New Sys with CS5.5 and CS4

Contemplating installing both CS5.5 and CS4 in a new sys, because I haven't been able to import a CS4 project into CS5.5 successfully. I use Magic Bullet Looks quite alot. After I install both 5.5 and 4, I'll install MB Looks. I also use a BlackMagic Design I/O card, which installs its presets in the Premiere Pro plugins folder.
Question: When I install MB Looks and the BMD driver/software, will they find and install their stuff in the right CS5.5 and 4 folders? Or, will it require I do a second install to make certain both 5.5 and 4 are covered?
Thanks,
Bill

Thanks Todd
MB Looks does in fact have an installer for CS4 (1.3) and earlier and one for CS5 (1.4) and beyond. I installed both, one right after the other, and each found their way into the appropriate CS4 and CS5.5 folders.
The BMD installer covers both 64 and 32 bit, and installed sucessfully in both CS4 and CS5.5 folders. So, all is well.
Bill

Similar Messages

Can't open print settings with CS5 and Epson R1900

In Photoshop CS5, go to File > Print. In the Print dialogue window, click on Print Settings... and no response. The blue Print button in the lower right corner flashes when I click, but nothing else happens.
I've tried running Photoshop in 32-bit mode as well. Doesn't behave differently.
Running on a Mac Pro 2.26 GHz (most current generation).
12 GB RAM
OS 10.6.4
Printer is connected to Airport Extreme USB (most current generation).
Can successfully print with CS4; seems to be a new issue with CS5.
Hope I've included enough info to troubleshoot this problem.
Thanks for any help!
Brian,.

I've been trying to trouble shoot this problem since the beginning of September. I wasn't sure if it was a snow leopard issue, a Driver issue, or a CS5 issue. I guess it's CS5. I recently discovered the work around of asking Photoshop to manage the colors, opening the print settings, saving, then returning to printer managing colors but this just doesn't cut it in our graphics lab. We need the settings to be as straight forward as possible for our students.
Also, unrelated sort of, Photoshop remembers the settings from the previous print job. Which again doesn't work well in a lab/public environment. So if jimmy printed 20 copies of a file and set it to print colors as gray; Susie, the next in line, would have the same print settings for her file. This seems to only happen with photoshop. Not Preview, not safari, nor any other program.
We're seriously considering moving back to CS4.
...at least that had contact sheets.

Photoshop cs5 and cs4, photoshop help...f1 why online

Hi
i have installed on w7 photoshop cs5 and photoshop cs4
well when i try to read the manual (the help files) clicking F1 or under the menu Help-> Photoshop Help F1 ,photoshop cs5 and cs4 connect to the net
for example cs4 opens a firefox page with the help guides
cs5 opens a windows connected to internet
for example i need to know some shortcut and i have to be connected to the net
that's weird
is there a way to use the offline help? like cs3
thanks

You can download the help files as a PDF from the Photoshop Support pages.
If you want to access the offline help files from F1, you have to disconnect PS from the Internet.
If you want to turn off Community Help so that local Help opens by default, do the following:
   1. Open the Connections panel (Window > Extensions > Connections).
   2. From the Connections panel menu , select Offline Options.
   3. Select Keep Me Offline and click OK.
Note: When you disable web services from the Connections panel, all other web services (such as Adobe Kuler and Adobe ConnectNow) are also disabled.

How come I can't put music on my ipod? I already have a fair amount of music on my ipod but I have enough space for more. I am using a new computer with itunes and it is telling me if I wasnt to put the new music on my ipd i need to erase my ipod HELP!

How come I can't put music on my ipod? I already have a fair amount of music on my ipod but I have enough space for more. I am using a new computer with itunes and it is telling me if I wasnt to put the new music on my ipd i need to erase my ipod HELP!

Because you can only synce with one iTunes library and you are switching libries by using the new computer. To nake this yyour syncing computer:
- Move all the media(apps, music, synced video and photos etc) to the new computer.
- Connect the iPofd yo the computer and bake a backup fo the iPod by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup.
Note that the backup that iTunes makes doe not include media.
To move mdia to the new computer see:
iTunes: How to move your music to a new computer
iTunes Store: Transferring purchases from your iOS device or iPod to a computer

Hello! I have a printer,Canon MP250 and I bought a new MacBookPro with Maverick and I cannot work this printer

Hello! I have a printer,Canon MP250 and I bought a new MacBookPro with Maverick and I cannot work this printer with the driver that came with the printer and I've tried to find an update but with no success, can you help me?
Thanks!!

you can try resetting the network settings in settings or you can try doing a reset - hold down the home/power button together until you see the apple logo and then release. Then wait for the phone to boot back up. You won't lose any data.

Just got my Mac air and i would like to make a file to store some web addresses for my new business with rodan and fields and I can't do it. Made the file but i cant copy and paste the web addresses in the file to save them. Please help and thank you.

Just got my Mac air and i would like to make a file to store some web addresses for my new business with rodan and fields and I can't do it. Made the file but i cant copy and paste the web addresses in the file to save them. Please help and thank you.

Yes - well you have to make the file in a word processing Application.
You could use TextEdit (it's free) Pages (words only), or Numbers (data base) (they are part of iWorks - and may or may not be free (included) on your machine. You could use MS Office (it is not free) You could use any Open source word processor that plays well with Office (NeoOffice, StarOffice) they are free.
That's how you create content and copy/paste URLS. Then you save the file to the desktop. If you are going to make more than one file... you make a folder on the desktop and save, or drag the file(s) into it.
You attach it to your e-mail client which will compress it and e-mail it. An excellent reference is to use Help, from the menu bar, also from inside any application. From your library or book store the OS X for Dummies has a lot of useful information (you don't read it cover to cover but look up chapters about what you'd like to do)
You can also make appointments at your local Apple store for individualized help (if a store is nearby)

Buy new computer with Yosemite and downgrade to Mountain Lion?

Is it possible to buy a new machine with Yosemite and instead somehow downgrade/revert to Mountain Lion? There's a program I like to use that is no longer updated by the developer and isn't terribly stable on the latest two releases of OS X...

No, except by running it inside a program such as VirtualBox, Parallels Desktop, or VMware Fusion.
(121170)

I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?

I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?

Also, if you can't get them to work, what is the error message you are getting?
Baron Samedi

I have apps in my notification center on for notifications (like News apps), with banner and sounds, but i never get the notification from those apps. I tried reinstalling the app and restarting the phone but all in vain

I have apps in my notification center on for notifications (like News apps), with banner and sounds, but i never get the notification from those apps. I tried reinstalling the app and restarting the phone but all in vain

The apps I currently have are for the i phone and i pad but i would like to see this on this computer
On the Mac Air launch iTunes. Then connect either the iPad or iPhone.
Select the iPad or iPhone under Devices left side of the iTunes window in the source list.
Then select Apps from the menu on the right.
If you don't see the apps listed there, from your iTunes menu bar (top of your screen), click Store > Authorize This Computer.
See if that makes a difference...

If i replace my iphone5. will i get a new iphone5 with box and all new accessories?

if i replace my iphone5. will i get a new iphone5 with box and all new accessories?

Vague.
If you buy a new on , then yes you will get all of that.
If it is replaced under warranty, then no. You will get a service unit, could be a refurb, with no accessories - you need to keep everything but the iphone itself when you have it exchanged.

Printing problems with CS5 and Epson Photo R2880 printer

I'm having problems getting good prints when using Photoshop CS5 with my Epson Photo R2880 printer, problems I never had with CS4. Here's the situation:
If I take a PSD file and print it using CS4, everything works out perfectly. But if I take that same PSD file and print it out using CS5, the print is now offset top to bottom, as well as left to right, along with a 1/8" black strip being printed down the right edge of the paper. As far as I can tell, everything is set the same.
I've compared all the print information found in the Print dialog summary box between CS4 and CS5 and everything appears to be the same. I've verified that I'm using the latest print driver with my printer, and I am. It's 8.27. I've verified that I've checked off the box to center the print to the paper, each time I've made a print. And in trying to figure out what's going on, I've discovered that this problem occurs with any paper size when using CS5, but not with CS4.
I'm stumped and frustrated and without any more ideas as to what I should do next, except to always print my projects using CS4. If anyone has an idea for me, please let me know! Thanks!
P.s. I'm new at using this forum, and though I thought I sent this out once already, I never saw it posted. If I'm in error and it's already out there, sorry for the mistake and posting it twice.

>"Unfortunately then I'd have to say all bets are off. The only true test is to print with the standard materials that Epson has designed their printer for. Only if that works well should you be trying third-party materials. For example, third-party inks in general are of poorer quality, are inconsistent, clog more, and in the long run, do not save you anywhere the amount of money they advertise over the genuine Epson products."
Getting very nice results with an R1800, Inkjetfly CIS, and Red River paper. The R1800 has never had Epson ink run through it and has no abnormal clogging problems. In fact, clogs are rare.
Getting near perfect matches to the monitor with both Colorvision and x-rite calibrating/profiling equipment. The printer stays on 24-7 so the only ink used, other than printing, is a periodic nozzle check. I am not alone in this, so blanket statements like the above are specious at best.
And no, I don't sell prints for big bux, so whether they are going to last a hundred years is not a concern. Besides, until someone is around long enough to verify those claims, the jury is out. I've got color prints from the wet days that are fading after 20+ years. Third party inks are not necessarily lower quality than OEM. One of the reasons for the development of high quality third party inks was the dissatisfaction of B&W and fine art printers with the OEM products.
Of course the cheap refilled/knockoff carts being hawked on ebay and the like are a different story.
MBP, OS 10.4.11, CS3 10.0.1, R1800 with latest driver

Windows 7 Firewire Issues with CS5 and ADVC-700

I've got a Windows 7, 64 bit system with CS 5. In dubbing out for playback, I route a firewire cable from the PC to an Canopus/Grass Valley ADVC-700. Both units are less than a year old and are having issues with "black outs" during the dub out process. I've read different things about Windows 7 having issues with firewire drivers. After speaking to someone with Adobe, I've changed my firewire driver to Legacy. That hasn't helped.
The ADVC-700 has s-video out running to preview monitor and BNC out/XLR audio running to my playback system for ingest. When the video goes to black (usually for a 1/2 second), the audio drops out with it.
I've reset the settings on the ADVC-700 with no luck.
Any suggestions on a fix or something else to try?

I did test with a JVC GY-HD200U and there weren't any performance issues which led me back to the PC or other on the PC.
The system is running Windows 7, 64 bit with CS5 Production Premium following an upgrade from the CS4 version.
I've got 12 GB of Ram, (2) Intel Xeon Quad Core E5560 -2.8 GHZ processoCrs.
(1) 500GB SATA2 hard drive, 7200 RPM, 32 MC (System Drive)
(3) 1 TB SATA2 Hard drives, 7200 RPM, 32 MC (3 TB, RAID0 Storage Drive)
Nvidia GeForce 9800GT graphics Card
Supermicro X8DAi motherboard, Intel 5520 Chipset, 2-PCIe X16, 1 PCIe x4, 3-PCI, 10-USB2 ports, 2-pro/1000 NIC, 8-channel HD audio, 6 SATA ports, RAID 0/1/5/10
I've got the legacy drivers for the firewire card. I've checked to make sure all of the power save options are off along with all screen saver options. I've cleaned my Adobe Cache out, deleted my Adobe Preferences, went from the 4pin/6pin cable to a 6pin/6pin cable to feed the ADVC-700 from the PC, reset the ADVC 700 back to factory specs...all of this with no luck.
The problem seems to be worse since the move from CS4 to CS5 but it's hard to tell.
I've also hooked up an older ADVC-500 unit with the same output results.
I think I noted in the first post that this is happening on two indentical systems with the same cabling and programs and the same ADVC-700 boxes.
I've been told by Adobe to clean my C; drive and reload the OS and Adobe CS5 as I should have done that when I upgraded instead of just upgrading the system from CS4 to CS5 using the discs. I haven't done this yet as I have to budget time/workflow to accomodate.

Pressure problems with CS5 and Cintiq 12WX

So I have Photoshop CS5 and a Cintiq 12WX. I use 64bit and Win 7. When I'm drawing, at what seems to be random times, the pressure will turn off. It might work the next time I draw a line or after the 7th or 8th time.
I don't remember this ever happening with any other programs (including CS4) so I'm guessing it might well be CS5 to blame for this more than the Cintiq. Does anyone have any experience with this? Could it be something clashing causing the sensitivity to turn off?
Thanks for your time.

There is a known issue with the very latest Wacom driver for the tablet.
Most people find that visiting the Wacom site and downgrading to a slightly older driver alleviates the problem you're reporting.
At the moment, owing to search problems I'm unable to find the specific thread here that identifies the version you need. I think it was something like 6.1.5.
-Noel

Intel hd graphics 3000 not working in after effects cs5 and cs4

Hi I am running after effects cs5.5 and when importing 3d objects the programs keeps on crashing. in the preferences the graphics is not recognized. I also have Photoshop cs5 and it works fine in that and it recognized, both are 64bit. Does any one have any solutions.
proccsor Intel i5 2500k
thanks

Could this be fixed with updates from adobe as a lot of the newer computers with i3 i5 and i7 processors come with Intel hd graphics 2000/3000

Problems with iMac and CS4

Hi out there! I`m a sales-person at an Apple-Premium-Reseller in Austria and I`m having troubles with a customers iMac (27'', 3,06GHz, 6GB Ram, ATI-HD4670 graphics with 256mb) running CS4. The problems are mainly when using Indesign. For example if I have a 4-page document with a few layers/transparency and i go to overprint-preview, it takes very long for it to load the images/preview, and when I move the pages they sometimes freeze/jolt when moving. If its a lager document (the customer is a graphic designer, often has to deal with 60+ pages and more, so thats a bit annoying) its even worse.
Since the hardware is a relatively new iMac with 256MB graphic, I assume that there's a software issue. Its runnign MacOs 10.6.5, I did all updates on both Mac and Adobe.
Has anyone heard about similar problems? Could it be that the graphic-card in this iMac is to weak?
Please help

What sizes are the images? "Overprint preview" pulls on the full resolution of all images. If they are hefty, it would be no surprise that the computer is bogging down.
There is an InDesign forum here that may offer more assistance.

New Sys with CS5.5 and CS4

Similar Messages

Maybe you are looking for