New to Iweb and have some questions

Hello,
I am attempting to build a website for the first time using Iweb 3.0.2. The first 3 pages of the site were built and uploaded using Iweb. There were some issues that my father-in-law corrected using a html editor on his PC. After making the changes he then uploaded the changes to the site. I am trying to now figure out if there is a way to download the current website back to my Iweb so I can continue to build the website.

No, you can't import the published pages back into iWeb.
Each time you republish with iWeb it will over write the changes your father-in-law made to the code.
You could make a copy of the published code with a free program such as TextWrangler and paste the code you want retained back in to the particular html page after you republish with iWeb. However, this ends up very time consuming, it would be better to get it right in iWeb so that you don't spend so much time with post publishing edits.
David

Similar Messages

  • HT4623 Trying to transition from my old iPhone 3G to a new iPhone 4S, and have some trouble getting all my photos transferred. Apps and music are okay, but can't get about 2/3 of my photos. Any suggestions?

    Trying to transition from my old iPhone 3G to a new iPhone 4S, and have some problems getting all my photos/videos to transfer. Apps and music are fine, but can't get about 2/3 of my photos. Any suggestions?

    Good afternoon
    Are you getting any error messages? This might be helpful reading.
    http://support.apple.com/kb/TS3697
    Cheers

  • I am trying out Keynote and have some questions.

    I loaded Keynote this afternoon on the 30day trial. I am a retired commercial artist and have been using a Mac since the Mac II came out with a color screen. A 20 MB hard drive and I think it ran at a blazing 8 MHz or something like that. I have worked with teenagers in churches for over 45 years. I took the job as youth leader in a small mission church about 3 months ago. On a good day will have 7 kids. However, we are growing and hope to have many more.
    Here is what I am trying to do. I have a new 17" MBP and I have bought a 32" TV for my classroom. You can see a picture at this link:
    http://www.waskomtexas.com/NCBC/youth/index.html
    I have had the system in the classroom for about two weeks, the kids are responding to it very well. My goal is to teach, not dazzle them with technology. Most of them know more about technology than I do anyway. I am using DreamWeaver to prepare some of the lessons. This is a total experiment. The first lesson that I have prepared is here:
    http://www.waskomtexas.com/NCBC/youth/Biblestudies/baptistbelieve/godhead/godhead.html
    My first question is the default size is 800 x 600, but I want to use 1280 x 720. When I change the size nothing seems to happen. Also the themes all seem to be for 800 x 600. Can I make the bigger?

    Ok, I thing that I can hit command "Q" to make it stop.
    But here is another question: I have a movie that is 230 seconds. It will be on the first slide of the presentation. This is what I want to happen:
    • The movie starts when I click and plays for 230 seconds.
    • Line of copy #1 appears at 220 seconds.
    • Line of copy #2 appears at 230 seconds.
    • The movie and both lines of copy dissolve at next click.
    • Line #3 of copy appears when these dissolve.
    • A click takes my to the second slide.

  • Hello everyone. I'm a newbie here and have some questions.

    Hi my name is Gary and I am a newbie to Flash player and what it is I can do and not do with it. Actually, I have some time on my hands since I got layed off and I haven't a clue what I am doing and could use some help getting started.
    My OS is Windows XP Home SP3, 32 bit I believe.
    Internet Explorer 8 version 8.0.6001.18702 not sure what bit version but I'm thinking 32 but.
    Not exactly sure what else I would need to tell you info wise, so please feel free to ask and how I can find this info out.
    My main questions are, am I able, is it possible or even allowed to download .FLV files to my hard drive and how do I do it to view at a later time? I can go into details at a later time.
    I have read a lot of info and have even downloaded a few .exe files, like FLASH SAVING PLUG-IN for IE8, thinking I was going in the right direction but seems to me nothing is working like I thought it would. I have the button on my toolbar but when I try to save a file things just disapper and I don't know why.
    Please HELP!
    Thanks in advance,
    Z28Gary 

    Hi Guys...are these not answerable questions or is the right person to help me not seeing my post yet? Just curious.
    I have been up most of the night reading many, many post but haven't yet stumbled on anything that can help with my questions.
    How about if I start with this question.
    Can anyone recommend a program I can download to download .flv and .swf files to my hard drive?
    Thanks

  • New hard drive and have a question about photo stream.

    My hard drive recently crashed.  I have a new hard drive and am trying to organize my iphoto again.  There are 1,000 photos on my iphone (photo stream) how do I get these onto my mac?  My mac only has the last 30 days.  Do I have to save each individual photos to the camera roll?

    G9daniel wrote:
    Is there a way to get user settings returned to what they were before?
    Not unless you have a Time Machine backup of your system.
    If you kdo you can just boot from the SL install disc and use that yo restore your system to the new HDD.

  • Upgrading from Final Cut Express and have some questions

    Hi All,
    I just ordered Final Cut Studio, but I am working on a project in FCE right now and I'm wondering if I can just continue it with FCP, or would there be problems with that? I'm too advanced on the video part to just redo it, but I have barely started on the audio part so that one I could start over.
    Also, I'm hoping the software will come with a printed manual, but I'm not holding my breath since the price has recently gone down... in that case, is there a good book on Final Cut Studio that explains how to use the different elements?
    Thanks in advance for any hints.
    Florence

    I MAY HAVE BEEN TOO HASTY IN MY DISMISSAL OF THE FCP 7 "BOOKLET"!
    Last night I had another look at the FCP 7 booklet and have come to the conclusion it is not as useless as I at first thought.
    True, it is very basic and only deals with FCP7 BUT it is surprising how many of the "basics" I have forgotten or never knew.
    After 5 years with the app and having developed my own techniques and (bad) habits, I tend to think I know more about the app than I actually do!
    The booklet is really a mini-tutorial and comes with a very small amount of media you can work with, including a small section on sound editing, which you may or may not already know.
    As mentioned above, it only covers FCP 7, but (depending on your existing level of expertise) I think you may find it a useful read on your train journey to work.
    The booklet, "FCP 7 . . . . . Exploring Final Cut Pro", together with sample video files, can also be downloaded as a PDF from here:-
    http://documentation.apple.com/en/finalcutpro/
    Comprehensive PDF manuals for all the apps can be downloaded as well.
    Message was edited by: Ian R. Brown

  • New to Editing and Have Some Important Questions

    Greetings All,
    I would consider myself a new editor - only because I feel I have so much to learn. Currently I edit for a local television show that broadcast on a cable network - I have been using makeshift solutions to get the job done - but would like to move into being a total professional.
    Currently I have - Final Cut Studio 2 (will be upgrading to the new release in approx. 2 weeks) - 8 Core Mac Pro (upgraded video card & and extra ram)
    - 23 inch Display (will purchase an additional 30" HD Display in approx. 2 weeks) -Mac Book Pro
    -Adobe After Effects
    I know that I need some sort of deck that can be used to put the tapes in and log and capture into final cut pro - (currently I rec. the footage on dvd and use MPEG to import the footage into Final Cut) - any recommendations on the type of deck I should get - something affordable that is universal that can be used with many types of tapes. Also I have been told that I may need a broadcast monitor - I've also been told that if I get the 30" HD display that I won't need a broadcast monitor- thoughts on this please? As a side not I have a 32 inch 720p flat screen Samsung television could this be used as a monitor? I've heard some discussion about Konika video capture card - after researching I'm still not sure I understand exactly what it's purpose is? Please help - is this something that I will need? What am I missing in my workflow? Any suggestions or advice would be appreciated - thanks

    only because I feel I have so much to learn<</div>
    Including where to post. This here's the LiveType forum.
    You don't need one deck, you need a deck specific to every kind of tape you have to use. You probably only need a DVCAM deck. If you need Beta you already know that. If you don't know that, you need to start with a basic video production class at a college or high school. That's not a service we provide here in these forums.
    The 30" Apple Cinema is way more screen than you need for FCP. Save your money and just get another 23".
    Konica does not make capture cards. You may be thinking of Kona, easily researched.
    You may or may not need a broadcast monitor. What you need is the firm knowledge and experience to make that decision on your own.
    My suggestion is to look up a video expert in your market area and prepare your management to pay them for their expertise as a consultant. Your post indicates you have way too much to learn. You can do it in books and in many hours of online research but you're going to spend more time and money doing that than you would simply by hiring someone to do the easy parts for you.
    bogiesan

  • I am going to buy a new external hard drive and have some questions first

    Although I asked this question several years ago, I would like to ask it again, just if in case technology in general or external hard drives in particular have changed in any significant ways.
    I need to replace a 1 terabyte LaCie external hard drive that died on me after a few years.
    1. I am afraid of buying another LaCie. What other brands are reliable? I heard that Western Digital is. Also another brand beginnibg with S (so helpful, I know).
    2. Do I have to look for a drive that is MAC FORMATTED? I vaguely recall this term from years ago. I also remember another term that I was to look out for, but I don't remember what it was. Something like ”chronicled“ but obviously not that.
    3. Should I get more than 1 terabyte? Right now I have an old, old 125 gigabyte LaCie that still lives, but it is so small that it is almost nothing
    4. What do you think about buying external hard drives fron Costco as opposed to from the Apple Store?
    ~L

    Ziatron, you wrote ”All you do is open the enclosure and the hard drive plugs in. (done.)“ What enclosure?
    This is the enclosure I like, it needs a hard drive to work : http://www.cooldrives.com/ox93saiihadr.html
    But there are many others.
    looking at my two dead laCie ext. hard drives and they don't have ”enclosures.“ Just holes in the back to receive the cables.
    A hard drive enclosure is a box or case the actual hard drive goes into. Look at the images in the link above. You can see what is inside.
    This hard drive goes inside the above cool drive enclosure: http://www.amazon.com/Western-Digital-Intellipower-Desktop-WD20EADS/dp/B001RB1TI S/ref=sr11?ie=UTF8&s=electronics&qid=1258862242&sr=8-1
    You recommended getting a hard drive with a Firewire connection, but most of the hard drives have USB.
    Well maybe, the better drives are Firewire.
    Should that matter to me?
    Yes, Firewire is "isochronous", basically meaning that you can pump "clocked" data though it in real time. USB works more like TCPIP, with the data chopped up into packets and later reassembled. (Thus, at a minimum, you have latency, that is, the wait for the data to be "put back together".) Second, the Firewire protocol allows more direct address to memory (including mass storage) with minimal intervention of the CPU.
    Is USB a whole lot slower than Firewire if I am transferring materials?
    Firewire is faster and _more reliable._
    Take a look at the link below, "Build Your Own External Hard Drive". The enclosure I like is easier to use.
    http://www.harmony-central.com/articles/tips/hard_drive/
    http://macs.about.com/od/diyguidesprojects/ss/externalhdcase.htm
    Also you need a Mac Pro to use eSATA, with a iMac use the Firewire port.

  • Switching out HD and have some questions

    I Have two different issues here.
    I am installing a 500Gb Seagate in my G5 which currently has a 160 Gb and a 200Gb in the two bays.
    The system is running on the 160Gb HD with a clone on the 200Gb.
    I have an external LaCie D2 500 Gb HD which I intend on using as my backup for the G5.
    I have a G4 TiBook running 10.3.9 with a 120 Gb HD.
    I intend on cloning its HD to the remaining HD in my G5.
    My logistical issue is in cloning, which I have done numerous times, but not with this setup.
    As I bought this tower with Leopard installed, I have no system disc.
    This is my theory and I ask to know where the holes are as well as any tips to accomplish this.
    Can I connect my TiBook running 10.3.9 through FW and boot my 10.5 G5 in Target Mode then use Superduper on G4 to clone from G5 system HD disc to the new drive?
    Another issue is cloning the TiBook HD to the 2nd bay drive.
    Should the Tibook fail, (I do have system disc for this one) would I just to Target mode on it and copy the clone?
    I hope I was clear and appreciate any comments.
    Thanks!

    Ok, I thing that I can hit command "Q" to make it stop.
    But here is another question: I have a movie that is 230 seconds. It will be on the first slide of the presentation. This is what I want to happen:
    • The movie starts when I click and plays for 230 seconds.
    • Line of copy #1 appears at 220 seconds.
    • Line of copy #2 appears at 230 seconds.
    • The movie and both lines of copy dissolve at next click.
    • Line #3 of copy appears when these dissolve.
    • A click takes my to the second slide.

  • I'm going to Europe in a week and have some questions about charging my computer.

    I'm going to Europe in a week. I know there is a built in power thing or something but do I have to change a setting on my computer or will it adjust automatically? And what kind of converter do I need to charge it/plug it in? Will the same one work for Prague, Paris, and London? I've tried doing some research but I just don't understand what I'm reading about different v and what kind to get. I found several adaptor things at the store but have no idea what does what or which one I need.
    Also, how do I charge my ipod? Can the same charger work or do I need a separate one?
    Thanks!
    -Sarah

    laundry bleach wrote:
    The World Traveller Kit is way overkill for this. All you really need is a plug adapter for the area you are going - most of Europe uses the same plug shape. You can get a plug adapter at most hardware or electronics stores for a few dollars. I travelled to Holland, Norway and Israel last year and used such a plug adapter with my MacBook Pro.
    Best of luck.
    Sure, but the USB adapter is not universal. So when he buy the adapter for $29 from Apple, and $5 for the adapter you can buy the travler kit for just $5 more and get a) more adapters b) the USB cable c) the adapters could be attached directly to the supper supply's. But sure, you can get a simple adapter like that one.

  • Hi, I'm considering acquiring CC for Teams for my org and have some questions:

    1. Is it basically a network/floating license? does it provide concurrent use (not named-user)? If not, what is the difference?
    2. Does creative cloud for teams allow max concurrent use?  is there a limit on number of users who participate other than the number of seats I buy?
    Thanks

    Team license links that may help
    -http://www.adobe.com/creativecloud/buy/business.html
    -team plans https://creative.adobe.com/plans?plan=team
    -manage your team account http://forums.adobe.com/thread/1460939?tstart=0

  • Clean installing Lion- have some questions.

    I'm gonna clean install Lion on my macbook pro and have some questions regarding the same...
    should I update to 10.7.2 and then clean install or will i have to update again anyway after a clean install?
    is it true that downloading mac app store apps again from the app's page reincurrs the charges?
    any best/worst practices i should consider while reinstalling Lion? I'm gonna perform a clean install.
    most important... how do i initiate a clean install?!
    Thanks for your time, in advance.
    Neerav

    Thank you, that definitely suggests that it isn't actually doing anything useful!
    I switched it off, cleared the PRAM and re-formatted the drive unencrypted (I found the option, it was in the dropdown for filesystem).
    That appears to have been the issue, as the download and install immediately identified the disc name, which it wasn't doing before. Guess it was having an issue with my encrypted drive. I guess it's handy I'm not a secret agent or an political dissident I shall run unencrypted...

  • Hello. I have some questions. I use Adobe CC and when it comes to photoshop, it's so slow and often

    Hello. I have some questions. I use Adobe CC and when it comes to photoshop, it's so slow and often cannot open files(or create a new one)..what am I supposed to do?! Really don't know what to do..I'll wait for your reply

    Amazon allows for at least so far when I have an issue like mentioned above a re-download.
    Yes it does.  So does the iTunes Store:
    Download past purchases from iTunes in the Cloud - Apple Support

  • I'm looking to buy a new Macbook Pro, and have questions about the Applecare extended warranty?

    I'm looking to buy a new Macbook Pro, and have questions about the Applecare extended warranty? I want to know if the 3 year extended warranty covers what damage. Like water damage, accidental damage, lost or stolen macbook, manufactory defects, or any other kind of damage, maybe be even cosmetic damage. Can anyone help me?

    If you are talking about features of the MBP itself, as long as you are not looking at  the Retina models, then the memory you can upgrade yourself for a lot less than Apple charges, and that does not affect the warranty as Apple considers memory a user permitted upgrade.  Great sources are Crucial and OWC, both are Mac specialists and have on-line videos on how to do the install.
    If the 15" is what you are looking at, a good upgrade is the 7200 rpm hard drive, gives a little better performance over the standard 5400 rpm drive.
    The Hi Res screen is good if you do a lot of graphics work.
    Comparing the 13" amd 15" you will notice the 15" has a second, discrete graphic processor...helps when you get into heavy duty videos, games, graphics...but keep in mind that kicking in the second processor uses a lot of power and will run the battery down faster.
    If you are looking at the Retina models, then keep in mind there are no post-purchase upgrade options...you have to buy with everything you want at the start.
    Just some thoughts.

  • I'm new to Apple and have a new Ipad.  I can't view some images because I need a flash plugin like addobe.  What App do I need?

    I'm new to Apple and have a new Ipad2.  I cann't view images that need a flash plug in like Addobe.  What app do I need?
    D

    Flash is not supported on the iPad, and probably never will be as Apple don't want it, and Adobe have never managed to create a version of their flash player that works on iOS devices - and Adobe have recently announced that they are stopping development on all mobile versions of it.
    Browser apps such as Skyfire, iSwifter Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, and there is the built-in YouTube app.

Maybe you are looking for

  • LR4 error when reading from its preview cache, needs to quit

    I'm getting the above message.  Lightroom says it will attempt to fix this problem the next time it launches, requiring me to click OK and the program closes.  When I relaunch it, I see the same message. I'm on a PC w/ Win7; I updated LR4 with the 4.

  • How to get Alerts mail for adapter engine errors in SAP PI 7.0

    Hi Friends, I configured Alerts in PI 7.0. with the help of t-code u2018ALRTCATDEF and created a new alert catergory. In container tab i have mentioned all give below elements. SXMS_MSG_GUID, SXMS_RULE_NAME, SXMS_ERROR_CAT, SXMS_ERROR_CODE, SXMS_FROM

  • Printing polish characters on form

    I added some polish text in a standard textfield. For example: Ilość Numer zamówienia zakupu Podpis wystawiającego fakturę This polish text is perfectly visible on Adobe Forms design view. But during runtime, the polish characters are not visible any

  • Logic Quitting

    I was wondering if anybody could tell me what may be causing logic to quit. I'm using about 52 tracks on a session. Using plug ins like Battery 2 (2), stylus (2), Symphonic strings, Ivory Piano, virtual Guitar.....etc. I tried to add the brass versio

  • OAMCM upgrade to 10.1.4.2.0

    Hi all, Can any one please tell me the patch number for Oracle Access Manager Configuration Manager to upgrade from 10.1.4.0.1 to 10.1.4.2.0. I coundn't found any where in metalink also. Thanks in advance. Siva Pokuri.