New to avchd and hd formats since upgrading from Pre3 to Pre10 ???
i have used Pre3 on XP with Mini-DV media for a long time now and am quite familiar with editing and exporting the edited videos to YouTube or to DVD. But now i have win7 64 bit, Pre 10 and a Sony XR160 HD camcorder and am now starting to shoot my videos on HD ( so far using the FX format of 1920x1080 / 16:9, 24 Mbps). editing on Pre10 is a little different and it is taking some to get used to but i did a small project fine but now i am confused about how best to output these HD videos. Should i save them as avchd and burn it to DVD or Blu-ray? or save them as some form of HD? can I burn avchd or HD onto DVD or Dual layer DVD??? or should i be getting a Blu-ray burner??? can you help bring me up to speed with all this new technology?
Thanks
As far as I know, you may not DIRECTLY go from HD to a DVD without down-rezzing the project (DVD resolution is FAR below HD)
There is a way to put a LIMITED amount of HD on a DVD... you do, of course, need a BluRay player to play back HD
BluRay image on a DVD http://forums.adobe.com/thread/871854
Similar Messages
-
Sound alerts not working in Mail and Ichat apps since upgrade to 10.4.9
I just noticed my Sound alets not working in Mail and Ichat apps since upgrade to 10.4.9.
I'm using soundsticks which is playing sounds thru quicktime, itunes, etc but my alert sounds for getting new emails and IM messages is not working. I get the quick "white flash" on the screen instead. I checked the prefs on both apps and it is set to give me the alert sound, I can even test it in the ichat pref when I change the new message alert sound it will play it thru my speakers but when I get a new message in either app it just gives me the white flash.
I'm read that it can be an issue of not having the balance in the system sound pref set the middle, so I checked that, restarted, all that but still no luck.
I really like the sound alert features because I can be in another part of my house, turn the sound way up and I'll know when one of my clients is trying to reach me but now I can't do that.
Any ideas?
Thanks in advance!
Brown.RecluseOk, weird, strange...did ONE more restart and now its working fine...who knows?
Me -
Why does my iPhoto open and run slow since upgrading to OSX 10.8.5
Why does my iPhoto open and run slow since upgrading to OSX 10.8.5? I have an Imac - Intel 2.5 GHz quad core I5 - with 20 GB of memory. Before the upgrade it was much faster.
Why does my iPhoto open and run slow since upgrading to OSX 10.8.5? I have an Imac - Intel 2.5 GHz quad core I5 - with 20 GB of memory. Before the upgrade it was much faster.
-
How can I sync my calendars on the MacBook Pro, iCloud, iPad and iPhone? Since upgrading to the newest OS on each device, none of the calendars sync. Any suggestions?
Hi silverk,
Welcome to the Apple Support Communities!
I understand the need for all of your calendars to be up to date across all of your devices and how frustrating it can be when they are not syncing as you would expect. In this situation I would suggest reading over and using the attached article for troubleshooting.
iCloud: Troubleshooting iCloud Calendar
Have a great day,
Joe -
Since upgrading from Mavericks to Yosemite Mail, Spotlight, Mission Control and App-Store don´t work correctly. Is it possible to return to Mavericks?
If you have an external drive with an OS X Time Machine backup, then do restore of your last backup. If you have an external drive with a bootable clone of your previous system, you can boot to that clone and re-clone the OS X on your external drive back to your Mac's internal drive.
If you do not have either of these available, then the reverting/restoring process becomes much more complicated and involves purchasing an external drive and backing up your current system to that drive, then erasing, reformatting your hard drive and now your only options to installng an OS X version is doing a clean install of OS X 10.6 Snow Leopard, then upgrading, again, to either OS X 10.7 Lion or 10.8 Mountain Lion. OS X 10.9 Mavericks is no longer available for download and Apple has not made OS X 10.9 Mavericks available in any other form to be able to redownload and install.
Maybe it would be better to explain in detail your issues with Yosemite to see if any of us here can help you with your difficulties.
I am not running or using Yosemite, so I cannot help you with your Yosemite issues,
There are others here who can help you with Yosemite.
Good Luck. -
Since upgrading from Windows Vista to Windows 7 both Internet Explorer and Firefox will not recognize the numbers keys of my keyboard. I get numbers in Word and every other situation, just not in the internet programs. I have tried uninstalling Firefox and reinstalling with no results.
If there are problems with importing the IE Favorites in Firefox then export the favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
If you do not have the menu bar in IE then right-click the toolbar at the top to enable the Menu Bar.
*Export the favorites in IE to an HTML file (bookmarks.html):<br>File > Import and Export
*Import the HTML file in Firefox:<br>Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML
See "Import from another browser" and "Import from file":
*http://kb.mozillazine.org/Import_bookmarks -
i bought a new macbook pro ,and i wnt to upgrade it to lion can i do that for free, if so how?, i bought a new macbook pro ,and i wnt to upgrade it to lion can i do that for free, if so how?
Apple has information at the link below.
http://www.apple.com/macosx/uptodate/
Stedman -
i have a mac and am thinking about upgrading from snowlepard to lion , is it a good idea and hard to adapt to
This is my "About This Mac" ... it shows I have Intel i7 CPU. If you are running SL, you at least have Intel, but would need at least Core2Duo an 2 GB (most people suggest 4 GB) RAM.
If you want to run Lion, remember that the discussions in this forum from last summer when Lion first came out (and since) were highly charged at times. Certain features that vanished or were added caused great heartache for some. Others love Lion, though. And some live with the changes waiting for any fixes they would desire.
Any PPC (PowerPC) applications you depend upon will not work under Lion. Use this page to see what applications will not run: http://roaringapps.com/apps:table
AND
Recall that you can clone your SL to an external disk to keep it safe. Then you can "experiment with" the new OSX (Lion or ML) until you know it works for you while still having your old SL safe in case you need it.
Good luck. -
I just received my new Mac Mini and want to migrate files from my Time Machine. I assume the old OS is on Time machine and I don't want it to supersede the new Yosemite OS. Do I have to Do anything special?
Using Migrations Assistant will only move the data and other things over, it will not bring over a previous version of the Os since the 2014 model can run anything earlier than Yosemite.
-
Sound broken since upgrade from 2.6.29
I wasn't sure if I should post this here or in the multimedia forum. Anyway...
I have an Echo Audio Mia-midi soundcard and sound hasn't been working properly for me since upgrading from 2.6.29. Both 2.6.30 and 2.6.31 share the same issue and reverting to 2.6.29 always solves the problem. It seems some driver infrastructure has changed, because the two "Line out" level meters are not available in alsamixer anymore. Instead I have VU-meters for front, rear, center, woofer and side. These can't be set however, and seem to have no impact on the output (they are sometimes set to 100% and sometimes to 0%, but output is silent in both cases).
Running echomixer (an Echo Audio specific mixer in alsa-tools) and playing sound shows that there is sound playing at full volume at the subdevice channels, but the "final" output is silent, even though all output channels are set at their proper values, including the output mixer. Raising the monitor mixer, effectively forwarding the input channels to the output works as it should, so as far as I can tell, the issue concerns the software/driver output to the soundcard.
I've tried everything I can think of to solve this, but nothing seems to help. I've run an alsa debug script in both 2.6.29 and 2.6.31, but the only difference worth noting that I can find is connected to the line out level meters. In 2.6.29:
Simple mixer control 'Line',0
Capabilities: pvolume
Playback channels: Front Left - Front Right - Rear Left - Rear Right
Limits: Playback -128 - 6
Mono:
Front Left: Playback 0 [96%] [0.00dB]
Front Right: Playback 0 [96%] [0.00dB]
Rear Left: Playback 0 [96%] [0.00dB]
Rear Right: Playback 0 [96%] [0.00dB]
state.Mia {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 4
comment.range '-128 - 6'
comment.dbmin -12800
comment.dbmax 600
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
value.2 0
value.3 0
Both of these parts are missing from the output in 2.6.31.
I don't know what to do next. Any help would be greatly appreciated.I wasn't sure if I should post this here or in the multimedia forum. Anyway...
I have an Echo Audio Mia-midi soundcard and sound hasn't been working properly for me since upgrading from 2.6.29. Both 2.6.30 and 2.6.31 share the same issue and reverting to 2.6.29 always solves the problem. It seems some driver infrastructure has changed, because the two "Line out" level meters are not available in alsamixer anymore. Instead I have VU-meters for front, rear, center, woofer and side. These can't be set however, and seem to have no impact on the output (they are sometimes set to 100% and sometimes to 0%, but output is silent in both cases).
Running echomixer (an Echo Audio specific mixer in alsa-tools) and playing sound shows that there is sound playing at full volume at the subdevice channels, but the "final" output is silent, even though all output channels are set at their proper values, including the output mixer. Raising the monitor mixer, effectively forwarding the input channels to the output works as it should, so as far as I can tell, the issue concerns the software/driver output to the soundcard.
I've tried everything I can think of to solve this, but nothing seems to help. I've run an alsa debug script in both 2.6.29 and 2.6.31, but the only difference worth noting that I can find is connected to the line out level meters. In 2.6.29:
Simple mixer control 'Line',0
Capabilities: pvolume
Playback channels: Front Left - Front Right - Rear Left - Rear Right
Limits: Playback -128 - 6
Mono:
Front Left: Playback 0 [96%] [0.00dB]
Front Right: Playback 0 [96%] [0.00dB]
Rear Left: Playback 0 [96%] [0.00dB]
Rear Right: Playback 0 [96%] [0.00dB]
state.Mia {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 4
comment.range '-128 - 6'
comment.dbmin -12800
comment.dbmax 600
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
value.2 0
value.3 0
Both of these parts are missing from the output in 2.6.31.
I don't know what to do next. Any help would be greatly appreciated. -
Since upgrading from Lion to Mountain Lion, when I login 1 of 2 disk images I have set to open on login does not mount. It worked under Lion. Stickies opens just fine. The disk images are sparse disk bundles. Are there any suggested remedies? I have already tried repairing permissions. One interesting thing is that previously in LIon, the disk images were just sparse images, not sparse bundles. I switched to bundles after reading that Time Machine backups of sparse bundles would not copy the entire image, only the changed parts. The sprase images are for sharing of photo and iTUnes libraries among multiple family member on the same computer.
If it is working as expected, what do you need with the old backup?
If you want to be able to go back to where you were prior to an upgrade, isolate that backup and don't use it again. As far as Time Machine can tell, the whole drive changed.
The link I posted contains probably everything that anybody knows about Time Machine and how to manipulate it to work as you would like as opposed to how it was designed to work. There are FAQs to continue a backup as opposed to starting fresh, but I wouldn't recommend it for the reasons above. Pondini probably doesn't, either.
If you are going to do a wholesale upgrade of the OS, I would create a bootable clone using something like Carbon Copy Cloner or Super Duper. A bootable clone on an external drive can have you back up and running instantly if the upgrade fails in any way. If the upgrade goes fine, store it away in case you find the current system isn't to your liking. -
How do I switch my 6th generation over to my new iTunes account and put all my songs from my iPhone onto it?
The iphone is not a backup/storage device. The sync is one way - computer to iphone. The exception is itunes purchases. File>Devices>Transfer Purchases
It has always been very basic to always maintain a abckup copy of your computer. Use your backup copy to put everything back. -
How do I transfer all my Firefox saved passwords to my new hard drive and operating system? Going from xp to windows 7. I have the old hard drive hooked up as drive f. Can I copy and paste from old drive directory to new drive directory?
You need to copy 2 files, key3.db and signons.sqlite, from the old [[profiles|profile folder]] to the profile folder on the new computer.
-
i just bought a new Macbook Pro and loaded all my info from My old Macbook...now i can't remember for the life of me my Admin Password (which i created 3 years ago)...is there ANY WAY to bypass this on my new Macbook Pro and begin again...?
I assume that you don't have the installation discs, so:
1. Reboot
2. Hold command + s key down after you hear the chime.
3. When you get a text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
(Type these commands very carefully)
mount -uw /
rm /var/db/.AppleSetupDone
shutdown -h now
4. You will go through the setup process again, create a new admin account, login to it and then change your existing account password or whatever else you need to do. You can delete the account you made in this process, or not. -
HT4946 i locked my new ipod touch and cant it back open from the computer help.?:(
i locked my new ipod touch and cant it back open from the computer help.?:
First:
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with defect cables
- Try another charging source
- Inspect the dock connector for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar
If you get it to charge then:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X
Maybe you are looking for
-
Multiple lines in a cell in excel download
Hi, I have used insert_full of i_oi_spreadsheet interface for downloading internal table.. i have a text field which i need to display in multiple lines in one cell. Is that possible? Please help, Regards, Rohit.
-
I need to fill in details from a Windows document, which I download, I then have to forward by email to other receipients, but they cant open the document, what do I need to do please? I have tried sending it back to myself and I can open it so it ob
-
My MacBook Pro changed to windows could it be something with the bootcamp
I was on my cousins MacBook Pro and it died on me so I was gone for a few hours and came back and charged it and turned it on and it was in windows softwear what do I do? Could it be something with my bootcamp because i called apple and the guy told
-
I've been working on a project for sometime, and until yesterday, everything worked fine. Now, all of the .avi files in the project can't be found (though they've never been moved), and when I reimport them, they are only found as audio files. I've u
-
I have an HP Pavilion a6000, recently upgraded to Windows 7. My internet connection has stopped working for no reason, but there is no error listed in Device Manager. To the best of my knowledge, the internet connection is set up correctly. I also ha