New TimeCapusle Update fixes Xbox360 issue

I updated my Time Capsule Airport software a few days ago when the update came out. Today I turned on the Xbox and it signs me in to Xbox Live. The xbox is not hard wired into the Time Capsule, I set up the wireless network months ago but never could get it working so it seems the new update has fixed what ever issue there was.

tx for the post.

Similar Messages

  • Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

    Will the new 10.6.8 update fix SATA3 issues related with 2011 MacBook Pros?

    It is against TOU to speculate on these message board.  Suggest you post your question on the Mac Rumors site.
    As I already stated, there is no 10.6.8 update.  If there was, it would be listed in Software Update.

  • 4 days ago NBC announced that hackers can intercept email and other communications that are meant to be encrypted. What update fixes this issue?

    4 days ago NBC announced that hackers can intercept email and other communications that are meant to be encrypted. What update fixes this issue?

    First, I would avoid listening to NBC as a source for tech news. They've proven that they are not a responsible source for that kind of thing. See:
    NBC severely overhypes Sochi hacking story
    Second, the SSL issue is solved by upgrading to iOS 7.0.6, as Allan points out. Plug in your phone, open the Settings app and go to General, then Software Update. Download and install the update from there. You can also download it on your computer, in iTunes, and install through sync, but that download will be larger, since it's not specific to your device.
    Finally, note that you still cannot trust e-mail... anything you put in an e-mail might as well be put on a postcard. SSL encryption only protects the transmission of username and password, when it comes to e-mail... the contents of the messages sent and received are not encrypted, and can be read (or even modified) by anyone between you and the sender/recipient. The only way to protect your e-mail is through some kind of signing and encryption, such as S/MIME.

  • HT6114 Does the 10.9.2 update fix the issue on 2011 macs where projectors with HDMI are not recognized via thunderbolt adapter?

    Hi Mac,
    Does the 10.9.2 update fix the issue on 2011 macs where projectors with HDMI are not recognized via thunderbolt adapter?
    Thanks in advance,
    Ricardo Arguelles

    Sordidloam wrote:
    So to be clear, this issue occurs on any input with the Denon Receiver.  Occurs from both HDMI out and MiniDisplay Port out.  Goes away when we reinstall the OS and update it to 10.9.2.  Comes back as soon as we update to 10.9.3.
    Cheers
    MLE
    Have you been able to use the Mac Mini directly attached to the plasma/LCD/projector with out going through the Denon AVR? Even with 10.9.3 installed?
    I have a Pioneer AVR and I have the Mac attached via a HDMI to HDMI and all is working for me. Can your Denon do some upscaling? Some AVR, like my VSX-53 can change the scaling of the input video. Meaning if I still had my Apple TV 2 which outputs 720P only, can be upscaled in my AVR to 1080i or 1080P or even 24fps. Heck, I could even plug in an old style Red, White, Yellow cable and upscale it to 1080P and output it HDMI.
    I am wondering if your Denon is able to do that and it might be set wrong. Check the owners manual for such settings. Even the plasma/LCD/project could be doing the upscaling too. So check that too.
    KOT

  • Will ICS update fix overheating issues on Xperia Mini?

    Like seemingly thousands of other people my Mini was turned in to a brick because of overheating causeing the back and menu buttons to constantly trigger. (This problem: http://talk.sonymobile.com/thread/23778?start=960&tstart=0). In a different country to place of purchase so warranty doesn't work and its been sitting in the drawer doing nothing for a few months.
    Question is, will the same problem persist after the ICS update? Will all those people like myself who were sold a dud be able to take them out of the drawer? I literally have to open the freezer and rub the phone over a bag of peas for it to work. (Nice engineering there Sony)
    There is apparently a fix that involves rooting the phone and running a script to reduce touch screen sensitivity.. but I have neither the time nor technical proficiency to be sure that I wouldn't mess it up. Why Sony hasn't implemented a touchscreen sensitivity slider in the phone options.. I don't know...
    Anyway.. given that it is a whole new operating system, will the issue still be there? Or should us Mini owners just forget it and throw the thing in the bin?

    I had also the same problem. After a couple of months I gave up and bring the phone to the service center. They have fixed it in half hour by doing calibration. I have made a backup of all applications since the procedure erase everything on phone (not sd card). Make sure you sync contact with google or export them to sd card. Now its working fine.  They said that the program update will not fix this.
    As I can see and I read from service paperm they had change the whole screen with front cover , microphone and a usb cap. Who knows why.

  • NEW BIOS UPDATE - Fixed buzzing sound from GPU?

    It says it fixed the buzzing sound near speaker and battery when on battery power. Could this be the issue that people with the Intel Proccesor have when on battery power it makes a noise?

    Hello,
    I don´t exactly know, if the bios update disable C4 states, to prevent buzzing.
    But if so, you´ll probably loose battery life, cause the cpu would´t get into lower power states.
    May be the fan (link in german) will be running more often, to keep the Nvidia chip cooler, also.
    I think if your TP suffers from whine, then give it a try or wait, till someone could tell us here
    about his experience.
    Message Edited by Agotthelf on 29-10-2008 09:59 PM
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • New Computer - Updated iPod - Syncing Issues

    Greetings!
    I bought a new computer in January. At that time, I transferred my songs over to my new computer from my old computer using a cross over cable. At that point, both of my iTunes libraries were the same.
    Since then I downloaded more songs and updated songs in the library, so I decided to finally sync my iPod classic to the new computer. I knew that I would have to restore the iPod, but since the libraries were the same, there should be no problem, right? Wrong!
    Before erasing the iPod and syncing the songs, I stupidly decided to upgrade the software for the iPod (which I haven't done since I got it, due to reading related problems on here). So that goes fine and erase the iPod. Now on to syncing the library.
    All the songs sync perfectly. The problem is with my video files. I had these movies on my iPod before I updated and erased the iPod. But now, iTunes says that the files are incompatible! I do not understand since they worked perfectly fine before! What happened?
    According to iTunes they are MPEG-4 video files. The movies were made specifically for an iPod, so I do not understand what is going on. I figure that it might be due to the upgrading I did, but when I restore the iPod it always comes back with the same version (since there was no previous version on the new computer).
    Is there a way I can fix the MPEG-4 problem or download and install the previous versions of the iPod software since iTunes does not give me an option? Should I try going back to previous version on my older computer (will this even work)? Mainly I would like to know why the MPEG-4 file that worked perfectly before is giving me problems and if it can be fixed.
    Thank you!
    (a frustrated) Lindsay

    2/Downloaded 3rd party software to sync and install library from ipod touch into itunes on new computer.
    You should have just copied \Music\iTunes\ folder from the old computer to the new computer.
    but I can't get all of my applications and some bought items to appear on ipod
    Connect thr iPod touch and select it in iTunes.
    Click the Applications tab across the top.
    Tick the apps you want to install onto the touch.

  • Why didnt 5.0.1 update fix battery issue

    what was it that apple put into this update.? my battery seems to drain just as fast if not a bit faster. i charged last night and went to bed at 11:30P. i unplugged it and left on. in the morning got up at 6:30A and battery was at 80%. i know leaving on will drain. but 20% just sitting there???? i dont mean to hate on apple but what the f*ck man.! what was the "fix" anyone know the difference from 5.0 to 5.0.1????

    I feel better knowing I wasn't going crazy this morning. After spending the last 15 hours tweaking iTunes Match, I was afraid the service was draining my battery, but then I just let it sit idle on my desk at work and periodicaly checked it, every 30 minutes I lost 5% when it was in standby. When I was checking mail in 5 minutes, the battery drained 1% each minute. After a full night charge last night the day of standby has brought me down to 43%. I normally charge my 4s every other night, and I listen to Pandora and TuneIn Radio regularly. I have a feeling it hasn't affected everyone, just like I had no issue before, but clearly have a massive issue now.
    SERIOUSLY, APPLE. Make an announcement acknowledging this garbage. If my device doesn't get its normal battery life back, the poor folks at my local Apple Store are going to have my family and I raging the place.

  • New ProApps update = Serious Crashing Issues

    Final Cut 6.0.2 Was working just fine this morning. THEN I downloaded the new update. Now FC 6.0.3 won't stay open for more than a minute without crashing. Any quick fixes or suggestions?
    Thanks-
    Chris

    It helps a lot. Knowing that you don't have third party hardware (such as a Kona or Decklink capture card) helps narrow things down. Sorry, I was blind to your machine config...and most times people don't update that (I'm guilty of that).
    Any extra plugins?
    Shane

  • New Bridge Update fixes Crashes

    For CS6 users that have TEMP allocated to a non 'C' location.
    Yea!

    my words were auto corrected in BBM, did not try it in email yet.
    have to get me some play time this weekend
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • New iWork Update Fixes Bugs!

    Just finished installing and it works perfectly!

    Pretty much the same as Keynote - the fine folks at Cupertino 'upgraded' FCP into a non-intuitive disaster. Two of my video guys are still gamely avoiding FCP X (or iMovie ***** as they delicately refer to it) in favour of the older, actually functional app.
    Sometimes Apple just gets it wrong - and I suppose if I was making >80% of my money from iOS devices, they would be topmost in my mind too. But after 4 years, to reduce Keynote to such an unworkable level in order to ensure compatability across OS iOS and Cloud is just stupid. A 5-minute conversation with any pro user would have informed Apple that what they were proposing was just plain wrong.
    I'm delighted to see them restore some of the functionality, workflow and features; but we have a long long way to go. Four years later, I expect a lot more from Apple. This is the first time they have ever let me down. I await the next patch with hope ...

  • MS Office 2008 Update: fixes some print issues?

    I noticed the first update for Office 2008 is out, and one "fix" they list for Word is:
    Blank pages are no longer printed when you print to a high resolution printer. This update fixes an issue in Mac OS X 10.5 Leopard that causes blank pages to print when you print to a high resolution printer.
    I know people have struggled with Samsung and other printers and Word since Leopard released. I do not have one of the affected printers so cannot test it.
    The updater is here:
    http://www.microsoft.com/mac/downloads.mspx
    Offered for your consideration.
    Allan

    http://answers.microsoft.com/en-us/mac/forum/macoffice2008?tab=Threads
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.2), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • Fix for issue where update KB2760758 broke multiline text properties field in custom content type

    In September Microsoft Office update KB2760758 caused an issue with the multi-line field used in custom content type used in SharePoint 2010 document libraries.  KB2826026 apparently caused the same issue. 
    Users were not be able to save documents on the SP server (in a document library) as MS Word would prompt them with a "Required properties" error message stating: ".. correct the invalid or missing required properties".
    Several sources indicated that this was supposed to be fixed in the December Office updates, but I don't see an update that affects MSO.dll where the problem originates.  Does anyone know which update fixes the issue?

    I updated you on my blog post, but just to provide an update here for those searching, this issue is not fixed in the update to the MSO.DLL available in the Dec 2013 CU, and the product group currently has no ETA on a fix.
    Of course, PSS should update me as soon as they do hear of an ETA from the PG.
    Trevor Seward, MCC
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How long is the new imac update supposed to take?

    I am currently installing the new iMac graphics firmware update, and its taken 35 minutes so far, is this normal? This seems to be a bit long to me, I've been staring at the blue screen with the moving circle and no change. Did anyone else's update take forever?

    I see this on that link:
    Do not shut off the power on your iMac during this update. Loss of power could result in your iMac failing to start up.
    Do you have high speed internet access? If not, it probably shouldn't take 35 minutes.
    From that page also:  This firmware update fixes an issue that in rare cases may cause an iMac to hang during startup or waking from sleep.
    So you were having problems with your iMac before you tried installing the update?

  • Microsoft Office for Mac 2011 14.4.2 Update fix for fusion drives

    Improves activation in Office for Mac 2011
    This update fixes an issue in which product activation is always required after you restart a computer that uses an Apple Fusion Drive. After you install this update, product activation may be requested one more time.
    http://support.microsoft.com/kb/2970766

    I don't normally advocate users re-install Office to fix an issue but in your case I think it's worth a try. The Mavericks update seems to have fixed the issue for most users. I would suggest the complete removal rather than the simple removal of dragging the Office folder in Applications to the trash.
    Office for Mac 2011: Remove Office
    http://www.officeformachelp.com/2012/12/office-for-mac-2011-remove-office/

Maybe you are looking for

  • In BCS HTML mail images are broken

    HI experts, I'm using the BCS calls to send out nice looking HTML which also includes one logo. Internally, in our LAN, the mails are looking quite nice and the image/logo is displayed correctly (MS Outlook) When external users using Lotus Notes try

  • New firmware of 5320 xm

    V05.16 for which? My product code 0571013. And latest ver is 04.13. Over the air i downloaded v05.16 but it show that it is not supported.

  • CS5.5 design view problem

    For some reason all but two elements have disappeared in the design view, leaving just the background. In truth I work using the code though there are times it helps having it. I've closed and re-opened the programme but nothing changes. Many thanks

  • Rework in Subcontracting.

    Hi All, We have Subcontracting PO and GR and IR has been done. Now Some partial FG qty needs to be sent back to the subcontractor for rework process. Please tell me how can i handle/complete the rework process. Thanks John

  • Want to create dynamic SQL with table join

    I want to create a dynamic SQL query so that the user can enter any two table names on the selection screen and two field names that he wants to join. After which i should be able to dynamically generate the SQL (native or open) and show the result a