New System Error on Vista after upgrading to LR 1.4.1

I just installed the upgrade to 1.4.1 last night. Today when I started my computer I received the error message: "Unsupported 16-bit application: The program or feature "\??\C:\Windows\Twunk_16.exe" cannot start or run due to incompatibity [sic] with 64-bit versions of Windows. Please contact the software vendor to ask if a 64-bit Windows compatible version is available.
Prior to the upgrade my system booted fine, and it also booted fine after I rolled back to version 1.3.1. Is there anything I can do so I don't have to acknowledge this message every time I start my computer?
Thanks!
Diana

This morning I started Lightroom and got a message box titled "Microsoft Visual C++Runtime Library" In the box was "Runtime Error! This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information"
I have uninstalled, reinstalled, done a system restore, all but short of reinstalling Windows.
Has anyone else seen this?
Tim
PS I meant this to be a new topic. I apologize for being in the wrong place.

Similar Messages

System Error in BPE after upgrading to SPS 20

Hi,
on Monday we have updated our XI from SPS 19 to SPS 20.
Since that day we get errors in our BPE.
Following the scenario:
We receive a SOAP request from our partner, which is delivered to a ccBPM Process via an abstract synchronous interface. First step in the process is starting a sync/async bridge, followed by 2 mapping steps. The the bridge is closed by sending the response to our partner.
Looking at the workflow protocol I see the error in step "<i>S/A Bridge - Response to synchronous Request</i>". Looking at the transaction SWF_XI_SWI2_DIAG the error:
<i>Error on access to table SXMS_AS_STATUS Methode: SELECT. 00000000000000000000000000000000
Workitem 000000271155: Object CL_SWF_XI_MSG_BROKER Method SEND_SYNCHRON_REPLY could not be executed</i>
Has anyone an idea why we are getting this error?
Before upgrading to SPS 20 this error did not occur...
Thanks for your help!
Greetings
Habib Sarbas

Hello Habib,
I'm having the same error in our BPM scenario.
Can you share what you had to do to fix this issue?
Thanks,
Jay

Why won't my itunes open on my windows vista after upgrading it

why won't my itunes open up on my windows vista after upgrading it?

Hello maxandsadiesmom,
We have a number of steps that are typically very helpful in getting iTunes to stop misbehaving in Windows.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1717
Best regards,
Allen

Unable to open Bootcamp install of Vista after upgrading MacBook Pro / Mid 2010 to OS Mavericks

Dear Community,
I am unable able to boot the Windows Vista install (via Boot Camp) on my MacBook Pro / mid 2010 after upgrading to OS Maverick.
Any idea about how this problem can be solved (I don't want to purchase Windows 7 and I don't want to purchase a virtual machine)?
Many thanks for your support!
Regards,
PSeguro

Hello 88,
I haven't resized / modified anything since installing Vista on my System. The problem must have incurred when upgrading from Snow Leopard to Maverick.
by the way:
I (just) found out that Windows Vista is booting (automatically) when I insert my original "Mac OS X Install DVD" / 10.6.3 (or my "Applications Install DVD") before starting the MacBook. It will - hwr - not boot without above DVDs in the tray...
sudo fdisk /dev/disk0:
Disk: /dev/disk0          geometry: 60801/255/63 [976773168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 510699696] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 511109336 -    1269544] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [ 512378880 - 464394240] HPFS/QNX/AUX
sudo gpt -r -vv show disk0:
gpt show: disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 976773167
      start       size index contents
          0          1         MBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 510699696      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
511109336    1269544      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
512378880 464394240      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
976773120         15
976773135         32         Sec GPT table
976773167          1         Sec GPT header
Regards,

ERROR upload: Error in uploadXMLFiles after upgrading from 10.2.0.4

After upgrading from 10.2.0.1 to 10.2.0.4 on a newly installed Oracle server, I could not use dbconsole any more. It would not display the login page at http://myserver:1158/em. I tried different browser IE, FireFox, and Chrome. It is the same. Then I checked the %ORACLE_HOME/{server_sid}/sysman/log/emagent.trc and found this errors in it:
2010-02-04 14:11:45 Thread-2552 WARN command: Job Subsystem Timeout set at 600 seconds
2010-02-04 14:11:45 Thread-2552 WARN upload: Upload manager has no Failure script: disabled
2010-02-04 14:11:45 Thread-2552 WARN upload: Recovering left over xml files in upload directory
2010-02-04 14:11:45 Thread-2552 WARN upload: Recovered 0 left over xml files in upload directory
2010-02-04 14:11:45 Thread-2552 WARN metadata: Metric collectSnapshot does not have any data columns
2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric Disk_Path does not have any data columns
2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds.
I tried emctl secure, upload, start and stop many times. It is still the same. It is a new server and a new database. Any idea?
TIA!

I did not change password. It is not password issue.
According to Oracle support,
1) the error "2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds" can be ignored.
2) The error: 2010-02-05 02:52:19 Thread-3864 ERROR util.files: nmeufile_remove D:/oracle/product/10.2.0/db_1/orsvp04.OCTAGONRESEARCH.COM_vp/sysman/recv\00000000365.lk: Error in lfidlb. Error = 0 (No error)
could be because I used "emctl start agent" , which are not allowed command for DBconsole. The correct one is "emctl start dbconsole"
Thanks for your input!

Error in Jboss after upgrading to AutoVue server 20.2.2 from 20.1.0

We've developed an integration to view the files using AutoVue server. At the first stage the integration we used AutoVue server 20.10 and the functionality works fine. After upgrading to AutoVue server 20.2.2 following error comes when accessing the URL http://<servername>:58080/ifs-autovue-connector/servlet/DMS. Please note that Jboss is the application server.
15:31:37,561 INFO [STDOUT] ERROR [http-0.0.0.0-58080-1] (?:?) - Failed to verify or update null
java.lang.NullPointerException
        at java.util.Hashtable.put(Hashtable.java:514)
        at com.cimmetry.vuelink.context.GenericContext.setInitParameter(Unknown Source)
        at com.cimmetry.vuelink.Vuelink.registerDMSContext(Unknown Source)
        at com.cimmetry.vuelink.Vuelink.init(Unknown Source)
        at com.ifs.autovueconnector.DMS.init(DMS.java:22)
        at javax.servlet.GenericServlet.init(GenericServlet.java:212)
        at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1048)
        at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:777)
        at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:129)
        at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
        at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:183)
        at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:95)
        at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.process(SecurityContextEstablishmentValve.java:126)
        at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invoke(SecurityContextEstablishmentValve.java:70)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
        at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
        at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:566)
        at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:158)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
        at org.jboss.web.tomcat.service.request.ActiveRequestResponseCacheValve.internalProcess(ActiveRequestResponseCacheValve.java:74)
        at org.jboss.web.tomcat.service.request.ActiveRequestResponseCacheValve.invoke(ActiveRequestResponseCacheValve.java:47)
        at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:330)
        at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:905)
        at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:613)
        at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:2036)
        at java.lang.Thread.run(Thread.java:745)
15:31:37,572 INFO [STDOUT] WARN [http-0.0.0.0-58080-1] (?:?) - Failed to load DMSAction class: com.ifs.autovueconnector.ActionGetProperties
java.lang.ClassNotFoundException: com.ifs.autovueconnector.ActionGetProperties from BaseClassLoader@763d9f12{vfszip:/C:/ifs_tqa/jboss-eap-5.1/jboss-as/server/App8TQA/deploy/docvue.ear/ifs-autovue-connector.war/}
        at org.jboss.classloader.spi.base.BaseClassLoader.loadClass(BaseClassLoader.java:477)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:358)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:191)
        at com.cimmetry.vuelink.Vuelink.loadDMSAction(Unknown Source)
        at com.cimmetry.vuelink.Vuelink.registerDMSActions(Unknown Source)
        at com.cimmetry.vuelink.Vuelink.init(Unknown Source)
        at com.ifs.autovueconnector.DMS.init(DMS.java:22)
        at javax.servlet.GenericServlet.init(GenericServlet.java:212)
        at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1048)
        at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:777)
        at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:129)
        at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
        at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:183)
        at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:95)
        at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.process(SecurityContextEstablishmentValve.java:126)
        at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invoke(SecurityContextEstablishmentValve.java:70)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
        at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
        at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:566)
        at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:158)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
        at org.jboss.web.tomcat.service.request.ActiveRequestResponseCacheValve.internalProcess(ActiveRequestResponseCacheValve.java:74)
        at org.jboss.web.tomcat.service.request.ActiveRequestResponseCacheValve.invoke(ActiveRequestResponseCacheValve.java:47)
        at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:330)
        at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:905)
        at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:613)
        at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:2036)
        at java.lang.Thread.run(Thread.java:745)
15:31:37,743 INFO [STDOUT] Initializing proxy connection pool
The errors is ClassNotFoundException. But we've not implemented the class ActionGetProperties. Instead propactions are used. Please help us to resolve this issue as our customers will be in trouble after the AutoVue upgrade.
/Amaranatha

I would assume you are using the new jars that come with the latest ISDK
and that you have read the documentation with the list of all the changes
so in order to known which configuration parameter is missing, you might need to trace it using a debugger
there is one parameter that is missing ie returning null and it is obviously a mandatory one
Also, you most defintively did not properly migrate you web app from 20.1 repo to the 20.2.3 repo as you have missing classes
com.ifs.autovueconnector.ActionGetProperties
so your class path is not properly up to date
that also is a deployment descriptor error
Please review you deployment descriptor and validate that your war is properly built

System becoming un-responsive after upgrade to Maverick

After upgrading to Maverick I am experiencing massive performace problems to the point of the system not being usable.
System: 2010 iMac
Upgraded Yesterday morning, Upgrade process went smooth, no issues at first. First symptoms of problems were hick-ups in video playback, jerks in window switching. From then on over several hours the system became slower and slower to the point of being unusable. Performed system reboot, which took 45min, followed by fast degradation and unusability.
Attempted revovery actions with help from Apple support (thanks, even though the problem remains so far):
Booted system via the network into recovery mode, performed disk check: SMART status OK, verified and repaired disk no issues deteced, verified partition, no issues detected, data volume looks correct.
Attempted normal boot-up, unsucceful
Performed powerdown, followed by opt+cntr+R+P boot, no success
Performed safe boot (shift), system came back up after 1.5 hours, extremely unresponsive, but at least it is up. I am scared to try to shut it down.
Diagnosis attempts: Other than time-outs, no unusual errors in console, file hirachy and files look Ok from terminal, access very slow. Can't see any obviously problematic processes in Activity Monitor, RAM usage about 2.5GBytes out of 12GBytes total, largest is kernel with 700MB, CPU not loaded, no high disk or network io. Evything looks to me like a pefectly normal system that runs at 1/100th or so speed.
Maverick managed to perform a time machine back-up over night and all earlier back-up are gone. So no chance to restore back to Mountain Lion that way.
Anybody with similar problems, any ideas for next steps?
Thanks

Here is the output, while booted into safe:
Video Information:
          ATI Radeon HD 5750 - VRAM: 1024 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
System Software:
          OS X 10.9 (13A603) - Uptime: 0 days 2:47:0
Disk Information:
          WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 750.37 GB (191.86 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
                    BOOTCAMP (disk0s4) <not mounted>: 245.63 GB
          HL-DT-STDVDRW GA32N
USB Information:
          Apple Computer, Inc. IR Receiver
          Apple Inc. Built-in iSight
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Internal Memory Card Reader
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
          [failed] com.apple.ucupdate.plist
Problem System Launch Agents:
Launch Daemons:
          [not loaded] com.adobe.fpsaud.plist
          [not loaded] com.adobe.SwitchBoard.plist
          [not loaded] com.google.keystone.daemon.plist
          [not loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [not loaded] com.adobe.CS5ServiceManager.plist
          [not loaded] com.google.keystone.agent.plist
          [not loaded] SBA_ListenerAgent.plist
User Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [not loaded] com.valvesoftware.steamclean.plist
User Login Items:
          None
Internet Plug-ins:
          AdobePDFViewer.plugin
          ContentUploaderPlugin.plugin
          Default Browser.plugin
          DivXBrowserPlugin.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          googletalkbrowserplugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          Mathematica.plugin
          net.juniper.DSSafariExtensions.plugin
          NP_2020Player_IKEA.plugin
          NPDjVu.plugin
          PrintDialogExt.plugin
          npgtpo3dautoplugin.plugin
          o1dbrowserplugin.plugin
          OfficeLiveBrowserPlugin.plugin
          QuickTime Plugin.plugin
          RealPlayer Plugin.plugin
          SharePointBrowserPlugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
          Google Earth Web Plug-in.plugin
Bad Fonts:
          None
Time Machine:
          Skip System Files: NO
          Mobile backups: OFF
          Auto backup: NO
          Volumes being backed up:
                    Macintosh HD: Disk size: 750.37 GB Disk used: 558.51 GB
          Destinations:
                    Data [Network] (Last used)
                    Total size: 2 TB
                    Total number of backups: 6
                    Oldest backup: 2013-10-31 14:53:35 +0000
                    Last backup: 2013-11-01 14:14:20 +0000
                    Size of backup disk: Adequate
                              Backup size 2 TB > (Disk used 558.51 GB X 3)
Top Processes by CPU:
               3%          Dock
               2%          com.apple.IconServicesAgent
               1%          System Preferences
               1%          WindowServer
               0%          EtreCheck
               0%          coreservicesd
               0%          lsregister
               0%          Finder
               0%          mds
               0%          SystemUIServer
Top Processes by Memory:
          0 B                imagent
          0 B                autofsd
          0 B                networkd_privileged
          0 B                com.apple.imdpersistence.IMDPersistenceAgent
          0 B                com.apple.dock.extra
          0 B                usernoted
          0 B                logind
          0 B                airportd
          0 B                notifyd
          0 B                blued
Virtual Memory Statistics:
          8.72 GB            Free RAM
          1.84 GB            Active RAM
          780 MB             Inactive RAM
          689 MB             Wired RAM
          198 MB             Page-ins
          0 B                Page-outs

System exception code 0xc0000005 after upgrading to LabVIEW 8.2

After upgrading to LabVIEW 8.2 from LabVIEW 8.0 I am continously getting a system reboot on my PXI (8187) when attempting to run my real time loops which worked fine with LabVIEW 8.0. The loops seem to start, and within less than a 30 seconds the system reboots. Upon reboot a message is displayed reboot due to system error. After running and getting this error again the system reboots into safe mode. Looking at the nirtlog file on the PXI, there is system crash log which list the exception code as 0xC0000005 and a listing of loaded dlls.
Does anyone have any idea what may be leading to this?
Thanks,
Kevin

The following is a simple example that produces the exception and reboots the PXI. This VI was originally created on a machine with LabVIEW version 8.0 and run on a PXI-8187 w/ RealTime version 8 and it ran without issue. I then took the VI to a machine running LabVIEW 8.2, I opened the VI, which compiled it to version 8.2, and ran it on another PXI-8187 w/ RealTime version 8.2 and I got a system exception and the PXI rebooted. If I run the two loops at the same priority level, it seems to run without issue. Also if I run with the loops at different priority levels and place a check in the Discard Missed Periods and in the Maintain Original Phase of the lower priority loop, it seems to run fine as well. However if I uncheck either the Discard Missed Periods or the Maintain Original Phase (as is set in the attached VI) the exception will occur. Any thoughts on what is going on, am I doing something wrong?
Thanks,
Kevin
Attachments:
TestLoop.vi ‏155 KB

Syntax error in SAPLCRM_CONDITION_COM_OW after upgrade 7 - 7 with EhP1

Dears,
after upgrade I cannot go into edit mode for activities, sales orders. I get a short dump.
I think it may be connected to FM CRM_ORDER_GET_ACTIVE_OW which returns nothing , so variable for
lv_no_pricing is not set to X. Then when system tries to check pricing it throws error in LCRM_CONDITION_COM_OWF02, that 'CS_ACS_I_COM' does not have a component 'BASIC_TIER.
Can you help?
the same I get when opening document in sap gui and web ui.
It maybe some additional configuration loaded in upgrade.
Best Regards
Radek

Hi,
These structures are usually generated. Please go to transaction
/SAPCND/CTFC, for Application CRM regenerate all fields again.
Go regenerate the field catalog to the following IMG menu;
Customer Relationship Management
-> Basic Functions
   -> Pricing
     -> Define Settings for Pricing
       -> Maintain Field Catalog
Goto menu Field Catalog -> Generate.
Regards,
Aidan

Kernel error on startx after upgrade to kernel 3.0

After upgrading i can no longer start X. The screen turns black and the computer does not respond to input, I am however able to login using ssh.
The system is a intel atom cpu and nvidia ion gpu using the nvidia driver.
I'll be thankfull for any help.
The output from dmesg is
[ 179.200661] BUG: unable to handle kernel paging request at ffffffffa027d738
[ 179.200674] IP: [<ffffffff8122104b>] strnlen+0xb/0x30
[ 179.200689] PGD 1695067 PUD 1699063 PMD 5baf2067 PTE 0
[ 179.200700] Oops: 0000 [#1] PREEMPT SMP
[ 179.200710] CPU 1
[ 179.200713] Modules linked in: appletalk ipx p8022 psnap llc p8023 ipv6 fuse ext2 nvidia(P) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm joydev evdev shpchp snd_timer snd soundcore snd_page_alloc forcedeth pci_hotplug i2c_nforce2 psmouse serio_raw pcspkr i2c_core wmi button processor autofs4 lirc_dev ext4 mbcache jbd2 crc16 hid_logitech ff_memless usbhid hid sg sr_mod cdrom sd_mod ata_generic pata_acpi ohci_hcd ahci libahci libata ehci_hcd scsi_mod usbcore
[ 179.200798]
[ 179.200804] Pid: 1029, comm: X Tainted: P C 3.0-ARCH #1 To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M.
[ 179.200816] RIP: 0010:[<ffffffff8122104b>] [<ffffffff8122104b>] strnlen+0xb/0x30
[ 179.200827] RSP: 0018:ffff88002f549c98 EFLAGS: 00010086
[ 179.200832] RAX: 0000000000000000 RBX: ffff88005c2590bf RCX: 0000000000000000
[ 179.200838] RDX: ffffffffa027d738 RSI: ffffffffffffffff RDI: ffffffffa027d738
[ 179.200844] RBP: ffff88002f549c98 R08: 000000000000ffff R09: 000000000000ffff
[ 179.200850] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa027d738
[ 179.200855] R13: ffff88005c25a000 R14: 0000000000000000 R15: 000000000000ffff
[ 179.200862] FS: 00007f1fe8c2a880(0000) GS:ffff88005fc80000(0000) knlGS:0000000000000000
[ 179.200869] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 179.200874] CR2: ffffffffa027d738 CR3: 000000002f57c000 CR4: 00000000000006e0
[ 179.200880] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 179.200886] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 179.200892] Process X (pid: 1029, threadinfo ffff88002f548000, task ffff88005c3fa3f0)
[ 179.200897] Stack:
[ 179.200901] ffff88002f549cd8 ffffffff812232de 0000000000000000 ffff88005c2590bf
[ 179.200913] ffffffff814d27cd ffff88002f549d70 ffffffff814d27cd ffff88005c25a000
[ 179.200924] ffff88002f549d58 ffffffff81224389 000000002f54ffff 0000000000000000
[ 179.200934] Call Trace:
[ 179.200946] [<ffffffff812232de>] string.isra.5+0x3e/0xd0
[ 179.200955] [<ffffffff81224389>] vsnprintf+0x219/0x620
[ 179.200966] [<ffffffff81178c98>] seq_printf+0x58/0x90
[ 179.200980] [<ffffffff810c35ab>] show_interrupts+0x25b/0x310
[ 179.200989] [<ffffffff8117906e>] seq_read+0x29e/0x3d0
[ 179.200998] [<ffffffff81178dd0>] ? seq_lseek+0x100/0x100
[ 179.201006] [<ffffffff811b1fb3>] proc_reg_read+0x83/0xc0
[ 179.201016] [<ffffffff8115793c>] vfs_read+0xac/0x180
[ 179.201023] [<ffffffff81157a5a>] sys_read+0x4a/0x90
[ 179.201033] [<ffffffff813f4402>] system_call_fastpath+0x16/0x1b
[ 179.201039] Code: 31 c0 80 3f 00 55 48 89 e5 74 11 48 89 f8 66 90 48 83 c0 01 80 38 00 75 f7 48 29 f8 5d c3 66 90 55 31 c0 48 85 f6 48 89 e5 74 23
[ 179.201091] 3f 00 74 1e 48 89 f8 eb 0c 0f 1f 00 48 83 ee 01 80 38 00 74
[ 179.201117] RIP [<ffffffff8122104b>] strnlen+0xb/0x30
[ 179.201126] RSP <ffff88002f549c98>
[ 179.201130] CR2: ffffffffa027d738
[ 179.201136] ---[ end trace 700eca34042d7ef4 ]---
[ 179.201144] note: X[1029] exited with preempt_count 1
[ 179.204777] BUG: scheduling while atomic: X/1029/0x10000002
[ 179.204789] Modules linked in: appletalk ipx p8022 psnap llc p8023 ipv6 fuse ext2 nvidia(P) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm joydev evdev shpchp snd_timer snd soundcore snd_page_alloc forcedeth pci_hotplug i2c_nforce2 psmouse serio_raw pcspkr i2c_core wmi button processor autofs4 lirc_dev ext4 mbcache jbd2 crc16 hid_logitech ff_memless usbhid hid sg sr_mod cdrom sd_mod ata_generic pata_acpi ohci_hcd ahci libahci libata ehci_hcd scsi_mod usbcore
[ 179.204946] Pid: 1029, comm: X Tainted: P D C 3.0-ARCH #1
[ 179.204955] Call Trace:
[ 179.204979] [<ffffffff813ea533>] __schedule_bug+0x5f/0x64
[ 179.204994] [<ffffffff813f09e1>] schedule+0x831/0x9f0
[ 179.205009] [<ffffffff813f39a2>] ? tty_unlock+0x32/0x50
[ 179.205026] [<ffffffff8116d7ac>] ? d_free+0x4c/0x70
[ 179.205041] [<ffffffff81174c0d>] ? vfsmount_lock_local_unlock+0x3d/0x50
[ 179.205056] [<ffffffff81175db0>] ? mntput_no_expire+0x30/0xe0
[ 179.205069] [<ffffffff81175e7f>] ? mntput+0x1f/0x30
[ 179.205083] [<ffffffff8115925f>] ? fput+0x16f/0x210
[ 179.205098] [<ffffffff8105351a>] __cond_resched+0x2a/0x40
[ 179.205111] [<ffffffff813f0e22>] _cond_resched+0x32/0x40
[ 179.205126] [<ffffffff81060005>] put_files_struct+0xa5/0x110
[ 179.205140] [<ffffffff81060132>] exit_files+0x52/0x60
[ 179.205153] [<ffffffff8106063a>] do_exit+0x18a/0x8f0
[ 179.205167] [<ffffffff8105e441>] ? kmsg_dump+0xb1/0xe0
[ 179.205183] [<ffffffff8100f35a>] oops_end+0xaa/0xf0
[ 179.205210] [<ffffffff813ea099>] no_context+0x209/0x218
[ 179.205231] [<ffffffff813ea236>] __bad_area_nosemaphore+0x18e/0x1b1
[ 179.205245] [<ffffffff813f0e76>] ? preempt_schedule+0x46/0x60
[ 179.205259] [<ffffffff813f34f0>] ? _raw_spin_unlock_irqrestore+0x10/0x40
[ 179.205279] [<ffffffff813ea26c>] bad_area_nosemaphore+0x13/0x15
[ 179.205294] [<ffffffff81039b1c>] do_page_fault+0x3ec/0x4d0
[ 179.205310] [<ffffffff81317ca3>] ? pci_conf1_read+0xc3/0x120
[ 179.205327] [<ffffffff8108292f>] ? __mutex_init+0x2f/0x40
[ 179.205341] [<ffffffff81171103>] ? inode_init_always+0x113/0x1d0
[ 179.205355] [<ffffffff811b17ff>] ? proc_alloc_inode+0x6f/0xb0
[ 179.205369] [<ffffffff8107f247>] ? bit_waitqueue+0x17/0xd0
[ 179.205389] [<ffffffff813f3e45>] page_fault+0x25/0x30
[ 179.205417] [<ffffffff8122104b>] ? strnlen+0xb/0x30
[ 179.205431] [<ffffffff813f217e>] ? mutex_unlock+0xe/0x10
[ 179.205444] [<ffffffff812232de>] string.isra.5+0x3e/0xd0
[ 179.205458] [<ffffffff81224389>] vsnprintf+0x219/0x620
[ 179.205474] [<ffffffff81178c98>] seq_printf+0x58/0x90
[ 179.205494] [<ffffffff810c35ab>] show_interrupts+0x25b/0x310
[ 179.205510] [<ffffffff8117906e>] seq_read+0x29e/0x3d0
[ 179.205525] [<ffffffff81178dd0>] ? seq_lseek+0x100/0x100
[ 179.205539] [<ffffffff811b1fb3>] proc_reg_read+0x83/0xc0
[ 179.205552] [<ffffffff8115793c>] vfs_read+0xac/0x180
[ 179.205566] [<ffffffff81157a5a>] sys_read+0x4a/0x90
[ 179.205581] [<ffffffff813f4402>] system_call_fastpath+0x16/0x1b
[ 179.205823] BUG: scheduling while atomic: X/1029/0x10000002
[ 179.205832] Modules linked in: appletalk ipx p8022 psnap llc p8023 ipv6 fuse ext2 nvidia(P) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm joydev evdev shpchp snd_timer snd soundcore snd_page_alloc forcedeth pci_hotplug i2c_nforce2 psmouse serio_raw pcspkr i2c_core wmi button processor autofs4 lirc_dev ext4 mbcache jbd2 crc16 hid_logitech ff_memless usbhid hid sg sr_mod cdrom sd_mod ata_generic pata_acpi ohci_hcd ahci libahci libata ehci_hcd scsi_mod usbcore
[ 179.205988] Pid: 1029, comm: X Tainted: P D C 3.0-ARCH #1
[ 179.205996] Call Trace:
[ 179.206016] [<ffffffff813ea533>] __schedule_bug+0x5f/0x64
[ 179.206031] [<ffffffff813f09e1>] schedule+0x831/0x9f0
[ 179.206052] [<ffffffff81099cf5>] ? module_put+0x115/0x130
[ 179.206067] [<ffffffff81174c0d>] ? vfsmount_lock_local_unlock+0x3d/0x50
[ 179.206082] [<ffffffff81175db0>] ? mntput_no_expire+0x30/0xe0
[ 179.206096] [<ffffffff81175e7f>] ? mntput+0x1f/0x30
[ 179.206110] [<ffffffff8115925f>] ? fput+0x16f/0x210
[ 179.206125] [<ffffffff8105351a>] __cond_resched+0x2a/0x40
[ 179.206137] [<ffffffff813f0e22>] _cond_resched+0x32/0x40
[ 179.206151] [<ffffffff81060005>] put_files_struct+0xa5/0x110
[ 179.206163] [<ffffffff81060132>] exit_files+0x52/0x60
[ 179.206174] [<ffffffff8106063a>] do_exit+0x18a/0x8f0
[ 179.206186] [<ffffffff8105e441>] ? kmsg_dump+0xb1/0xe0
[ 179.206202] [<ffffffff8100f35a>] oops_end+0xaa/0xf0
[ 179.206227] [<ffffffff813ea099>] no_context+0x209/0x218
[ 179.206248] [<ffffffff813ea236>] __bad_area_nosemaphore+0x18e/0x1b1
[ 179.206262] [<ffffffff813f0e76>] ? preempt_schedule+0x46/0x60
[ 179.206277] [<ffffffff813f34f0>] ? _raw_spin_unlock_irqrestore+0x10/0x40
[ 179.206297] [<ffffffff813ea26c>] bad_area_nosemaphore+0x13/0x15
[ 179.206312] [<ffffffff81039b1c>] do_page_fault+0x3ec/0x4d0
[ 179.206328] [<ffffffff81317ca3>] ? pci_conf1_read+0xc3/0x120
[ 179.206345] [<ffffffff8108292f>] ? __mutex_init+0x2f/0x40
[ 179.206359] [<ffffffff81171103>] ? inode_init_always+0x113/0x1d0
[ 179.206373] [<ffffffff811b17ff>] ? proc_alloc_inode+0x6f/0xb0
[ 179.206387] [<ffffffff8107f247>] ? bit_waitqueue+0x17/0xd0
[ 179.206407] [<ffffffff813f3e45>] page_fault+0x25/0x30
[ 179.206434] [<ffffffff8122104b>] ? strnlen+0xb/0x30
[ 179.206448] [<ffffffff813f217e>] ? mutex_unlock+0xe/0x10
[ 179.206462] [<ffffffff812232de>] string.isra.5+0x3e/0xd0
[ 179.206477] [<ffffffff81224389>] vsnprintf+0x219/0x620
[ 179.206494] [<ffffffff81178c98>] seq_printf+0x58/0x90
[ 179.206514] [<ffffffff810c35ab>] show_interrupts+0x25b/0x310
[ 179.206529] [<ffffffff8117906e>] seq_read+0x29e/0x3d0
[ 179.206544] [<ffffffff81178dd0>] ? seq_lseek+0x100/0x100
[ 179.206558] [<ffffffff811b1fb3>] proc_reg_read+0x83/0xc0
[ 179.206573] [<ffffffff8115793c>] vfs_read+0xac/0x180
[ 179.206586] [<ffffffff81157a5a>] sys_read+0x4a/0x90
[ 179.206601] [<ffffffff813f4402>] system_call_fastpath+0x16/0x1b
[ 179.207627] NVRM: os_flush_work_queue: attempted to execute passivework from an atomic or interrupt context.
[ 179.229435] NVRM: VM: nv_kern_close:2097: 0xffff88005bfd40c0, 11 page(s), count = 1, flags = 0x00000011, 0x000000005b0fd000, 0xffff88005bfd42a0
Edit: Downgraded to kernel26-2.6.39.1-1-x86_64.pkg.tar.xz nvidia-275.09.07-1-x86_64.pkg.tar.xz nvidia-utils-275.09.07-1-x86_64.pkg.tar.xz lirc-1\:0.9.0-4-x86_64.pkg.tar.xz and things work again.
Last edited by eirikst (2011-08-28 16:19:44)

The A-GPS needs to have direct line of sight to a satellite such as when standing outside or mounted on the dash of an automobile. If indoors the A-GPS will use triangulation with the nearest three cellular towers to pinpoint your approximate location. I haven't had any issue using A-GPS while driving or walking with Google Maps. As for third party apps this has nothing to do with Apple and the 3.0 firmware but does have to do with the developers of those third party apps you're having problems with. Suggest contacting the developer of said apps through the iTunes app store feedback link for each app. This way if the app isn't updated in a timely manner Apple will pull it from the app store until the developer can provide an update for their customers such as yourself. It's sort of like running OS X or Windows on your desktop where you wouldn't file a complaint to Apple (OS X) or Microsoft (Windows) when one of your third party applications starts experiencing issues.

ORA-01722: invalid number (Error in Application after upgrade to 3.0)

Dear All,
After upgrading to 3.0 I am no longer able to login to my application. The error I am seeing is:
ORA-01722: invalid number
Error Could not process show_hide_memory.show_hide_collection_output procedure !
Please help me pin-point the issue and fixed it.
This happens in some applications but in others it doesn't...
Regards,
Pawel.

I believe I have found the source of the problem!
This is coming from the sample application which was used for the show/hide of regions example.
The code behind the above procedure is:
CREATE OR REPLACE
PACKAGE show_hide_memory AS
PROCEDURE show_hide_collection;
PROCEDURE show_hide_collection_output;
END;
CREATE OR REPLACE PACKAGE BODY show_hide_memory AS
PROCEDURE show_hide_collection AS
l_arr apex_application_global.vc_arr2;
l_found boolean := FALSE;
l_collection_name VARCHAR2(255) := 'SHOW_HIDE_COLLECTION';
BEGIN
IF(wwv_flow_collection.collection_exists(p_collection_name => l_collection_name) = FALSE) THEN
htmldb_collection.create_or_truncate_collection(p_collection_name => l_collection_name);
END IF;
l_arr := apex_util.string_to_table(p_string => v('TEMPORARY_ITEM'), p_separator => ']');
-- If the array member count of l_arr < 3, then the following code will raise an exception
FOR c1 IN
(SELECT seq_id
FROM apex_collections
WHERE collection_name = l_collection_name
AND c001 = l_arr(1)
AND c002 = l_arr(2)
AND c003 = l_arr(3))
LOOP
-- It exists, so delete it
apex_collection.delete_member(p_collection_name => l_collection_name, p_seq => c1.seq_id);
l_found := TRUE;
END LOOP;
IF l_found = FALSE THEN
apex_collection.add_member(p_collection_name => l_collection_name, p_c001 => l_arr(1), p_c002 => l_arr(2), p_c003 => l_arr(3));
END IF;
COMMIT;
END show_hide_collection;
PROCEDURE show_hide_collection_output AS
BEGIN
htp.prn('<script type="text/javascript">' || CHR(10));
htp.prn('' || CHR(10));
htp.prn('</script>' || CHR(10));
END show_hide_collection_output;
END;
I guess now I have to find the bug in the above code !

Error launching application after upgrading to 10.1.3 production

Our web structure looks like this:
+ web
    + bin             project jar files and client jar libraries
    + images
    + WEB-INF
       + conf        application property files
       + lib           project jar files and server jar libraries
       + logs
    + xml
+ META-INFWith previous versions of OC4J this web.xml would suffice:
<?xml version="1.0"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
         version="2.4">
<display-name>ch_web</display-name>
<description>web.xml file for Casthouse</description>
<servlet>
    <servlet-name>afc.system.server.StartupServlet</servlet-name>
    <servlet-class>afc.system.server.StartupServlet</servlet-class>
    <init-param>
      <param-name>CONFIGURATION_HOME</param-name>
      <param-value>C:\oracle\JDeveloper10g\j2ee\home\applications\ch_web\ch_web\WEB-INF\conf\</param-value>
    </init-param>
    <init-param>
      <param-name>SERVLET_HOME</param-name>
      <param-value>/ch_web/servlet/</param-value>
    </init-param>
    <load-on-startup>1</load-on-startup>
</servlet>
<servlet>
    <servlet-name>casthouse.analysis.server.spectro.AnalysisReceiverService</servlet-name>
    <servlet-class>casthouse.analysis.server.spectro.AnalysisReceiverService</servlet-class>
    <load-on-startup>2</load-on-startup>
</servlet>
<session-config>
    <session-timeout>30</session-timeout>
</session-config>
<mime-mapping>
    <extension>html</extension>
    <mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
    <extension>txt</extension>
    <mime-type>text/plain</mime-type>
</mime-mapping>
<welcome-file-list>
    <welcome-file>index.html</welcome-file>
</welcome-file-list>
<login-config>
    <auth-method>BASIC</auth-method>
</login-config>
</web-app> But after upgrading, the server side initializes allright, but the client cannot connect. I get a 404- page cannot be found when trying.
After adding the following to my web.xml...
   <servlet>
     <servlet-name>LoginServlet</servlet-name>
     <servlet-class>afc.login.server.LoginServlet</servlet-class>
   </servlet>
   <servlet-mapping>
     <servlet-name>LoginServlet</servlet-name>
     <url-pattern>/servlet/*</url-pattern>
   </servlet-mapping>The client did locate some code, but not all. From the java console, I discovered several exceptions due to servlets referred and not found. I tried to map some of the central servlets in our application, but stopped. I thought, this cannot be right. We have very many servlets in our application. It shouldn't be nescessary to map them all in our web.xml... Is it?
What am I missing?

Ok.. hmm, life was easier before...
I tried to add the http.webdir.enable="true" to the only orion-web.xml I could find (under j2ee\home\application-deployments\{web-root}\{context-root}\orion-web.xml
Don't know if this should be in another location, we do not deploy this. This is generated during deployment from our JDeveloper deployment profile). But after the container was restarted, the file was reverted to the old version without this attribute set. Frustrating...
45 servlets are now registered in our web.xml. That is 3 servlets which should be accessible to the user from the address bar in the browser, and 42 servlets accessible from either the client or the server programmatically.
But is it then nescessary to add both <servlet> tag and <servlet-mapping> tag for one servlet, or is the <servlet-mapping> tag only nescessary for those servlets, which should be available to the end user, and not directlly called from the application itself?
I still get an exception when trying to instanciate the application. Our application uses one or two properties files which it needs to read upon instanciation. They live in {context-root}\WEB-INF\conf\
OC4J doesn't seem to give access to this folder anymore. What do I have to include in our web.xml in order to give the appropriate read access to this folder? Should only be readable server side from a Servlet. Contents are communicated to the client through this servlet.

New MBA extremely slow internet after upgrading to 10.6.7

Hey Folks, I have updating my brand new MBA to 10.6.7 and my internet is now extremely slow through the airpot. All of my other macs are running 10.6.6 and are very fast. Im using a new Airport Extreme base station, does anyone have any idea on how to fix this. LIke I mean its extremely slow online.
Thanks
Jason

Good day,
I'd like to confirm a few things:
What action/activity are you performing in Acrobat when it crashes?
Is the crash consistent at the same point?
You stated in the subject '..after upgrading to 10.6.7'
What OS was on your iMac when you purchased it?
Was this problem occuring when using an earlier verion of 10.6.x?
Have you applied to font update Apple released to address some of the problems they introduced with 10.6.7?
Did you perform a clean install of Acrobat on your iMac after you purchased it or was the application transferred in some way?
I hope we can get this resolved for you!
Regards,
David
Acrobat Community Manager
Adobe Systems

Date / Time Error on SPA3102 after upgrade to SW version: 5.1.7(GW)

After upgrading the software of my SPA's date and time is stuck on:
Current Time: 1/1/2003 12:10:11and can therfore not register. I tried changing to several NTP ie: time.nist.gov or ntp.sipgate.net but nothing gives.
Anu suggestions how to solve this problem?
Solved!
Go to Solution.

make sure that the device is on the internet or that it is getting DNS server addresses.
also you can try to point it to a local computer IP address to use its time.

ITunes will not open on Windows Vista after upgrading to new version

After installing the latest version, my iTunes will not open. I have uninstall and reinstall two times and still nothing, any suggestions or tips?

King Penguin set you on the right track. It's probably security software not recognizing the new version of itunes, and blocking it.
http://support.apple.com/kb/TS3125

New System Error on Vista after upgrading to LR 1.4.1

Similar Messages

Maybe you are looking for