New tab for Contract for data about products and product sales.

Looking for ideas to implement a new tab on the Contract (RECN)
We have some basic data about products and product sales that we want to have implemented on a screen tab for a contract. The user needs to be able to enter information about a product, quantity, year grown, and tax info. And then each of these products may have one or many sales records showing date of sale, quantity sold, and a brief note.
So a contract can have 1 or many products and a product can have one or many sales records.
The user needs to be able to enter, update and delete any one of these records. And, ideally, enter multiple of each before saving.
Do any of you have ideas about how to go about this? Using ALV grids? or table controls? I'm still wet behind the ears regarding doing screen development in SAP so am open to any and all suggestiions.
SAP 6.4 is the version we are at.
Thanks
Laurie

Maybe the original order to renew and keep unlimited data was cancelled because it was not an option. It wasn't a "bait-and-switch" The order was cancelled, it wasn't switched. When you called to reissue the order they told you the correct options so they did not switch you without your knowledge. The second rep was correct, he didn't lie, the first rep did. Verizon cancelled the order because if they didn't you would have been set up w/ new 2 year agreements on a tiered data plan, which would have been illegal. Thats why they cancelled it. So you can either not make the change, keep the unlimited data and buy the phones outright. Or switch, go to a tiered plan, and get new phones. By glitch they meant the system accidentally allowed you to keep the unlimited plan, though it was not an option. Verizon has had this rule since they removed the unlimited plan back in '11.
<< Full name of rep removed >>
Message was edited by: Verizon Moderator

Similar Messages

How to add new tab after reason for rejection tab using tcode va01

Hello,
how to add new tab after reason for rejection tab using tcode va01.

Hi,
You can check this link...
Hope it will be helpful to you.
[https://forums.sdn.sap.com/click.jspa?searchID=23016273&messageID=6825861]
[http://www.sapdevelopment.co.uk/enhance/fexits.htm]
-Maharshi
Edited by: Maharshi Vyas on Mar 3, 2009 12:45 PM

How add new tab after reason for rejection tab using tcode va01

Hello,
How to add new tab after Reason for Rejection tab using tranzaction code VA01.
pls suggest solution.

I don't think you can add a tab after reason for rejection tab. There are custom tab, which you can use for your convenient, given by SAP. You can look into the below details:
Program : SAPMV45A
Screen: 8459(Item) and 8309(Header).
Kuntal.

How can I download Micosoft Office 2008 for Mac on my new Macbook Air? I have the DVD and product key

How can I download Micosoft Office 2008 for Mac on my new Macbook Air? I have the DVD and product key

Welcome to Apple Support Communities
You have two options:
1. If you have another Mac or PC, use Remote Disc to install it on your Mac > http://support.apple.com/kb/ht5287
2. Buy an external optical drive and use it to install Microsoft Office.
Both options work correctly. If you are going to use the optical drive once, use Remote Disc, but it will be much slower than using an optical drive connected to the computer

If i open a new tab Firefox freetz for some secounds

If i klick a link for opening a new page in a new tab, Firefox freetz for some secounds.

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "Continue in Safe Mode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

We are all iphone users just like you.
Do you have a question for fellow iphone users?

Is there any way for updating wrong data in ODS and infocube?

Hi all
Is there any way for correcting wrong data in ODS and infocube?

You could do a selective deletion, by specifying the filter values, so that you only delete a subset of the entire data. You could then do a re-load for the same selection so that there is no duplication of records.
This is on the assumption, that your incorrect data is due to some incorrect update or transfer rules, which you have now corrected (before the re-load).
mate, you have mentioned that You could then do a re-load for the same selection .
could you please tell me how to do a re-load ? thank you very much

I can't open a new tab unless I right click a link and hit "open in new tab"?

I can't open a new tab unless I right click a link and hit "open in new tab."
I click ctrl+t, click the new tab button, right click the tab bar and hit "new tab", and even click "File" and hit "New Tab", but it still won't open a tab!
This has been going on for a week!
I know it may not seem like too much of a problem since I can still open a tab, but it's terribly inconvenient that I can only open one by clicking a link.

The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

My macbookpro opens new tabs every time i click a link and opens to mackeeper

my macbookpro opens new tabs every time I click any link and it opens to a page thats always something about speeding up my mac or cleaning my mac.. this is annoying and i just wanna see how can i stop this or if theres any program to clean my mac?

Click here and follow the instructions, or if desired, run Adware Medic.
(114741)

Can i install cs 6 on a new powerfull computer ? I have license code and product code

can i install cs 6 on a new powerfull computer ? I have license code and product code. I buy a student & teacher edition up 2013

Sure. It's yours.
Mylenium

How to automatically update products and product categories?

Hi friends
How to automatically update products and product categories.Is it possible?
regards
venkat

Hi,
The delta load does not work for product categories but only products.So to bring in the new product categories into SRM you will need to start the load of the object DNL_CUST_PROD1 again.
The CRM middleware allows the following two methods for replication.
-Initial loads:
Launched manually (R3AS), the objects (customizing or business) are replicated between SRM and R/3, according to the filters you've put on the object (R3AC1 for Business objects like MATERIAL, R3AC3 for customizing objects like DNL_CUST_PROD0 and 1).
-Delta loads:
This option is only possible for Business objects, which is the case of MATERIAL.
With this option a daemon is launched between the 2 servers. Every modification made on an object on SRM or R/3 is transfered as soon as this object is contained in the filter retrictions (creation and/or modification). this is done through transaction R3AC4.
Also refer the foll thread:
Material group from R/3 to COMM_CATEGORY (SRM)
Related notes : OSS notes 872819 and 720819.
BR,
Disha.
DO reward points for helpful answers.

Create product and product category

hi,
can anybody explain me how to create product and product category in gateway services.
thanks&regards in advance,
Haritha

Hello Haritha,
I do not know about the logic which are supposed to be used to accomplish ur business scenario.
But Once u know the underlying code/standard FM to be used, then u can follow the below which will help u get info on how u can consume those business logic inside GW and expose it as service.
1.Let’s code CRUDQ and Function Import operations in OData service!
2. How To Batch Multiple Operations Into A Single Request
3.How To... Create Complex Business Entities using the Gateway OData Channel
4.Purchase Order: Create OData Service in the SAP NetWeaver Gateway System for CRUDQ Operations
5. Implementing Expand Entity/Entity Set
6. Detailed step by step procedure for Creating Gateway Service with all the CRUD Operations and testing them in Service Explorer Part1
7. Step by Step development for CREATE_DEEP_ENTITY operation
U can also search in the forum for additional info as well.
Regards,
Ashwin

Can Tcode exist in Pre-production and Production without transporting it...

Hi ABAP Guru's,
Can a T-code that has been created in Development system saved in a package be available in Pre-production and Production environment without transporting it.
Apt answers will be rewarded.
Raghav

Hi,
I hope it is not possible in normal scenario. But it is possible if below thing has happend.
eg: U created a transport in development system and assigned to some package/development class.
If some one created another TR and transported the whole package to quality/production then your transaction code will also be tranported but ur TR will not be. This i am not sure. But still....i think this can happen.
Check the above thing if it has happend.
Thanks,
Vinod.

User exit for contract start date in sales order change mode.

24.10.2008
Hi Gurus,
I need to disable the 'contract start date' (VEDA-VBEGDAT) field in Contract data tab at header and item level. Can someone suggest a user exit for the same ???
Regards,
Udaynath

Dear Udyanath,
Please check these User exits with the help of ABAPer
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document
processing are listed below.
USEREXIT_FIELD_MODIFICATION
     This user exit can be used to modify the attributes of the screen
     fields.
     To do this, the screen fields are allocated to so-called
     modification groups 1 - 4 and can be edited together during a
     modification in ABAP. If a field has no field name, it cannot be
     allocated to a group.
     The usage of the field groups (modification group 1-4) is as
     follows:
-   Modification group 1:   Automatic modification with transaction
         MFAW
-   Modification group 2:   It contains 'LOO' for step loop fields
-   Modification group 3:   For modifications which depend on check tables or on other fixed information.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document
header level. It is described in the section "Transfer of the
customer master fields into the sales document".
The user exit is called up at the end of the FORM routine
VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document
item level. It is described in the section "Copy customer master
fields into the sales document".
The user exit is called up at the end of the FORM routine
VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of
the sales document schedule lines.
The user exit is called up at the end of the FORM routine
VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer
master fields into sales document".
The user exit is called up at the end of the FORM routine
VBKD_FUELLEN.
I hope this will help you,
Regards,
Murali.

Website opens new tabs in Safari for iOS7; popup blocker is on

How can I stop a website from spontaneously opening new tabs? I have the popup blocker on, but it doesn't prevent ads from popping up in new tabs on some websites.
Also, is there a way to stop banner ads from spontaneously opening the App Store?
Thanks!

1. Settings>Safari>Clear History, Cookies and Data
2. Hold the Sleep/Wake and Home button down for about 10 seconds until you see the Apple Logo
Note: Keep away from those web site

New tab for Contract for data about products and product sales.

Similar Messages

Maybe you are looking for