New system with Neo4 Platinum doesn't work at all!!!
Hi guys,
I bought my new system:
1 - AMD Athlon 64 3200+ Core Venice
2 - MSI K8N Neo4 Platinum /BIOS 1.1
3 - RAM S3+ 1GB (2x512 MB)
4 - Western Digital Caviar SE 120 GB SATA WD1200JD
5 - Hitachi Deskstar 80 GB SATA II HDS728080PLA380
6 - NEC 3500AG DVD-RW
7 - Albatron 6600GT 128 MB PCI-E
8 - Enermax Noisetaker 485W
Where is the problem?
It's IMPOSSIBLE to install the OS.
I can't install Windows XP, I can't install Windows 2000, I can't install Windows 98.......
When I try to install Windows (no matter what version) the system tell me that it CAN'T read or write some file from the CD to the HD.
No matter what files it is, once it's the shell32.dll...... another installation it's the file ntdll.dll....... another time the file riched20.dll....... another time it's the file "whatTHEhell!" and so....
I tried to connect one only HD, I tried to connect the WD and the same. I tried to connect the HITACHI, and the same.
I tried to connect my HD to SATA 1, 2, 3, 4 on nVidia controller, and the same.
I tried with the Silicon Image controller and nothing changed.
I tried to change the optical drive, I connected my old ASUS CD 50x and disconnected the DVD Writer, but the same.
I've started to think that this could be a cable issue, then I changed the IDE Cable and the SATA cable... but nothing.
I flashed the bios from version 1.1 to 1.4 with the support to Venice core, the same.
I also disconnected my SATA HD and I've plugged in my old PATA HD, an old Samsung 6,4 GB HD............... BUT NOTHING!
I can't imagine nothing more to do to solve the problem, but I'm listening for your advices.
Thank's.
elem
Quote from: Supershanks on 05-June-05, 19:23:35
hi elem,
Type of floppy i meant was 1 with a usb componenent like:-
Mitsumi FA404M 1.44 Silver FDD+Int USB2 7 in 1 Card Reader so if it's just a n ordinary floppy i'd plug it back in.
I'd try 3) Memtest86+ run it as decribed in the link to verify your memory isn't the issue.
luck
Yes Supershanks and blazing storm,
I misanderstood, but now I reattached my floppy and performed a full scan of my HDDs
with their own diagnostic tools, downloaded from the Western Digital and Hitachi websites.
I choosed the DOS version that make a bootable floppy disk and verified the drives.
The HDDs are working fine and there's no errors on the surface, the HDDs are ok.
Quote from: SAB on 05-June-05, 19:35:43
Try swapping the optical drive that you are loading the O.S. from. Make sure SATA controller AND SATA ports are enabled. Make sure IDE controller for floppy is also enabled. Perhaps your optical drive has one piece of dust on just the wrong place. That's all it takes to throw one of those things off!!!
SAB, I've tried to swapping my optical drives yet. I've tried a DVD-RW NEC 3500 AG, then a CD Player from ASUS, then a CD-RW from LITEON.
The same problem with the new system, but these are performing very well on my old pc, then these aren't the problem.
I think the problem could be only on CPU, or MOTHERBOARD or MEMORY.
Thank's Supershanks, I'm downloading MemTest86+ for a memory scan.
I'll let you guys to know as fast as possibile the results!
Similar Messages
-
Help! I have had my iMac G5 fitted with new Logic Board but it doesn't work
Help! I have had my iMac G5 fitted with new Logic Board but it doesn't work
I have just had my iMac G5 First Gen 1.8Ghz fitted with a new Logic Board under the Apple Repair Extension Programme for iMacs.
I got the iMac home from the repairers and switched it on and everything was working fine for about 2 hours and then all of a sudden the Error Page came up on the Screen (with a big On/Off Switch Logo) and it said I had to shut down.
So I shut it down waited a few minutes and then tried to re-boot it but nothing happened. All that happended was the Power Light in the Right hand corner came on..but nothing else....
Help! Any ideas what to do please?If you have an external firewire drive (it has to be firewire, USB won't boot on a Rev A), plug it in to the firewire port and turn it on, then boot your iMac and see if it shows on the screen.
Have you tried to hit the eject (up arrow, the last button on the top row of the keyboard) button when you boot, perhaps the repairers left a disc in the drive? Then try and put your install disc in.
Miriam -
I have iPhone 4S with new ios7, and panorama wallpaper doesn't work ! It let me shoose it, but it's not work, why?
These prices are for the U.S.
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model Out-of-Warranty Service
iPhone 5 $229
iPhone 4S $199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone $149
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above. This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details. -
Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500.
HP says to go through Preview, Image Capture, or Print/Scan in System Prefs.
Still doesn't work. Any ideas/similar experiences?Sure it is, yet it's called HP LaserJet Professional M1210nf MFP Series *
Today, I followed your other advice, and deleted the printer, deleted the /Library/Printer/hp folder, downloaded the entire set of driver, re-installed the printer twice, once with the driver, once with Bonjour.
The Bonjour Printer has the scan option active, but it is doesn't work (refer to above.), it is called M1217nfw
The Apple Driver Printer doesn't show the scan option at all, it is called M1217nf (as on the http://support.apple.com/kb/HT3669#HP list.) This model number doesn't exist, as far as I can tell.
Still, everything works perfectly in Snow Leopard, for a MF printer that has been manufactured years after Snow Leopard was released.
Why going up in software version means going backwards in compatiblity for brand new product is really the question that puzzles me here. -
My new iPhone 4 doesn't work at all
You are definitely not alone with your issues. I'm on my second iPhone 4 unit, and am still having the same problems. I've had proximity sensor insanity, battery draining after 8 hours of stand-by (NO USE, just sleeping) to the point that my phone goes into a coma and has to be plugged in to be revived, the grip of death dropping calls....
But the single most irritating and infuriating problem is the signal strength/reception fluctuation. I share a house with two iPhone 3Gs users, and I had an original silverback iphone until July 2010. They all work fantastically well with no issues when I'm at home (where I am just about 24/7, since I work from home). *_My new iPhone 4 doesn't work at all.*_. Signal strength is all over the place. I did a test where I sat watching the bars showing signal strength for five minutes. In that time, I saw it switch from E (edge?) with full bars to 3G with full bars to 3G with 1 bar to 2 bars to 4 bars to 1 bar to "Searching." Then back to 3G, with degradation of bars from 3 to none, then E network appears again, this time with full strength. This all with the phone sitting on a table, not being touched by human hands.
It seems that my iPhone is constantly switching actual physical networks, and as a result signal strength is all over the place from one 30 second period of time to the next. This drains the battery like crazy, and means that all incoming calls go to voicemail--usually without my phone ever ringing.
The 3G phones in my house work great. The 1st G iPhone I have had since the week it came out worked great (though its battery doesn't hold much of a charge anymore, after three years). On my new IP4, games are awesome. The videos and photos are amazingly clear and high quality, and editing on the phone is out of sight. iPhone Apps rule. MobileMe syncs my contacts quickly and easy. The only thing I love more than the iP4 features is my iPad--it rocks.
Everything works on my IP4 at home BUT THE ACTUAL TELEPHONE FUNCTIONS. This is unacceptable. In late August, after two weeks in which I had 4 minutes of phone use, the nice folks at the Apple store switched me to a new phone, no questions asked. The phone worked so much better, I could send texts and place calls most of the time (this was now the first part of September)...except that now that I was using my IP4 to make phone calls, I started having a problem with the proximity sensor during those calls. I'd be talking and my cheek would mute the phone, turn on speaker, open contacts and edit info (with gobbledygook), and of course, hang up on people.
So around Sept. 18 I was told by Apple phone support to update to iOS 4.2, restore as new, and do two complete power up and drain down cycles. This would fix the proximity sensor and any other issues.
Well, I would love to see if iOS 4.2 actually did fix the PS, but I can't get the signal strength to stabilize long enough to have an actual phone conversation. I'm back to watching the signal strength go up and down at random (with me touching/holding it carefully to avoid grip of death, and also when I leave phone on the table with screen lock off --no touching). It is back to switching between E network and 3G and varying strengths of wi-fi from my home network. This eats up battery from 100% to low enough to turn off in under 10 hours of standby (usually 6-7). Essentially, my IP4 is back to being unusable as a phone.
So I did another long, involved call to Apple tech support on 9/18. They tell me that I have to turn off wi-fi, turn off 3G, turn off push/fetch and notifications, shut all apps (no multi-tasking) and do everything but switch my phone to airplane mode--and see if the battery holds up for 24 hours in standby. If that didn't work, I should restore from new, but not load any contacts or network or data or anything--just leave it as it would be out of the box new.
As a test, I turned everything off as advised: 3G, wi-fi, push, etc. Now my battery life is back to normal, where I can have the IP4 on stand-by for up to two full days before needing a recharge. Fabulous. BUT IT'S NOT A SMART PHONE if I have to turn off 3G, turn off wireless, and not use email push and so forth.
I'm so frustrated I could scream. I'm quickly coming to the conclusion that there is a significant flaw in the new iPhone. Or perhaps it is just an issue for iPhone 4 users in areas where the signal strength is marginal, or where there are two types of overlapping network coverage (E and 3G in my case). I know that the networks themselves are in good condition--though I'm in a semi-rural area, the state capital is 4 miles away, and I know they have a new tower and good coverage for the politicians and power brokers around town. The phone coverage area I live in has Edge network in the south part of the network area and 3G in the north part, which is the state capital. I'm right in between. Could this be the problem? AT&T says no, it's Apple's fault.
Message was edited by: HighSierraSo what to do besides complain? Troubleshoot?
I just wonder if all of us who have had chronic signal strength and "Searching for network" issues that totally drain the battery might have something in common, despite being all over the world? I'm using wi-fi 95% of the time, and live in a semi-rural area with overlapping networks run by same carrier. Apple folks hinted that maybe in my area the network usage is nearing capacity (resulting in getting kicked off of 3G and down to E as new calls are placed that strain capacity). They also hinted there could be interference from mountains or other objects. But here's the thing--3G phones work fine, and my IP4 works fine when I'm away from home, usually in the capital city on strong 3G network. (When I say "works fine I mean the signal is good and calls go through, I haven't tested battery drain away from home yet).
I have to conclude that the problem is the IP4 itself--something about the hardware or the software (namely, the way it connects to the phone network) is horribly wrong. Other folks who live in urban areas or with strong networks that (likely) aren't over-utilized don't seem to have this issue. After reading through these pages, it also seems the wi-fi may be a major culprit in draining the battery and in varying signal strength (this is from Apple phone support, which said that varying signal strength and the constant pinging off the home wi-fi is creating a "power struggle" and keeping the phone constantly looking for the best connection option). Mind you, 3G iphones on the same home network have no problems whatsoever.
So while I'm not a technical expert, it seems like the problem HAS to lie in the differences in the way the IP4 connects to the cellular and/or wi-fi network. And since the connection/signal strength problem was "resolved" on my replacement phone, but then "broken" again by the software update of iOS 4.2, I'm leaning toward this being a software issue. I've offered to help Apple troubleshoot, and I'm trying to be patient--because the IP4 is a work of art and I've never had an issue with an Apple product before. But all they want me to do is restore, restore, reload, restore, and then drive 1 hour to the nearest Apple store (in Reno, NV) and get a new phone...and start the whole process over again. I don't have time for this, I need my phone back.
I'm this close to trading in my beautiful but flawed IP4 for a 3G. Maybe I should just get a new battery for my original iPhone from 2007?
I understand that Apple can't test for every possible variable of use all over the world, but they don't even seem to acknowledge that they have a problem with the IP4 that will not be resolved by replacing it with a new unit. They want me to believe it's a fluke, or it's just me...but I've been combing these threads and see a lot of people reporting the same issues I am--battery drain and wildly fluctuating signal strength issues, wi-fi problems, and dropped calls. Can't someone get on this? Because otherwise Apple is going to have to admit that their IP4 is not a good solution for people who live in areas of less than perfect signal strength or use wifi or whatever demonic combo I have in my home/work setting.
Or people will have to do what I have done--if you who want the cool IP4 non-phone features, you will have to dumb down your IP4 in order to have it be even moderately useful as *a phone.* For $599 I expected better.
My (temporary) workaround?
To spare the battery:
*Turn off wi-fi (which *****, because now I have to burn minutes when I'm at work using the email, downloads, safari, etc--and it's E network, so it's SLLOOOOOOOW)
*turn off push and fetch, have mail get new messages manually
*turn off data roaming
To keep the signal somewhat stable (making it easier to complete calls and spare battery)
*Turn off 3G (this leaves me on E network--fabulous, I had that with my 3 year old iPhone)
*grip IP4 between two fingers placed at the top of the phone, away from death zone. Tough for us lefty phone users.
*pray the free bumper will a) come soon and b) help. I'm not optimistic.
To keep proximity sensor from going nuts and dropping calls, muting, turning on speaker etc:
*use headset or bluetooth (unless you are also having one of the known bluetooth issues!)
*keep phone pressed to one ear and don't move it a millimeter. Don't shift sides, don't hold phone with your shoulder, just keep it to one ear and talk fast).
I'm about out of patience. I understand that lots of folks have and love their IP4s. I'd love to be one of those people. I'm open to suggestions and have spent many hours on phone with tech support, restoring my phone, reloading data and apps--there has to be a better way.
Sorry for the thread-jacking, but someone from Apple has got to be following these threads--help us!
null -
The Game Center used to work with my Apple ID before I updated to iOS 7.4, I used to play multiple player with EA Real Racing 3 game but it doesn't work at all and every time I tried to go to the Game Center it's just blank, even to the settings nothing!
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Game Center and sign out and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
ITunes 10.4 full screen with Win7-64bit doesn't work correctly.
iTunes 10.4 full screen with Win7-64 doesn't work correctly. I have the Windows taskbar on the left side of my screen. Maximized iTunes is panned to the left.
Same issue here. When the Windows taskbar is position on the top of the screen and then the iTunes windows is maximised, it's position is as if the Windows taskbar is at the bottom of the screen so the top of the iTunes window sits under the taskbar.
For those wanting a workaround, hold shift and right click the iTunes icon in the taskbar/quick launch bar and click restore, at least then you can adjust it to be full screen manually.
System:
Windows 7 Ultimate x64
iTunes 10.4
ATI 5750 video card -
My live! platinum doesn't work on win
My sound blaster li've! II platinum doesn't work on win xp! I have tried to download drivers and install them but it's still impossible to listen to my external midi keyboard. Creative Playcenter, recorder, launcher and surround mixer are impossible to initialize....a message tell me that there's an error or that it's impossible to find drivers. I've tried to re-install everything and then install new drivers for xp but...nothing!!!
How can I solve these problems? I want again complete funcionality of my audio card!
Thanks to everyone will give me an answer...
BobiOS: Troubleshooting applications purchased from the App Store
You may want to try deleting the app and download it again. Read the troubleshooting steps. -
just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?
Castle15 wrote:
just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?
Cannot get the Apple.. what?
Model and actual device you are talking about?
Apple covers a pretty huge range.. If you mean extreme.. did you reset it to factory and start over.. that is always necessary when you change a network. You cannot pick up a router from one home and network and plonk it into another and have it work.. aint gonna happen.
You also need to power down any pure cable modem for 20min or so to get it to forget the old MAC address that captured the IP so the Apple ??? has a chance to work. -
I am trying to sign in to attend a session and it says 'Invalid user or password. Please try again.' I have reset my password and it still doesn't work. I created a new AdobeID and it still doesn't work. I need to attend this training. How can I get in?
Sorry to hear about this problem. What site are you trying to log in on? Is it a Mozilla site? Usually you don't need to register or sign in to a Mozilla site to use Firefox. Usually you can just go straight to where you want to go.
-
Hello! I have a printer,Canon MP250 and I bought a new MacBookPro with Maverick and I cannot work this printer with the driver that came with the printer and I've tried to find an update but with no success, can you help me?
Thanks!!you can try resetting the network settings in settings or you can try doing a reset - hold down the home/power button together until you see the apple logo and then release. Then wait for the phone to boot back up. You won't lose any data.
-
Why tethering with USB cable doesn't work after IOS6.0 update?
why tethering with USB cable doesn't work after IOS 6.0 update?
Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot
-
Hello,
I have a problem with my laptop IdeaPad S10e 4187-5PG: LAN with TCP/IP doesn't work, after I have updated all the drivers to the latest ones form the Lenovo site (except BIOS update). I tried to check if LAN worksby sending a ping to the IP address and that is OK, but when Isend a ping to the default gateway it failes. A ping to the DNS server also fails.Could you please help me because I tried everythinh and I can't getthe LAN to work.
Thank you very muchPerhaps you could describe you network in a little more detail.
Is this a Workgroup home network or are you connected to a Domain server?
If this is a workgroup are you connecting to the internet via a cable or DSL router?
Do other computers on your network connect OK?
Has your S10e ever worked properly on the network?
Are you connecting via a wireless access point or LAN cable?
What do you Ping on and from where?
Can you Ping OK on another networked computer?
Open up a DOS Prompt (aka command prompt, DOS Box). and type IPCONFIG /ALL <enter>. Do you get a compatible IP address and subnet mask? You should also get the gateway IP address. -
Finally got round to buying an iPhone 4, really excellent to start with. The sharing of music from my Mac Mini was excellent. ios6 update has ruined all that! The artist view miss's out most of my music and the sharing sometimes doesn't work at all!
How do I get this feature working again? I am reluctant to move to iTunes 10.7 because I don't trust Apple at the moment.My suggestion:
1) Always using MAC AIR with the power plug in.
2)Don' let the power level of battory fall under 30% percentage.
3)If the MAC can't be recharged now, just let it be with power plugged, WAIT... -
In day 4, video # Creating "pages" with Flex states doesn't work
i can't open video training http://www.adobe.com/devnet/flex/videotraining in day 4. it's name( Creating "pages" with Flex states ) doesn't work, it report error. supporter can look it and solve problem
Hi,
I'm also pacing the same issue. if click on the video in the Day 4 exercises. i don't know, what is the issue with that particular videos. and also pacing one more issue that design mode is not showing in my flash builder 4. if u have any ans plz help me out. PFA
Maybe you are looking for
-
HELP regarding reconiciliation of Purchase orders system
What the need is: A report per country that shows PO no., amount of PO, Goods recived amount and total invoiced amount by a date, because the total amount of the GR amount for the country has to be identical with the open amount on the GL account. A
-
Environment - Single File Server & 6 workstations. I have a single generic user account/profile and log on to all 6 workstations at the same time (1 user, 1 password, 6 workstations). I need to run firefox on all the workstations with the same user a
-
How do I get a replacement for a broken phone when I did not have insurance on it?
So my phone apparently got some dust and dirt in it. Tried to clean it out with a qtip and rubbing alcohol, but to no avail. It was literally sitting on my desk still doing things like buttons were pushed. There is nothing to be done about it, it's p
-
Hi, I have been getting a number of core dumps from an eclipse RCP based client java application. Its running on the following solaris box: SunOS 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Fire-V240 with following java configuration: java version "1
-
How to mirror Safari on iPad to Apple TV?
How to mirror Safari on iPad to Apple TV?