New System Autentication

Hi All,
If connected my SAP ERP Development system to Business Objects. In SM59 the connection test is OK, and in /CRYSTAL/RPTADMIN also OK.
Now the problem is that I want to connect the Productive system, that is locates in other server, diferent from the development system. I've changed the values in the registry (regedit) to meet the new system informations. But when trying the SM59 Connection Test, it returns the following:
Logon     connection error
Error when opening an RFC connection
ERROR: Struture connection to port conv.SAP failed (port conv.SAP
LOCALIZ.: SAP-Server svsapprderp2_PRD_01 on host svsapprderp2 (wp 1)
COMPONENT: CPIC
CONTAD.: 132
MODULE:
LINE:
CÓD.RETORNO: 236
SUBRC: 0
RELEASE: 701
TIME: Fri Jun 11 16:03:23 2010
VERSION:
Can someone, help me on this?
Kind regards,
Miguel

Hi Ingo,
I'll try to explain better this time.
In one of the systems, I could create the RFC destination in SM59, and the connection test as been sucessful.
Then I tryed to do the same thing (create the RFC destination) in the other two systems (Productive and Tests systems). In SM59 the connection test is not working, returning the initial reported error.
I will show you the configuration information used to the systems:
DEV (the one that is working fine):
Program ID: SVSAPBO_PUBLISH
Host Gateway: svsapdeverp1.sapdom.internal.inatel.pt
Gateway Service: 3300
PRD (Productive system one of those that are not working):
Program ID: SVSAPBO_PUBLISH
Host Gateway: svsapprderp1.sapdom.internal.inatel.pt
Gateway Service: 3300
TST (Tests system one of those that are not working):
Program ID: SVSAPBO_PUBLISH
Host Gateway: svsaptsterp.sapdom.internal.inatel.pt
Gateway Service: 3300
Is it clear now?
Thanks in advance,
Miguel

Similar Messages

  • How do I prepare my iMac for sale? And best practice for transferring media to a new system.

    This is my first time posting in a forum, so I will apologize in advance if I'm doing something wrong. I've tried to search for a very clear answer to my questions in the existing discussions, but have not had much luck.
    I ordered a Macbook Pro today and would like to sell my current iMac to supplement some of the cost. I purchased my iMac in March of 2011 with OS X Snow Leopard preinstalled. I've since updated to Mountain Lion. When my computer came in it did not have OS DVDs, so I am not sure exactly how to take it back to factory default and remove ALL of my information safely in order to prepare it for sale. I'm afraid to tell it to format if I am going to need a boot disc/drive to reinstall the OS. I've been trying to research all day and have learned that I will not be able to sell it with the current OS, only the one that came with the computer at the time of purchase (to the best of my understanding).
    Secondary to all of this, I have a question about backing up info and porting it to my new system. I have run the Time Machine backup to my external hard drive. However, I DO NOT want to port it to my new MBP as an image of my past machine. I did that when I got my iMac from my old MBP and my iMac thinks it is a MBP (MBP EFI/SMC Firmware Update Icons in my system utilities folder as well as identified as a Macbook Pro on my network). I've never been able to get all of these things to go away and I feel like it's chewing up hard drive space for no purpose whatsoever. I also worry that it could create system issues that I'm just not savy enough to catch before they are beyond control. That being said, I'd like to begin fresh with my new MBP. What is the best method of bringing my photos from iPhoto and music/movies/books/etc from iTunes to my new system? My word documents are easy enough...I keep 3 flash drives updated with them at all times.
    Thanks in advance!

    Whoever said you can't sell you iMac with the current Mac OS X is wrong, I believe.
    Unfortunately, it is not wrong.
    Any OS purchased/obtained at the app store - as is the case here - is not transferable. The license is tied forever to the Apple ID used to obtain it. The SLA states that the seller needs to erase the drive and reinstall the original system.
    @ Kamikazwe:
    You can call Apple and give them your serial number and they will send you copies of your original disks at a nominal charge.
    You do need to use your original Snow Leopard disk, boot from it, erase the drive, and reinstall Snow Leopard. The buyer of the machine will need to purchase his/her own copy of Lion or Mountain Lion with their own Apple ID or they will never be able to reinstall or update the OS.
    SLA Excerpt:
    3. Transfer.
    A. If you obtained the Apple Software preinstalled on Apple-branded hardware, you may make a one-time permanent transfer of all of your license rights to the Apple Software (in its original form as provided by Apple) to another party, provided that:  the Apple Software is transferred
    together with your Apple-branded hardware; (ii) the transfer must include all of the Apple Software, including all its component parts, printed materials and this License; (iii) you do not retain any copies of the Apple Software, full or partial, including copies stored on a computer or
    other storage device; and (iv) the party receiving the Apple Software accepts the terms andcconditions of this License. For purposes of this License, if Apple provides an update (e.g., version 10.8 to 10.8.1) to the Apple Software, the update is considered part of the Apple
    Software and may not be transferred separately from the pre-update version of the Apple Software.
    B. If you obtained your license to the Apple Software from the Mac App Store, it is not transferable. If you sell your Apple-branded hardware to a third party, you must remove the Apple Software from the Apple-branded hardware before doing so, and you may restore your system to the version of the Apple operating system software that originally came with your Apple hardware (the “Original Apple OS”) and permanently transfer the Original Apple OS together with your Apple hardware, provided that:  the transfer must include all of the Original
    Apple OS, including all its component parts, printed materials and its license; (ii) you do not retain any copies of the Original Apple OS, full or partial, including copies stored on a computer or other storage device; and (iii) the party receiving the Original Apple OS reads and agrees to
    accept the terms and conditions of the Original Apple OS license.

  • Portal Runtime Error while creating  new system in portal content

    Hi
      Can anyone  solve my problem, i am geting error while creating new system in p ortal content
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
    Component Name : com.sap.portal.admin.templateselectionwizard.default
    com/sap/portal/iviewserver/cache/OClass.
    Exception id: 11:29_26/12/06_0014_5891950
    See the details for the exception ID in the log file

    Hi,
    Check this link for creating system object
    http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
    Regards
    Arun

  • Setting up a new system

    Hello everyone,
    I'm setting up a new system and would appreciate any comments on the components I've selected:
    (the idea is to have a mid-range system, with room for upgrades in the future). thanks!
    CPU
    Overclocked Intel® Quad Core i7-3820 (3.6GHz @ max 4.4GHz)
    Motherboard
    ASUS® P9X79 PRO: INTEL® SOCKET LG2011
    Memory (RAM)
    32GB KINGSTON HYPERX GENESIS QUAD-DDR3 1600MHz X.M.P( 4 x 8GB KIT)
    Graphics Card
    2GB NVIDIA GEFORCE GTX 650Ti BOOST- 2 x DVI, HDMI, - 3D Vision Ready
    1st Hard Disk
    120GB KINGSTON HYPERX 3K SSD, SATA 6 Gb/s (upto 555MB/sR | 510MB/sW)
    2nd Hard Disk
    1TB WD CAVIAR BLACK WD1002FAEX, SATA 6 Gb/s, 64MB CACHE (7200rpm)
    3rd Hard Disk
    1TB WD CAVIAR BLACK WD1002FAEX, SATA 6 Gb/s, 64MB CACHE (7200rpm)
    4th Hard Disk
    2TB WD CAVIAR BLACK WD2002FAEX, SATA 6 Gb/s, 64MB CACHE (7200rpm)
    Power Supply
    CORSAIR 850W PRO SERIES™ HX850-80 PLUS® GOLD MODULAR
    Processor Cooling
    Corsair H80i Hydro Series High Performance CPU Cooler
    Case
    COOLERMASTER CM690 MKII ADVANCED CASE

    I would not suggest raising the base clock to OC on that CPU. You may want to stop at 4.3GHz. That base clock frequency effects more than just the CPU.
    Eric
    ADK

  • New System - No POST, No Beep Codes

    Hey guys,
    So I built a new system last night, powered everything on and everything seemed to come on as expected but there was absolutely nothing on the screen.  The system MIGHT be posting properly because I see the keyboard lights flash when I first turn it on, then the Numlock light stays on as normal.  Also, when I press the numlock key it toggles the light as it should, and a ctrl-alt-del on the keyboard seems to reset the system as well (fan speeds change and lights blink just as they do when pressing the actual reset button on the case).  Additionally, when I had the drives connected it sounded like it was checking them looking for something to boot (even though the hard drive is blank right now).  However, I'm not sure that they're just making noise simply because they have power and are doing things like spinning down after not being used for a minute or two.
    There are no beeps or alerts coming from the motherboard that I can see/hear.  I also disconnected all the drives to see if that helped, but it was still the same thing.  I have not yet tried to take the mainboard out of the case and running it with only CPU/RAM/video; I plan to try that tonight as a next step.
    I'm guessing that this means there is something wrong with the video card, but I'm not 100% sure, and wanted to see if others had ideas before I try exchanging the video card.  Unfortunately I don't have another PCI-E system that I can simply test the video card in.
    This motherboard should beep if it detects a problem, correct?
    Are there any LEDs on the board that could help me diagnose something?  I don't think it came with a D-bracket.  There are the 4 CPU_Phase LEDs on the board, and I believe two of them are lit up while it's running, but I'm not sure how to interpret those LEDS.  Anyone know what exactly they indicate (more than what the manual says, which is just that 2, 3, or 4 lights indicates that the CPU is in 2-phase 3-phase, or 4-phase power modes).
    Am I correct in assuming that since the lights on the keyboard seem to behave as normal and that ctrl-alt-del works as normal that the motherboard is probably okay?
    Any other ideas or suggestions?
    Thanks!

    You can try to clear CMOS and try out with another video card.

  • New system for CS5.5? Some advice please?

      Hi- I am getting a new system built specifically to work with Production Premium CS5.5.
    I'm afraid I know next to nothing about hardware!
    These are some specs that the guys in the shop said would work?
    Do you have any comments- will it work? Any better suggestions?
    Many thanks
    scott
    Gigabyte GA-X58-USB3 Intel X58 Socke1t. 0103 66 on1b5o0a.r00
    Intel Core i7 950 3.06GHz Socket 13616. 080M B Cac2h3e2 .R00
    6 x Corsair Vengeance 4GB DDR3 1600MHz/P6C.30-01 2800 M3e0m.o00
    2 x Western Digital WD20EARS 2TB Hard Dr2i.v0e0 SATAII7 85.400
    COOLERMASTER RC-502 CENTURION 5 II M1I.D0I0 TOWER 6C0A.S0
    OCZ MODXSTREAM PRO 600W SILENT SLI, 1A.T0X02 MODUL6A6R. 00
    XFX Radeon HD6770 1GB GDDR5 PCI-E 2.11. 0G0r aphic1s1 2C.a00
    MS WINDOW 7 HOME PREMIUM 64-BIT 1PK 1O.E0M0 85.00
    LG BLU-RAY 10 X LIGHTSCRIBE BDRW I1N.T0E0R NAL RE7T2A.I00
     

    There are several major problems with that build:
    1) The two WD Green hard drives are too slow for video editing. They spin at only 5400 RPM, not 7200 RPM.
    2) The i7-950 and X58 combo is about to become obsolesced by the new LGA 2011 Sandy Bridge-E platform with the X79 chipset.
    3) Adobe Premiere Pro CS5.x still does not support OpenCL GPU acceleration at all. In fact, the GPU accelerated mode requires an Nvidia CUDA GPU with 896MB or more VRAM in order to even work at all. As a result, the ATi GPU-equipped systems will run CS5.x only in software-only MPE mode, which is much, much slower than the GPU accelerated mode. In other words, the HD 6770 will be equally as slow as integrated motherboard graphics (as far as performance in CS5.x is concerned).
    4) Windows 7 Home Premium will not see anywhere near the full 24GB of RAM. In fact, that OS is capped at 16GB of RAM total. You will need Windows 7 Professional or Ultimate in order to use more than 16GB of RAM.
    5) That 600W PSU is nowhere near powerful enough to run a video editing system of this class. In fact, that OCZ PSU is not even that good quality-wise. You will need a reallty good quality 750W to 850W 80-Plus Gold rated PSU.
    In other words, the guys in the shop know little to nothing about the stuff that they sell.

  • New system with Neo4 Platinum doesn't work at all!!!

    Hi guys,
    I bought my new system:
    1 - AMD Athlon 64 3200+ Core Venice
    2 - MSI K8N Neo4 Platinum /BIOS 1.1
    3 - RAM S3+ 1GB (2x512 MB)
    4 - Western Digital Caviar SE 120 GB SATA WD1200JD
    5 - Hitachi Deskstar 80 GB SATA II HDS728080PLA380
    6 - NEC 3500AG DVD-RW
    7 - Albatron 6600GT 128 MB PCI-E
    8 - Enermax Noisetaker 485W
    Where is the problem?
    It's IMPOSSIBLE to install the OS.
    I can't install Windows XP, I can't install Windows 2000, I can't install Windows 98.......
    When I try to install Windows (no matter what version) the system tell me that it CAN'T read or write some file from the CD to the HD.
    No matter what files it is, once it's the shell32.dll...... another installation it's the file ntdll.dll....... another time the file riched20.dll....... another time it's the file "whatTHEhell!" and so....
    I tried to connect one only HD, I tried to connect the WD and the same. I tried to connect the HITACHI, and the same.
    I tried to connect my HD to SATA 1, 2, 3, 4 on nVidia controller, and the same.
    I tried with the Silicon Image controller and nothing changed.
    I tried to change the optical drive, I connected my old ASUS CD 50x and disconnected the DVD Writer, but the same.
    I've started to think that this could be a cable issue, then I changed the IDE Cable and the SATA cable... but nothing.
    I flashed the bios from version 1.1 to 1.4 with the support to Venice core, the same.
    I also disconnected my SATA HD and I've plugged in my old PATA HD, an old Samsung 6,4 GB HD............... BUT NOTHING!
    I can't imagine nothing more to do to solve the problem, but I'm listening for your advices.
    Thank's.
    elem

    Quote from: Supershanks on 05-June-05, 19:23:35
    hi elem,
    Type of floppy i meant was 1 with a usb componenent like:-
    Mitsumi FA404M 1.44 Silver FDD+Int USB2 7 in 1 Card Reader so if it's just a n ordinary floppy i'd plug it back in.
    I'd try 3) Memtest86+ run it as decribed in the link to verify your memory isn't the issue.
    luck
    Yes Supershanks and blazing storm,
    I misanderstood, but now I reattached my floppy and performed a full scan of my HDDs
    with their own diagnostic tools, downloaded from the Western Digital and Hitachi websites.
    I choosed the DOS version that make a bootable floppy disk and verified the drives.
    The HDDs are working fine and there's no errors on the surface, the HDDs are ok.
    Quote from: SAB on 05-June-05, 19:35:43
    Try swapping the optical drive that you are loading the O.S. from. Make sure SATA controller AND SATA ports are enabled. Make sure IDE controller for floppy is also enabled. Perhaps your optical drive has one piece of dust on just the wrong place. That's all it takes to throw one of those things off!!!
    SAB, I've tried to swapping my optical drives yet. I've tried a DVD-RW NEC 3500 AG, then a CD Player from ASUS, then a CD-RW from LITEON.
    The same problem with the new system, but these are performing very well on my old pc, then these aren't the problem.
    I think the problem could be only on CPU, or MOTHERBOARD or MEMORY.
    Thank's Supershanks, I'm downloading MemTest86+ for a memory scan.
    I'll let you guys to know as fast as possibile the results!

  • New system recommendations and suggestions

    I am in the market (finally) for a new system, and even though I had issues with my old MSI 975X Platinum PUE at the end, it served me well for over 6 years, so I'm pretty much sold by MSI.
    This is what I am looking at right now, but I would like to know if there are known issues with the compatibility/functionality of these components:
    -MSI Z87 MPower MAX
    -Intel i7-4770K CPU
    -Corsair Vengeance 16G (2x8G) RAM - (I may bump this to 32G)
    -MSI GeForce GTX 760 2G DDR5 Video
    -UltraX4 Extreme PSU
    -Win7 Ulitmate 64Bit
    I will also be getting another smaller (500GB) HD to use just for the OS and my VMWare items in addition to the 1.5T and 1T drives I have now.
    Another question I have is that the CPU comes with a stock fan.  Will this be sufficient or should I be looking at something else?
    And being that my budget is around $1000 - $1200, is there something better you can recommend that will match the performance of what I selected?
    Thank you

    For your needs, I see no reason for 32GB of RAM. You don't want to mix two kits anyway even if they have the exact same part numbers. They may be from different batches or even have different chips on them. On my Z87, I am only using 8GB of RAM and having no problems.
    Great choice on that CPU cooler! All my rigs have 9900's on them. They do outstanding and have helped me attain some impressive OC's using them. 
    The Corsair HX850W is what I use as well. Excellent PSU! 
    Probably one port is DVI-s and the other is DVI-d? The BIOS will probably recognize the discrete card is installed and set the graphics automatically to PEG mode.
    A word of caution though. The GTX 760 may need a Legacy VBIOS to work right out of the box. If that happens, a UEFI/BIOS update may help or the VBIOS will need to be flashed. The onboard graphics can be used in the meantime to get the flashing done and the GTX 760 taken care of if it needs it. That is why some of us recommended the GTX 6xx series. They usually don't have any problems out of the box.

  • I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I d

    I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
    Thanks for your help.
    George Kyaw
    <Email Edited by Host>

    I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
    Thanks for your help.
    George Kyaw
    <Email Edited by Host>

  • How do I install a new system file to replace the damaged one

    I am tring to repair the permissions on my computer and am getting all of these types of errors. Computer is dragging. I reinstalled my operating system and this is what is happening. Any suggestions. Happening on my desk top I Mac and on my Mac Book. I did google search and Error 23 is "These errors indicate that the Mac tried to access one of the standard routines in the system file and couldn't find it. In all probability, that means you have a corrupted system file. Try installing a new system file to replace the damaged one."
    Here is a sample of what disk utilities says
    Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/cdesc-Con versions.yaml
    Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_format ted_s-i.yaml
    Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_param- i.yaml
    Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_query- i.yaml
    Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_senten ce-i.yaml
    Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_xml-i. yaml
    Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/ExtractOptions
    Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/ExtractOptions/cdesc- ExtractOptions.yaml"
    It says it should be done in 6 minutes and I am going on hours!
    Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib".
    Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib".
    Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib".
    Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
    Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib"."
    Any suggestions?

    I would apply or reapply the 10.6.8. Combo Update from Safe Boot (hold Shift down at startup -- give it much more time to boot than usual and leave it in SB for a few minutes before doing anything.)
    http://support.apple.com/kb/dl1399
    The messages you are seeing beginning with "Permissions differ on...." can be ignored.

  • How can I migrate my old sync data to the new system when I don't have any devices signed in

    I just reformatted my computer harddrive and reinstalled both Windows and Linux. Now that I have everything installed and updated, Firefox is asking me to migrate to the new syncing system they have. Problem is, I want to still be able to sign into the old system just to be able to get my bookmarks so I can migrate them to the new system.
    I still have my sync key, and login information for the old system, but I just want to know how to access it once to get my information. I can handle everything from there.

    hello, in this case you'd probably have to use a workaround and download the prior firefox version, disable automatic updating for the moment (in options > advanced > update), link it to the old sync account and upgrade after you have successfully restored your data this way...
    [[Install an older version of Firefox]]

  • I installed Windows 8 on a new drive. How can I move my PhotoShop CS5 software to that new system?

    I originally downloaded the CS5 software in September, 2011 and installed it in Windows Vista. I have since installed Windows 8 on a new drive. I am trying to re-install it on that new drive. I deactivated it on the old system. I can't find a way to re-download it from the Adobe site. How can I download CS5 onto my new system?

    Try http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
    Follow the instructions carefully.

  • Possible to migrate installation w/ SLD to new system using 'tar'/'untar'?

    I have a CRM installation with TREX, that I need to move from one unix system to another (same patch level). As SLD is setup, can I 'tar' the entire installation on the old system, 'untar' the bundle on the new system, and bring the SAP setup back into function mode? It should be doable if SLD is not setup. But since there is SLD bundled in the setup, I am not sure if 'tar' is the way to port the installation. I can give the new system the same hostname, but ip address would be different. Any pointer is highly appreciated! Many Thanks!

    Hi,
    You can perform asystem copy, even SLD can be set up later accroding to your need.
    Regards,
    Vamshi.

  • How to add a new system in existing 3 system lanscape in stms

    Hi,
    we have 3 system in our STMS i.e Dev->Qua->Prod. now we have install one more quality system for business requirement and add the same saystem in stms.
    now my query is that how we can add this new system in existing transport route so that transport request can be added automatically to import queue of both quality system once released from development system.

    Hi Nadar,
    It is possible, But not recommended. Better if you have solution like...
    DEV-->QAS1-->QAS2-->PRD
    But it is possible by using transport groups. There are lots of posts aleady regarding this.
    Basis Stms Configuration Notes
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/4-system-landscape-stms-2712918
    4-system landscape
    STMS config for dual prod (w/ auto synch)
    Thanks
    Asad

  • RUNTIME ERROR WHILE CREATING NEW SYSTEM IN EP6

    Hi
    Can anyone solve my problem, i am geting error while creating new system PORTAL FOR to connect biw 3.5 system
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
    Component Name : com.sap.portal.admin.templateselectionwizard.default
    com/sap/portal/iviewserver/cache/OClass.
    Exception id: 11:29_26/12/06_0014_5891950
    See the details for the exception ID in the log file
    thanks in advance
    Rock

    hi,
    check the log file and let me the the error.
    manish

Maybe you are looking for