New to Hierarchy use in Bex

Hi,
I am new to using hierarchy in BEX query.
I have built a hierarchy in BW7.0 where under the First Node, we have 3 nodes and then each of these 3 nodes, we have 4 nodes under like shown below;
Node1---
Node11
                      |----
Node111
                      |----
Node112     
                      |----
Node113
                      |----
Node114
Node12
                      |----
Node121
                      |----
Node122
                      |----
Node123
                      |----
Node124
Node13
                      |----
Node131
                      |----
Node132
                      |----
Node133
                      |----
Node134
My Client is intested to see KFs only for selected nodes which are Node1, Node11, Node114, Node13, Node133.
He is not interested in data of other nodes.  Is this possible to present the data in Bex query for Selected Nodes?
Also will this data for selected nodes be presented in hierarchical way?
thanks,
Su
Edited by: SuKaur on Feb 29, 2012 7:27 AM
Edited by: SuKaur on Feb 29, 2012 7:29 AM

Hi,
You can use variables for your scenario which you can create in Query Designer.
But if you select ROOT node then all the data from other nodes will also be available.
Regards,
Amit

Similar Messages

  • New specific hierarchy using table SETCLST, SETHEADER and SETNODE

    Hi expert,
    I want to know if they are any customizing point to configure a new specific hiearchy using standard table SETCLST, SETHEADER and SETNODE?
    Thanks for your help.
    Regards
    Jonathan
    Edited by: Jonathan on Aug 2, 2011 3:36 PM

    We have a specific request to implement a specific hierarchy with specific data. The table with the specific data exist but now our user want to create a hierarchy with it. I know SAP use this standard table to create hiearchy with standard data.
    My question is I want to know if they are any transaction to customise this tables to create the hiearchy?
    Thanks for your help

  • Using 2 BEx query structures - Not displaying as a hierarchy

    Gurus,
    I have CR2008, and I am using a BEx 7.0 query that has 2 structures.  One structure is key figures, the other is a layout that I turn on and display as a hierarchy.  There is cell definition behind the query.
    How can I get this second structure to view as a hierarchy in Crystal?  The cell definition is calculating correctly in Crystal, however all of the Profit Centers show on the same line, without indentation.
    If I create a Profit Center hierarchy in BW and bring it into Crystal, then I cannot use the cell definition, which is needed to calculate the correct results.
    Thanks in advance for responses.
    Scott Friery

    Help please!!  I really need some guidance for this problem?  Can I manually modify how the structure looks once I bring it into Crystal and drop into the "Details" section of the designer?
    The structure from the BEx query looks like this in Crystal:
    Global Sales
    Western Region Sales
    Location 1
    Location 2
    Location 3
    Eastern Region Sales
    Location 4
    Location 5
    Location 6
    I want the structure to look like this (and it does in the BEx 7.0 query designer)
    (No Indent) Global Sales
           (Indent 1 Space )Western Region Sales
              (Indent 2 spaces)  Location 1
              (Indent 2 Spaces) Location 2
              (Indent 2 Spaces) Location 3
           (Indent 1 Space) Eastern Region Sales
                (Indent 2 spaces) Location 4
                (Indent 2 spaces) Location 5
                (Indent 2 spaces) Location 6
    Any help is appreciated.
    Scott
    Edited by: Scott Friery on Feb 24, 2011 8:07 PM

  • Open a new session when using go to documents from bex analyzer.

    Dear experts,
    We are using the go to documents functionality in bex analyzer.
    we enter the workbooks with a SS0 link (RRMXP) through the portal ,
    our problem is that when we want to attach a  comment or document (we use go to documents)
    the browser uses a session which is already open.
    When the user enters his comment or document and closes the browser session he terminates the SSO.
    My question is where can I define that when using in bex workbooks right click go to documents it
    will always open a new browser (internet explorer) session and not use an already open session.
    Thanks for your help
    Amir

    TMega,
    The Go> menu commands apply to the current Finder window. It has always been this way, and it always will be. The answer, in this particular case, is to first open a new Finder window. This is easily and quickly done by pressing Command-N. You can add to this the use of Shift-Command-K to quickly open a new window, then move that window to the Network folder.
    So, the answer to your question is "Yes, you can always open a new window when accessing the Network folder," but you can't do it just the way you were thinking.
    Scott

  • ISetup new custom interface using BC4J/java class

    Hi,
    I am able to create new custom interface using the link :- How to setup an user to be Oracle iSetup Super user ? but I have not seen anything for BC4J filter set, as per oracle iSetup developer guide clearly explains step by step process how to create custom BC4J interface type, but they have not mention how to add filters, as per oracle developer guide we have to use 'iSetup Framework' for BC4J, if we select type as 'iSetup Framework' then we don't have option to add filter parameters.
    Any idea how to see existing  iSetup interface repository values, Search shows the result, but we can't go in details? any idea to see this?
    Oracle have good interface repository but most of them does not have option to filter, and  update so I want to customize them by adding new interfaces with filterable and update option
    Regards
    Anil

    First, be sure your properties file is in the root of the classpath.
    The Messages.properties or Messages_en.properties should be in the WEB-INF/classes/ directory of the war or as a root file of a jar included in the classpath (WEB-INF/lib).
    If it doesn't work, try adding a "/" before the file name. The classloader will try to find it as a root file of the classpath.
    For example:
              ResourceBundle messages = ResourceBundle.getBundle("/Messages", locale);
    If you are using sun appserver, the classloader hierarchy is configured by default from inside the war to outside, so it will search first in the WEB-INF/classes/Messages_en.properties and then it will search the file inside each jar file in WEB-INF/lib.
    If you want more information, check the classloader hierarchy of the appserver you are using.
    Hope it helps.

  • How to create new approval hierarchy

    Dear Experts, I want to know if we can create a new approval hierarchy.
    I know that there is a existing seeded hierarchy. We create new process and it goes for review and finally it gets approved. But this would happen according to roles assigned to the users and that to for only two steps one is the reviewer and other is the approver, but i want that there be 2 reviewer and 3 approver, than how can i assign any further roles for the same process to be to be reviewed and approved by more people.
    1) Can we create new approval hierarchy.if yes then how?
    2) what will be there roles assigned to them?
    3) if it can be done by rules , than what is the scripts for the same.?
    4) If it can be done with perspective hierarchy then how to confirgure and what roles to assign?
    Please help me with the above problem.
    Regards,
    Prince

    This can be done, but it will require work using Flow Rules and perhaps Form Rules. This is a complex setup you're looking for, and I would recommend seeking a professional implementer to assist you. People like Oracle Consulting for GRC is available and have had success in these type of setups.

  • Creating Text Variables to use in BEx Broadcaster

    Creating Text Variables to use in BEx Broadcaster OR How to Broadcast reports (Excel output format) and dynamically generate each Excel file name
    Hello,
    I'm new into posting to this forum, but I always come here when I need some answers and I find them almost everytime.
    But now I couldn't find a solution for my problem so I decided that maybe you can help me.
    I'm using BEx Broadcaster (I'm working on a SAP BW 7.0, SP17) to broadcast to SAP Portal some Excel files generated from a query.
    I use Filter Navigation, because the query provides me with information regarding Sales Orders from all my customers and I need to broadcast an Excel file per customer. This is working perfectly, meaning, with this query I put the Broadcaster generating an Excel file per Customer.
    The problem is that I needed that each Excel file had a different name on it.
    For example, for Customer1 the Excel file name should be something like Customer1_SalesOrder.xls, for Customer2 it should be Customer2_SalesOrder.xls and so on.
    At the present, the Broadcaster generates each Excel file using the technical name of the Query that originated the file. You can use some stardard text variables that broadcaster has available, but these standard text variables don't solve my problem. I needed to create my own Text Variables so I could have the Customer ID on the file name.
    Can someone give me a light on this?
    Points are obviously awarded.
    Thanks,
    Cristina

    Hi All,
    I have a similar requirement, where I publish my reports on to the SAP PORTAL  KM folders.
    In my broacast setting for the web templates, I have the fisrt tab called
    TARGET in PORTAL
    File Name : ReportXX MONTHLY_<MONTH_ID>  (F4) List
    Currently I use the sys variable <MONTH_ID> which gives me the curr month;
    My requirement is
    If the report is run in the first week of the month, I want to generate a filename_PREVIOUS MONTH (label) and
    if the report is run between 7th-30th of the month then to generate a filename_CURRENT MONTH (label)..
    On BI.7 POTAL is it possible using some exit variables instead of the system variable which are given in the F4 List.
    If so where do I create the exit variable in BW backend or the PORTAL itself so that I can access it from the F4list of of the filename column.
    Thanking you in advance for you time.
    Rao

  • I have a new iPad that uses the Cloud.  But my iMac, my MacBook Air, and my iPhone are all older.  How can I link my mail accounts that aren't on the cloud withntiPhone

    Does anyone know how to sync my email account which is on my iMac, my MacBook Air, and my iPhone with my new iPad that uses the Cloud.  none of my other Apple devices can use the cloud.   Please Help me use the same email account on my iPad!

    I have a MacBook Air, bought in 2010 or 2011.  It is running OS 10.6.8.
    I have an iMac that is the same age as my MacBook Air.  My iPhone is 2nd or 3rd generation.
    None can support "the Cloud".  I use gmail and my iPhone and both computers are all synced.
    I can't get email on my new iPad that does use "The Cloud".
    Please help.

  • How to trigger New page while using ALV with classes/oops?

    Hi All
    I am trying to print a report which has to show the data in two pages.
    I am using ALV with classes/oops.
    Though I am able to print the report but a new page is not coming. Whole of the data is coming in one single page.
    Please tell me as to how to trigger a NEW PAGE while using ALV with classes/oops.
    Please send some code samples also if available.
    Thanks in advance.
    Jerry

    using sort option you can do it. in case of grid/oo alv class ALV you can view that only in print mode/preview mode.
    in case of list you can view that directly.
    sort-fieldname = 'FIELDNAME'.
    sort-group = '*'  "triggers new page
    sort-up = 'X'.
    append sort to it_sort.

  • HT4053 can i set up my new iphone 5s using my ipad (because my work laptop wont allow me to installl itunes).?

    can i set up my new iphone 5s using my ipad (because my work laptop wont allow me to installl itunes).?

    No, but you do not need iTunes to setup a new iPhone 5s. Create an iCloud backup for anything you want to transfer to the new iPhone.

  • How do I connect an older imac to my new imac to use as a second monitor?

    Hi !
    I was wondering if it were possible to  connect an older imac to my new imac to use as a second monitor?
    My older imac is from 2006. The new one is a 2012 imac.
    Any advice would be appreciated.
    Thanks,
    JC

    http://support.apple.com/kb/PH4469
    Look this article over, the key is to connect either mini display port or thunderbolt and using CMD+F2, let me know if this helps or if it doesn't work out. I'll find another solution if this doesn't work Joel ^_^

  • Macbook pro fails to read sd card with movies recorded on it, any ideas? I can view them in the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it.

    My macbook pro is failing to read a new sd card with movies recorded on it. Any ideas please? A previously used SD card has downloaded without problems. I have tried using a card reader as well as downloading from the video camera itself, neither works.
    I can view the latest recordings on the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it but didn't think of that at the time. Obviously don't want to do this now as it will wipe the movies.

    Hi and Welcome to the Forums!
    From everything you've described, you've done everything possible. Hence, I recommend you seek out your warranty support.
    Good luck and let us know.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library.  However, when I plug in my iPod it says it is already synced with another iTunes Library.

    I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library.  However, when I plug in my iPod it says it is already synced with another iTunes Library. 
    I don't see anything in Help that shows when you already have transfered all the files over.  Why would it want to erase and sync when I already have all the music folder copied over?  I didn't have an issue when I had another technician copy from one laptop to another.  Home sharing is also on but not being recognized.

    I suspect you only migrated the media folder instead of the complete working library. Either review the transfer process and copy over the entire iTunes folder from your old profile's music folder or see Recovering your iTunes library from your iPod or iOS device.
    tt2

  • I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    Hi j2399123,
    It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
    Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
    For the QuickTime recording options, check out "Recording with QuickTime Player" in
    Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
    http://support.apple.com/kb/ht4024
    And for screen recording specifically, there's
    QuickTime Player 10.x: Record your computer’s screen
    http://support.apple.com/kb/PH5882
    Thank you for thinking of Apple Support Communities for your support needs.
    Nubz

  • Printer is overprinting old jobs on top of new jobs.  Using a Mac with OSx and a HP photosmart for over a year.  this just started happening.

    Printer is overprinting old jobs on top of new jobs.  Using a Mac with OSx and a HP photosmart for over a year.  this just started happening.

    RReset printing system again and the restart in Safe Mode . This will clear some caches,to do this hold down the Shift key when you hear the startup tone until a progress bar appears, after it has fully booted restart normally and add the printer.

Maybe you are looking for