I had updated my Mac with the new iTunes software with iCloud and updated my iPad2 just yesterday. I then wanted to do the same with my iPhone today, but my Mac wouldn't recognise the device so I tried it on my PC, which recognised the phone but told me I needed to update my iTunes and this in turn wanted to update my iPhone software. After completing all this and restarting, my iPhone now shows the iTunes icon with the USB plug pointing towards it, obviously wanting me to plug it in to my computer to re-connect with iTunes, but now neither of my computers recognise my iPhone and my PC states an 'Unknown Device'. My Mac doesn't even see it. Can anyone help as I really need to get my phone working?? Thanks

    Hold down the Home and Power button for 20 seconds. And try to update again.
    Also read and follow this:
    http://www.apple.com/support/iphone/assistant/restore/

  • I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

    I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

    What happens when the iPod is plugged in?  anything?  any errors?
    Why is 50GB of music gone?  All music should exist on the computer.  Only a fool would rely on a single device which could easily be lost or stolen to store their content on.

  • HT4623 please help!! how can i configure my iphone 3gs because i've been updated a new version i did it but it's hard to activate it again.

    please help!! how can i configure my iphone 3gs because i've been updated a new version, i did it but it's hard to activate it again. this message i always recieved in my iphone
    "We're sorry, we are unable to continue with your activation at this time."

    You phone was hacked. You can not get help with it here. Hacking / Jailbreaking voids any warraty and forfeits your right to support. Discussing jailbroken / hacked devices is forbidden by the terms of service here.

  • I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore.Nothing will load unter the features or charts tab. Any Suggestions?

    I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?

    You would get better response from the iTunes community forum.
    Have a nice day!

  • When a pop up window comes up it is - search bookmarks and history window! I cannot log into my bank as login button should open new window to log in but I get the search page. I cannot see larger images as again I get the search bookmarks and history pa

    When a pop up window comes up it is - search bookmarks and history window! I cannot log into my bank as login button should open new window to log in but I get the search page. I cannot see larger images as again I get the search bookmarks and history page etc. Happens on all options that should open new page. I am so frustrated, this has been happening since Firefox updated itself 2 days ago to Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8 ( .NET CLR 3.5.30729; .NET4.0C) was fine before that. using windows vista. Can you please advise what I should do? Also can you go back to previous version? Error console eg
    Warning: Error in parsing value for 'cursor'. Declaration dropped.
    Source File: https://ib.nab.com.au/nabib/styles/menu_nab.css?id=009
    Line: 116
    ib.nab.com.au : server does not support RFC 5746, see CVE-2009-3555 and Warning: Selector expected. Ruleset ignored due to bad selector.
    Source File: https://ib.nab.com.au/nabib/styles/nabstyle.css?id=014
    Line: 837
    == This happened ==
    Every time Firefox opened
    == 2 days ago after update.

    Do you have that problem when running in the Firefox SafeMode?
    [http://support.mozilla.com/en-US/kb/Safe+Mode]
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this:
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 profession​al. The create new report VI opens Excel but throws error (-21471672​62- from automation open VI) when I try to open MS word. please help...

    I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

    Hi Leo22,
    Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
    Jeremy L.
    National Instruments
    Jeremy L.
    National Instruments

  • I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    Hi j2399123,
    It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
    Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
    For the QuickTime recording options, check out "Recording with QuickTime Player" in
    Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
    http://support.apple.com/kb/ht4024
    And for screen recording specifically, there's
    QuickTime Player 10.x: Record your computer’s screen
    http://support.apple.com/kb/PH5882
    Thank you for thinking of Apple Support Communities for your support needs.
    Nubz

  • I downloaded the new itunes verison,10.7, but it wont let me open it up on my desktop. What do I do?

    I downloaded the new itunes verison 10.7, but now i cant open it from my computer. I clicked on the itunes icon on my home screen but it said i cant open it because a new verison of itunes has been created. What do I do?

    Try resetting ...
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears
    Then try again.

  • In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

    In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
    Thanks

    Hi,
    I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
    Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
    As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
    Best wishes
    John M
    As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Maybe you are looking for