New tcodes in ECC 6.0 for obsolete tcodes in 4.6C

We are doing security upgrade from 4.6C to ECC 6.0.
There are some tcodes have been deleted in ECC 6.0, but I don't which new tcodes will replace them.
I am looking for the new tcodes in ECC 6.0 for list of tcodes in 4.6C (below) which have been deleted in ECC 6.0:
AL02, AL08, AL10, AL18, AL21, AL22, CN90, CN92, CN94, KSRP, SAPSAP_IA,
SB02, SO80, ST08, S_P9C_18000155, S_P9C_18000155
Note: i verify the table PRGN_CORR2 in ECC 6.0, and the list provides from OSS note 991377, however both of them not include those tcodes I mention above.
Your input with the new tcodes, that replace the tcodes above, will be appreciated.
Thank you
Steve

Hi,
This thread may help you with the required information.
Re: TCode set for ECC6.0 compared to 4.7
Rgds,
Raghu Boddu

Similar Messages

New functionality in ECC 6.0 for auto clearing of bank clearing account.

Is there any new functionality in ECC 6.0 for auto clearing of bank clearing account.
Regards,
Kishore

Hi,
There no new functionality in ECC 6.0 for auto clearing of bank clearing account. Still you need to depend on Manual / Electronic bank statement to clear them.
Thanks
Prasada

New functionality in ECC 6.0 with Enhancement Package 3

Hi Experts,
Can any one tell me what new functionality is added in Enhancement package 3 (ECC 6.0)?
Thanks & Regards,
Simar

Hi,
There no new functionality in ECC 6.0 for auto clearing of bank clearing account. Still you need to depend on Manual / Electronic bank statement to clear them.
Thanks
Prasada

New Tcodes for SD & FI modules in ECC 6.0

Hi Gems,
Are there any new tcode available for SD & FI modules in version ECC 6.0.
Can some please specify them? And also tell me what are the obsolete Tcodes/tables in ECC 6.0.
Thanks
Dany

Hi Gems,
Are there any new tcode available for SD & FI modules in version ECC 6.0.
Can some please specify them? And also tell me what are the obsolete Tcodes/tables in ECC 6.0.
Thanks
Dany

NEW Tcode for Subcontracting

Hello
Has anybody heard of the transaction code ME2ON(new Subcontracting functionality regarding the movement types for components) which is a new tcode for Subcontracting process where the movement types being used are 30A . Could any body tell me how the transaction works . This is as per the new version ECC 6.0 EP4 .
Thanks

Hi
In my knowledge there is no t.code like ME2ON. There is a new t.code Adsubcon for subcontract with special stock.
But you have to activate few (check in OSS) business sets in SFw5 for that. The below link will help you
http://help.sap.com/saphelp_di471/helpdata/EN/ed/ac8ec81bbc4bd5bc182a749f479765/frameset.htm
Regards
Antony

Reg creation of new Tcode for d existing Tcode

Hi ,
i need to create new Tcode for d existing Tcode. For Ex. for abap editor Tcode is SE38.for dis i want to create a new Tcode like Z_se38.how can i do it.Plz explain me clearly.very urgent
Thanks in Advance

hi,
how to create a a T-code of that
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm38 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Rgds
Anversha

New Tcodes in ECC 6.0

Plz provide if sum new TCodes are there in ECC 6.0
Thanks in advance
Regards

Go in Tcode SE11
Select "View" and enter "TSTC" then press display tab.
Then go in Utilities->Table contents->Display.
In Max no. of hits enter as 9999.
Then you will get all transactions in SAP.
Rewards if helpful.

Replacement for Obsolete Payroll schemas 'KARMC' and 'XEDT' in ECC 6.0

Hi Experts,
I am working in a upgradation project. In HR Module (Payroll schema). Any one can help me out what are the replacement for obsolete payroll schemas 'KARMC' and 'XEDT' in ECC 6.0. (These two are there in 4.6C but, not in ECC 6.0)
Thanks in Advance,
Ramesh.

Hi Experts,
I am working in a upgradation project. In HR Module (Payroll schema). Any one can help me out what are the replacement for obsolete payroll schemas 'KARMC' and 'XEDT' in ECC 6.0. (These two are there in 4.6C but, not in ECC 6.0)
Thanks in Advance,
Ramesh.

New TCode for retention from purchase order

Hi
I am in SAP Ecc6.0 with EHP3. There is a new TCode in SAP for downpayment - ME2DP. For using this tCode, we have to give downpayment category in payment processing tab in purchase order.
Then we excute ME2DP. Similarly there is a Retention field in payment processing tab in purchase order. But i want to know the tCode where i can execute retention (as there is ME2DP for downpayment)
Edited by: Deepak Agrawal on May 12, 2010 3:18 PM

Meera,
Which version of SBO are you using 2005 or 2007?
I don't think Serial numbers can help in this scenario. There is no hard allocation or blocking possible using Serial numbers.
This is the Work around I am thinking about.
Set the items to be Batch Managed - On Every Transaction
When performing Goods Receipt, enter the Sales Order Number as the Batch Number
When creating the delivery, using SBO_SP_TransactionNotification we can easily check the Batch of the Item being selected and verify it with the BaseRef of Delivery lines to match with Sales Order number.
If the numbers don't match we can warn user with message, "The items batch reserved for Sales Order xyz"
Even if you make a mistake when entering the batch number same as Sales Order number when doing a goods receipt. It can still be traced and blocked during delivery.
Hint: The Batch table records the Goods Receipt transaction along with the BaseDocument number, Base Ref, etc
If you decide to go this route, I could help you further.
Let me know
Suda

Set a productive ECC as source for two BI's?

Hi,
I don't know if this is an obvious question (sorry if it is)... but I've looking for related info and found nothing.
I have my productive ECC system working as source system for the productive BI. Now I'd need to connect this ECC as source for my development BI system also. When setting the connection I get errors RSAR 371, RSAR 373, RSAR 374, RSAR 8 and E0 414. I found some threads about these errors but related to system changes. I don't want to change source systems but add a new one.
Is it possible to have an ECC as source for several BI systems?
Regards,
J.

Hi
Yes you can set up 2 BI system after ECC6 system.
Check that the set up of the logical source system in ECC is done correctly with specific idoc segments, specific ports of communication, etc.
You may haveto ask a basis expert for that
The only issue you might face is linked to the delta sources not target system dependant.In thatcases you might loose the delta data into one of your BI system
PY

The new table and Columns to look for in picking headers, etc

Hi,
What are the new tables and columns to look for mapping the following old ones:
1) Pick_Slip_Number from So_Picking_Headers,
2) Sequence_Number from SO_Picking_lines
3) Line_ID from So_Note_References
Thanks and Regards,
Praveen

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ravi alladi ([email protected]):
Actually would it be possible to get a list of all changes in Order Management between 11 and 11i? ie what tables added, what have been modified and which ones are obsolete<HR></BLOCKQUOTE>
Ravi
Actually, we are working on that same analysis. If you receive any responses, please forward to myself as well.
Thank you
Sha Green

What's new in SAP ECC version(Technically)

Hi ALL,
iam and ABAPer new to SAP ECC version.
can u post me th document related to SAP ECC version (what are the technical changes in ECC& Syntax change in ECC)
thank u

Hi,
Welcome to SDN!
In SE38, click the blue icon (Information) with the "I" in it.
Click "New Features in ABAP".
There should be a subfolder there which says "ABAP Changes by Release".
There is also a very good document from Thomas Jung here in the SDN
that contain a lot of hardcopies of the changes.
/people/thomas.jung3/blog/2005/05/15/abap-46c-to-640-delta-training
Also, check the following threads:
Re: ABAP Changes for release ECC 5.0
Re: Technical difference between 4.7 and ECC 5.0
best regards,
Thangesh

New Tcode creation in Production

Hi
I have created query in tcode: sq01 in PRD server. Now i want to create new tcode say : zpp and i want to assign the program.
Whiel doing this in tcode: se93 , i have selected start object : program and selection screen, then system throwing error : changes to rpository objects are not permitted in the clinet.
To solve wat i have to do.
pl guide me. Is there any other tcode to create new tcode and assing the program.
warm regards
ssp

Production server should not be used for development.
Do the necessary developmet in Development server under a transport.(Create a transport through transaction SE10.) Release the transport and the task.Then move it to quality, then to production.

How can I get a new copy of the Voicemail app for my LG Spectrum?

How can I get a new copy of the Voicemail app for my LG Spectrum? It no longer works....the screen say Loading please wait....the
!Visual Voice Mail - A Visual Voice Mail error has occurred. Please try again. OK I've tryed several times with the same message. I've
deleted the app from my screen and replaced it from the Apps Library....still the same message.
I cannot find an answer on MyVerizon. Any ideas?
Thank you,
Dee

OK, at least 3 is working.
I don't know how you have a Tape Recorder icon on your Home Screen. I cannot add one myself. But, I am running Holo Launcher in replacement of the default LG "Optimus" User Interface. It's much better in my opinion.
Try long pressing the icon and select Edit and maybe you can change some attribute of the icon.
Another thing you could do, is long-press an empty area of your desktop, to add an icon. Select Shortcut, then Select Contact, and scroll through your contact list and choose the contact that you added for *86.
You realize if you have voice mail you haven't heard, there is a tape recorder icon in the notification bar, which you touch and pull down, then press it to dial voicemail.
If that functionality doesn't work, you MIGHT want to consider doing a factory data reset on your device, but that is going to nuke all your personalizations and cause you work to set up again.

TS3772 Hi Team, I fairly new at this & I'm trying for the first time to download a movie, however its not allowing me to play as it says I need to download quicktime which I have tried to do, I have this application now but its still not allowing me to vi

Hi Team, I am fairly new at this & I'm trying for the first time to download a movie, however its not allowing me to play as it says I need to download quicktime which I have tried to do, I have this application now but its still not allowing me to play movie, any help please for someone who hasnt got a clue

where did you download the movie from?
what is it doing when it wont allow you to play the movie?
since you downloaded quicktime is it still asking you to download quicktime?

New tcodes in ECC 6.0 for obsolete tcodes in 4.6C

Similar Messages

Maybe you are looking for