New to ESSBase. Installed successfully. How to configure SQL Source.

Hi,
Installed the following.
Installer
Foundation Services
Studio
Client
Within the Administartion Services console I am doing the following.
Created and application, db and outline.
Go to Data Prep Editor and try to use a SQL Source.
The SQL Source and Substituion variables options are disabled.
In windows I setup the ODBC sources.
What else needs to be done?
Thanks
Chandu.

Did you set up the ODBC on the Essbase server and did you set it up as a system dsn? It has to be set up there to work. Also, others might have, but I've never gotten it to work properly unless I used SQL authentication.

Similar Messages

I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page- can't move to the main page – any idea on what and how, please?

Hello, I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page… can’t move to the main page – any idea on what and how, please?

Welcome to the Apple Community.
Unfortunately, a number of users appear to have encountered this problem. Some of these users have reported that the problem just disappears the following day or shortly after. Other users have found various other solutions to this problem.
Firstly, are you receiving any date and time errors when you turn on your Apple TV?
Check that you are properly connected to the Internet, by ensuring that you have a proper IP address and not one starting with 169. Also check that your location for the iTunes Store is set correctly, if so you might try changing it and then changing it back.
If the problem persists try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router, or if this doesn't work you might like to try a restore.

Printer not connected since new Windows 10 install. How to fix/

Windows 10 installed yesterday from Wind. 7. Printer worked on only 1 printed then note stated it was not connected tothe computer. No change has been made other than new Win. install. How to get problem diagnosed and fixed?

Take a look at this link.

My old iMac broke so i got a new hard drive installed. How can i retrieve my old purchased items?

hiya
got a new hard drive installed and couldn't retreive anything off my old hard drive
can i get my old purchased items from itunes
thanks

Hi hopscotch,
Log into the iTunes store and do a search to find your previously purchased items. Click the "Buy" button, and put in the same iTunes id and password that you originally used to purchase. A dialogue box will come up indicating that you have already purchased this item and do you want to download it again for free....
Say yes, and it will be re-downloaded to your Mac.
Hope this helps!
Cheers,
GB

How to configure BAPI Source system in BW3.0B

Hi all,
I am using BW 3.0B, i am extracting CSV file from website and want to load its data into infocube for analysis, the problem is for this i need to configure BAPI source system and then i can use DBConnect functionality to get data from CSV,
please inform me how this is possible.
Thanks in advance.

Hi,
please read:
http://help.sap.com/saphelp_nw04/helpdata/en/50/63d6b37bda7f4a92e2dec21b14ceee/content.htm
regards
michael

How to connect sql source

Hi, <BR>iam useing hyperion essbase 6.5.i check my essabse server is working for sql file.its working.but the problem is when ever is able to import sql oracle data data preparation window it say that "sql source is not availble".one more thing is i create one odbc dsn also? <BR>if any one tried it send the details how can i solve the problem

Hello,
Please do the test I mentioned above. Try to get connected using SQL Server Management Studio first.
Please enable TCP/IP and Named Pipes protocols.
https://msdn.microsoft.com/en-us/library/ms191294(v=sql.100).aspx
Configure Windows Firewall or disable it.
https://msdn.microsoft.com/en-us/library/cc646023(v=sql.100).aspx
Open SQL Server Configuration Manager and make sure SQL Server service is started.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

New tab content hijacked with Firefox competitor when new software was installed. How to change it back to blank?

Hello.
I installed a new free software app and it had an option to add a competitor of Firefox's toolbar and change the home page, I believe. I first unchecked it but because of a hiccup during the installation, the checks reappeared and I couldn't change it.
Now, every time I click to get a new tab, FF's competitor's search box is on the page.
'''Q: '''How can I change it back to blank ? I've found out that it is not the home page feature and I don't see where to make the change in the tab preferences.
Thanks.

Thanks for your reply.
I uninstalled the main software which I didn't get it to work in the limited time I had. I may try later, though. The toolbar and that page on the new tab were not part of the uninstall routine.
Hopefully, there is another way to revert back to the blank page.
Thanks.

No Disk-New Hardware Not Installed Successfully .

I have been trying to get my pictures and videos from my new Samnsung Reality for about a month now and add music to it and everytime I plug the USB in ,it tells me I need a disk .Well I did not receive a disk when buying the phone and apparently without this disk ,it will not install to my computer right .
I am going out of town a week from today and would really appreciate it if I had music to listen to on my 8 hour drive .And ,my pictures and videos are piling up in my phone and on my card memory .I have never had this problem before with my last two phones from Verizon and didn't have a disk then either ,I don't understand what the problem is this time .
I also am not finanicially stable to afford any Vcast or Rhapsdy at the moment .

That's cool -- I didn't know that there were phone drivers at that link, too. We've been downloading our drivers from http://www.vzam.net/download/download.aspx
I looked at your link
http://www.vzam.net/vcastmusic/Step2.aspx?manufacturerID=4
and I think the driver you linked to is not for the Reality but instead for a different model the Rogue u960. Unfortunately I don't see the Reality listed among the Samsung models at http://www.vzam.net/vcastmusic/Step2.aspx?manufacturerID=4
We have the u370 which is basically a re-release of the Reality. There's a link for a driver for the Reality u820 / u370 here: http://www.vzam.net/download/download.aspx
When you run the file, it will first install the driver:
"Installing Samsung Mobile USB Driver, this may take a few moments ..."
Then it will try to install a second component which has *not* been necessary for our needs called VZAccess Manager
"Welcome to the InstallShield Wizard for VZAccess Manager"
Just click cancel to cancel the installation of VZAccess Manager.
Upon the driver being installed, we haven't had any problems transferring files back and forth between the phone and the computer.
I want to forewarn you about playing music on the Reality / u370. They have a bug which has never been addressed by Verizon or Samsung. There's no problem playing music through the speakerphone or through bluetooth headphones. But many many people including myself have reported that when you plug in either headphones or a headset to listen to the music that the phone will eventually freeze and/or suddenly be unable to be aware that there's a memory card inserted into the phone. If that occurs, you have to turn off the phone then turn it back on. There are some lucky people out there who have not encountered this bug while headphones or a headset are plugged in.

How to configure Sql Server 2008 R2 for debugging without disabling Windows Firewall?

When I try to debug a procedure in Sql Server 2008 R2 I get a dialog box telling me to unblock some ports.
>>
The Windows Firewall on this machine is currently blocking remote debugging. Remote debugging requiers that the debugger be allowed to receive informatino from the network. Remote debugging also requires DCOM (TCP Port 135) and IPSEC (UDP 4500
/ UDP 500) be unblocked.
<<
I went to the Windows Firewall and added some new Inbound rules for each of the specified ports (in the images below. But after this and rebooting entire computer -- I still get this dialog box when I want to go into debug mode from SSMS. I can
actually kind of debug standalone code in the SSMS window if I cancel the dialog box. But I can't debug an actual stored procedure -- which is what I need to do. I also noticed that my server has an IP address instead of LocalHost. This is
not a public Server -- it's my private development machine which is on a peer to peer network (with one other workstation), but I don't need that workstation to be able to access this server.. Would localholst make a difference for debugging? How
should I configure the sql server? The firewall?
Rich P

Use PRINT and SELECT for debugging. That's what I do. I used to play with the debugger in SQL 2000 and older days, but I realised that I spent more time on getting it to work that I gained from using it.
I thought about that. I guess that IS the way to go. Very well. Thank you for the suggestion. Although, when the debugger does work in the regular window (not a stored proc because it doesn't work there) the debugger IS nice.
For debugging my proc I am thinking I will insert param vals into a test collection table for now. One obscure error I am getting with a particular proc -- in a When loop on one parameter I get the "value will be truncated" error -- but everything
is set to accept 1000 characters and none of the source data even comes close to 1000 characters. I have isolated at what point the error occurs and which section of data where the error is occurring but I have not isolated the cause of the error.
I cannot reproduce the error when I run the procedure by hand in a regular query window with the exact same code. The error only occurs when the code is run in the stored proc.
Rich P

How to configure Data Sources in a Package Configuration?

Good morning,
I'm trying to create a configuration file to deploy my SSIS package on which I have defined 3 data sources shared between several different packages.
When I open the package configurations option and I create a new file configuration, I can select on it the connection managers defined for the data sources but not the proper data sources.
It's the first time that I use data sources and I try to create a configuration file for them so I don't know if I'm doing something wrong or my concept about the use of the data sources is wrong.
Could someone give me a tip/article to know how I can create the configuration file to deploy my package?
Thank you,
Virgilio

What do you mean under "but not the proper data sources"?
Arthur My Blog

How to configure SQL Server to allow remote connections

Hi,
This is RtPrasad.I am working in some software company.I am supporting an application in one of the projects.I am using windows 7 OS and SQLServer 2008 r2.When ever I am trying to connecting to the test server through SSMS from my lenovo thinkpad,I am getting
an error as shown in the screen shot.I searched a lot in the google and I went through the many sites.In those sites,below is the URL of one site.
http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx.But Still I am getting the same error.Can anybody please solve this problem as soon as possible.Thanks in advance.
Thanks&Regards,
RtPrasad.

are you connecting to office network through vpn? or is it that the sqlserver open to internet access?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How to configure SQL*Net to survive minor dropouts?

Hi,
We have recently started developing over a VPN to our server. The VPN is not brilliant and we get minor dropouts for a second or so. This is causing SQL*Net to dropout and we need to re-connect and re-start all our Apps (SQL*Plus, Forms Builder, etc).
Is there an SQL*Net setting which can keep the connection open, even if the network drops for 1-2 seconds?
Cheers,
Tim.

Yes, a VPN is extremely important. Just as it's the job of DBAs to protect and maintain data, it is the job of a Network Administrator to keep the network functioning correctly. I'd say that having your NAs take care of the VPN problem is paramount to not only solving your issue, but also in keeping your company's infrastructure on-track and maintainable.
P.S. I was an NA in one of my previous lives :(

How to configure data source for MS SQL 2005 Server.

Good morning,
While creating a data source for MS SQL 2005 Server, what are the values I should use for:
Object Factory, DataSource Type, and CPDS Class Name values ?
Thanks
Seenu

seenuFour wrote:
Hi,
I am working on a web application, the backend of which is a MS SQL 2005 server. I am creating a data source on the application server to manage the connection pool.
Hence I need to give the following values while creating the data source:...
Hence you need to provide some actual detail about what the context is.
IIS runs "web applications" but your question would have no meaning in that context. On the other hand it might have some meaning if you were running Tomcat.

How configure sql developer/Oracle on mac?

i am thinking to buy a new (macbook Pro, I7) , but i am stell ind doubt because, i work at a software company, so I need to install Oracle 10g, sql developer or sql navigator 6.2, Oracle, Devsuit, Visual studio 2010, whithout them, i can not work. i nead to learn how to configure sql developer or sql navigator to connect database Oracle? you can send me a link if you have one.
thanks.

thanks, for reply, but what i need to know is how to install Oracle Devsuite on mac SO withoth install windows on virtual machine.

How to configure oracle 10g with clients

Hello sir i am a database user.
I want to install an oracle 10g (Client server architecture)
As i have a licenced Oracle 10g CD Pack.
Pls help me how to install Oracle & how to configure its clients.
As i have a server(running server 2003 ) in it and corresponding clients.
Thanks
Edited by: user10439074 on Oct 30, 2008 4:03 AM

Read the documentation (I have given following links assuming you are running a 32 bit architecture)
Server installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14316%2Ftoc.htm&remark=portal+%28Books%29
Client installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14312%2Ftoc.htm&remark=portal+%28Books%29
You can find the required books (if not using 32 bit architecture) from
http://www.oracle.com/pls/db102/portal.portal_db?selected=3

New to ESSBase. Installed successfully. How to configure SQL Source.

Similar Messages

Maybe you are looking for