New TC but now Time Machine can't find network backup drives
I had a 2 GB TC replaced under warranty (many thanks to LaPastenague who suggested I may be able to get a replacement under warranty). Configured the TC using Airport Utility, and after a bit of messing around (had to delete and re-find the USB printer) everything seemed to be working fine. However ....
I have a MyBookWorld network drive as an alternate Time Machine backup disk, and my MacBook found both the TC and MBW and backed up to them alternately just fine.
However on another MacBook I removed the MBW drive as a backup disk in TM preferences, and now I can't add it back to that Macbook's list of backup drives. I get the "can't find that server" error dialogue. Which is crazy because the other shares on the MBW drive are visible - it's just the backup partition (WD_Backup) that isn't found. I figure it's trying to connect to the IP address of the previous TC, which probably changed when I replaced the TC, or something.
Help please !
TIA ... John.
Manually mount the directory in finder.
This is so much more important on Mavericks than it used to be due to its default to SMB networking.
I guess I also do not know if you should mount this via AFP or SMB but try both.
So in Finder.. Go.. connect to server.
Type in the actual name or IP of the device.
AFP://MBW.local/WD_Backup (where MBW is the network name of the device. local is the domain (assuming it is connected to the TC))
No luck try AFP://MBWIPaddress where you simply type in the IP.
You might find it is easier to pick up the directory from the other Mac where it is working.
Click on Get Info and look at the directory URL info.
If no luck use SMB://MBW.local etc.
Come back to us if it still does not show up.
Similar Messages
-
I disconnected My Passport by mistake, and now Time Machine can not recognise it. It no longer appears in the My Devices section of Finder. What do I do?
Hello rjhc49,
Thank you for the details of the issue you are experiencing with your external hard drive. I found an article with steps you can take when an external device is not being recognized.
I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Time machine can't find older backups
Hi guys,
I am experiencing issues with Time machine, which can't find older backups after clean install of OS X Yosemite 10.10 to my MacBook Pro 17 early 2011 model.
Important to say, I am using NAS Synology DS213j as my Time Machine backup disk.
When opening Time Machine window, I am getting only one restore date (actual date) even my TM folder contains backups since February 2014.
Curious thing is, that Migration Assistant utility can access the data when restoring my old profile.
Can anyone please advise what's wrong?
Thank you
BrachaciEven weirder -- the problem I described above happens only with certain windows. WIth others, I can open the earlier backups.
-
Time Machine can not find previous backup
Please help. I have done a full backup on Jan 26, but I can not find this date in the time travel window and Finder. I haven't change the user name. It just somehow has gone. I sure that the files should be somewhere inside the hard drive since it has taken away 60 GB. What can I do?
nerowolfe wrote:
Pondini wrote:
If you don't have a completed backup in several days, TM will not do an incremental backup, but a new, full, backup of everything on your system.
Not really true. If the computer is used with the TM drive turned off or disconnected, perhaps, but on my two computers that I do not use all the time, when I turn them on, the backups continue as if nothing has happened, which, of course is the case. For example, with my G that I may use once a week or even once in several weeks, when I turn it on, the next backup is perfectly normal.
I think you are correct when the total amount of data change is large enough to require a full backup, but this would only happen if the TM drive were not running whenever the computer is running, thereby creating a large gap, so to speak, between the state of the computer HD and the TM HD.
There are several threads here by folks who've suddenly had TM backups fail, for lack of space, because TM was doing a full backup (confirmed by their logs), after no backups for several days, and couldn't delete enough old backups to get space for the new one. Some had seen a warning about no backup, some didn't recall.
There's even a debate about how long it is -- some think it's 10 days (because they'd had a warning to that effect), others say they've gone longer, still others think it's a combination of time and volume of changes (I suspect that's the case). But I don't recall anybody saying they'd gone a month without TM doing a new, full, backup.
And I don't see how it would matter whether the TM drive was running or mounted; as long as TM was off or couldn't successfully do a backup, the result is the same: x days without one. -
My brand new back up drive is connected but now time machine has disappeared after working perfectly for a week. - no icon, not appearing as an option to save to - have rebooted everything a few times.
It's not clear whether you were able to do any backups to this drive at all. If not, it's probably not formatted properly. See #5 in Time Machine - Frequently Asked Questions for instructions.
If you did get any successful backups, there may be a problem with the drive, or the backups may be corrupted. Try to repair the backups, per #A5 in Time Machine - Troubleshooting. -
i've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?
Look at this support article:
http://support.apple.com/kb/ts2570
Ciao. -
Lion's Time Machine - Can't create a backup?
Time Machine can't make a backup... I even went ahead and wiped out the drive and tried to create a new backup.
All it says is that it couldn't complete the backup and to try later as it might only be temporary.
This is critical for me and a not at all light in importance. Had I known this along all the other issues with Lion existed I wouldn't have upgraded. For now I am keeping my MBP safe from Lion...
I guess I just have to suffer the damage on my 27" IMAC..
I would use a BR Disk to do a back up of my files, but NO.... MACs don't support Blu-Ray disk drives, STILL!!
Apple you need to fix this and other issues.Apple's ingenuity in their advances can be hailed by millions as I myself give them credit where credit is due, such as devices like the iPad and iPhone/iPod. But when a company only bothers to alert you to a couple of apps that Lion can't run and moves them to a folder for the user to delete or update but leaves devices and other industry standard software packages rendered useless with no warning when they have extensively tested their OS against 3rd party manufactured devices and software, whom they are partnered with, then yes they can share in the blame just as Microsoft takes the blame for operating systems that do the same such as VISTA.
I am sure that with enough time all of the 3rd party companies will undoubtedly get on board at some cost that will get pushed down to the end users. They will either update, upgrade or conform.
Apples mentality in the past hurt their stock prices, they used to only use their own Risc based processors and they refused to adapt and incorporate to the needs of their users desires for better faster chipsets and industry software such as Office. They adapted!
Refusing to incorporate the ability to use Blu-Ray technologies when companies such as Pioneer,LG, and Cyberlink are prepared to release the software for the Mac, Apple just has to give the go ahead, then yes, its their fault again. The industry in general isn't blind, they have a reason. Manufacturers want to create things that work with Apples Operating system and do, but they aren't allowed to release it without approval from Apple. They need Apple's support and acceptance for something like Blu-Ray to make it. Otherwise its just another hack and shunned by any cautious person that wants to make sure that their purchase won't cause them more problems than its worth. Blu-Ray is a matter of licensing and a major reason that Microsoft won't incorporate it into their own media player, but they leave it up to 3rd party software companies to absorb that cost and create their own players that can play back Blu-Ray movies within the Windows platform. Apple wants to keep Blu-Ray off of their machines as they can't obtain an exclusive license to the codec for Blu-Ray movies for Quicktime. The same mentality that they had before with their processors. So even the ability to read and write to the medium is out of the question. -
I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Machine, there are only about 5 backups recorded on the ext. hard drive. There were many more before. Any idea what happened and if I have to buy a new back up hard drive?
Hallo Kieth ,
I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
Thanks for your interest and advice.
regards - Alan -
Installed GoFlex 1.5 TB external drive on my iMac running OS X 10.7.4 and error says Time Machine can't create a backup folder. Any solutions?
Well, to unmount the drive, you can use the Terminal application.
Start in Applications > Utilities > Terminal.
When the Terminal window opens, type - without the quotes and with the space at the end - this:
"diskutil unmount "
Then drag the icon of the unmounted drive from the desktop into the Terminal window - the drive location will be added to the end of the command above. It should look something like this:
diskutil unmount /Volumes/volumename
Then press enter (return).
That should unmount the drive. Now you can try the Time Machine process again with perhaps a different interconnect cable for the GoFlex. -
Time Machine Can't find Drive connected to other networked Mac
I have a Drobo external drive array connected by firewire to my primary home computer - a Mac Pro.
For the last year I've backed up two Macbook Pros (mine and my wife's) to this Drobo using Time Machine (The Mac Pro is always on and the laptops backup through the home network, through the Map Pro, to the Drobo).
I recently did a fresh reinstall of Lion to all 3 computers. Now for some reason Time Machine can't kick the backup off. It gives me a "Can't backup - the backup drive us not available," or something like that.
A couple of key points:
* Through the primary computer, I have opened read/write file sharing permissions for all drives, including the FW connected Drobo
* From the laptops, I can see and read/write to the Drobo through Finder
* Through Time Machine preferences, I can select the Drobo as a backup destination - it's only when I kick off the backup that I run into the error.
* If I create a test admin account to try, I get the same problem when trying to back up.
* As a safegard, I have run a manual backup successfully to a separate external drive (mobile g-drive)
What am I missing? Seems like it's gotta be something straightforward - perhaps on the laptop?
Thank you,
-bh-no - sadly not:)
Okay - I gave it a shot - no dice - here's a screenshot -
Couple of interesting things (at least to me and my limited knowledge...):
* the reset of Time Machine seemed to reset how my laptop connected to the primary computer - defaulted to connecting through AppleID rather than Administrator
* Perhaps I'm using wrong Admin credentials in my File Sharing preferences?
* When I connect to the main Mac Pro ("connect as...") with Admin credentials...though I see the drives and can read/write, it still shows a "connection failed" message above. sending one other screenshot to show you.
Thanks for all your help,
-bh- -
Time Machine can't find external drive after installing Lion
Time Machine can't find external drive after installing Lion. I have a Laice 1 terabyte external drive that worked fine with Snow Leopard and now no show ... tried connecting it to front port and Mac Pro can't see it. Also lost Office,Quicken, and Final Cut Pro says: " You can't open application because Power PC apps are no longer supported" this is Not a good surprise!
Does the drive work when just directly connected? If so, have you prepped the drive?
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size. -
Time machine can't find wireless device despite strong Wifi connection
Every time I try to set up time machine, whenever it tries to find a wireless device it says "Airport Utility was unable to find any Airport wireless devices. Make sure the Airport wireless device you want to set up is plugged in and in range of your computer, and then rescan again." I already have a perfectly strong connection to my router so why does it keep saying that it can't find a wireless connection?
Bernard778 wrote:
I have the very same problem. MB recognizes my 2TB Verbatim when connected directly via USB and Time Machine goes to work. When I connect the HDD to my router, my MB sees the HDD in Finder, but Time Machine can't find it ("Airport Utility was unable to find any Airport wireless devices. Make sure the Airport wireless device you want to set up is plugged in and in range of your computer, and then rescan again.").
@Pondini - this is not a time capsule, I have a HDD on my WiFi network.
Hi, and welcome to the forums.
You have two problems with this setup.
First, Apple doesn't support backing-up that way. See this Apple article: [Disks that can be used with Time Machine|http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html].
Second, backups done locally (when the HD is connected to your Mac via USB) are placed in a Backups.backupdb folder at the top level of the drive. When they're done over a network (Ethernet or WIFI), that folder is inside a +sparse bundle,+ and you can't easily switch between the two. -
Time Machine can't copy my hard drive
Time Machine can't copy my hard drive, it says that it can't complete the safety copy because an error occured when files were copied to the safety copy. Does anyone recognise this problem? All I could find in System notifications about Time Machine is this: "localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)"
John Galt wrote:
... Are you unable to select the external HD as a backup device?
pres92 wrote:
that's the problem -- my hard drive ("startup disk) is not listed, so I can't select it.
The reason is that the startup volume is not a valid selection for its own Time Machine backup.
The only drive listed is the Time Machine external drive. Obviously, I don't want to back up the time machine drive.
By default, a Time Machine backup volume is excluded from being backed up.
The appearance you describe is correct, otherwise I'm completely misunderstanding your problem. -
Time Machine no longer finds the backup device
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imagine something not being covered there. -
I recently traded my basline macbook pro with retina dipslay for the mid level to gain a bigger SSD. I used my time machine backup on my Lacie Porsche Design 2TB external hard drive. It worked seamlessly and new computer is up and running perfectly. BUT now my time machine backups are painfully slow. Like 5KB per 30 minutes slow! When i ran my first initial backup it took about 45 minutes to do a full backup of about 110GB (on my baseline retina display with the exact same Lacie External drive) ... Now time machine wants to do the same thing (a full new backup because its a new computer) but it is so slow it is pretty well not doing anything at all. HELP! Is it the external drive or the computer or something i am doing wrong??
See Pondoni's tip - Backup is slow or seems "hung" - maybe it will be of some assitance.
Clinton
Maybe you are looking for
-
4s with ios8 - battery drain issue - possible clue?
I am one of the 4s users who is experiencing significantly accelerated battery drain since upgrading to ios 8.0 the first day it was released. My battery will drain from %100 to less than %50 in less than two hours with typical light use. Previousl
-
My Computer Notebook is a Dell N5010 Inspiron with an i3 processor running a Win 7 64bit OS. Firefox has always run smoothly on it. I could not exactly determine when it started failing to open after each attempt to start but I think it was when I ac
-
Inspection lot status MCAN - Lot marked for cancellation
Hi QM Team, Once we cancel lot through QA02 or if we cancel document then system cancell lot accordingly & put the lot status as "LTCA". But in my system I have seen couple of lot with status "MCAN - Lot marked for cancellation". Can you suggest me h
-
I've tried several times to get it to Backup to iCloud. But every time I do, it will start and say it is "backing up". Then after a few minutes, it tells me that the backup could not be completed because the verification timed out. Can anyone tell me
-
JDBC url for orcale repository
Hi, I want to connect an oracle repository as my data server. By giving the following url "jdbc:oracle:thin:@<server>:<port>:<service_name>" I can connect to the database of the repository. The database has more than one repository and what should I