New to Adobe Photoship Elements 11

Have just installed Adobe Photoship Elements 11.  Finding online assistance very frustrating.  Is there a printed manual available - or a 'dummies for Adobe' available?  If so is the printed manual explicit in its instructions?  Many thanks

I highly recommend this:
http://www.amazon.com/Muvipix-com-Guide-Photoshop-Elements-Premiere/dp/1480209392
See here for free tutorials:
http://muvipix.com/products.php?subcat_id=44

Similar Messages

  • Adobe Premiere Elements 10 running sub-par or not?

    I am new to Adobe Premiere Elements 10 and I have a lot of questions after using it for the past 4 days and getting aquainted.  First off here are my system specifications:
    HP Model h8-1214, 10GB PC3 10600 DDR3 SDRAM, 1.5TB hard drive, AMD FX 6100 6 -Core processor, AMD radeon 7450 HD graphics, Windows 7 64 bit.
         This is supposed to be a top of the line computer and I was told it could handle video editing without any issues or hold ups after all best buy does not even carry higher end models then this one.  I am currently working on two projects the first is a re-edit of 1 hours worth of Mini DV footage already edited in windows movie maker.  The other is a 3 minute compilation of videos off my ipod nano.  All the video files are stored on a 500 GB Toshiba USB 2.0 external hard drive.  I have to say I am already experiencing hang ups, slow load time, NOT RESPONDING, and choppy footage when entering effects and titles.  Also just as a test I initially put 1.5 hours of 960P high deff footage off my GoPro and threw in some effects, transitions, and menu options to see if Adobe and my computer could handle it.  It did ok but it took almost 2.5 hours just to render and burn a single DVD. 
         I am used to similar crap on my wifes 400 dollar laptop but what do I have to buy for this thing to get it to just not stutter and work right.  I am very angry at this point since I was excited that I could finally get a computer and not be held back by poor performance as I have been in the past.  Any advice would be appreciated.

    Finding out exactly what is inside your video files will help you determine the correct settings
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
    >thought it would work like an up-convert to higher resolution
    No, you need to create a project that matches what you are editing

  • Footage Trouble With Adobe Premiere Elements 9

    Hey everyone, I am new to Adobe Premiere Elements 9 and I really need some help as I have a school project due tomorrow! My videos are filmed with the Nikon D3100 camera. I can play the clips individually no problem, but once I add effects, the clip becomes choppy and seems to be skipping. The audio is fine, it is just the video. When I play the whole thing from the beginning, it is choppy, but like I said; if I play one clip individually, it works. BUT, if i play a clip that has effects individually, it is choppy yet again. HELP!

    This is aimed at Premiere Pro, but may help
    Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link 
    Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
    - click the embedded picture in Harm's message to enlarge to reading size
    - you need AT LEAST 2 drives for video editing, 3 is better
    - some HD formats work better with (require) RAID
    Read Hunt on Partitions http://forums.adobe.com/thread/650708?tstart=0
    A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0

  • Adobe Photoshop Elements 10 searching for the update

    I have new versions Adobe Photoshop Elements 10 .  System: Windows 7 64  bit.  How I am trying to check updates: bookmark of help/updating I receive the announcement: "the server doesn't correspond to the update.  A temporal unavailability of the server can be a cause or is going pale placed Internet options or the network dam. repeat the attempt later.  Code of the mistake: U41M1C212 ".  I have a permanent access to the Internet and I didn't have such problems from test version.  I am seeking the solution or the help.
    Waclaw Nowak

    Hi,
    This  issue with PSE10 appears only on Windows7  when WIFI and LAN internet connections are simultaneously available . On your  machine please check for the same . If both are there then set OFF any one of them , this will start providing the network connection and updating the PSE . Actually this is a Known issue with PSE10 and has been fixed for the higher version.
    In worst case if this doesn't work then you can download update from given link and update your application. For PSE10 only one update for ACR is released.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5316 
    ~Nizam

  • I am having a problem reistalling adobe photoshop elements and premiere 9

    I am having a problem reinstalling adobe photoship elements and premiere 9.  my laptop had to be re configured and it was removed not i cannot reinstall.?  Please help

    Please refer to the proper Fora, this Forum is dedicated to Photoshop, not Photoshop Elements.
    Edit:
    http://forums.adobe.com/community/photoshop_elements

  • I have been using Adobe Photoshop Elements 11 for two years. I got a new printer and installed it although I did not remove my old printer from my computer. I used this program and my new printer for quite a few months, but today I deleted my old printer

    I have been using Adobe Photoshop Elements 11 for along time now. When I first used the program I had a different printer than I have now. Although I changed printers I never removed the software from my old one. Now this was never a problem until today. When I choose a printer I still had option to use the old one but always chose my new HP Envy 5530 and Adobe never had a problem printing from that new printer. However today I decided to remove my old printer from my computer and now my Adobe cannot find my new printer.  How can I make it find the HP printer?

    Try this --
    Go to the bottom of the link I gave you, and you will see
    click that link and then click the chat button to talk to an Adobe agent

  • Problem installing adobe photoshop elements 4.0 on to my new macbook air

    just tried installing previously purchased adobe photoshop elements 4.0 on to my new macbook air... it gave me an error and asked that i contact manufacturer... kinda cant wait til tomorrow... anyone out there that can help?

    This forum is only to discuss how the forums operate, not products
    If you go to the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the Adobe product you use
    When you go to the product forum "gave me an error" is really not enough information for anyone to help

  • Adobe Premiere Elements 11 - install on new computer

    I have previously purchased Adobe Premiere Elements 11 and have the serial number available.  How do I install it on a new computer using the serial number?

    jzd
    The important question is "Is this Premiere Elements 11 Mac or Windows?" If Mac, did you purchase it as the Adobe Premiere Elements 11 Editor from the Mac App Store?
    If it is Premiere Elements 11 Windows or Premiere Elements 11 Mac from Adobe, then you can download installation files at this late date from the following web site and then insert your purchased serial number during installation.
    http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
    If you do decide to go this route, make sure that you read Note: Very Important Instructions on that web site page, otherwise you will run into an Access Denied message.
    ATR

  • Unable to install Adobe premier elements 9 on new computer

    I received Adobe Photo Element 9 and Premier 9 some time but my old computer did not have the capacity to load it. I have  a new computer and cannot load the software.  How can I load it (from the CDs included with the package) to my new computer.  It is a Windows 8 system with an Core I5 processor?

    Hi there,
    Firstly, you should have installed PRE along with PSE in the first go itself, then everything would have been smooth. If you deferred the decision, then also there was no need to uninstall PSE per se. What could have been done is go to the installer media, browse to the "PRETrial" folder and then click on the Setup.exe of PRE installer to install PRE and at the serial number screen just choose the option to install in trial mode.
    Now, the error you are getting is strange. When I  search over web, I found this mentioned for Error 2755:
    This error may occur if there are  insufficient privileges on the %windir%\Installer folder, or the  inability of the Windows Installer service to create the  %windir%\Installer folder.
    NOTE: This behavior can also occur if  you have only Read permissions to the Winnt folder. This condition  prevents the Installer folder from being created by Setup.
    Can you please check that?
    Regards,
    Ankush

  • I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning

    I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning but it never ends up doing anything. Please help me with this issue. I really need to get this project started like yesterday. Thank you.

    dplum12
    What computer operating system is your Premiere Elements 12 running on? Did you have the opportunity to update 12 to 12.1 Update yet using an opened project's Help Menu/Update? If not, please do so when you get the opportunity.
    For now I will assume that your computer is Windows 7, 8, or 8.1 64 bit. Please try the following suggestions to overcome your Premiere Elements Sign In issue.
    http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
    and, if you get any messages about Internet connect and the computer clock, please review the following
    http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
    Please let us know the outcome.
    Thank you.
    ATR

  • I am trying to install Adobe premiere elements 8 on my new computer (Windows 7). The program ansvers with "the program not installed or can be damaged".

    I am trying to install Adobe premiere elements 8 on my new computer (Windows 7). The program ansvers with "the program is not installed or can be damaged". Then aborts the installation.
    It`s right, the program is not istalld, it is  what i`m trying to do. And there is no problem whit the DVD. Any suggestions?

    "Error 1303: Installer has insufficient privileges" or "Error 1304: Error writing to file" | Install | CS3, CS4, CS5 pro…
    this link FIXED MY PROBLEM! i did the steps to the programdata\adobe folder and it installed FINE!

  • Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal

    Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal Pre icon, File, Edit, Clip, etc.
    I am planning on purchasing Premier Elements 13, would it be better if I bought a new program rather than download an upgrade, just in case the upgrade doesn't load properly due to the error with my existing program?
    If I the deleted Premier Elements 9 on my PC would I lose all my existing videos that were produced using Premier Elements 9 or would they be saved so that they can still be worked on in Premier Elements 13?
    Does Premier Elements 13 work with Windows 7?
    Thanks
    Terry

    Premiere Elements 13 absolutely works with Windows 7!
    In fact, I'd highly recommend you download the free trial and give it a test run.
    Meantime, go to Windows Update and make sure you have all of the latest Windows updates, including those that don't install automatically. Then go to the nVidia or ATI site and ensure you have the latest driver for your graphics card, and go to Apple.com and ensure you have the latest version of Quicktime, per the program's requirements.

  • 'serious error' when creating a new project in adobe premiere elements 10

    Hello,
    I saw similar questions on the forums but not quite what is happening with me.
    First off I should say i've never had this working however the copy of premiere elements 7 we had worked perfectly fine. I am a technician in a school and i'm trying to install the software for the students (we have lots of lisences). The software appears to install perfectly fine and the launcher works. I click to create a new project (or open an old one) premiere appears to load up correctly. It only crashes once I click to browse for a location to save the file.
    The error message says, as i've noticed seems to be a generic message for any error on premiere: "Sorry, A serious error has occured that has caused Adobe Premiere Elements to shut down. We will attempt to save your current project"
    At first I thought this was student user rights (as students do not have access to C:\) however I have since tried it with my own admin account which has full rights and effectively should be able to do anything and it still continues to crash.
    The stations I am working with are:
    Operating System
    MS Windows XP Professional 32-bit SP3
    CPU
    Intel Pentium E5200  @ 2.50GHz
    Wolfdale 45nm Technology
    RAM
    2.00 GB Dual-Channel DDR2 @ 400MHz (6-6-6-18)
    Motherboard
    Intel Corporation DQ43AP (CPU1)
    Graphics
    PLE2008HDS (1600x900@60Hz)
    Intel(R) Q45/Q43 Express Chipset
    Intel(R) Q45/Q43 Express Chipset
    Hard Drives
    156GB SAMSUNG SAMSUNG HD161GJ (SATA)
    Thanks in advance to anyone who can provide some insight on this matter
    ~ Ash

    These previous discussions are not necessarily about PreElements, but they are about problems with trying to run on a network (which no flavor of Premiere is designed to do)
    http://forums.adobe.com/thread/851602?tstart=0
    http://forums.adobe.com/thread/771151?tstart=0
    http://forums.adobe.com/thread/858977?tstart=0

  • Adobe Premiere Elements 11 just doesn't start (Win7, 64bit, NEW image)

    Hi Everyone,
    While Adobe Premiere Elements 10 is just working fine, Premiere Elements 11 won't start. I choose "Video Editor" from the Welcome screen, then select either open project or create new project. I then get to see pink/grey status bar, but nothing else happens. Elements just won't start. Note: The Organizer is working fine.
    When I check the Win7 Event list, this is the error that I see:
    Faulting application name: Adobe Premiere Elements.exe, version: 11.0.0.0, time stamp: 0x5041d43d
    Faulting module name: dvacore.dll, version: 11.0.0.0, time stamp: 0x50408171
    Exception code: 0xc00000fd
    Fault offset: 0x00000000000e0dfb
    Faulting process id: 0x1064
    Faulting application start time: 0x01ce2a2c5a5b5a7a
    Faulting application path: C:\Program Files\Adobe\Adobe Premiere Elements 11\Adobe Premiere Elements.exe
    Faulting module path: C:\Program Files\Adobe\Adobe Premiere Elements 11\dvacore.dll
    Report Id: 9d16351a-961f-11e2-936a-463500000031
    I checked this community, where several other folks seem to have the same problem. Only few of them have found a solution, but none of them is working for me.
    I did install the most recent video driver.
    Does anyone know what to do based on the davacore.dll issue displayed above?
    Would apprecaite any hint!
    Thanks!

    You might have already seen these, but just in case one has some useful info, I'll post the links:
    http://forums.adobe.com/message/4405884
    http://forums.adobe.com/message/4469313
    http://forums.adobe.com/message/4041017
    Good luck, and maybe others have more direct input for you,
    Hunt

  • I purchased the Adobe Photoshop Elements 10 about 6 months ago. I want to install it to my new computer which is a Macbook Pro with no CD Drive. How do I do this?

    I purchased the Adobe Photoshop Elements 10 about 6 months ago. I want to install it to my new computer which is a Macbook Pro with no CD Drive. How do I install it when I got it in CD form?

    I doubt the license is affecting the performance - it might be a case of the software being too old for the machine.
    In any case, you can contact Adobe support thru chat and have them reset your activation count to eliminatre your doubts regarding the license.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Maybe you are looking for