New tab implementation at item level in ME21N/ME22N/ME23N.

Hi Friends,
I have implemented two badis 1. ME_GUI_PO_CUST and 2. ME_PROCESS_PO_CUST to get a new tab at item level in ME21N/ME22N/ME23N, I could see this new tab only in ME23N but not in ME21N/ME22N, and I found that Badi ME_PROCESS_PO_CUST is not getting triggered for any of these tcodes : ME21N/ME22N/ME23N. Can anybody help me getting this issue resolved with coding example as well.
Thanks in Advance.

Hi Know ,
I know that we have to use the following BADIs
ME_PROCESS_PO_CUST
ME_GUI_PO_CUST
But I does not know what are the methods to be implemented
and what is the code we have to write in that methods .
Thanks in advance ,
Siva.

Similar Messages

New Tab on header level for me21n/me22n/me23n

Hi Friends
i have created a new tab on the me21n/me22n/me23n header level using the exit
MM06E005 , The tab is displayed but i am not unable to udate the records into the
EKKO Table whereas i have added my field in the include of EKKO CL_EKKODB
Kindly somebody help me with elaborated steps .
Thanks & Regards
Digvijay Rai

Hi Digvijay,
Once the data is entered on the screen ..code is written to update the table ie...
flow of data from custom screen for header is OK..but for display and change we need to
import the data in a similar manner to the customer subscreen or the tab added in header level
As you can see the following 3...code must be done in EXIT_SAPMM06E_006/007 to fetch data to customer subscreen for display/change actions..use 006/007 for PBO/PAI actions..
EXIT_SAPMM06E_006   Export data to customer subscreen for header(PBO)....INCLUDE ZXM06U36
EXIT_SAPMM06E_007   Export data to customer subscreen for header(PAI)....INCLUDE ZXM06U38 .
EXIT_SAPMM06E_008   Import data from customer subscreen for header
Pls check and revert..in addition
go to smod->MM06E005-> "documentation" -> Display to read more on documentation about data flows and exits used for it
Hope it helps
Regards
Byju

Issue in adding new tab in PO Header Level on ME21N

Hello,
As there are many thread where it has mention how to implement badi to get the required output.
Similarly, i had used the badi ME_GUI_PO_CUST and the method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE.
My Doubt :
From the below sample code, from where i have to create the subscreen, Program name.
For ME21N the program name in status is showing SAPLMEGUI.
Sample Code from other thread and my doubts are next to it..
CHECK im_application = 'PO'.
CHECK im_element = 'HEADER'.
CLEAR re_subscribers[].
ls_subscribe-name = 'SAPLZPONEWTAB'.   "This is the name of subscreen but it shows the standard one (shall i create a program and then add a subscreen and use here?)
ls_subscribe-dynpro = '9000'.
ls_subscribe-program = 'SAPLZPONEWTAB'. "Shall i use the program name SAPLMEGUI here
ls_subscribe-struct_name = 'ZPONEWTAB'.    "Why this is required, as in my case i want to show some fields from EKKO table
ls_subscribe-label = text-001.
ls_subscribe-position = 15.
ls_subscribe-height = 7.
append ls_subscribe to re_subscribers.
Please advice...

Hi,
Thanks for the reply.
I have done the things..but, i can't see the tab in the header level.
Below is my code with my comment.
Note :
I created a Function Group by name SAPLZPOHEADER.
In se80 by giving the name ZPOHEADER i created a subscreen. Also created a structure as ZPOHEADER using it displayed the fields in the screen.
Code under IF_EX_ME_GUI_PO_CUST~SUBSCRIBE :
DATA: ls_subscriber LIKE LINE OF re_subscribers.
      CLEAR: re_subscribers.
      REFRESH: re_subscribers.
IF im_application = 'PO' AND im_element = 'HEADER'.
    CLEAR re_subscribers[].
   ls_subscriber-name = subscreen1. "As per the sample code i double click and set the attributes of it as same as sample code.
   ls_subscriber-dynpro = '9000'. "This is the screen no
   ls_subscriber-program = 'SAPLZPOHEADER'.   "Name of the FM Group/Program
   ls_subscriber-struct_name = 'ZPOHEADER'.     "Structure Name
   ls_subscriber-label = text-001. "Created label as 'doc header'
   ls_subscriber-position = 11.    "Given the position as i want after 'status' in ME21N
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
Is anything remaining as in debug mode it fills the re_subscribers and go the 'Create Object' but, can see it in display.
Pls help...

Add new column in ITEM data of ME21N/ME22N/ME23N

Hi Experts,
We have a requirement to add a custom field in ITEM data of transactions ME21N, ME22N and ME23N. A new column is required that would appear as checkbox. We have already tried screen exit MM06E005 but it is adding a new tab and the new field under the ITEM DETAIL data. We have also read that BADI ME_GUI_PO_CUST would do the job but it will be under the ITEM DETAIL as well.
<<text removed>>
Thanks
Edited by: Matt on Mar 9, 2009 11:06 AM - expressions of urgency can be perceived as rudeness

Hi,
If you want to make the new field to appear as check box...Go to the screen layout from its module pool program --> right click on that field and Convert it to Check Box. This would help you.
Regards,
Swapna.

How to add a custom button on Application Toolbar for ME21N, ME22N & ME23N

Hi Experts,
I am new to this forum. I hope someone will help me.
My Requirement is as :
I want to add a new custom button on Application Toolbar for ME21N, ME22N & ME23N.
There are already standard buttons in this toolbar which is Document Overview On, Hold, Personal Settings etc.
So after the 'personal settings' button i want add a new button and want to write a code which will open one custom screen.
I am not able to find any exit for this....
Please help...
Thanks....

Hey Buddies
Try below BADI : ME_PROCESS_PO_CUST
and check with required methods.
1)PROCESS_ITEM
2)CHECK
3)POST
Regards,
Pranav

Adding a new tab on item level in me21n tcode

Hi all.
i am adding a new tab on item level in me21n tcode.
i want to make this tab to be shown on the screen when the order type is UB is stock purchase order.i dont know how to make this condition and where should i place it so that this tab can come in effect only when the stock purchase order appears.
please help.thanks

hi
chk this
Re: New tabs in the header tab-sheet of ME21N/ME22N/ME23N
hope this helps
regards
Aakash Banga

Add new column at line item level in MIR7 transaction

Hi All,
    I would like to know how to add new column at line item level for GL Account
   tab in MIR7 transaction. could you please let me know how do i add new
   column in MIR7 transaction. Please let me know is there any user exit or any
   other wat to do it.
Thanks,
rao

Hi,
The customer include CI_FMBL can only be used with FMPEP and not with other transaction like FMBB.
Technically speaking, the structure CI_FMBL must be part of many other interfaces like the one use by BAdI 'FMKU_BUDGET_EVNT'.
In order to add such customer fields in FMPEP, you have to use the BAdI 'FMBW_CUSTOMER'. For instruction, you have to look at the note 1356725 and the instruction of paragraph 30. Please read the instruction and start to do your implementation.
With the BAdI 'FMBW_CUSTOMER', you can use the PBO and PAI for handling the customer fields. There is no other place to populate these customer fields. Do you want to use customer fields in FMPEP? Please check note 1356725 for reference.
I believe this answer your inquiry.
Best Regards,
Vanessa Barth.

I cannot enter new Schedule lines in item level

hi.,
while creating sales order, i want to split the Schedule lines in item level for running MRP. i cannot enter new Schedule lines in item level. at present the system is not allowing in sales order
Regards.,
Lakshmanan.S

Hi,
Will you let us know what is the error message system is giving ?
Regards,
Amrish Purohit

In transactions ME21n, ME22n, ME23n I need to add new field to item detail

Hello,
In transactions ME21n, ME22n, ME23n I need to add a new field to the table control TC_1211, in SAPLMEGUI screen 1211 for PO line items. The new field is UNSPSC Code, a 30 char field, which will be enterable/changeable on the ME21n, ME22n screens and display only on ME23n.
BADI ME_PROCESS_PO_CUST enables you to extend the business logic of the Enjoy purchase order. Is this the correct BADI to use for the purpose of adding a new input/output field to the PO detail SAPLMEGUI screen 1211?
Does anyone have any examples of adding a new field to PO Item Detail screen using BADI ME_PROCESS_PO_CUST? I have had some experience creating Badi's, and would appreciate very much some sample code if possible.
We are on release SAP ERP Central Component 5.0
SAPKB64018     SAP Basis Component
SAPKA64018     Cross-Application Component
SAPKH50013     Logistics and Accounting
Thank you,
Victoria

Hi,
Thank you for the response. I tried this and found Badi ME_PROCESS_PO_CUST. Do you have any examples of adding a new cust field to PO Item overview screen using badi ME_PROCESS_PO_CUST? I have had little experience creating badi's, and would appreciate very much some sample code if possible.
In transactions ME21n, ME22n, ME23n I need to add a new field in PO Item overview (screen 1211 of SAPLMEGUI). The new field ZZUNSPSC, has been appended to table EKPO as a 30 char field, which will be enterable/changeable on the ME21n, ME22n screens and display only on ME23n.
Can you tell me if method FIELDSELECTION_ITEM of badi ME_PROCESS_PO_CUST the correct one to use for the purpose of adding a new input/output field to the PO item overview on SAPLMEGUI screen 1211?
Thank you for help - much appreciated,
Vicki

Adding a new tab in the header level of me51n

Hi gurus
I want to add a new tab in the header level of purchase requisation (me51n/me52n) , where i want to add some new customer fileds and i will update those in a z table.
how can i do it . please give the complete code if possible .
thnks in advance.
regards
amarendra

you can try the enhancement MM06E005, based on the Document category you can show the fields on the screen.

Material descri screen level field greyout in ME21N/ME22N/ME23N-Urgent

Hi,
I have a requirement in ME21N/ME22N/ME23N is that when i want to change a PO, the material short description field should be grey out after the material is entered in the item level.
Can anybody suggest me how to do screen level field greyout in ME21N/ME22N/ME23N.
Thanks in advance,
Esaki

Hi,
This query can be solved by modifying some configuration part. Your MM consultant in project can do this or you can also try this following meintioned path: Goto tcode SPRO
SPRO>Materials Management>Purchase Order-->Define Screen layout at document level.
In this screen layout for the mentioned transactions ME21N/ME22N/ME23N ,material short description field can be greyed out by selecting display mode for that field.
For more clarification refer documentation against this point in SPRO.
Hope this solves your problem.
Regards,
Brajvir

ME21N / ME22N / ME23N Spec2000 tab is missing

Dear All,
Once we implied the lastest support package into our system, the Spec2000 tab which was shown at the bottom of the ME21N - ME22N - ME23N pages dissapeared. I have investigated this issue for two weeks but the result is "FAIL". Quick help is needed.
Best Regards.
Eray

Thanks for the quick response, but I have already implemented this OSS Note into our system. However, problem remains as it is.
Let me explain another way. The problem is mainly about the customization problem, I think. In my opinion, I have to activate Spec2000 tab through SPRO, but I don't know the relevant activation process. Furthermore, if any enhancement package is infected because of the Support Package, this case needs to be taken into account.
Thanks in advance.
Eray

ABAP runtime error while doing ME21N, ME22N, ME23N, ME51N,ME52N, ME53N

Dear All Expert,
I am facing problem while doing ME21N, ME22N, ME23N, ME51N,ME52N, ME53N,
Please find the below ABAP Runtime Error.
Runtime Errors         LOAD_TYPE_VERSION_MISMATCH
Date and Time          10.02.2011 11:13:07
Short text
     Change of a Dictionary structure at runtime of a program.
What happened?
     Runtime error
     The current ABAP program "CL_IM_WRF_MM_PROC_PO==========CP" had to be
      terminated because one
     of the statements could not be executed at runtime.
What can you do?
     Restart the program.
     If the error persists, contact your SAP administrator.
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
Error analysis
     The ABAP runtime system detected that the Dictionary-type "WRF_POHF_KOMP_STY"
      changed
     during the flow of the transaction.
     As the type was already used in the old version
     and in the new type should be used in the same transaction in the new
      version, the transaction had to be cancelled to avoid inconsistencies.
How to correct the error
    Try to restart the program.
System environment
    SAP-Release 700
    Application server... "iqe"
    Network address...... "172.25.0.85"
    Operating system..... "Linux"
    Release.............. "2.6.9-55.ELsmp"
    Hardware type........ "x86_64"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "iqe"
    Database type..... "ORACLE"
    Database name..... "IQE"
    Database user ID.. "SAPSR3"
    Terminal................. "MUMJML5727"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Dec 26 2010 20:17:07"
    create on........ "Linux GNU SLES-9 x86_64 cc3.3.3"
    Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 285
Patch text.. " "
Database............. "ORACLE 10.1.0.., ORACLE 10.2.0.., ORACLE 11.2...*"
SAP database version. 700
Operating system..... "Linux 2.6"
Memory consumption
Roll.... 16192
EM...... 25139088
Heap.... 0
Page.... 40960
MM Used. 8038136
MM Free. 4528408
User and Transaction
Client.............. 600
User................ "JKMM"
Language key........ "E"
Transaction......... " "
Transactions ID..... "4D524AD1FD7A42F9E1000000AC190055"
Program............. "CL_IM_WRF_MM_PROC_PO==========CP"
Screen.............. " "
Screen line......... " "
Information on where terminated
    The termination occurred during generation of the ABAP/4 program
     "CL_IM_WRF_MM_PROC_PO==========CP".
    The termination occurred in line 213
    of the source code of program "CL_IM_WRF_MM_PROC_PO==========CM007" (when
     calling the editor 2130).
Source Code Extract
Line SourceCde
183   DATA: l_flag TYPE wrf_pbas_boolean.
184
185   CALL FUNCTION 'WRF_POHF_MSG_READ_PREVIEW_FLAG'
186     IMPORTING
187       e_preview_flag = l_flag.
188
189   IF NOT l_flag IS INITIAL.
190
191     DATA: l_header TYPE REF TO cl_po_header_handle_mm.
192
193     MOVE im_header ?TO l_header.
194
195     CALL METHOD l_header->if_output_mm~preview( ).
196
197     CALL FUNCTION 'WRF_POHF_MSG_RESET_PREV_FLAG'.
198
199 ***$ Widening Cast for printing information.
200 **    CALL FUNCTION 'WRF_POHF_STORE_PRINT_INFO_SET'
201 **      EXPORTING
202 **        im_header = l_header.
203
204 * Printing Preview
205 * IF NOT gv_preview IS INITIAL.
206 *    CALL METHOD l_header->if_output_mm~overview( ).
207 *    CALL METHOD l_header->if_output_mm~preview( ).
208 * clear gv_preview.
209   ENDIF.
210
211 * ENDIF.
212
>>>>> ENDMETHOD.
Internal notes
    The termination was triggered in function "ab_RxDdicStruShareFailed"
    of the SAP kernel, in line 2539 of the module
     "//bas/700_REL/src/krn/runt/abtypload.c#11".
    The internal operation just processed is " ".
    Internal mode was started at 20110210111306.
    Name of the changed type......: "WRF_POHF_KOMP_STY"
    New version of the type.......: 20070508193207
    Old version of the type.......: 20070508193207
    New user......................: "Type" "WRF_POHF_KOMP_STY"
    Version of the new user.......: 20070508193207
    Old user......................: "???" "???"
    Version of the old user.......: "???"
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
(CTrcStack2+0x78)[0x6cbb78]
(CTrcStack+0xb)[0x6cc17b]
(ab_rabax+0x3be5)[0xb8d985]
(_Z24ab_RxDdicStruShareFailedPKtm4RUDIS0_S1_S0_+0x163)[0xb16823]
(_Z19ab_GetDdicTypeIndexPKtm4RUDI+0x1f6)[0xb0dbb6]
(_Z11ab_LoadViewPtjPKtPK11PROGRAMHEADPj+0x27e)[0xb16ede]
(_Z18ab_GetDdicTypeLoad4RUDI+0x6e)[0xb1705e]
(ab_GetView+0xc1d)[0xb0ee1d]
(_Z20CompressInitRcByDatajPK6CG_DIRjjS1_jj4RUDIPKhj+0x60d)[0xe32b2d]
(_Z21cg_CompressStackFrameP4TRIGjj+0x169)[0xe33399]
(_Z8cg_blkleP3ENV+0x75f)[0xe4779f]
(_Z9sc_cblklePKt8ENV_KINDP7SC_INFO+0x394)[0xe90024]
(sc_blkle+0xdd)[0xec6e4d]
(rs_oper_abap1729+0x37)[0x10eb237]
(rs_expan_abap+0xa1996)[0xfd7a2a]
(_Z8sc_expanj+0x76d)[0xe1d55d]
(_Z5parsejPi+0x258)[0xe19998]
(sc_check+0xb9c)[0xe1857c]
(sc_inclu+0x5fa)[0xe0d50a]
(rs_oper_abap2160+0x3a)[0x1115d6a]
(rs_expan_abap+0xcd41d)[0x10034b1]
(_Z8sc_expanj+0x76d)[0xe1d55d]
(_Z5parsejPi+0x258)[0xe19998]
(sc_check+0xb9c)[0xe1857c]
(sc_checkStart+0x41)[0xe1ac51]
(cg_generate+0xb65)[0xe57755]
(ab_gabap+0x14a)[0xb01a5a]
(dy_gen_abap+0x63c)[0x74428c]
(ab_genprog+0x13d3)[0xb03d13]
(_Z17ab_LoadProgOrTrfoPKtjPj+0xb56)[0x8f9ab6]
(_Z11ab_LoadProgPKtj+0x11)[0x8f9ca1]
(_Z15LoadGlobalClassPKtjjj9ClasState+0x24c)[0x958c2c]
(_Z11FillCfixIntPK4CREFP4CFIXjj9ClasState+0x214)[0x957404]
(_Z11ab_FillCfixtj+0x65)[0x957ae5]
(_Z26ab_CrefToCladId_ActivateOKtPh+0x7d)[0x957b6d]
(_Z8ab_jaboov+0x623)[0x959793]
(_Z8ab_extriv+0x607)[0x8ba9c7]
(_Z9ab_xeventPKt+0x1c1)[0xa1c021]
(_Z8ab_triggv+0x9c)[0xa1c77c]
(ab_run+0x97)[0xbde5c7]
(N_ab_run+0x9)[0x736359]
(dynpmcal+0x669)[0x7333b9]
(dynppai0+0x8eb)[0x734d9b]
(dynprctl+0x3e9)[0x733db9]
(dynpen00+0x4a5)[0x726eb5]
(Thdynpen00+0x359)[0x541bd9]
(TskhLoop+0xc49)[0x54d999]
(ThStart+0x20f)[0x55b29f]
(DpMain+0x2da)[0x4bd49a]
(nlsui_main+0x9)[0x4910c9]
(main+0x33)[0x491103]
/lib64/tls/libc.so.6(__libc_start_main+0xdb)[0x3cde51c3fb]
Please help me to resolve the issue.
Thanks & Regards
SKK

read this part again: The ABAP runtime system detected that the Dictionary-type "WRF_POHF_KOMP_STY" changed during the flow of the transaction. As the type was already used in the old version and in the new type should be used in the same transaction in the new version, the transaction had to be cancelled to avoid inconsistencies. How to correct the error Try to restart the program
how often had you restarted ME21N before you posted this message?
In best case this message appears only once, because the program / or dictionary was changed while you executed ME21N
If many times, then contact your ABAPer, because then he probably did not transport all objects that were changed, or the objects have to be regenerated in your system.

Badi for me21n,me22n,me23n

HI experts,
CAn any one help me out infinding a badi for me21n,me22n,me23n, which triggered on every press of enter key or some other check, so that i could kept a validation for the header and item fields of the t.codes

Hi,
Go for BADI,
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
Reward points if useful....
Regards
AK

ME21N, ME22N, ME23N call ME12 instead of ME13

Hi
Our users would like to be able to go from ME21N, ME22N, ME23N and directly to ME12, so that they can make changes in the info records.
As standard the transaction codes ME21N, ME22N, ME23N calls up ME13 which is display mode of the info recrod.
I have some concerns to make this change and that is weather the changes made in ME12 will take effect in ME21N if they are creating a PO and want to make changes to the info record.
The other thing is that it might be difficult to control the changes made in the info records if it is possible to do this "on the fly" and not consider the consequenses of the change, other than to satisfy and here-and-now need for a certain issue.
If we want to proceed with this, how would I do this the best way to call up ME12 in stead of ME13.
Best regards
Birgitte Hamborg Jakobsen

Hi,
I cant understand why you want to go to ME12 directly instead of ME13 from ME2*N transactions. In case the user want to change anything, he can go to menu - info record - change from ME13 directly. I dont think its worth spending time and effort to change it to ME12.
Even though you change anything in info record from ME2*N transactions, the changes wont reflect back to your PO. The changes will be reflected in new PO only, not in already created documents.
Regards,
AKPT

New tab implementation at item level in ME21N/ME22N/ME23N.

Similar Messages

Maybe you are looking for