New to arch with a tiny problem of xorg.......
Hi there,
I just installed the lovely archlinux in my PC,and everything is OK except the xorg.I could successfully start X without the xorg.conf file ,while I failed to start that with a xorg.conf file created from the Xorg.0.log file as the wiki states.So what's wrong with that?And if there is no xorg.conf,could I start compiz?
mutlu_inek wrote:
YZMSQ wrote:Thank you for your help,but could I start compiz without xorg.conf?I hear about that compiz wouldn't be started without xorg.conf.
Well, there I have to point you to B's posting above. Why don't you try it out? I neither run compiz, nor do I know what kind of chipset you have since you did not answer my question. Some systems will certainly run compiz without an xorg.conf.
I run lspci and it shows:
00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 04)
00:01.0 PCI bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 05)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 05)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 05)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 05)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d5)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 05)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 05)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 05)
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 05)
01:00.0 VGA compatible controller: ATI Technologies Inc RV370 [Sapphire X550 Silent]
01:00.1 Display controller: ATI Technologies Inc RV370 secondary [Sapphire X550 Silent]
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
PS: I use lxde and have xf86-video-ati,libgl,ati-dri installed.:)
Last edited by YZMSQ (2010-01-24 06:41:45)
Similar Messages
-
New Mac Mini with Lion Video Problem With Dell E228WFP monitor
Just purchased a new mini Mac 2.3 with Lion pre installed. I connected to my old Dell E228WFPI monitor via the Mini Display to VGA adapter. The mini mac worked fine for an hour until I put it to sleep. It would not rewake. After rebute the gray screen and apple logo appear with clock, but after clock screen to black and monitor goes to power saver mode. Took unit to apple store twice and could not resolve problem by changing resolution or other methiods. Finally, we learned that the system works fine using Belkin HDMI to DVI cable. This Dell Monitor had DVI connector. Hope this helps...
How can a computer that's been turned off (and I mean completely OFF) get a network request? Only a sleeping computer should react to such a request. If you're sure you shut down (Apple Menu, Shut Down), then only an internal power supply or logic board problem should cause this. The only way it could be software is if Lion is not shutting down the computer but is instead putting it to sleep. Is it a new Mac Mini? If so, you should have it replaced or repaired.
-
Brand new officejet 4630 with black ink problem and ok button doesnt work
Hi! I bought a new printer today, officejet 4630 and it included toner cartridges in the box. Iset it up like the sheet in the box said. After I had filled in date etc, I put in the ink ( and yes, remembered to check that it was compatible and take of the tape) Then this message showed in the display and still does: "Ink cartridge(s) problem. The following ink cartridges must be replaced" and a black dot. The cartridges were brand new and came in the same box as the printer. I have tried a reset ( taking out the cord for power supply, wait 60 sec etc) I also saw in Hp support you were to press "ok" to get rid of the message before restart. I can't press ok. It just beeps. No matter what button I press. Suggestions? Of course I can try with a new cartridge, but to paying $20 for a new cartridge when it was included in the box and should work is not ok.
Hi , Welcome to the HP Forums! I understand that you ar getting the error, "Ink cartridge(s) problem. The following ink cartridges must be replaced" with your black ink cartridge on your HP Officejet 4630 printer. I am happy to look into this cartridge error for you! Please, try the steps within this guide, A 'Cartridge Missing,' 'Cartridge Problem,' or 'Incompatible Ink Cartridges' Error Message Displays for HP Officejet 4630 and HP Deskjet Ink Advantage 4640 e-All-in-One Printer Series. If this guide does not resolve your issue, please contact HP, phone support for further assistance, as the ink cartridge(s) are under warranty. (After you fill out the information, you will be given a phone number.) If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector. Best of luck! “Please click the Thumbs up icon below to thank me for responding.”
-
The problem began after a recent Firefox update. Occasionally, when I try to open a new Firefox window, all I get is a grey screen with a tiny section of my homepage visible in the top left corner of the screen. NOTE: Firefox stores all of these aborted attempts, as, whenever I close it and then re-open it, the first time I open a new window it automatically opens all of the windows that had originally failed to open.
== This happened ==
Every time Firefox opened
== on or about June 26, 2010Got the exact same problem aswell, finally fed up with it now as i just started up firefox and 14 new windows opened because of this bug, luckily my computer can handle them but someone with a slower processor it would have been a nightmare, needs fixing ASAP.
Reverting back to 3.6.3 until this issue is solved. (link for anyone wanting to do the same below)
http://www.filehippo.com/download_firefox/7345/ -
When I try to login to the website of my bank, I get the following error message:
403 - Forbidden: Access is denied.
You do not have permission to view this directory or page using the credentials that you supplied.
I have a new MacBook Air with OS Yosemite installed.
What is the problem and how can I solve it?Some websites require a special client certficate for access. If you don't have that certficate, you'll have to contact the site operator to find out how to get one.
Sometimes the problem is caused by a web server that is configured to request an optional client certificate. Safari treats the request as mandatory. In that case, other browsers such as Firefox and Chrome may be able to connect to the site, because they ignore the request.
The first time you were prompted for a certificate, you may have clicked through a dialog that requested access to the Apple certificate in your keychain that is used to secure the iMessage service. In that case, you may be able to regain access to the site in Safari by doing as follows.
Back up all data.
Double-click anywhere in the line below on this page to select it:
com.apple.idms.appleid.prd
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Paste into the search field in the Keychain Access window by clicking in it and pressing the key combination command-V. An item may appear in the list of keychain items. The Name will begin with string you searched for, and the Kind will be "certificate."
Delete the item by selecting it and pressing the delete key. It will be recreated automatically the next time you launch the Messages or FaceTime application.
The next time you visit a site that prompts for an optional client certificate, cancel out of the prompt. You may have to do this several times before the server stops asking.
Credit for this idea to Christian Braukmueller of SAP. -
I was given a new phone because of a technical problem with my other. Everything was replaced because of iCloud but now it is telling me I do not have enough storage room on this phone to perform a back-up. Can I fix this?!
Why don't you call Apple tech support thru your provider. They will be able to help you in short order.
PS - If you want help here you need to provide a little more information i.e. how much memory does your iPhone -4- have and how much free memory do you have after restoring from the cloud? -
Hello,
I'm trying to install my HP Color LaserJet 2600n (USB) to my new macbook pro with Yosemite ? It detects the printer but when I try to install it, I get the message error : "Can't download the software because of a network problem."
I tried to install the software via the HP website. It's not working.
Can someone help me with this one ?
Thanks,HP Print Drivers
-
I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display. i have never seen this message before and i have 2 other macbooks and have had many other also. i am assuming this is a problem with the new macbook retina. does anyone know the exact fix to this issue? i have seen many sugestions to try to fix this issue but none have solved the issue for anyone that i can find in the Apple Support Community. thank for looking into this in advance.
******A true apple fan********Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
Bebers5 -
Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff
It is not possible to do that.
Allan -
Another New IPod Touch Owner with Wi-fi Problems
Another New IPod Touch Owner with Wi-fi Problems.
I have been working at this for about 4 hours now with no success and I am getting pretty frustrated, so if it show up in my typing please ignore it. I just don't understand why these multi-million dollar companies can't write a manual or put up a web site that can actually help someone with a problem.
Ok, venting aside.
I am running a gateway computer.
Operating System = XP
Router = Linksys WRT54G
I have two other computers that are working fine with the existing wireless net work and have been for some time.
I'm pretty good with my computer but haven't touched my router since initial set-up and all that was done was a basic set up.
My I-pod is searching for a network and I'm three feet away from it but it doesn't find it.
I printed out my wireless setting. I presume SSID name equals the name box on the ipod-touch
Security = WEP
What seems to be kicking my A$$ is the password. The route setting have never been changed so I would pesume the password should be the default "admin" which I put in (JOIN) and get the "Could not find network" screen
So, I have perused this message board trying to discover and answer to mine, and and apparently many others question with no definitive results.
So I guess what I and everybody else needs is a step by step how to guide on how to discover the info needed and enter in what we need to make this work.
Thanks in advance to anybody that can actually help with this issue. A step by step do this would be nice.Thank you Terpfen for replying, and please excuse my ill temper earlier. I've calmed down some now.
Step: 1 followed step one previously, Main screen, settings, Wi-Fi. Also set power down to 5 min to give I-Pod plenty of time to find network.
Wi-Fi Network Screen.
Wi-Fi ON
Choose a Network (searching indicator) symbol spinning.
Other ...
Ask to Join Networks ON
At this point the I-pod does not find any networks available. The indicator just spins but never returns any results. I am 3 feet for my WRT54G router.
Hence the easy connect isn't connecting.
The next step. is to manually set-up the connection.
Main screen, setting, Wi-Fi, Other.
press "Other" which brings up two fields
Name __________
Security ___________
First Question? Which Name are they looking for. when I went to my router 192.168.1.1 It has the name linksys. However, when I go to my Wireless Network setting it has the name * ???? * which is different than Linksys router.
Now, since one of the goals here is file sharing I presume I should be using the Wireless Network settings name. (which I have tried.)
Next is security, Wireless Network setting indicate setting for WEP Once this is selected you then back-up to the "Enter Network Setting Screen" and you now have a password line added.
Now I have never set a password for the router so the password for the router is the default Password "admin" And I don't recall ever setting a password for my network setting. But, I only use about three different passwords and a cycled through them still with no success.
So, I need some expert advise on how and where to find the info to input into the required field to work or what I need to reset in my router to make this work.
Thanks again for anyone who has constructive input to resolve my and probably many other peoples issues with this problem. -
i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your helpIt means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
1. Select Disk Utility from the main menu then press the Continue
button.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it
to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive. -
I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
i Just bought a new macbook pro with retina a week ago and used it twice, now it appears i have a tiny black dot on the screen with a nice tiny scatch. Will apple fix my screen since it is only a week old?
Have a good night down there in that 70-80 degree weather. I just shovelled my driveway earlier. Ugh.
"grass is always greener on the other side"
how about Geckos that crawl in at night and like to jump on your face while you sleep
Eeeek
they look at you in your own home like "wassup, what are you doin here?"
most here want snow, nothing says the holidays like sunburn and heat stroke. -
Having problem with spinning ball using final cut pro x with new macbook pro with retina screen
Having problem with spinning ball using final cut pro x with new macbook pro with retina screen
Update the software. There is no reason to run a two year old version.
Russ -
My mozilla does't opening new tabs & I am having very problem with my work due to this.Please tell me how can i resolve this problem
The Ask Toolbar is causing that in the Firefox 3.6.13 version. Evidently something in that extension isn't compatible with a Firefox security fix. Disable that extension or un-install it.
Maybe you are looking for
-
How to create a new tag in page properties in the sidekick of geometrrix page
how to create a new tag in page properties in the sidekick of geometrrix pagesame as basic, advanced, blue print??
-
Problems with java stored procedure.
I have a java stored procedure that uses a package called RmiJdbc which allows calling remote JDBC data sources from any java capable machine. I've loaded the RmiJdbc classes into oracle via the loadjava command and everything seems to come up valid.
-
How do I get additional iMovie Themes?
Is there any way to get or make additional themes for iMovie 6? I particularly like the Brushscript them in iDVD, but this is not one of the themes that comes with iMovie. Is there a way to modify the iDVD theme for iMovie, or to make a similar one f
-
DPM 2012 R2 Looses connectivity with Agents
We're receiving this errors: Event1: The DPM protection agent on server.contoso.com could not be contacted. Subsequent protection activities for this computer may fail if the connection is not established. The attempted contact failed for the followi
-
Average_wait column of v$session_event !!
Hi, all. English is not my mouther-tongue. I am confused of time unit in the v$session_event. From manual, AVERAGE_WAIT -->(in hundredths of a second) From v$session_event in my db, for example, event column --> gc buffer busy average_wait column -->