New to flash remoting... need help!
Hello all,
I just started with Flash 8 on my own, I am intermediate
level, and I am studying Action Script 2.0.
I need some suggestions on what books to use, and what to
study to accomplish connecting SQL or MS-Access to Flash.
I will be working on a database project in 6 months, and I
would like to do it in flash instead of dreamweaver.
All suggestions are welcome and appreciated.
I am using: IIS and Coldfusion7.
thanks in advance for all t he input
I read what she says - i understand what she says - before i
bang my head against the wall, i will
ask one more time - what do you mean by "VIDEOS"?????Is this
imported FLV format? Are you using the
term "video" in the generic sense and what you really have is
a flash animation made with symbols
and the timeline? What are we talking about here? Why are you
refusing to answer this question? I
have asked 3 times.
If you have videos in some format like MPG, MOV, AVI, and
need to add sound to them, well you are in
the wrong forum as this has nothing to do with Flash. You
will need a video editing program. Once
you get a video editing program (Final Cut, premiere, etc...)
consult their help docs or use the
universal approach of File > Import. Then you will need to
get the imported audio onto a track in
the timeline which is usually done by the ole drag n' drop
method.
But perhaps, since you are asking here on a "FLASH" forum - i
suspect you have a flash timeline with
animation on it and want to add sounds - then do what has
already been said here in this thread and
use File > Import, then add it to the main timeline via
the properties panel. Or drag it from
Library to stage after Importing to library.
But this will be the last time I ask: what are you referring
to when you say "VIDEO"?
> Read what urami sais, She talks about a video editing
program for sound, how
> do i put sounds into my videos? and which video editing
program should i use?
>
> cheers,
>
> joe
>
>
Similar Messages
-
Dropbox - TV_AL_Q
I really need to reduce the lag happening in this project. I know practically nothing about action script except for what I've used in this project so please keep that in mind.
Im going to try and break apart the grouped art so its in its most basic form and see if that helps, and also change all my tweens to frame by frame since those two things helped me with an animation I did awhile back that was lagging severely.
But I was hoping someone with more knowledge could take a look and see if there is anything that they know of that I could do to help fix this. I'm working in Flash cs6 and using action script 3.
I have to turn this project in by this Friday (the 20th) so I would love to get this sorted by then but even if I can't I would still be interested in some possible solutions, just for learnings sake.
Thanks.Thank you for yet another cryptic reply, remember I'm the idiot here who doesn't understand this stuff so please can you explain things in a little more detail. Thanks.
I am using the JW Player setup assistant and it lists two types of code
The "Embed code" and the "swfobject 1.5 code" but not an Object/Embed code that you mention.
This is the code that the website is telling me to use.
<script type="text/javascript" src="/embed/swfobject.js"></script>
This text will be replaced
<script type="text/javascript">
var so = new SWFObject('/embed/player.swf','mpl','480','270','9');
so.addParam('allowscriptaccess','always');
so.addParam('allowfullscreen','true');
so.addParam('flashvars','&file=http://web.me.com/nathmac31/Flash/WaineWeddingHD. swf');
so.write('player');
</script>
My movie does play on through the player on the JW site, after about 30 seconds of waiting for the picture to appear. When I cut and paste the above code into my webpage, I don't get anything. I have dropped the "Player.swf" and "swfobject.js" files into the folder containing the contents of the page that I want the player to appear on.
Where is the exact best place to drop these files? -
Basically, the buttons are not visible when siteplan_mc is replayeed after floorplan closes, but they still work. Most things are only working on double click for soe reason, tho I have them to function on click. and the back button only woorks on unit 1 floorplan, tho the code it the same for all floorplans. I have a feeling it has something to do with levels... but I really have no idea... hopefully someone can help!
thanks in advance,
Sarah
http://www.30eastroosevelt.com/RRHA_SITE.flaThere are at least two things you're doing wrong. You can't go to a frame where something exists for the first time, and immediately do something to it. Like in your playunit functios for example:
gotoAndStop("unit1")
unit1_mc.alpha = 1
unit1_mc hasn't yet drawn itself on stage to have its alpha set, and so there's an error. That is something that was improved in Flash 10, so if you had set the Flash to publish for Flash 10 and not Flash 9, then the floor plans and the back buttons appears ok. It would sometimes work with double clicks because by the second time you clicked, the movieclip now existed. You might be able to do what you want by having all of the room units on frame 1 of the siteplan_mc, and then set their visible to true or false as you need them, instead of doing the gotoAndStop().
The other problem is that you're trying to set listeners on the Back buttons that don't yet exist. Wait until you're on the frame where the buttons exists, and then set its listener for the mouse click.
Other things you're doing could be improved too, but really you might want to get together with someone who has done more AS3, to help you become more familiar with how it works. -
I'm new to flash and need help with some controls
I'm builidng a site that has a portfiolio of work to display.
When the visitor arrives at the portfolio page he (or she) is
faced with a split panel. The right panel displays a summary of a
client and the work. The left panel displays the work examples
attributed to that client. By clicking forward and backward arrows
in the right panel, the visitor can call the summaries of the
different clients. Landing on a client page 'opens' a separate swf,
called using loader component, that contains the portfolio of that
client's work into the left panel
1. I want forward and backward arrows located on the main
movie in the left panel to control the progress of the loaded swf,
rather than using forward and backward arrows on the loaded swf.
2. I want to prevent the forward and backward arrows in both
panels from clicking beyond frames in the Portfolio area of the
timeline.
3. I want the backward arrow to be innactive on the first
frame, and the forward arrow to be innactive on the last frame.
I have no problems making the arrows work on the main movie
controlling the client summaries. What I don't know how to do is
make them control the movement of the loaded swf, or #2 and #3.
Any help will be greatefully appreciated. Thanks in advance,
Art"Art Lazaar" <[email protected]> wrote in
message news:[email protected]...
> Tralfaz,
>
> Thanks for your response. I must be missing something
very simple here, but I
> can't make this work no matter what I do. Let me see if
I understand some of it:
>
> On my main movie I put the fwd_btn and rew_butn
codes...do I put these on the
> actual buttons, or in an actions time line? When I put
them on the buttons, I
> get an error report saying they need to be in an 'on'
event handler. I thought
> that's what 'onRelease' was.
>
> On my loaded movie, I place the 'one.swf' code. I'm not
sure what you mean by
> placing the code inside a loop, I don't seem to be able
to find a reference to
> using 'loop' anywhere. When I use an 'onEnterFrame', I
presume I do that with
> onEventClip(enterFrame). When I do that, if I run the
'one.swf' by itself, i
> get an error report saying onEeventClip is for movies
only. But there's no
> error report when it loads from the main movie. What
happens tho' is it loops
> continuously, even if there are stops() in it.
>
> Boy, am I confused ;)
>
> I am really baffled by this seemingly simple little
task. Your help is
> gratefully appreciated.
>
> Art
>
>
>
Hi Art,
There are different coding methods, depending on where you
put code..
1) Frame code
Click on a frame of the timeline to enter frame code
2) Attached code for movieclips and buttons
Click once on a movieclip or a button then enter attached
code
To make an onEnterFrame event for a movieclip, first chose
either frame code or attached code method. I personally rarely ever
use
attached code because it hides code in places that can be
hard to find. Almost all my coding is frame code, but it's a
personal
choice.
Frame code method to make an onEnterFrame for the main
timeline..
// put this code into a frame on the main timeline
this.onEnterFrame = function()
// do something once per frame at the frame rate
checkMyButtons(); // once per frame we will check on the
button status
OR
Attached Code method to attach an onEnterFrame event to a
movieclip
// click once on the movieclip (don't dbl click it .. stay at
the root timeline level)
onClipEvent(enterFrame)
// do something once per frame at the frame rate
Those two types of code are not interchangeable. One type
must be entered into a frame and the other style must be attached
to a
movieclip or you will get errors.
Then there is the DOT syntax way to write frame code that is
equivalent to attaching code..
myMovieClip.onRelease = function()
trace("release");
myMovieClip.onPress = function()
trace("press");
myMovieClip.onDragOut = function()
trace("drag out");
tralfaz -
New to flash. Need help defining term for class.
My professor has given us the following definition:
What is the vegetable term within Flash that enables you to
view multiple frames at the same time?
Any ideas? Your help is much appreciated!Or you could always stop by google and, well, just type in:
flash view multiple frames
"Nickels55" <[email protected]> wrote in message
news:ejsjdg$fsa$[email protected]..
> hahahaha - unreal.
>
> Go ask one of your three classmates that already came
here last week
> asking the same question. Or better yet search for it
yourself. -
My screen freezes and popup message says I need to do a shutdown and then restart. It does it sometimes 2 times a day. Im new to apple and need help.
Bad or incompatible RAM is, more often then not, the cause of most Kernel Panics. It could also just need to be reset.
Here's the most used site for Resolving Kernel Panics. Please do all the steps in order, even if you don't think you need to do a certain step.
Here is a great MacFixIt article.
Good Luck!
DALE -
I am new to this but need help. Lion and iCloud have never worked on my desk top or MacBook Pro. Slow or Stop! Is there any way to fix the problem?
We need more information. I'm not sure what you mean by both Lion and iCloud have never worked.
-
Yesterday, my Flash CS3 AS2 remote debugging stopped working
after I installed a number of Adobe updates and on Mac OS X (Intel)
update. Before I installed the updates, I was able to debug any SWF
loaded in my browser window with the CS3 debug interface and output
window. After I rebooted, all of my browsers stopped sending my the
prompt to connect to a local host or enter an IP. Also, "debug" is
no longer an option in the drop down menu when I right click on the
swf in the browser window. Flash remote debugging is marked
properly in the FLA publish settings and a new SWD is being
published every time I test. But the player doesn't attempt to
connect at all! I don't know if the loss of this functionality is
related to the updates but it does seem that way.
Any help, please?!
Thanks,
StevenProblem solved. After the update, I needed to get the newest
version of the Adobe Debug Player for Intel Macs.
see what players you have here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
get the player specific to your OS here:
http://www.adobe.com/shockwave/download/alternates/#fp -
Flash Newbie needs help with Movie Clips/Action Scripting
Hi -
I'm having a problem with my movie clips playing
simultaneously and cannot, for the life of me, figure out what I
have done wrong. I'm new to flash, so I may have set something up
incorrectly, but here's what I have so far:
11 layers, total: 1 layer with 10 control buttons, each
button with the following actionscript:
on (release) {
gotoAndPlay(85);
Where the number changes in relation to which keyframe the
next movie is on.
I have 10 movies, total, but they are only movie clips,
essentially photo slide shows with audio, made all in the library.
The problem happens when I click on the second or third
button. Not only does the movie that I have selected begin to play,
but all of the previous clips do as well, so it all sounds quite
garbled. I don't know what I am missing in the action script, as my
Action Layer has a stop command on it at each keyframe where there
is a new clip to play.
I have tried to add a stopAllSounds command, but I'm afraid
that doesn't do anything because it is not a "sound file" per se,
playing in the timeline.
I'm at the end of my rope and really need some help in
figuring this one out. My project is hanging in the balance on
this, as I have scripted everything else correctly and it runs
beautifully.
Please help!
Thanks,
CarolineEach layer has a blank keyframe before and after each
movieclip. Each movie clip is at a different frame. Even with the
blank keyframes added, the second video starts to play and then the
first video begins to play. Same happens if I click on the third
button. Third plays, and starts 1st and 2nd shortly thereafter. Is
there an action script I can put in that will tell the timeline
that, when a button is clicked, no matter where the movieclip is,
it will stop and start the newly selected movieclip? -
Problem with changing flash content - Need help
I need help in changing the flash content. Here is my proble,
1) I bought a flash template (I will call this Original) from a website and paid some money to customize my menu,logo and background color.
2) After they finished it they sent me several files. Like 1) index.html, .swf, psd, .fla. In all the files .html,.swf (the video) and .psd I am seeing my customize changes (logo,menu and background color). But the .fla file they sent me is still shows everything from original template. It doesn't have my logo, menu or background color.
3) I asked their technical support and they walk me through. a) Open the .fla file in flash pro. b) Change the content c) Hit Ctrl+Enter and it will export the new .swf file to the flash folder. d) Make sure I delete the video from flash folder and replace the name with the one I created.
I did all these steps. But the problem is the .SWF that i generated is showing everything from the orignal template. It did change the content but I don't see any of my customize request. (Menu, logo or color)
4) Then I open the index.html and I DID NOT see any of the changes in the content.
My feeling is they did not provide me the correct .FLA file. I really need your help.
My confusion is a) Have they provide me the correct .FLA file or I am doing something wrong. b) When I generated the new .swf video and renamed it properly why it didn't reflect in the index.html file.
I am really going back and forth with them since last 15 days and its not going anywhere. I really appreciate any help.
Thanks,
JessyUnfortunately, if you have not enough knowledge about using Flash, and do not want to pay to have this done for you, the folks who did this for you are likely going to be the only ones who can help you resolve it. They should be able to provide the edited fla and the new swf if they are in any way a credible/reliable business.... which at this point sounds like they are not.
-
Help, new to Linux and need help installing 8i
I am new to Linux and some of this stuff..
Yet,I have gotten the JDK116_v5 installed and working on my box.
I have cut a cd for Oracle8i and need help..
I have also recopiled my kernal as well...
Does any one know where I can get help...
nullAl Pivonka (guest) wrote:
: I am new to Linux and some of this stuff..
: Yet,I have gotten the JDK116_v5 installed and working on
: my box.
: I have cut a cd for Oracle8i and need help..
: I have also recopiled my kernal as well...
: Does any one know where I can get help...
Try http://www.akadia.com/html/dod-frame.html for Redhat.
http://www.suse.de/~mha/oracle/ for SuSE
Also peruse these
http://www.akadia.com/html/dod-frame.html
http://jordan.fortwayne.com/oracle/
Colin.
null -
Setting Up New FCP5 HD Bay -- Need Help
I'm setting up an HD edit bay for a friend, and I have a number of questions. Any help would be a godsend.
Basically, he's got a G5 with Final Cut Studio installed, a Motu audio interface, a Mackie Mixer, a Decklink Pro HD dual link, M-audio LX4 5.1 speakers, and a DVD/VHS recorder. He has one 250G internal capture drive, and one external 1TB firewire G-Raid. He's running a 23" and 20" Cinema Displays, and a Panasonic 32" HD LCD Flatscreen.
He wants to rent decks per project for capture and output.
My questions is this, how do we output to SD VHS/DVD or other formats for clients? Do we need a Switcher? Is it possible to do format conversion in Final Cut and output via Firewire instead of decklink to SD devices?
Also, is SDI (serial digital interface) cross-platform from SD to HD? Kramer Electonics has an interesting format converter that supports SDI, but will that change HD to SD? Here is a model number and link. FC-7402
http://www.kramerelectronics.com/indexes/item.asp?pic=71
Kramer also has a firewire format converter that looks interesting. FC-20
http://www.kramerelectronics.com/indexes/item.asp?pic=430
One of the Mac Vendors suggested the Blackmagic Multibridge Extreme, which sounds perfect, but costs $2000 - 3000.
I'm looking for a low cost alternative, if possible.
I really need help from someone experienced with this. I'm a freelance editor who cuts offline mostly on Avid for episodic TV, but my friend master HD out of his Mac edit suite. This is new territory for me.
Thanks in advance.You should setup your local DNS to resolve only for the 'film.lab.' domain. Any requests that your local DNS will not be authoritative for should be forwarded to your district's DNS server. You should also set your local DNS to allow recursion only for clients on the 10.x.x.x subnet. The failure of clients configured to use your DNS for name resolution could be due to rules that have bee setup on your district's edge router to block outbound and inbound port 53 requests for all internal clients.
If you set your server and clients to use your district's DNS server as the secondary for your zone, you must make certain that any hostnames within your local zone are defined on your district's DNS to resolve to the private, 10.x.x.x, subnet that you will be running your systems on. If you don't -and your DNS goes down and there is no secondary defined on the clients that contains the zone info for your subnet- your clients won't be able to find any hosts. If you wish to run services that will be accessible from the Internet on your local server, this may require your network admins to make changes to routing to allow those request to be pass from the public network to the private one.
Also, if your district runs a central DHCP server you will need your district network admins to setup their DHCP server to return the correct client settings for your DNS and search domains for the clients within your subnet. If they do run a central DHCP server, do not attempt to set up a local one for your subnet. If you do, the probability that you will receive a very angry phone call from a not so happy fellow at your district is very high. -
My D420 is not working on my new Mac Mini I need help
I have a new Canon Printer D420 . I love the machine works great
the price was great. It worked good on my old Imac for a few weeks then
I bought a new Mac Mini and now I can't get it to work. I reloaded my
solfware taht came with it..... need help
thanks
Ray LandHi Ray Land,
We can help narrow down the cause. What operating system are you using on your new Mac Mini?
If you are running the Mountain Lion OS, you can download the latest driver here. An important note is that the current print queue must be deleted before installing the new driver. This will ensure proper communication.
If this doesn't work or you need further assistance, please contact us here.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
i'm quite a newbie when it comes to flash and need some help
http://www.sas.se/sv/?vst=true
you look to the right you'll see an airplane and i'll say "Billiga avgångar" next too it
under the text you can see text in yellow being scrambled then reappear
i was wondering how you make the text scramble then display the messeage like that?this is a better way to do it in one textfield. it's easily amended to display one letter per textfield and add textfields as needed.
(to speed up the display shorten charS even down to a one character string.)
var charS:String = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ 01232456789,./<>?;':\"[]{}\|!@#$%^&*()-_=+";
var charA:Array = charS.split("");
var displayTO:Number
// user defined params:
// character change in ms
var speed:Number = 1;
encodeF(yourstring,yourtextfield);
function encodeF(s:String,tf:TextField){
tf.text = charA[0];
displayTO = setTimeout(displayF,speed,s,tf,0,0);
function displayF(s:String,tf:TextField,charNum:Number,index:Number){
tf.text = tf.text.substr(0,-1)+charA[index];
if(s.charAt(charNum)==charA[index]){
tf.text += charA[index];
charNum++;
index=0;
if(charNum<s.length){
displayTO = setTimeout(displayF,speed,s,tf,charNum,index);
} else {
tf.text = tf.text.substr(0,-1);
} else {
index++;
if(index<charA.length){
displayTO = setTimeout(displayF,speed,s,tf,charNum,index);
} else {
charA.push(s.charAt(charNum));
displayTO = setTimeout(displayF,speed,s,tf,charNum,index); -
Flash Newbie, Need Help From Flash Masters Out There
Hi to all flash masters out there. Im new in flash
and I only learned it trough flash help. My problem is that if i
dont put a stop() on my first scene/layer1/frame1 my scene1 will
immediately switch to scene2 without pressing the button. And if i
put stop() to prevent scene1 from switching to scene2 without me
clicking a button, all of the tweening effects in scene1 will not
tween anymore.:( Please help, you can also email me at
[email protected]Hi saxah_jean
I am not a flash master but i think the problem can be solved
. Try putting a stop on the last frame of your 1st scene, put a
button on that that frame and give an action to jump to the next
scene, frame 1.
Abdul Aziz -
Publishing a flash movie, need help!
ok so i made several flash files and connected them with buttons with, behaviours [load external movie clip] but when i moved it to a cd the buttons dont work. I really need help!!! how do i keep them connected.
this is the script for one button please help me as soon as possible!
on (release) {
//load Movie Behavior
if(_root == Number(_root)){
loadMovieNum("F:\\ICT\\A2\\single\\FLash\\baa blacksheep1.swf",_root);
} else {
_root.loadMovie("F:\\ICT\\A2\\single\\FLash\\baa blacksheep1.swf");
//End Behavior
Maybe you are looking for
-
When I tried downloading v10.5 I hit 'Run' instead of 'Save' but it doesn't appear to have installed as I'm still getting the Windows warning: "The iphone "iPhone" cannot be used because it requires iTunes version 10.5 or later". I currently have ve
-
Noob needs help using/managing large font collection in os10
Hope this is the correct forum for this question. I'm a os10 noob starting at a new, small startup design-oriented biz (6-7 macs) that needs to manage fonts - 100s, over a 1000. Other places I've worked used Font Reserve and I'm familiar with that pr
-
Not able to access Network Shared Variable when deployed in PC
Initially, when we deploy a Network Published Shared Variable in PC and try to access the same (Read/Write) from RT, we get an error/warning "-1950679023". But when we access the same variable from the PC, it works fine. In the distributed system man
-
Hi all, I own an HP PSC 1410 All in one printer and it has been working fine until today, when i tried to turn on and it didn't work. The point is that once plugged into the current supply, the printer seems to be fine as there is the led that turns
-
Hi, which service is responsible for the approval proces in KM. Is there a portal component that can be customized? Thanks, Gert