New to computer based recording - have a basic question

Hello all,
I have been recording on a stand alone multi-track machine for some time. I'm wanting to expand how many tracks I have and utilize the editing possibilities of Garageband 3. So, here's my basic question. I already have some songs recorded on the multi-tracker. The unit has the ability to export each track as a wav. file to the computer. I'm trying to find a fairly simple computer program that will allow me to import each track, remain in sync, and continue adding new tracks from the stand alone. For example, say I record 14 tracks on the stand alone and I still need another 10 tracks. I loathe bouncing because of the loss of control. Using Garageband 3, can I import the 14 tracks to a separate track each, record another 10 tracks on the stand alone, import those 10 tracks into the same project as the other 14 tracks, remain in sync, and then be able to edit, sweeten, etc all of the tracks? I have no real desire to record direct to the computer since I have a really nice set up already. I just want more tracks and the ability to edit them better than on the stand alone. Any help with this would be greatly appreciated.
Randy

Hi,
Yes, you can, as long as all your Tracks have the same Start point.
WH

Similar Messages

New to camera raw and have a basic question

Hello,
I have just started playing with camera raw and when I make changes, and say done, I am able to open that image up and continue with the corrections, which is great.
but.....
If I open up an image that has been edited in camera raw, and I want to get back to the original and start again, how would I do that?
thanks
'babs

I don't know if you made a small typo, but you don't want to "Reset Camera Raw Defaults" - that affects all future file opens (assuming you have saved custom defaults for your camera in the past).
You just want to check the entry Camera Raw Defaults up near the top to affect the selected image(s) alone.
-Noel

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Can i install cs 6 on a new powerfull computer ? I have license code and product code

can i install cs 6 on a new powerfull computer ? I have license code and product code. I buy a student & teacher edition up 2013

Sure. It's yours.
Mylenium

I just got a new iPad 2 and I have lot of questions. I was able to wirelessly link my iPad and iTunes on my PC. I was able to SYNC my email and calendar (new only no history), however I have not been able to SYNC Outlook contacts.

I just got a new iPad 2 and I have lot of questions. I was able to wirelessly link my iPad and iTunes on my PC. I was able to SYNC my email and calendar (new entries only no history), however I have not been able to SYNC Outlook contacts. Outlook has multiple contact lists. Only one has any data. I can't find a way to delete the others and I can't keep the one I want to use at the top of the list. Any ideas?
I have a question about email. I have several thousand emails in 10 or so days. How can I select multiple emails for deletion in stead of one at a time? How do I designate emails from a given sender as junk or block certain senders?
Ron

the spcs page on this site state which video formats the ipad supports
I'd suggest converting your old videos to one of those formats
handbrake is a free program which does this for you
itunes used to be able to too when I right clicked incompatible media but don't see the option any more
or maybe it only show when one right click incompatible media and currently my lib don't have any
about the music then it's odd what formats are they?
if they are acc protected have you tried to remove the DRM this can be don using itunes as
apple don't use DRM for music any more

I have a brand new mac computer, I now have 3 downloads of firefox and want to delete 2 of them but it won't let me.

I have a brand new mac computer. I went to download mozilla/firefox and ended up with it 3 times. It will not let me delete the 2 extra copies. How do I get rid of them?

What kind of error do you get if you try to drag a copy to the trash?

HT1329 I have a new mac computer. I have an iPod classic. I no longer have my old PC computer. How do i get my song onto my new computer from my iPod?

i have a new mac computer. i have a idop classic. i have songs that i put on my itunes account that i did not purchase from itunes. i no longer have the old pc. How do i transfer my songs from my ipod to my new mac?

See here > http://www.apple.com/support/ipodclassic/how-to/
OR here > http://www.apple.com/support/ipod/earlier/

New used computer doesn't have iPhoto so can't transfer pictures from old computer without upgrading new one. Is there a way to download an older version of iPhoto?

I can't access any of my iPhoto pictures from my old computer since the new (used) computer I got doesn't have it. The new one is a newer version but the applestore only has the iLife 11 which would need me to upgrade. I'm not against upgrading I really just want to access these photos. I used an external harddrive to store the pictures from my old computer and am assuming that the only reason they're not showing up on the new one is because it doesn't have the applicatin (makes sense).
Is there a way to get an older version of iPhoto?
The pictures from iPhoto that are on the external harddrive will show up if i had to the application right? Will they show up on a newer version of iphoto even though they're originally from an older version?
Ahh sorry if this is confusing I'm just really frustrated at technology right now..../////

Is there a way to get an older version of iPhoto?
I suggest you don't do that. There is no guarantee it will work right with a more recent OS.
Install the correct version of iPhoto for the version of Mac OS X you are running. (Which is what?) The folks here will tell you how to get to the Library on the external drive when you provide more info about your computer.

I have a 2003 Ipod, I have bought new ASUS computer and now have my itunes on it but it is not wanting to sync with my ipod

I have a 2003 ipod. New ASUS computer with my original itunes installed now.
Do I need to download a new version to save to the ipod to be able to transfer my music?
Please help!

Hello Tamatha,
So you transferred your original iTunes library to your new ASUS laptop? If so, simply connect your iPod and keep syncing it as you always have.
B-rock

How do i sync all my iphone 5g photos and contacts to my new windows computer. I have followed instructions but the following instructions don't seem to exist!!!In iTunes, in the source list, under Devices, click the entry for your iPhone or iPod touch.

How do i sync all my iphone 5g photos and contact to my new windows computer. I am following the itunes instructions but they don't seem to apply. In the source list click devices (so far so good) then click the entry for your iphone or ipod. that doesn't exist. HELP asap

hayley7070 wrote:
How do i sync all my iphone 5g photos and contact to my new windows computer. I am following the itunes instructions but they don't seem to apply
What instructions?
In the source list click devices (so far so good) then click the entry for your iphone or ipod. that doesn't exist. HELP asap
You don't import photos from the iPhone to your computer using iTunes.
See this -> iOS: Importing personal photos and videos from iOS devices to your computer
Note this only applies to photos taken with the iPhone. Any photos you previously added to your iPhone using iTunes should be copied from old computer to new computer.

I am new to the Mac and have a stupid Question

So I am not really this stupid but would love it if someone could tell me how to remove a program.
I downloaded some driver software in order to set me up onto the network printer at work. Along with that software came some sort of device locator for which I have no need nor patience. The file name is "com.brother.ControlCenter.plist" and the program name is "Brother Control Center Ver. 2.4.3"
I have deleted the file from the program list, I have changed the preferences of the program to try and disable it from launching at start up. I have drug it into the trash on the desk top and emptied the trash immediately after and through all of this my nemesis continues to launch at start up and then prompt me for a device choice.
Please tell me how to completely remove this program file.
Thanks

Once you sort out the problem, see these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac 101: Mac Essentials,
Anatomy of a Mac,
MacFixIt Tutorials,
MacTips, and
Switching to the Mac: The Missing Manual, Leopard Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

I'm a new MacBook Pro User, I have a battery question?

Finally at last I have my macbook feels good to leave windows.
How to use properly my battery?
I use my computer most the time at home rarely, except for school It leave my house. Due to previous experience with laptops when ever I keep them plug in with the charger the battery later don't hold charge do this problem also happen with macbooks? or once that the battery is fully charge does the macbook automatically stop charging it and just keeps on running on the power plug?
Should I do the same as I do with my iphone charge it completely use it till my battery almost dies or hit 7% than connnected?

I wouldn't allow to discharge to less than 10%. Same for your iPhone.
How to optimize your Mac and iPhone batteries...
Apple - Batteries - Notebooks
Apple - Batteries - iPhone
or once that the battery is fully charge does the macbook automatically stop charging it and just keeps on running on the power plug?
If you disconnect the adapter, the battery will discharge. It will only charge the battery when it's necessary.

New to Spiceworks and I have a simple question

So yes I am new to spice works and maybe this is a stupid question but here it is. Spicerworksis installed and users are able to login and create tickets. We have AD intergration. But am I able to create a ticket for a user that has never used Spiceworks before. I was hoping that If I had to create a ticket for a user i could and Spiceworks would connect to the AD user. But instead if they never used Spiceworks it doesn't see them or allow me to enter their name. If any one could please tell what I'm doing wrong and how I can correct it.
Thanks
This topic first appeared in the Spiceworks Community

The launch of Windows 10 signals a renewed focus by Microsoft on the mobile-enabled modern enterprise. With Windows 10 and SOTI, enterprise IT can take advantage of unified policy management and feature control, making it easier to manage the full breadth of devices across diverse use cases and lines of business. This Tech Note provides an overview of the key enterprise features of Windows 10 and provides insight into the policy management framework available in SOTI MobiControl for managing Windows 10 desktops, tablets, and smartphones.http://www2.soti.net/windows10technote?utm_source=SpiceWorks&utm_medium=Download&utm_content...

Just purchaed a new 2.66ghz mac pro, have a few questions

Hey guys, i've been finally reading the forums a bit trying to wet my appetite for the new mac pro arriving today via fedex.
I bought the 2.66 quad with the 7300 video card, 1gb ram and 250gb hd. I bought this from apple refurb for $2100. I already purchased an addition 500gb perpendicular hd. I can get ram cheap, so im not to worried about that. Here are my questions:
1) I have a westinghouse 37" lcd 1080p monitor (1900x1080 res) Will the 7300 be enought to drive this monitor?
2) i had a standard logitech surround sound witht he 3 wire setup, i know the mac pro has toslink, so i bought logitech z5500 setup that has the dolby digital and toslink built in. Will this work witht he mac pro without any problems and is it a good set of speakers?
3)My needs for the mac are pretty simple, music, photos, video conversion and editing, internet, and light gaming. Do you think the 2.66 will be enough, or should i go with the 8 core? I think the 8 is overkill, but i am new to macs so thats why im here!!
Thanks,
Frank

Hi Ultravox. I just got the same rig as a refurb, tax free no less due to this being my state's tax holiday. Good call on the memory as I just ordered my extra from Crucial a few days ago and it's already here - and WAY cheaper than Apple's.
My 2 cents, the nVidia card gets a pretty bum wrap. While it's true the ATI would be better for gaming, I don't think it will make any difference for straight video editing that is, without a lot of realtime motion effects. To the extent you have such you can just render to view, which will be really fast with these CPU's. I've looked at all the benchmarks and what it means for games is to get playable frame rates on some of the 3D titles you will have to lower the resolution. Not ideal, but I think acceptable for a light duty gamer. I have to do this now on my G4, which has an even less capable video card than the 7300. I considered buying a new 2.0 GHz machine and getting the ATI as a custom option (if new) or add-on kit (if a refurb), but decided I could live with the 7300 for a year or so and upgrade later. To get the 2.66 with the ATI would have busted my budget. For long-term use, the processor upgrade is worth more, since graphics cards change constantly and can be upgraded easily. It may also be that Apple comes out with some more graphic card options going forward, as I'm not that thrilled with some of the complaints I read on how noisy the ATI can be. It would be nice to have an option in between the nVidia 7300 and the ATI. Here is a fairly positive review of the 7300, although, admittedly not being used for any gaming.
http://www.architosh.com/features/2006/reviews/macpro/macpro_1.html
Steve

New to Internet Sales for ERP - Few basic questions.

Hi,
We are going to implement Internet Sales for ERP and I have some questions.
1) Is Product Catalog Mandatory for implementing Internet Sales for ERP / R3?
2) We are already using MDM for catalog and we are not the Product Catalog module in R3. Will there be a problem implementing MDM into ISA? Has anyone implemented ISA with MDM as product catalog?
3) We are planning to make it an extra-net application; what is the best architecture placement of the ISA server? Should we have it in DMZ or outside DMZ. What is the best approach among option a and b?
a) Web Browser (Internet) -- External Firewall -- Webserver + ISA server -- Internal Firewall -- ERP
b) Web Browser (Internet) -- External Firewall -- Webserver -- Internal Firewall -- ISA server + ERP
Please Enlighten.
Thanks,
Deepak

Hello Deepak,
1) Is Product Catalog Mandatory for implementing Internet Sales for ERP / R3?
Catalog is an independent piece of feature and integrated to the basket (or the selling process). You can hide the internal catalog by a switch in the Shopadmin XCM administration - Catalog tab._But_ you may still need a catalog (internal) for reading variant data. However, no replication is required.
2) We are already using MDM for catalog and we are not the Product Catalog module in R3. Will there be a problem implementing MDM into ISA? Has anyone implemented ISA with MDM as product catalog?
ISA works with external catalogs with ease. All you need is to make use of the Open catalog Interface (OCI) feature. After all, OCI is a SAP technology, and all its products must be capable of understanding it. Isn't it? SAP MDM catalog is OCI enabled.
3) We are planning to make it an extra-net application; what is the best architecture placement of the ISA server? Should we have it in DMZ or outside DMZ. What is the best approach among option a and b?
a) Web Browser (Internet) -- External Firewall -- Webserver + ISA server -- Internal Firewall -- ERP
b) Web Browser (Internet) -- External Firewall -- Webserver -- Internal Firewall -- ISA server + ERP
(b)
Please Enlighten.
Let there be light - Funny thing, showing light to Deepak?
Easwar Ram
http://www.parxlns.com

New to computer based recording - have a basic question

Similar Messages

Maybe you are looking for