New T61 will not power on unless plugged into AC Power
Hello all,
I am a new owner of a T61 laptop and so far I love it. Though, I have found something rather weird. I cannot power on my laptop with just battery power. I have to plug it in to power it on. From that point on, I can run off of battery power. I have a 9-cell battery. Once the laptop is powered up, it reads as 100% battery power. I would really appreciate any ideas or tips that anyone may have.
Thanks
Ryan
Sounds like a bad battery. We received a shipment of 30 T61's in which 17 of them had bad batteries straight out of the box. Exact same symptom as yours. You should contact your Lenovo or the store you bought your laptop from. Last year, Lenovo recalled defective batteries for T60s.
Similar Messages
-
My iphone is fully charged but it will not turn on unless plugged into a charger
my iphone is fully charged but it will not turn on unless plugged into the charger in the wall, it wont even turn on when connected to the computer!!!!!!!
Hi there. Any luck with your phone? I'm having the same problem
-
My sons iphone will not come on unless plugged into wall charger. even then wont work
my sons iphone will not come on unless plugged into the wall charger. even then when the screen finally comes on it has the wrong date and just says searching. wont do anything.
What troubleshooting have you tried? Try a reset, hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should reboot. If it does not, then you need to try and restore via iTunes. Try connecting the phone to the computer and iTunes and see if it is recognized. If not, you will have to force it into Recovery mode and restore. See this support document for that help. http://support.apple.com/kb/HT1808
-
Iphone will not turn on unless plugged into outlet, and then says activation needed
It worked fine before class, when I left class to check my phone, it wouln't turn on. If I plug it into the wall outlet and it shows the red battery indicating it has no charge, then goes to the apple logo screen for a few minutes before turning on and saying activation required. It was trying to make me go through the steps of activating it. If i unplug it, it will turn back off. It will not power up if I plug it into the computer, and it does not show up as a device on my computer. I have tried holding down the home and power button to reset it, and this does not work. I bought the phone when it first came out, Im trying to avoid taking it the the Apple store because it is 2 hours away.
What troubleshooting have you tried? Try a reset, hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should reboot. If it does not, then you need to try and restore via iTunes. Try connecting the phone to the computer and iTunes and see if it is recognized. If not, you will have to force it into Recovery mode and restore. See this support document for that help. http://support.apple.com/kb/HT1808
-
My iphone will not come on unless plugged into the wall charger
my iphone 4 went completely dead since then i tried chargeing it with a charger bought from sams wholesale which was an aftermarket charger which did not work i then plugged it into the factory wall charger it comes on but says searching for signle i talked to apple support ny telephone and they said i need to restore my phone but unless plugged into the wall the phone will not come on please advise on this
rustyfromhouma wrote:
i do not have anything on my phone stored
If you mean you didn't backup or sync your phone, everything on it will be lost when you get a replacement unless the techs are able to do this. Apps can be re-downloaded. -
My Ipod touch will not turn on unless plugged into a dock
When I try to turn my Ipod touch on, the apple will show up and then shut down.....I found that it will turn on and work if it's plugged in on my music dock, but the second I take it off it goes dead, even though it says the battery is full.
I'd appreciate it if anyone has any suggestions!Have you tried the standard fixes:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If you still have the problem then you likely have a hardware problem like a bad battery. -
My macbook will not stay on without being plugged in. I had my macbook for about 3 years and the battery had less than 200 cycles on it and the computer suddenly would not stay on unless plugged in (went from holding about 1.5 hr charge to not holding charge at all). I purchased a new battery and this battery has 118 cycles on it. It is doing the same thing. When I unplug it the computer shuts off immediately. It will not stay in sleep mode either. What should I do? I assumed that it was because I tend to leave the computer plugged in so that the cycles stay low, but after only 118 cycles? (and the new battery is less than 8 months old). Could my computer be failing to register the battery? Please help me - I don't want to have to spend another $80 on a battery. (Just so you know, I have removed the battery and made sure the connection is good but this did not help.)
If your problems with the new battery are the same as the old battery, it would seem your Mac isn't charging the battery properly.
Perhaps it's a Magsafe/charger issue.
Read through the power section of this User tip here, try everyting, including the SMU Reset and see if that makes any difference.
https://discussions.apple.com/docs/DOC-3046
We can't do too much more than that as it seems to be a hardware issue and we can't fix that too much. -
Ipod touch will not turn on unless plugged in
My Ipod touch will not turn on, Ive plugged it in and it comes on it has a charge but as soon as I unplug it it goes black ... I have tried to restart it but there is just a black screen
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order -
Treo 700WX new digitizer will not power up.
I recently replaced my old, scratched digitizer with a new one. After carefully following the directions on replacing the digitizer, the end result was a dark screen. I tried reinstalling my old digitizer and now it will not power up. Interestingly, I can still use the phone to call out, however, the key pad will not work to connect to incoming calls. I hear all the normal sounds but no screen. Can anyone help me or do I have to shell out $$$$$ to Sprint?
Post relates to: Treo 700wx (Sprint)Try a soft reset - remove the battery and put it back into your device.
-
New iphone4s will not power on
Just got it shipped to me today took it out of the box and it will not come on, changed it for an hour and it still will not power on?
I too had a similar problem. The brick went bad.
I had to use a Fluke meter to measure the voltage at the tip, as there is no light on the brick, nor is there a functional light on the computer.
Yes, it is supposed to flash a couple of time if there is juice in the wire, but my issue, was that it supplied power, but failed under computer drain initially, until it gave up. My screen kept flashing when power was on, and power was off. Effectively, the screen became my power indicator.
Having had similar issues in the past with switching supplies that had a thermal breaker built in, I waited hoping it would reset. BUT, no light on either the brick or the computer, just wasted my time trying to solve the problem the normal way. If there was a light, you would know immediately. It finally gave up life, and never revived. No light on the brick, and NO indicator light on the W540.
The new brick was made by another vendor, and runs much cooler. If you want the markings on the broken brick, v.s. the new one, just ask.....
Not acceptable, but stuck with this..... At the end of the year, someone at Lenovo will get a raise, based on sales....
My productivity is going down! -
My brand new iMac will not power up after an update restart, any suggestions?
Any suggestions on why my IMac will not power up after it done a restart?
Try an SMC reset and PRAM reset: https://discussions.apple.com/docs/DOC-3603
If that doesn't help:
See if it will start in Safe Boot: restart holding down the Shift key until you see a grey progress bar, type your admin password when prompted, let it continue to (hopefully) boot. Restart as normal from the Apple menu.
If that didn't help, try booting into the Recovery HD: restart holding down Command+r and choose Disk Utility from the four choices when they appear on screen. Once DU has launched select your Macintosh HD on the left and click on 'repair disk'. If anything gets changed click on repair disk again until you get a clear pass, restart as normal from the Apple menu.
If you still have problems, give AppleCare a call. -
Hi,
I've ordered a new iPad 64Gb which will arrive early April. My hobby is making music, so does anyone know yet if the new iPad (3rd generation) will support a USB microphone plugged into Garageband via iPad's USB Camera Adapter? I am hoping to use such a portable setup to record live performances of voice & acoustic instrument.
Thank you,
John.When in doubt, try it out. I bought the Apple camera connection kit & used it to connect my Blue Snowball usb mic to my new iPad 3rd generation. It works just fine. I made some test recordings in GarageBand on my iPad 3 using my Snowball mic. They sound great.
-
MY NEW IPHONE WILL NOT POWER ON
my iphone 5 will not charge
I just got my Apple Apple Iphone 5 32gb Verizon, Oct 5th 2012. I am one the first customer to recieve this phone, from Verizon Wireless. I have my old Apple iphone 4, I did a Backup of stuff on my Iphone 4, I tried restore my back up from iphone $, on my new Iphone 5, it finshed! I looked at Iphone 5, The restore was finshed, all my stuff was transfered, Great! This phone run faster than my old iphone 4.
Okay, I called Verizon to activate the , on the Verizon Wireless network. So, I made call on The Verizon Wireless network, and my phone crashed!! blanked screen! MAC OS 6 crashed! So ! Paniced! The phone went dead! Until I reset the phone pressing the power buttun. I had restore MAC os6 over again. Right I had take this off the Verizon Network, restore access to my old Apple Iphone 4. Right now I have restored the MAc os6 back on my Iphone, works, but the can't call anywhere, it is set airplane mode. Today! I tried dial 611, this is a Ipod iphone5 32gb for mow. I need to fix, reporgram? or what? I need help!!! -
Will not turn on unless plugged in to power cord
So I have had my Macbook Pro for about 9 months now. Just today, I unplugged my laptop and it immediately turned off. I tried turning it on; I could hear the optical drive spinning up for a moment, and then the computer would suddenly turn off again.
The battery appears to be fine (I checked the charge indicator on the bottom, and it is fully charged), and my power cord seems to be ok as well.
Any help?My MacBook Pro is just 4 months old and suddenly it would not operate without power adapter attached. Reset PMU and PRAM to no avail. Repaired permissions and did an fsck in single user mode, again to no avail. Even tried booting in 10.4.10 on external drive which was fine, except laptop would still not work with out being plugged in.
Called Apple. They asked if I had a colleague with a 15" MacBook Pro from whom I might "borrow" their battery from. Luckily, I did! I replaced my battery with hers and bingo! Laptop worked without using power adapter.
Apple is sending new replacement battery.
Another co-worker had the same thing happen to his MacBook Pro this afternoon and his laptop and mine were purchased in the same week.
Wonder if there is another batch of defective batteries springing up. -
New W540 will not power on any longer
Short story:
W540 config below
Arrived, bios 2.09, set intel rapid boot off
worked for 1 week
Then it refused to power on
No indicators when battery plugged in and power or battery plugged in and no power.
with power, and no battery only the power button blinked 2x. No other response.
Lenovo's action: return and get a new system. After waiting 6 weeks to get it, this is not what I expected froma rather expensive system. I should have heeded the warnings on this list.
I see on another list tthe E440, ithink, it was a cmos battery issue. Does anyone know what the issue is with the W540?
Thanks.
Ordered config
Base Model
20BHA0A4CC
Component
Description
Shipping Country
Canada
Selectable Warranty
N03_3YRDEP_CI
Preload Type
STANDARD_IMAGE
Preload OS
Windows 8.1 64
System Unit
W540 NVIDIA Q1
Processor
Intel Core i7-4800MQ
Security Chip 2
Security Chip Enabled
Wireless WAN accessories
MBL BB upgradable, future use
Display Panel
W540 15.5 3K IPS WWAN
Pointing device
W540 FPR
WiFi wireless LAN adapters
Intel 7260 BT ACBGN
Hard drive
500GB HDD 7200rpm
RAID Setting
Internal RAID - Not Enabled
Optical device
Travel Bezel, Fixed
Battery
6cell Cylindrical 56.16Wh
Total memory
8GB PC3-12800 DDR3L (2 DIMM)
Camera
720P_HD_CM
AC Adapter and Power Cord
170W AC Adpt2 US (2pin)
Keyboard Language
KYB w/NumPad US English
Publication Language
Pub; US English
Preload Language
W8.1 64 EnglishI too had a similar problem. The brick went bad.
I had to use a Fluke meter to measure the voltage at the tip, as there is no light on the brick, nor is there a functional light on the computer.
Yes, it is supposed to flash a couple of time if there is juice in the wire, but my issue, was that it supplied power, but failed under computer drain initially, until it gave up. My screen kept flashing when power was on, and power was off. Effectively, the screen became my power indicator.
Having had similar issues in the past with switching supplies that had a thermal breaker built in, I waited hoping it would reset. BUT, no light on either the brick or the computer, just wasted my time trying to solve the problem the normal way. If there was a light, you would know immediately. It finally gave up life, and never revived. No light on the brick, and NO indicator light on the W540.
The new brick was made by another vendor, and runs much cooler. If you want the markings on the broken brick, v.s. the new one, just ask.....
Not acceptable, but stuck with this..... At the end of the year, someone at Lenovo will get a raise, based on sales....
My productivity is going down!
Maybe you are looking for
-
"Edit in Adobe Photoshop CS6" no longer works in Lightroom 5.3
I have LR5.3 and PS CS6. Since I've updated camera Raw (8.3 it think), my files won't open when I want to edit them in Photoshop from the "Edit in-" feature of Lightroom. I don't see the window saying "Open in PS with Lightroom edits" that would give
-
COPY_REGION & SELECT_ALL - not working correctly
Hi there, I have menu items for copy and paste. Here are the properties Menu Item Type: Plain Magic item : None Command type: PLSQL visible in menu: Yes visible in horizontal menu tool bar : yes visible in vertical menu tool bar : no icon in menu: No
-
Change Tracking in SQL 2012 - Behavior Change
Hi, We observed some change in behavior for Change Tracking feature in SQL 2012 Express. Sequence is as follows, CT is not enabled at DB level. (Of course at table level too) Created and populated table CTTEST with some rows, say 10 rows Enabled CT a
-
I can't remember my password to ichat
how do i reset the password and /or user id for i chat?
-
How do i copy a playlist from itunes to my phone?
How do I copy a playlist from iTunes to my iPhone? I thought I could just drag it up but it won't let me.