New timing features and smoothcam

I manipulated the speed of a clip with the new retiming tools in FCP. Some of the footage is a little shaky but I can't add the smoothcam filter to the clip. The clip highlights if I drop the filter on top of it but nothing happens beyond that. Any ideas?

Hi, Mcastanheira, and welcome to the Community,
Whilst Skype may not be providing for such a facility, I trust you are researching third-party developer software add-on's which might.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Similar Messages

Cisco Identity Services Engine (ISE) Version 1.2: What's New in Features and Troubleshooting Options

With Ali Mohammed
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about what’s new in Cisco Identity Services Engine (ISE) Version 1.2 and to understand the new features and enhanced troubleshooting options with Cisco expert Ali Mohammed.
Cisco ISE can be deployed as an appliance or virtual machine to enforce security policy on all devices that attempt to gain access to network infrastructure. ISE 1.2 provides feature enrichment in terms of mobile device management, BYOD enhancements, and so on. It also performs noise suppression in log collection so customers have greater ability to store and analyze logs for a longer period.
Ali Mohammed is an escalation engineer with the Security Access and Mobility Product Group (SAMPG), providing support to all Cisco NAC and Cisco ISE installed base. Ali works on complicated recreations of customer issues and helps customers in resolving configuration, deployment, setup, and integration issues involving Cisco NAC and Cisco ISE products. Ali works on enhancing tools available in ISE/NAC that are required to help troubleshoot the product setup in customer environments. Ali has six and a half years of experience at Cisco and is CCIE certified in security (number 24130).
Remember to use the rating system to let Ali know if you have received an adequate response.
Because of the volume expected during this event, Ali might not be able to answer each question. Remember that you can continue the conversation on the Security community, sub-community shortly after the event. This event lasts through September 6, 2013. Visit this forum often to view responses to your questions and the questions of other community members.

Hi Ali,
We currently have a two-node deployment running 1.1.3.124, as depicted in diagram:
http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide_chapter_010.html#ID89
Question 1:
After step 1 is done, node B becomes the new primary node.
What's the license impact at that stage, when the license is mainly tied to node A, the previous primary PAN?
Step 3 says to obtain a new license that's tied to both node A & node B, as if it's implying an issue would arise, if we leave node B as the primary PAN, instead of reverting back to node A.
=========
Question 2:
When step 1 is completed, node B runs 1.2, while node A runs 1.1.3.124.
Do both nodes still function as PSN nodes, and can service end users at that point? (before we proceed to step 2)
Both nodes are behind our ACE load balancer, and I'm trying to confirm the behavior during the upgrade, to determine when to take each node out of the load balancing serverfarm, to keep the service up and avoid an outage.
===========
Question 3:
According to the upgrade guide, we're supposed to perform a config backup from PAN & MnT nodes.
Is the config backup used only when we need to rollback from 1.2 to 1.1.3, or can it be used to restore config on 1.2?
It also says to record customizations & alert settings because after the upgrade to 1.2, these settings would change, and we would need to re-configure them.
Is this correct? That's a lot of screen shots we'll need to take; is there any way to avoid this?
It says: "
Disable services such as Guest, Profiler, Device Onboarding, and so on before upgrade and enable them after upgrade. Otherwise, you must add the guest users who are lost, and devices must be profiled and onboarded again."
Exactly how do you disable services? Disable all the authorization policies?
http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide_chapter_01.html#reference_4EFE5E15B9854A648C9EF18D492B9105
==================
Question 4:
The 1.1 user guide says the maximum number of nodes in a node group was 4.
The 1.2 guide now says the maximum is 10.
Is there a hard limit on how many nodes can be in a node group?
We currently don't use node group, due to the lack of multicast support on the ACE-20.
Is it a big deal not to have one?
http://www.cisco.com/en/US/customer/docs/security/ise/1.2/user_guide/ise_dis_deploy.html#wp1230118
thanks,
Kevin

Q: new language features and JVM 1.4

I just finished reading Joshua Bloch's article on new Java language feature and am looking forward to their introduction.
Will programs compiled using the new features (generics, enhanced for, autoboxing, enums, static imports, and metadata) still run under a JVM 1.4?
I understand that a program that uses new gizmos from Swing, etc. will NOT run, but how about these language features?
Thanks, Ralph

Objects you would like to use in the new for loop syntax must be >instances of the Iterable interface which will be added to the >java.lang package. The Collection interface will extend Iterable. This >will allow arbitrary type to be used in the new for loop without
having to extends Collection. ah ok, why is this needed over doing plain syntactical transformations at compile-time e.g.
for( o : myarray ){
code
goes to
for(int i=0; i<myarray.length; i++){
Object o = myarray<i>;
code
or
for( o : myCollection ){
code
goes to
for(Iterator i = myCollection.iterator(); i.hasNext(); ){
Object o = i.next();
code
(I don't see why typing the element holder couldn't be automated too?)
asjf

New voice features and voice changing options for ...

Hello everyone!
I am currently involved in a class project in which I am trying to understand whether companies like Skype would be interested in technology that can modify voice/call characteristics such as pitch and tone (for entertainment or audio improvement) or even add the possibility to use cartoon voices and so on. What do you guys think about this?
All the feedback is welcome!!
Thank you!

Hi, Mcastanheira, and welcome to the Community,
Whilst Skype may not be providing for such a facility, I trust you are researching third-party developer software add-on's which might.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

New (missing) Features and iChat/PhotoBooth effects

According to http://www.apple.com/macosx/refinements/enhancements-refinements.html
AirPort menu signal strength.
The AirPort item in the menu bar now includes signal strength for all available wireless networks, so you can see which access point has the best signal before selecting it.
I'm not seeing this. Anyone else seeing this? Anyone know the fix?
Also, I have More iChat Effects 1.2 installed. See http://www.apple.com/downloads/macosx/email_chat/moreichateffects.html
Photo Booth crashes when attempting to view these effects in the effects browser. Anybody else seeing this or know a fix?

jephwhy wrote:
Also, I have More iChat Effects 1.2 installed. See http://www.apple.com/downloads/macosx/email_chat/moreichateffects.html
Photo Booth crashes when attempting to view these effects in the effects browser. Anybody else seeing this or know a fix?
I had a similar problem when I upgraded from Tiger to Snow Leopard (and also upgraded to iLife 09). For me, the solution was to run iChat and Photo Booth in 32-bit mode instead of 64-bit mode.
To do this, go to the Applications folder, select the icon for iChat, go to the menu bar and select File->Get Info. (Alternatively use the shortcut ][-I or "right click" the icon). Check the box for "Open in 32 bit mode". Repeat for Photo Booth.
(note- I have also posted the above text to another thread in the iSight forum to improve the chances of it being found by others seeking a solution)

Apple announces new FCPX features and FCP 7 additional licenses

From macrumors.com:
Apple held a private Final Cut Pro X (FCP X) briefing for enterprise contracts in London on July 6th. One first hand report has been posted to the internet detailing what Apple discussed during the event. Alex4d summarizes tweets by @aPostEngineer which reveals the following points:
1. FCP XML in/out is coming via 3rd party soon…no FCP 6/7 support project support coming ever it seems…
2. Ability to buy FCP7 licenses for enterprise deployments coming in the next few weeks…
3. FCPX EDL import/export coming soon…
4. FCPX AJA plugins coming soon for tape capture and layback…capture straight into FCPX [events].
5. XSAN support for FCPX coming in the next few weeks…
6. FCPX Broadcast video output via #Blackmagic & @AJAVideo coming soon…
7. Additional codec support for FCPX via 3rd Parties coming soon…
8. Customizable sequence TC in FCPX for master exports coming soon…
9. Some FCPX updates will be free some will cost…
Notably, the event reveals that Apple is working on allowing existing Final Cut Pro 7 enterprise deployments to purchase additional licenses. One of major complaints about the FCP X launch had been Apple's discontinuing sales of Final Cut Pro 7 even before video professionals had been able to become comfortable with FCP X.

You are posting in the wrong forum, you need to post in the FCS forum here:
https://discussions.apple.com/community/professional_applications/final_cut_stud io
but in the meantime I have FCP-7 running successfully on Mavericks.
Use Disk Utility to repair your disk permissions, then go to Digital Rebellion at
http://www.digitalrebellion.com/prefman/
and download Preference Manager (free) and use it to trash your FCP preferences.
Then try launching FCP.
MtD

New Tracker Feature and "Available Time Range"

From the 6.0.0 release notes:
Earliest 15% of Tracking Data Is Not Currently Available for Querying
The earliest 15% of tracking data is not currently available for querying. However, the appliance retains the data, and the data will be available for querying after this issue has been resolved. [Defect ID: 39471]
IronPort will address this issue in a future release.

We are just fellow users here, but you can provide feedback to Apple here http://www.apple.com/feedback/iphone.html

New airplay feature and optical audio on Apple TV

I have a 3rd gen Apple tv and just updated to the software to the latest 5.1 version. Does anyone know if I can now stream to my airport express and send audio down an optical audio cable to my stereo simultaneously?

Many thanks for your test on this. Do you know if the aTV will then play down the optical audio and HDMI simultaneously. I pressume it will so you can attach surround sound systems?

Can I use iWork '09 on Lion without using new Lion features?

I do not wish to use the new features in Lion, primarily autosave, with iWork, at least initially. In other words have iWork act as it would in S.L. However, I need to purchase iWork in order to continue using a bunch of Appleworks spreadsheets. I am using a new MBP with OS 10.7.1. My plan is to purchase the hard copy iWork '09 from the Apple Store (the AppStore download versions have already been updated). This CD should be some version of 9.0 as they have not put 9.1 on the CD. My idea is to just not let the modules (Numbers, Pages, etc.) get updated until I am ready. My question is -- will Numbers and Pages work properly on Lion without using the final update to the new Lion Features, and which updates to Numbers and Pages should I avoid?
Any help is appreciated.

Sjazbec wrote:
Resume can be disabled systemwide in Systemsettings, general section.
Alas, it's reactivated when we shutdown if we don't take care to uncheck the dedicated box.
More, if we ask to restart on an other device, we have no checkbox available to disable Resume.
Happily, it seems that pressing option during the shutdown process disable the beast.
Yvan KOENIG (VALLAURIS, France) vendredi 16 septembre 2011 18:49:31
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

I am using Firefox 3.6 on my PC , and now, when I select File New Tab (Ctrl+T), no new Tab shows up. Nor does it show up when I click the new Tab symbol next to my other tabs. How can I get the New Tab feature to work again?

In the past 48 hrs, all of a sudden, the New Tab feature on my PC< using Firefox 3.56, simply stopped working. I did not change settings, or download a new version of Firefox. it just stopped working. There are other scenarios where it does still work (for example, if I want to open a link on a web page, I can right click and open the link in a new tab), but if I simply want to have multiple websites open at once on my PC, I am forced to have multiple versions of Firefox open, as my New Tab option seems to be disabled or something. Can you help?

Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

HT1918 I'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the probl

i'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the problem?

Try to change the credit information from your iphone or other ios device. Tap on settings > store > tap Apple ID > tap view account > tap payment information > change

New Excel Features - Use of Integration,Formatting and Formulae in BI 7

Hi Experts,
I had a look at the Excel integration section of the BI 7 Features and found the some new enhancements for Excel.We are planning to upgrade to BI7 and want to get some expert opinions
1. Excel Formulas allow access to any cell of the result set.
2. combining Excel formulas and Excel Formatiing allows the design of high end formated solution workbooks.
Can anyone explain me the difference between the Excel features in BW3.5 and BI7,with some real time examples.
Does it mean that we dont need any macros to execute some of the calculations or if there a different use in BI7?
Can i use all the features in MS Excel 2003?
Can I use the Existing Bex Browser and create new BI7 workbooks or do i need for Enterprise portal?
Thanks
Mike

Hi Experts,
I had a look at the Excel integration section of the BI 7 Features and found the some new enhancements for Excel.We are planning to upgrade to BI7 and want to get some expert opinions
1. Excel Formulas allow access to any cell of the result set.
2. combining Excel formulas and Excel Formatiing allows the design of high end formated solution workbooks.
Can anyone explain me the difference between the Excel features in BW3.5 and BI7,with some real time examples.
Does it mean that we dont need any macros to execute some of the calculations or if there a different use in BI7?
Can i use all the features in MS Excel 2003?
Can I use the Existing Bex Browser and create new BI7 workbooks or do i need for Enterprise portal?
Thanks
Mike

I upgraded to the ios 5 today, but it dosent seem to have given me any new features and i didnt/wasnt asked to perform a setup? any help?

so i upgraded my iphone to the new ios 5, and for some reason i dont have any new features, no imessages or anything. it didnt ask me to set anything up, is there a way i can fix this?

iOS5 has not been officially released yet so it's anyone's guess what you actually installed...
Have you checked the OS version number on the phone itself?

New timing features and smoothcam

Similar Messages

Maybe you are looking for