New to JDeveloper10g

I am from the Visual Studio side of the tracks venturing into Java land. While JDev10g is impressive, the tutorials are a bit of a mess. In most cases, menu options simply dont exist or are differently named. I have also wasted loads of time running through tutorials that just crash when I get to compile time. I redo the tutorial and get the same result. The OTN web site is also littered with references to 10g that is actually 9i. Courses mention to 10g and when you drill down its 9i stuff. Perhaps this tools was launched a bit prematurely ?

Gregory,
Which version of JDeveloper are you using? (check the help->about menu option).
The JDeveloper page on OTN refers to version 9.0.5.* as 10g.
Previous versions are refered to as Oracle9i JDeveloper.
If you are finding missmatches between the tutorials and your JDeveloper version it means that you are probably using an old version of JDeveloper.
Get the lates JDeveloper (9.0.5.2) from the JDeveloper home page
http://www.oracle.com/technology/products/jdev
and let us know of any specific URLs where you see problems with the tutorials.

Similar Messages

Error while deloying webservice on Weblogic92 using Jdeveloper10g

I am new to Jdeveloper10g.
I have created a small webservice using oracle Jdeveloper 10.1.3.3. This WS is up and running while it is being deployed on default OC4J application server.
Now I am trying to deploy the same on Weblogic9.2. For that I have created the weblogic.xml. Updated the webservice.deploy file and changed the platform to weblogic9x.
This is the following error what I am getting when I try to deploy the service -
java.lang.IllegalStateException: could not find schema type named {{http}//www.abc.com/ebs/logistics/v1}>QueryLogisticsOrderResponseEBM
     at weblogic.wsee.bind.runtime.internal.AnonymousTypeFinder$GlobalTypeNode.getSchemaType(AnonymousTypeFinder.java:182)
     at weblogic.wsee.bind.runtime.internal.AnonymousTypeFinder.getTypeNamed(AnonymousTypeFinder.java:87)
     at weblogic.wsee.bind.runtime.internal.Deploytime109MappingHelper.createBindingTypeFrom(Deploytime109MappingHelper.java:1045)
     at weblogic.wsee.bind.runtime.internal.Deploytime109MappingHelper.processTypeMappings(Deploytime109MappingHelper.java:476)
     at weblogic.wsee.bind.runtime.internal.Deploytime109MappingHelper.initBindingFileFrom109dd(Deploytime109MappingHelper.java:249)
     at weblogic.wsee.bind.runtime.internal.Deploytime109MappingHelper.<init>(Deploytime109MappingHelper.java:161)
     at weblogic.wsee.bind.runtime.internal.RuntimeBindingsBuilderImpl.createRuntimeBindings(RuntimeBindingsBuilderImpl.java:86)
     at weblogic.wsee.ws.WsBuilder.createRuntimeBindingProvider(WsBuilder.java:379)
     at weblogic.wsee.ws.WsBuilder.buildService(WsBuilder.java:135)
     at weblogic.wsee.ws.WsFactory.createServerService(WsFactory.java:55)
     at weblogic.wsee.server.servlet.WebappWSServlet.initRuntime(WebappWSServlet.java:67)
     at weblogic.wsee.server.servlet.WebappWSServlet.initImpl(WebappWSServlet.java:32)
     at weblogic.wsee.server.servlet.BaseWSServlet.init(BaseWSServlet.java:61)
     at javax.servlet.GenericServlet.init(GenericServlet.java:256)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:274)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
I am clueless what needs to be done. Could you please help me solving this?
Thanks in advance.
Aditya

You mentioned you checked that the webservice is configured under correct application pool. you can find the user under which the application pool is configured (open iis- > select application pools -> find out the "Identity column" to
know the user for your application pool.
-The user under which application pool is running have the read/write permission on the %temp% folder.-Dont Know how to check
Go to run -> type "%temp%" -> Go one step back -> Right click to the folder -> Properties -> Security -> check the application pool user is present under "Group or user names"
-In IIS,Check the identity of the application pool on which Web service is running and make sure that the user is the member of both “IIS_WPG” and “BizTalk Isolated host users”.
-DONT Know how to check
Refer How to Add Service Account to the IIS_WPG Group to add your application pool user under IIS_WPG. Also similar activity to add your service account to "BizTalk Isolated
host users" if it is local groups. Or Ask your network support team if "BizTalk Isolated host users" is domain group.
Please Help me in guiding me in the last two points
and if there are any other solutions for this..
Thanks,
Sarva.
Your event viewer might have more information pointing exactly what is causing "Internal SOAP processing failure".
Also refer this
which might be helpful for you.
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks !

About Jdeveloper10g new feaure with Jhs9.0.5.1 compatibility

In Jdeveloper10g have new feaure about Visual Editor, that will allows developer to work in both visual and code views separately or simultaneously. But I try this feature in Jhs9.0.5.1 with BC4J/Struts solution, the JSP seems did not have this feaure ?
and about disable the Struts technology awareness of JDeveloper 10g, whether cause disable "Visual development of application page flow using Apache Struts" , the page flow visualize is whether still support in Jheadstart9.0.5.1 environment ?

Ting Rung Dai,
About using the JSP Visual Editor:
I have used the JSP Visual Editor myself with Jhs9.0.5.1, it works fine. One reason I can think of why it might not work in your case, is that you have JSP's that were generated with an earlier version of JHeadstart. Older versions of JHeadstart generated JSP's that started with a line like this:
<?xml version = '1.0' encoding = 'ISO-8859-1'?>
This line prevents the JSP Visual Editor from rendering correctly. You can remove that line without changing the functionality of the JSP, and then the JSP Visual Editor should work again.
About the disabling of Struts technology awareness:
unfortunately, this disables the page flow visualization as well. As soon as JDeveloper bug 3607211 is fixed (causes CPU to hang when some types of struts-config.xml files are opened), the Struts technology awareness can be enabled again. You could also take the risk and try if your particular struts-config.xml file does not run into this bug, but if it does, you will have to forcefully end the JDeveloper session.
Until then, you can still use the other new features in JDeveloper 10g like the Visual JSP Editor, the much enhanced Java coding support, etc.
Hope this helps,
Sandra Muller
JHeadstart Team

Have ADF Business Components replaced BC4J in Jdeveloper10g?

I haven't found BC4J in Jdeveloper10g. Will it be replaced for ADF framework? Anyone, help me please.

Try following steps
(1) Create a new application workspace of type
Web Application [default]
(2) Create a bc4j project for dept - emp.
(3) In the ViewController project, create a Struts PageFlow diagram.
(4) Drag and drop a page forward onto your diagram (findExecute), and double-click to edit findExecute.jsp.
(5) In the data control palette, select DeptView1 and drop it onto the page as an Input Form with Navigation.
(6) In the data control palette, navigate to
DeptView1 > Operations and drop each of the following operations onto the page (inside the form) as a Button:
* Find
* Execute
* Create
* Delete
(7) Delete the Submit button from the page.
(8) Select DeptView1, and drop it onto the page (inside the form) as a Table.
Running the Scenario
1. Run /findExecuteDataAction.
2. Click Find to switch to find mode.
3. Enter a query criteria: for example, enter ">10" in the Deptno field.
4. Click Create to add your criteria to the table.
5. Click Execute to execute the query and switch out of find mode. Note that the table contains the list of records retrieved by the search.
6. Click Find to switch back to find mode.
7. Click Delete to delete your query criteria.
8. Enter query criteria for more than one attribute; for example, >10 for the dept number, and BOSTON for the location. Click Create to add your criteria to the search string, then Execute to run your query. The query strings are ANDed together.
9. Switch back to find mode, and try entering more than one row of query criteria (enter some values, click Create, enter some more values, click Create again). The query strings are ORed together.
raghu
JDev Team

Pls provide metalink URL for Jdeveloper10g with OAExtension

Hi All,
Today, I attended a demo of Oracle University on "Oracle Applications R12 Technology" . In the demo, it has been mentioned that Oracle web pages personalization/customization/extension is done using "JDeveloper10g with OA Extn" and the tool can be downloaded from Oracle Metalink.
But I made a rigorous(i think so) search for downloading "JDeveloper10g with OA Extn" but unable to find it.
Could anyone help me out by providing the metalink URLs for JDeveloper10g with OA Extn which works with R12 of Oracle E-Business Suite.
Thanks a ton in advance.
~Sivakumar.M.R.

Hi Siva,
Refer this link to get correct version of OA Framework.
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=416708.1
If your new to OA Framework, then the following link might be helpful for you.
http://prasanna-adf.blogspot.com/2008/11/new-to-oaf.html
--Prasanna

New DVR Issues (First Run, Channel Switching, etc.)

I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.

I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

New Phone

My husband used my iCloud account before I had an iPhone. Now that I have one, I am still finding information from when my husband used the account. I try to backup my iCloud account and it says I do not have enough space, but I know I still 3.9GB left. I log on to the iCloud website and I can not find any record of my phone or my husband's phone on the iCloud website. I want to clear everything he had on the phone prior to me using it starting in December. Is there a way to do that?

Done properly, you won't lose anything. You would not be able to migrate your existing iCloud email account to the new account, but you could still use it for email as a secondary account on your phone if you want to.
You would need a new Apple ID to create the new account, which requires a verifiable email account to set up. You can easily get a free Gmail address for this purpose. You can create a new Apple ID by going here.
To migrate your data to a new account, you start by saving any photo stream photos that you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. This is necessary because photo stream photos cannot be moved to another account and will be deleted from your phone when you delete the existing account.
If you are syncing notes with iCloud that you want to keep, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Notes is the other data set that cannot be migrated to a new account, and therefore must be recreated.
Then go to Settings>iCloud, tap Delete Account, provide the password to turn off Find My iPhone and choose Keep on My iDevice when prompted. Then sign back in with a different Apple ID to create your new account and choose Merge to upload your data. When you turn on Mail you will be asked to choose a new iCloud email account if you want to use iCloud for email. If you want to continue to use the email account from your current iCloud account, you can add it to your phone by going to Settings>Mail,Contacts,Calendars>Add Account>iCloud, signing in with your existing iCloud account ID and turning Mail on.
Ringtones and Music are not effected by this change. You can continue to use your current ID for your iTunes purchases; it does not need to be the same as your iCloud ID. Of course, if you want to rid yourself of your husband's purchased list, you could change your iTunes ID as well. I wouldn't recommend this, however, as then you would be managing two IDs for your purchased media. This is because all existing purchases will remain tied to your existing iTunes ID and future purchases will be tied to your new ID.

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Firefox logo missing from new browser; would like to see it so I can know at a glance which browser I am using.

Bring back the logo or something else to allow quick identification of browser. Chrome doesn't have its logo in the browser either so now it going be harder to tell between the two. Is this a contest to see which can be more self effacing?

You can click the 3-bar Firefox menu button and open the Customize window.<br />
At the bottom of this window there is a button to enable showing the title bar.
See also:
*https://support.mozilla.org/kb/how-to-make-new-firefox-look-like-old-firefox
*https://support.mozilla.org/kb/common-questions-after-updating-to-new-firefox
*https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox
;[[Image:Customize Fx 29 Win8]]

At a glance what is new in Safari 5

This should give a little in sight:
http://lifehacker.com/5557731/first-look-at-whats-new-in-safari-5

I missed the 'Blue Bar', I'm glad it has returned

How can I create a new iCloud account for a familiy member having a new iDevice and reuse one of my aliases for it

Hi there,
I moved into iCloud from the very beginning and started with one iCloud account for me and my family, making use of email aliases for family members. Now the number of personal iDevices grows and I want to create a new and separate iCloud Account for my son. The pity is, that I reserved his full name already as alias address on my initial iCloud account. If I now delete this alias, can I create a new account with the former alias as new primary email address?
Or is there at least any transfer procedure supported for aliases between different accounts?
Thanks for your help, lauterbachj

Couldn't agree more... the folks who are getting penalized for this are the early adopters of .Mac/iCloud dating from the days when the only way to implement a "family" account was to use aliases. Now all my kids' / my wife's name aliases sit in my account, unable to move. I guess the good news is that if I delete them nobody else will get them, but this seems a pretty poor consolation.
Would it really be so difficult to implement a "move this alias to another iCloud account" option that requires the "sender" and "receiver" to exchange some sort of code to implement the transation in order to prevent fraud?

How can I update my old behance account into a new Adobe ID one?

My original behance account used an email address that was not linked to my Adobe ID so I ended up creating a new account by accident when prompted by the "Use your Adobe ID below to log in to Behance from now on." Now I can't use my name and I can't access anything from my old account.

Hi - we can definitely help! To have a private convo where we can give you your accont info, please write us a ticket here and someone will get back to you ASAP:
Behance Support & Forum : Submit a request for assistance

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

Error while creating a new connection in ODSM for OVD

Hi all,
I am getting the following error while creating a new connection in ODSM for OVD.
Error log:
[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by:
=======
java.lang.NoClassDefFoundError: Could not initialize class
com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub
at com.octetstring.vde.admin.services.client.ServerMgrServiceLocator.getVDEAdminService(ServerMgrServiceLocator.java:58)
at oracle.ldap.odsm.model.ovd.APServerProxy.connect(APServerProxy.java:248)
at oracle.ldap.odsm.model.ovd.APServerProxy.authenticateAs(APServerProxy.java:684)
at oracle.ldap.odsm.model.ovd.APServerProxy.authenticate(APServerProxy.java:286)
at oracle.ldap.odsm.model.ovd.APServerProxy.init(APServerProxy.java:216)
at oracle.ldap.odsm.model.ovd.APServerProxy.<init>(APServerProxy.java:198)
at oracle.ldap.odsm.model.ovd.OVDRoot.connectOVD(OVDRoot.java:185)
at oracle.ldap.odsm.ui.common.Connection.connect(Connection.java:120)
at oracle.ldap.odsm.ui.common.Visit.createConnection(Visit.java:663)
at oracle.ldap.odsm.ui.common.Login.saveChanges(Login.java:215)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(Unknown Source)
at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:812)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:292)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
... 28 more
How to resolve this issue.Pls suggest me.
Regards,
-Deena.

Hi Deena,
This error:
"[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub"
is known issue
Go to metalink, article: Unable To Connect To OVD 11g Webinterface Using ODSM. [ID 1282757.1]
You need to apply that patch.
I hope this helps,
Thiago Leoncio.

Error while creating a new Domain in BEA Weblogic

I am getting the below mentioned error while creating a new Domain in BEA Weblogic
Preparing...
Extracting Domain Contents...
Creating Domain Security Information...
Saving the Domain Information...
Storing Domain Information...
String Substituting Domain Files...
Performing OS Specific Tasks...
Performing Post Domain Creation Tasks...
Domain Creation Failed!
Domain Location: C:\bea\user_projects\domains\base_domain_1
Reason: Got error in writing the node manager C:\bea\wlserver_10.0\common\nodemanager\nodemanager.domains property file!
Exception:
java.lang.Exception: Got error in writing the node manager C:\bea\wlserver_10.0\common\nodemanager\nodemanager.domains property file!
     at com.bea.plateng.domain.DomainNodeManagerHelper.registerDomainToNodeManager(DomainNodeManagerHelper.java:138)
     at com.bea.plateng.domain.DomainNodeManagerHelper.registerDomainToNodeManager(DomainNodeManagerHelper.java:170)
     at com.bea.plateng.domain.DomainGenerator.generate(DomainGenerator.java:435)
     at com.bea.plateng.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:232)

Hi,
It look two ways either you dont have permission to write any new thing to that domain.properties file or might file is got corrupted.
Please check for the permission to that file.
Regards,
Kal.

New to JDeveloper10g

Similar Messages

Maybe you are looking for