New T500 does not detect Wireless

I have out of the box T500, windows vista business. On openining i ran windows update. Then i tried to configure my wireless, but fn+f5 gives on/off option only for bluetooth. (wireless radio is not shown there). I've tried lenovo system update - no luck. BIOS wifi configuration is set ON. Help, dont know what to do.

solved. bios security was still disabled, after that wifi driver update fixed the problem.

Similar Messages

My apple tv does not detect wireless router sitting next to it

I have my Apple TV sitting just few feet away from my router. It does not detect my router. So I added the IP addresses manually. Under Apple TV Network settings, it still says Ethernet. What can I do to get AppleTV to detect my Wireless rouer?

Did you unplug the ethernet from AppleTv not just the router? I've found even a non-terminated cable plugged in disables wifi.
Daft as it sounds, sometimes if the router is too close it can cause communication issues over wifi.
If ethernet was working, why change to wifi?
Can you confirm ethernet does still work and that AppleTV is not just 'stuck' in ethernet mode.
Unplugging was a good test as that often corrects issues.
It is possible your AppleTV software is somehow corrupted - restore via itunes using microUSB to eliminate that possibility, or that AppleTV hardware has failed and is 'stuck' thinking ethernet is connected.
AC

MacBook pro does not detected wireless network?????

Hi! I have an airport express that provides the wireless network for the house. My iMac and iBook as well as iphone have no problem detecting the network. But the network does not show up in the drop down list that shows up when I turn the airport on. When I click on "other" and type in the information that way, the connection times out.
Any suggestions would be appreciated!
Thx!

I have a similar problem. When I set the network to not be closed, My MacBook Pro finds and connects when I return from being away. When I set the network to be "closed", it will not connect automatically (I have checked "Remember and network this computer has joined" & "Remember this Network ") it will not join automatically. However, when I enter the name and password, it connects and all is well. My iPhone will automatically connect regardless of the "closed" being checked or not. Any suggestions? I would prefer to retain the "closed" setting for extra security.
Thanks,
Bruce

Airport does not detect wireless network; it says problem = [network]"connection timeout"

It is not a problem of signal strength, and my Airport detects other networks. It used to detect the network I want to connect to, for two years. It suddenly stopped detecting the network (which is WPA Personal password-protected). When I select choose other network and type in the password, it won't connect to it claiming "connection timeout."
This happened before. Then after several days, Airport was able to detect and connect to the network I want. Now it again won't detect the network, and this seems permanent short of taking measures to address the problem. Should I try connecting manually to the network, and hodo I got about that? Thank you to anyone out there ho might be able to help.

i have a macmini (OS 10.5) and use a belkin wireless router. When I turn on Mac address filtering on the router I have an Intermittent problem. The airport does not recognize the wireless network. On the network preferences panel there is a message that the airport is using a self assigned IP address. sometimes the message says the airport has no IP address. If I turn off the Mac address filtering and use a WAP password only the network is recognised and connects without a problem. How do I resolve this? I dont have the problem with a iBook using system 10.4. Is turning off the Mac address filtering secur?

Satellite 5200-903 does not detect Wireless Adapter

hello everybody,
I wonder if anyone can tip me on this one...
Since I reinstalled the OS ( have XP pro SP2 ) PC seems not detecting anymore the WIRELESS adapter in Device manager under Network Adapter.
Also the light of the wireless switcher does not turn on anymore.
I am also having problems to access the BIOS to check if the adapter is detected there, I do not have a Toshiba HW setup in Control Panel as indicated in the manual.
Any suggestions?

Hello Juliana
The question is how did you install the OS? If you use recovery CD all tools will be installed including Toshiba HW setup. If the unit is preinstalled with Microsoft WXP CD you must install all Toshiba stuff belatedly.
Just short explanation about WLAN card. Basically if the light of the wireless switcher does not turn on thats clearly indicate onto hardware problem. I assume that the WLAN card is defective. Check also if the card is listed in device manager.
If you want to enter BIOS settings pres ESC button at the boot up procedure and keep it down for a few seconds.
Bye

New iMac does not detect my Sony HDR video camera

I just purchased a new 24inch (2.8Ghz) iMac with Leopard installed. I wanted to try making a short home movie using iMovie but my Mac cannot seem to make a connection with my Sony HDR-HC3 video camera. It doesnt even detect it. Can anyone tell me what i'm doing wrong?
The Sony HDR-HC3 uses an iLink (firewire 400) cable to connect to the Mac. The camera did not come with a supplied iLink cable and i had to buy a compatible iLink cable made by a company called EDM. Surely it cannot be the cable that is causing this problem?

Good advice.
I thought what i did were normal steps, that's why i skipped those..
What i did:
1. Search thru this forum. And find out all relevant threads, inclusive trying whatever methods suggested... (i suppose i have screened through all)
2. Besides image capture, i went to system profiler and click on the USB, nothing was shown when USB was plugged. (i tried with my FUJIFILM FINEPIX F30, which worked well)
3. Visited Sony support website (obviously not as friendly as apple's site)
i don't know what else i can do. I have even tried to kept Switching on/off the camera, pluged out my mouse/keyboard while trying, restarting the Mac...
MANY THANKS AGAIN!!
p/s-by the way, saw some threads that said solution in card reader (i don't have any).

Brand new iMac does not work wirelessly

This is a very strange situation and I don't know how much to be concerned about it.
6 weeks ago I bought the first of two brand new iMacs. We have two old G4s both wired into a Netgear wireless router, plus the printer. The first new iMac when switched on, immediately found the Netgear and has worked perfectly, wirelessly, ever since. As it should.
Less than a week ago I bought the second new iMac, which is identical to the first. I put it on the _same desk_ as the Netgear, therefore a distance of only one foot. Straight out of the box, it worked wirelessly to register itself with Apple.
Since then, it has only worked wirelessly very intermittently, and then very slowly indeed. I was wasting far too much time trying to figure out why the wireless did not work, and eventually wired it into the router too.
I was attempting to set up a network with 2 old G4s wired in, and 2 new iMacs wireless. Now I have 3 wired in and one wireless.
Is there something wrong with the second brand new iMac? Or is there some line I should be pursuing with Netgear?
I have written all the IP addresses down in case anyone responding - and I sure hope SOMEONE responds! - thinks that this may be a clue.
Many thanks in advance to all and any replies.

Update: I'm posting this in case it helps others......
I phoned the software support which comes free for 90 days with a brand new iMac.
The bright young man there instantly knew what the problem was, because he'd seen it all before. There's nothing wrong with the iMac and it has nothing to do with IP addresses.
I have to go into the Netgear configuration screen and Enable MAC filtering. This means I'll give the router the hardware addresses of the two iMacs and it will then allow both of them to communicate wirelessly - but no other devices which might be lurking in the vicinity.
Sounds good to me.

Spotify Connect - Does not detect Denon Ceol N9

Hi, I have installed the spotify app (using premium) on my HTC one m8 (Android 5). While I am able to detect and play music to my wondows 7 laptop, it does not list my Denon Ceol N9 network player, and I am unable to stream music to my stereo using spotify connect. I have followed the (very short) instructions listed here: http://manuals.denon.com/RCDN9/EU/EN/ZHOBSYxvrwcwjl.php on how to use Spotify Connect on my Denon, but unsuccessfully so far. The units are all connected to the same wifi, but the Denon Ceol N9 is not lised in the spotify app. Any tips on what I am doing wrong? Some settings I need to enable to make this work? Help would be much appreciated :) - Petter

My Spotify connect (new versions) does not detect my Denon Ceol Piccolo, My Coel Piccolo is connected to internet wifi or even ethernet cable but non of them results of my Spotify (in other device as iphone or desktop computer) detects My Denon Ceol Piccolo. I also tested to unplug but nothing changes, understand there is problem with connect?, I remember a couple of months ago I could connect as it was detected by iphone (never by my desktop computer

Tecra Z50-A-11V: New SSD but Win 8.1 does not detect it

We bought a Crucial M550 256GB disk and want to replace in a Toshiba Tecra Z50-Av1
We do not want to make any transfer of data or cloned.
We want to do a clean install with Windows 8.1
The BIOS recognizes the SSD
But when you install Windows 8.1 does not detect any disk connected to the unit and requested additional drivers. Windows not detect drive
https://www.dropbox.com/s/mlvk6v3lxzi1rrh/2014-05-04%2009.47.18.jpg
https://www.dropbox.com/s/fr2eo5l9xonaoln/2014-05-04%2009.48.59.jpg
https://www.dropbox.com/s/8usxog8wm06funr/2014-05-04%2010.06.09.jpg
i too test with lasted version of this driver (old F6 in boot to locate hdd driver)
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23496&lang=eng&wapk w=f6flpy-x64.zip
and with toshiba package
http://support.toshiba.com/support/viewContentDetail?contentId=4004211
you can see than i have 3.20 version of BIOS. interestingly I see that the last one is the Toshiba has released version 3.1
But always the drive CRUCIAL is not reconized by the boot instalation of windows
The problem is similar with ubunto, kubuntu, .... the drive is detected with the BIOS but not for the OS.
any help?
Thanks

Hi
Did you solve this issue?
Could you install the Windows 8.1 system on this SSD drive?
I think the additional driver installation while setup procedure isnt necessary since Win 8.1 should already contain the essential drivers.
From my point of few there could be an compatibility issue (maybe SSD firmware update would solve this).
How about the usage of other SSD drives? Do you have the same problem using other SSD drives from other manufactures?
Feedback would be appreciated.

My new MacBook Air shut down +does not detect battery + won't charge

My MacBook Air is only a few months old and at random it shut down and when I restarted it the computer did not recognise a batter. I tried to charge the MacBook but the light on the charger did not turn on at all and the charger was not recognized at all. The MacBook does not detect any wifi's at all aswell

You have to take the computer to the Apple store to have it checked out.
Try resetting SMC before that.
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

Satellite Pro C660-1NQ does not detect WLan network

Hi Guys,
We have a Toshiba Satellite Pro C660-1NQ here which does not detect the wireless network at all,
I have checked device manager and the wireless card does not show in here.
I tried scanning for new hardware,but nothing was found. I tried turning the wireless off/on with the function and F8 keys but still not showing in device manager or finding any new hardware.....
Any ideas as to what i can try next?
Cheers,
Ash

Hi
It seems that the notebook would support the Atheros 802.11agn Wlan card.
Usually the Atheros Wlan card should be listed in device manager under in the menu Network Adapters.
If its not listed then I recommend installing the WLAN driver which can be downloaded here:
http://aps2.toshiba-tro.de/wlan/?page=downloads
Choose the Atheros Wireless LAN Adapter Windows 7 (32/64) 9.2.0.419.0 or newer
Hope this helps to detect the Wlan chip!!!

Itunes 11.1.4.62 does not detect existing iphone or ipad

Just downloaded the above, and now on plugging in either my existing iphone or my Ipad via wired USB connection, itunes does not detect the device. Running windows 8.1, Tried updated iphone software to match as well, still no detection. Am I missing something on the new version in set up or something, or is it an uninstall and reload?
Thanks

Have tried different cables as well

HT1296 i just downloaded the latest version of itunes but now i cant zync my ipod. i tunes does not detect my ipod. ut just to work perfectly with the older version of itunes but not now. what is something i can do?

i just downloaded the latest version of itunes but i cant zync my iphone nor my ipod. it just to work perfectly with the older version of itunes but now itunes does not detect my ipod nor iphone. i have a windows pd and iwindows detects the iphone and ipod. what is something i can do to fix the problem??

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests

IdeaPad s206 Windows 7 Home Premium 32 bit does not find wireless after clean install

Dear Friends,
After installing Windows 7 Home Premium 32 bits on my new S206, the operating system does not recognize wireless device. Any suggestions?
(I'm not a novice, but I spent a few good hours on this issue already and didn't make any progress whatsoever
Need your help!
Thanks in advance.

hi david-breitgand,
Please Check under Device manager
                  Under Network adpter it should show Broadcom 802.11 /
11b/g/n Wireless, Realtek Wireless or Atheros Wireless,,
If non
Check for any Device under device manager that has a yellow Symbol, like an exlamation mark sign,
              It should say Network Controller
>if this is the case, Download a Driver from Lenovo Support Website,
-If there is no such Icons-
Check Your BIOS Settings,
   Keep on hitting F2 right after you power on the system, This should boot you to BIOS
Go to Configuration TAB and look for Wireless Option and Make sure it is enabled
hit F10 to Save your changes and Exit
Hope this helps,
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Can't install Win 8 - Satellite Pro C660 does not detect HDD

Hello,
My HDD has died, so i decided to upgrade my Satellite Pro C660-1D9 to an SSD.
I made a bootable USB with Win8, and booted just fine.
The problem is that it does not detect my SSD so i can proceed with the install.
SSD shows up in BIOS, but not in Windows install.
It says there's a driver missing.
I downloaded AHCI drivers (XP, only ones available) and even then, after selecting the only driver that appears, it says no new devices found.
I tried changing SATA mode from AHCI to Compatibility mode and it's the same..
What can i do?
Thanks for the help.
Best regards,
Bruno Moreira

Older Windows XP required an AHCI driver from Intel but I think this isnt a missing SATA driver issue because as far as I know Windows 8 as well as Win 8.1 already contains the drivers in order to recognize the HDD or SSD drive.
Furthermore the OS installation should be possible even if the driver would not be added... for this procedure you have to use the "compatibility mode".
As you said, the compatibility mode did not work too, so I think there is another problem.
However, Toshiba driver page provides also an Intel RST (Intel Rapid Storage Technology) driver (Windows 8 - Upgrade) which you could try to add while OS installation.
But Im wondering if you would be able to install this Win 8 on common SATA HDD.
Did you try to format the SSD drive using another computer and then to install Win 8?
Try it out.

New T500 does not detect Wireless

Similar Messages

Maybe you are looking for