New to infoview - report panel question

According to the InfoView User's Guide, I have one of these.
1 HTML Report Panel
2 Query-HTML
3 Java Report Panel
How can I determine which report panel I am looking at?
Bill

It is there in preferences > web intelligence.
Tell us what you see there and we tell you which one is what

Similar Messages

Can we add a new column in report which is not in table.

Hi All,
Can we create a new column in report which is not in table.
I have two columns in my table completion_date, manufacture_date. If the difference between the completion_date and manufacture_date is 0, -1, 1 then the new column of the report will say on time against each record or else will display late. Any suggestion how to proceed on this
Regards
Edited by: User_Apex on May 16, 2011 5:54 AM

Standard report then, NOT an interactive report (which if you were using, you could build a computation and report on that)..
Then the adding a column in the query would be your best best...
Thank you,
Tony Miller
Webster, TX
There are two kinds of pedestrians -- the quick and the dead.
If this question is answered, please mark the thread as closed and assign points where earned..

Cannot launch Java Report Panel

I would like to use the 'Advanced' Web Intelligence editor.
Unfortunately, when I attempt to edit a WI report, I get a message that reads 'This software has already been installed on your computer. Would you like to reinstall it?'
If I allow the installation, Java 6, Update 3 is downloaded and installed. I restart the browser. Attempting to edit the WI report generates the installation message.
If I don't allow the installation, I get an error that reads 'Cannot launch Java Report Panel, please make sure you have installed a Java virtual machine.'.
It never gets out of this installation loop.
At one point, the Advance editor worked, then something changed.
The Java Control Panel indicates that I have JRE versions 1.6.0_03 and 1.6.0._20 installed (in the Java Applet Runtime Settings). In addition, versions 1.4.2_04, 1.4.2_07, 1.4.2_12, and 1.6.0_03 are listed in the JNLP Runtime settings.
Any assistance is greatly appreciated.
Craig Buchanan

I am having the same problem and I don't see an answer here. I have uninstalled every instance of java and restarted my computer, then installed the one suggested here: Cannot launch Java Report Panel, please make sure you have installed a Java virtual machine. (the Java Virtual Machine was a link). Restarted again, tried again, same error. On the sun page, I tested my java installation and it works fine. I have checked that java is enabled in both IE and Firefox and I still get this error in either browser. I am using Windows XP.
Upon comparing my computer with my coworker's java configurations, we found that she has a certificate called "Business Objects America" and I don't have that. Could that be the problem, and if so, where can I get that certificate? There was no active X question as I would have expected to see asking to run active X or not. I can't find any certificate downloads on your site at all.
Please advise ASAP because I need to use this Web Intelligence Reporting and I cannot get in.
Thank you.

How to add new row in report

Hi,
I need to add a new record through report, I have a Add new button clicking on which report should add and editable row with textboxes to add new column values.
Please help. Thanks.

Hello User.
Please change your name from the default #'s to your name, or a nickname etc.
It makes things easier for everyone to communicate.
Can you please provide some more details of your problem?
Can you rewrite your question. I don't understand what your problem is...
Which version of Apex are you using?
Have you read and looked at the online instruction manuals?
Here's a link.
http://www.oracle.com/technology/products/database/application_express/index.html
http://download-west.oracle.com/docs/cd/B31036_01/doc/nav/portal_booklist.htm

WEBI 3.1 Java report panel customization

Hi All,
Can some one please point me to the file location (Where and which file) which holds the code to modify the Document Autosave and Recovery within WEBI - Java report panel?
We are in process of branding our infoview and would appreciate your help in locating this file.
(PS: Wanted to share the screen print of the window which we want to customize, however did not find a way to upload the screenshot. )
Cheers!

Hi Adam,
Thank you for your reply!
I am aware that the customization is not completely supported.
We do not want to change anything major, just the color of the window. Is there any other file apart from the war files which contain the code for making the color change?
Cheers!

Building Reports Using the Web Intelligence HTML Report Panel - URL

Is there a way to launch HTML report panel directly through a URL for creating webi reports..I know we can set the preference for HTML report panel in infoview...but thats not the requirement. I have to launch the HTML or Java report panel editor according to the User selection on the fly....its a customized java code for webi reports.
Any help on this is appreciated!
Thanks
Chenthil

hi
You have a better response chance if you post this in the BusinessObjects SDK forum.
check out this link for information on SDK.
https://www.sdn.sap.com/irj/boc/sdklibrary
This contains detailed information on the SDK calls
Asim

Problem with adding a new InfoProvider in Report Designer

Hey experts,
I have a problem to add a new Infoprovider in Report Designer. I get the following message:
Query consists variables. Please use a query view (variables are filled).
Can anyone tell me what the problem is.
Thanks in advance.
Best Regards
Ali

Hi Ali,
Note 931838 describes this issue.
Best regards,
Janine

How to create new Custom XML Report without using Form Builder

Hi,
What are the steps to create new Custom XML Report without using Report Builder ?
Thanks and Regards,
Abhi

Hi,
Steps we now follow
1)Create Data Model in Reports Builder
2)Create xml
3)Insert xml in Publisher to build Fomat
4)FTp rdf
5)Create Data Definition and Template
6)Create executable and Concurrent Program
Is there any way we can build reports without use of Report Builder ? By writing PL SQL Package for Before Report and After Report etc ...
Thanks and Regards,
Abhijit Rode

Cannot save Crystal report layout or view new layout of report

I am trying to make a change to a system crystal report (cust. recievables detailed aging). I had to make the date feild a little wider, so I edited the "system layout" that came with SAP (in my test DB of course), and I go to add-ins>sap business one>save. I get the following error "current user has no permissions for this operation". I am logged in as a superuser and full perm.
If I "save-as" and save it to a layout in sap....when I go to open the aging with my newly created layout it freezes and asks for DB logon info to connect to my server from crystal. I do not normally have to do this when I preview my reports in the out of the box layouts. WHat am I doing wrong? I am new to crystal.

The system will not allow me to export the system crystal report....it is grayed out, and it IS a crystal report. HOwever I can open it in crystal, then save it to my desktop, then from INSIDE of SAP in the report and layout manager I import the crystal report I made the changes to from my desktop into SAP and it saves and imports no problems. However when I go to view the report (and this is only the ones I import), it prompts me with the db login for our server to connect, and it is only with that report, once I enter sa credentials it is fine and shows up from there on in, but not if I log out of SAP and back in...then I have to put in my credentials again. Is this something having to do with the report when I make changes to it? I cant have users entering login info each time they run the new aging details report. Please advise what I may be doing wrong when I make changes to a crystal report. It was a very minor change....just moved a feild width.

New to oracle report builder

Dear all;
Please pardon me. I am new to oracle report builder and I am trying to accomplish the following. First and foremost please find my pl/sql queries below. Kindly note, all the queries have been tested and I just need to be able to input those queries into the report builder. Thank you.
create or replace package test1 is
type r_cursor is ref cursor;
function report(company_name in varchar2) return r_cursor;
end test1;
create or replace package body test1 is
function report(company_name in varchar2) return r_cursor as
my_r_cursor r_cursor;
begin
if(company_name = 'ALL COMPANIES') THEN
open my_r_cursor for
select t.t_id, t.t_description from t1 t;
return my_r_cursor;
elsif(company_name != 'ALL COMPANIES') THEN
open my_r_cursor for
select t.t_id, t.t_description from t1 t
where t.t_id = company_name;
return my_r_cursor;
end if;
end;
end test1;
create table t1
t_id varchar2(200) not null,
t_description varchar2(250),
primary key(t_id)
insert into t1
(t_id, t_description)
values
('CITI', 'PROFIT: 2.2Billion');
insert into t1
(t_id, t_description)
values
('GE', 'PROFIT: 1Billion');
insert into t1
(t_id, t_description)
values
('JPMORGAN','PROFIT: 0');Now, I am trying to create a simple report in oracle report builder. The interface for generating for this report is basically, there is a dropdownlist where by the user picks a company name from the dropdownlist and clicks on the go button, this should then generate a report with the above query shown in the package. How can this be achieved? All help will greatly be appreciated.

Hi,
first of all you need strong typed ref cursor, oracle reports need to detect witch are the columns returned by your cursor.
so first you create your package
create or replace package test1
as
TYPE t_record IS RECORD ( company_number PLS_INTEGER--TABLE_NAME.COLUMN_NAME%TYPE
, company_desc VARCHAR2(150)--TABLE_NAME.COLUMN_NAME%TYPE
TYPE T_REF_CURSOR IS REF CURSOR RETURN t_record;
procedure report(company_name in varchar2 ,cur_out OUT t_ref_cursor) ;
end test1;
show errors
create or replace package body test1
is
procedure report(company_name in varchar2 ,cur_out OUT t_ref_cursor)
is
my_r_cursor T_REF_CURSOR;
begin
if(company_name = '1')
THEN
open my_r_cursor for
select 1 as t_id, 'description' ast_description from dual
else
open my_r_cursor for
select 2 as t_id, 'description2' as t_description from dual
end if;
end;
end test1;
show errors
then, in your report you create a ref cursor query :
function QR_1RefCurDS
return test1.t_ref_cursor
is
C_return test1.t_ref_cursor;
begin
test1.report(1,C_return);
RETURN(C_return) ;
end;
hope this helps you !
E

Creation of new conditions in reports

hi,
plz tell me the steps in creating new conditions in reports.what is the difference b/n conditions and new conditions?
thanks ,
jack

Hi Jack,
You can formulate conditions in the query designer to make data analysis more efficient. In the results area of the query, the data is filtered according to the conditions so that only the part of the results area that you are interested in is displayed.
Procedure
Choose New Condition. (You can find this menu entry in the Query Designer toolbar under This graphic is explained in the accompanying text to the right of This graphic is explained in the accompanying text Condition). The Define Condition dialog box appears.
Specify a name for the condition in the Description field.
Note:If you only want to define the condition and not execute it actively in the query, remove the check from the active, which was set by default.
You now have the following options:
If the condition lines below are to be evaluated independent of one another for all of the characteristics in the drilldown and you want to use the same condition for multiple characteristics of the query, select Evaluate Conditions Below for All Characteristics in the Drilldown Independently.
You can choose from the following operators for threshold conditions:
   Is equal to
-         Is not equal to
-         Is less than
-         Is greater than
-         Is less than or equal to
-         Is greater than or equal to
-         Is between (is in the interval)
-         Is not between (is not in the interval)
These operators demand a floating point number as a value. For the operators is in interval and is not in interval, you must enter a value area, that is, a lower and an upper threshold value.
You can choose from the following operators for ranked list functions:
¡        Top N
¡        Bottom N
¡        Top percent
¡        Bottom percent
¡        Top sum
¡        Bottom sum
You can find additional information about using operators for range lists under Conditions.
http://help.sap.com/saphelp_erp2004/helpdata/en/43/b57138c1afbd20e10000009b38f889/frameset.htm
Regards
Hari

I am on a shared computer with several profiles. I had to delete my profile and create a new one. Now, my question. It transferred to Purchased Items to the new iTunes, so how do I get the rest of the songs to transfer to new iTunes?

I am on a shared computer with several profiles. I had to delete my profile and create a new one. Now, my question. It transferred to Purchased Items to the new iTunes, so how do I get the rest of the songs to transfer to new iTunes?

It sounds like you might have broken links to your content. Either repair these by putting the files you've recovered where iTunes expects to find them or delete the broken entries then go to iTunes Store > Purchased > Music > Not on This Computer, and click the download links.
If you have an Apple device see also Recover your iTunes library from your iPod or iOS device.
tt2

How to add new fields in report painter without library

Hi,.
I have to add new fields in report painter(std one) which is not in any library and so I am not able to add the fields in characteristics. Though I have added zfields in CCR1S but I am not able to add these fileds in characteristics in report painter(say - CJe3 t-code)
How to procedd for this.
Thanks,
MOhan

hi,
first i copied the report 12KST1G in my Y12KST1G with form. In CJE2 when i Click this report then in the whatever fields coming in the characteristics we can put it in 'variables' tab and these will be the fields which is displayed on the selecton screen. So after doing the wbove changes in the exit , I am not able to get the fields in characteristics vale so that I can put it in variable. or do we have to do some chnages in the screen for this z report which is like std. one.
FYI..The display of the fields was done in z-report with library but this is like a report without library and we did some chnages in the exit.
Pls Suggest

How to add new column in report painter

Hi Experts,
I want to add new column in report painter which as to calculate the previous column . value in the new column should be the precentage of previous column existing on left side...

HI Pradeep,
Goto the transaction code (Change Report) GR32.
Give you library name and report name
And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
How to enter formula: you can see the formula components in that id and description.
Id is columns that are present and description indicates explanation of that column.
Enter formula according your requirement.
Examples:
Enter formula screen:
ID : des
X001 amount
X002 pt000
X003 test
1. Enter formula as: ( X001 u2013 X002)
The above formula is for fist column u2013 second column.
2. ( ( X001 u2013 X002) / X003) * 100
First column u2013 second column and devide by third column after that multiple with 100.
Hope this will help you
Regards
Manohar

At New in OOABAP Report

Hi,
Could anyone post solution for the given below issue.
I have to handle control break command 'AT NEW' in ALV Reports using Global Classes(OOABAP), If possible with a small sample code which is more relative.

Read first this documentation [ALV Grid Control (BC-SRV-ALE)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf] and then elaborate a little more on your actual requirement.
Also perform some [search at sdn|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=%22atNEW%22OO+ALV&adv=false&sortby=cm_rnd_rankvalue#] and please don't post too many threads.
Regards

New to infoview - report panel question

Similar Messages

Maybe you are looking for