New symptoms since latest firmware update

OK I have a 1tb sky hd box which hasn't had any really annoying issues up until the new firmware update (the one with the new Kids tile which is annoying in its own right).  Anyway, I have been watching the cricket on SS2 and every so often when they break for a short advert between overs I've lost sound when it tries to revert to DD5.1 after switching from 2.0 on the adverts.  I have to change channel and back again to get the sound back.    Also, for the first time, my planner was showing empty today so I had to do a planner rebuild which solved the issue.  Still, at least they  seem to have solved the sound dropout issue.  So just heads up for anyone else with a 1tb box who experiences the same issues.

(Quoting Karl Petersen here:)
There's a bug in iMovie 6 that makes it impossible to re-edit (Update) photo clips previously imported with the Ken Burns checkbox ON. The source photo, normally stored in the Media folder of the project, is (inappropriately) discarded when you empty the iMovie trash. The clips Update as black clips and the preview is usually black too, if I recall.
The workaround is to 1) drag the photo from the iMovie trash to the iMovie Clips pane; or 2) never empty the iMovie trash.
Sue

Similar Messages

  • Mid 2006 iMac Boot Problem (Since latest firmware update)

    I have a Mid 2006 17" iMac. Ever since the latest firmware update in early December, about every other startup I've been having boot problems. After the white screen with the Apple Logo and the spinning wheel it goes to a blue screen like normal, but instead of the 'Loading Mac OS X' white window popping up it stays blue and the spinning loading wheel starts. I've left it loading for quite a while before and nothing changes. I have to do a force shut off by holding the power button. and then I start it up and it will boot normally.
    Any help would be appreciated.
    Thanks!

    Actually, I think it'san early 2006.

  • IMovie Preview Not Working since latest Firmware Update (11/14/2006)

    I was working on an iMovie project without incident until an automatic Firmware update was completed. Since the update, the editing preview function of iMovie is a black screen. The movie plays, but when you attempt to edit the Ken Burns effects, etc ... the preview screen is black so you are unable to edit a viewable screen. Strange ... anyone else - post firmware update issues on the MacBook Pro?

    (Quoting Karl Petersen here:)
    There's a bug in iMovie 6 that makes it impossible to re-edit (Update) photo clips previously imported with the Ken Burns checkbox ON. The source photo, normally stored in the Media folder of the project, is (inappropriately) discarded when you empty the iMovie trash. The clips Update as black clips and the preview is usually black too, if I recall.
    The workaround is to 1) drag the photo from the iMovie trash to the iMovie Clips pane; or 2) never empty the iMovie trash.
    Sue

  • Video iPod keeps crashing since latest firmware update

    This has happened to me several times since the last update. Playing certain podcasts will cause the ipod to crash and reboot. Worst case was today. I had 4 unplayed episodes of the podcast 'Universe Today'. I clicked on one, the iPod crashed, rebooted and when I went back to that podcast directory 3 of the 4 episodes were gone (no longer listed) and the 4th was an empty file. All episodes play properly in iTunes. Very frustrating! Since I don't play games on my iPod, I guess the next step is to restore it to a previous rev.
     20" Intel iMac (2.0GB RAM, 500GB HD + 1.5TB external, 20" Cineama Display)   Mac OS X (10.4.7)   All tools, no talent!

    Hello there Xpectro,
    Thank you for asking your question. It sounds like after you upgraded to Mavericks the computer started quitting unexpectedly. I would start by checking the disk for errors with the Disk Utility and repairing any that are found.
    Disk Utility 12.x: Repair a disk
    http://support.apple.com/kb/PH5836
    If the issue persists or the no errors are found I would try resetting the SMC and performing a Safe Boot in that order.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    The instructions are different depending on the type of MacBook Pro you have.
    and
    OS X: What is Safe Boot, Safe Mode?
    http://support.apple.com/kb/HT1564?viewlocale=en_US
    Starting up in Safe Mode
    To start up into Safe Mode (to Safe Boot), follow these steps.
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key.
    The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
    After the logo appears, you should see a progress bar during startup. This indicates that your computer is performing a directory check as part of Safe Mode.
    To leave Safe Mode, restart your computer without holding any keys during startup.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Macbook problem since latest firmware update

    Really worried about this, have a Macbook 13" Aluminium, I updated to 10.5.7 yesterday with no problems, today though whilst watching a dvd, it just shutdown completely with no warning and now it won't restart at all, the battery was fully charged (on charge at the time) but now there is now power at all, even when the mag adapter is plugged in there is no light to show anything is happening.
    Any help would be much appreciated, thanks in advance

    I am having the exact same problem on my macbook, same model as you.
    I tried using external USB iMic, but still I get get the crackle and pop noises in garageband if the airport is turned on. When I turn off the airport sounds fine but I like to download loops ad sounds from the internet while working in garageband. This is annoying.

  • Since latest ios update, my iphone 6 loses my ringtones. I download new and that's gone the next day too

    Since latest ios update, my iphone 6 loses my ringtones. I download new and that's gone the next day too. How can I get my phone to keep my ringtones?

    Most USB port do not supply enough current to charge the iPad.

  • Internet stopped working on MBA after latest firmware update. Help please!!!

    Internet stopped working after installing the latest firmware update. WiFi still connects to router, our other mac desktop still connects to internet as usual (same network). I can't even re-install the MBA OS since it needs an internet connection!!!
    Any ideas?

    FIXED.
    I swapped our wireless router for a newer one, internet seems to work fine again (we were sent a new one by our internet provider which we never set up until now).

  • Problems Receiving Emails and some data on WIFI since latest software update.

    Problems Receiving Emails and some data on WIFI since latest software update. 
    My blackberry torch will not receive emails on wifi since the latest software update, I've tried numerous wifi networks and several handsets, even had them replaced and received a brand new. Still the same problem. 
    When turning off the wifi network on the torch, the phone will stall for 5-10min while it tries to communicate with the network (vodafone) to receive outstanding emails and data. 
    Can someone please inform Blackberry and get a quick fix on this

    Sounds like you have Do NOt Disturb turned on.
    settings - do not disturb - off

  • HT3728 Does factory reset go back to latest firmware update.

    I have resently updated my airport express to latest firmware. The airport express is configured as an extension to my wifi with an Extreme as main device.
    Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
    I have since then tried to do factory reset several times without getting the device up and running again.
    When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
    I have not been able to discover the express from my iPad, iPone or iMac again.
    Could the reaons be latest firmware update?
    Any advice to get it back to normal?
    Thanks,
    Per

    Does factory reset go back to the latest firmware update.
    A Factory Default Reset will not affect the installed firmware.
    Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
    A solid amber light is unfortunately an indication that the internal power supply inside the AirPort Express is failing, or has failed.
    I have since then tried to do factory reset several times without getting the device up and running again.
    The AirPort Express has failed, and will need to be replaced.
    When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
    This is yet another confirmation that the Express has failed, and will need to be replaced.

  • Attempted Iphone 4 update to latest firmware update "failed"

    Ive attempted to update the Iphone to the latest firmware update  and it has failed 3 times, the final time it looked as though
    it worked but stopped and went into new mode to go-back to Restore to old  setting. Now it is locked up and asking me for the  admin backup password
    and everything I've tried is not working..  Not sure what to do at this point.
    The laptop I'm using is a Panasonic CF29 and running Windows XP with SP3 installed.
    I'm  open to any ideas at this point.
                Thanks Artman

    Then it's pretty hopeless. Normally the error message remains displayed until you click "OK", so it's surprising that you didn't see it. You can try the shotgun approach; just try a bunch of stuff in the hopes that it will work. But first I suggest trying to update it again, and this time watch it. The following list covers the most common causes of update failures:
    Open a Command window and type the command "netsh   winsock   reset"
    Reboot your computer
    Disable your antivirus and firewall
    Launch iTunes
    Connect the phone using a USB port directly on the computer, not a hub
    When the phone is recognized in iTunes click on it, then click Restore
    If the phone is NOT recognized in iTunes, disconnect it, the hold the HOME and SLEEP buttons for exactly 10 seconds until the screen goes black, then release SLEEP but continue holding HOME while you connect the cable and continue holding HOME until iTunes recognizes a phone in recovery mode
    If the update completes you are in business
    You mentioned being prompted for a backup password. If your backup is encrypted you will need to know the password to complete the restore; if you don't know it you will have to restore as New and manually add your content back. If it is encrypted you really did enter a password for it once, whether you remember doing so or not.

  • Zen Touch latest Firmware Update...player not connec

    I tried installing the latest Firmware update for my Zen Touch (released 2-09).
    The player is connected and recognized by Windows and the Media Explorer. However, when I try to install the new Firmware it keeps saying "player not connected".
    I tried d/l two different language packages cause I wasn't sure what counted - player language or operating system langauge. Anyway, that didn't make a difference.
    So what do I do? I have no idea where to start. It's firmware for the correct device connected through Windows XP.
    I have made a firmware update before, which worked fine. After that I updated the media explorer software.
    Help is very much appreciated! Thank you in advance.
    -tina-Message Edited by tinas on 2-0-2005 08:56 PMMessage Edited by tinas on 2-0-2005 09:00 PM

    Perhaps it's worth making sure no software is using the player, so reboot the PC, and turn off the Creative Detector. Then try again.
    Are you trying to upgrade to the .0.03 version?

  • Can't send mail after latest firmware update

    My outgoing mail won't go out after the latest firmware update. I have 4 different accounts and none are working. Tried in various locations. Any ideas would be appreciated. Thanks

    Was this for 10.5.8???
    Others have reported it for 10.6.8 & up...
    http://x704.net/bbs/viewtopic.php?f=12&t=6118

  • Since latest Firefox update, other web sites will load but Netflix will not. Netflix will load in Internet Explorer.

    Since latest Firefox update, other web sites will load but Netflix will not. Netflix will load in Internet Explorer.

    Does it matter whether you use www? Will the sign-in link open: https://signup.netflix.com/#do-login
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    1. Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server. Any difference? If not...
    2. Clear Firefox's Cache Completely
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    3. If needed, remove the site's cookies in this dialog
    While viewing a page on the site, right-click and choose View Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?

  • My macbook pro screen remains grey after latest firmware update

    i just had the update notification for the latest firmware, proceeded to do so, and the screen remains grey, its been more than one hour and still grey, since its a firmware update i don't want to disturb it, but could it be that is taking so long?

    Reboot it by pressing the power button down hard to force a shutdown.
    If your still having problems, take it to Apple. I hope you have AppleCare becuase if they can't fix it, it's a new logicboard.

  • Latest firmware update and more problems with 30" external displays?

    Hello,
    New macbook pro user since a few weeks, so first post here.
    I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
    I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
    Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
    It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
    Is anyone else in a similar situation after the latest update?

    Hello,
    New macbook pro user since a few weeks, so first post here.
    I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
    I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
    Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
    It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
    Is anyone else in a similar situation after the latest update?

Maybe you are looking for

  • Half of RAID 50 missing

    I have a fully populated 14 disk RAID, formatted as RAID 50. Both partitions show in disk utility, but only the other half shows as missing part of the RAID 0 set. Simply, I only see one slice when I should see two. So the volume doesn't mount, obvio

  • Mysql linked server queries

    hello everyone, after spending most of the day trying to figure this out i hope that you guys with more experience can provide some suggestions. i have been experimenting with the a linked server (MYSQL 5) and managed to get all the select queries to

  • Cache Question

    Hello all, I am not new to working with java (not writing it, just supporting it), but I'd like to know a little about this: I am currently working with a Java applet displaying TIF images that have been uploaded from another server. My question is a

  • Install Oracle8 client in silent mode under windows environment

    I would like to know how can i install Oracle8 client in silent mode under windows environment. I would appreciate a prompt reply on this

  • Oracle 9i Certification

    Hi: I had a quick question regarding the Oracl9i Certified Database Associate Certification, as I found conflicting information in the Certification Section. My question is: Can we replace EXAM#:1Z0-007 (Introduction to Oracle9i:SQL) with EXAM#:1Z0-0