New to Macs AND high speed internet. I'm a little unsure of what I'm doing.

I just bought my first iBook yesterday, and today my roommate subscribed to our local cable high speed internet. I'd like to configure a wireless network for both of us to use. Problem is, I have the Mac, and she has a desktop PC. Is there a way for the two to use the same wireless connection?
I'm sorry if this sounds like an elementary question, but I just want to make sure that I'm doing the right thing and that I get the right equipment. Thanks in advance for any help you all can give me.

Yes, you can use the same internet connection with a wireless router. Once the router is configured for your ISP (most have "Wizard setup" discs for PCs...from the Mac side you can use your browser to set it up) the iBook should find it and ask if you want to join the network. Just get a 802.11b/g compliant router.
John

Similar Messages

Verizon's new FiOS GigE Wireless N Router and High Speed Internet

So I got a deal in the mail to get an upgrade to [50/25] Mbps Internet (I currently have [15/5]...when I was reviewing it on line this message came up...
Verizon will provide up to [50/25] Mbps Internet with a wired connection. If you use your Internet primarily for wireless or WiFi connections, you have the option to upgrade to Verizon's new FiOS GigE Wireless N Router which will maximize your speed delivered through your wireless connection.
Upon completion of your order, you'll be provided with information for purchasing a router at Verizon's online equipment and accessories store.
I am VERY interested in getting super fast internet...my current internet is really good but it wouldnt hurt to bump it up. I have several devices using internet in the home...most of them wireless (including my PS3). I currently use a Verizon Actiontec router.
So here is my question...do I really need to get the above router to take advantage of that [50/25]? Also one other thing...My house is fairly large and I would really like to have two routers...is it possible to use two routers or a setup to have one upstairs and another downstairs?
Thanks in advance for the answers!
-Jest

There are a lot of variables that affect wireless range.
Walls, interference, other networks in the area, etc.
You don't indicate which older Actiontec you have.
Wireless capabilities also vary by Actiontec hardware revision (A,C,D,E,F,G,I).
In general, wireless range for 802.11n is somewhat less than 802.11g, even though the bandwidth is higher.
This is especially true on the 5Ghz band (which the latest Actiontec doesn;t support).
If you only need another 10 feet, you could try moving the router, or replacing the antenna with a high gain antenna.
http://www.meritline.com/high-gain-802n-2-4ghz-swivel-antenna-routers-network-card-adapters---p-4440...

Unable to activate my high speed internet account with a mac os 10.5

I have a big problem with the activation of my line. I have subscribed to high speed internet.
The agent came to my house to install the jack but when I'm trying to run the installation on my computer with the cd or directly with internet it's stops when smart acces opens (I have a Mac OS X 10.5). Could somebody help me ? Thanks

In almost all cases, internet is "plug and play" on newer computers.
If you need to install filters, they need to go between the phone and the jack for every phone you have on the same line as the DSL. The modem does not get a filter.
If you need to set up your username and password, you will need to log in with your default Verizon-assigned id. If you were not given this, then contact tech support and ask for your "vzid" and have them reset your password. You should then be able to log into verizon.net and click on the My Account page. On the My Account page, you can set your username, create sub accounts, manage your billing, add an alias to your account, etc.
Does that cover what you needed, or is there something more?
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

I just set up an Optus Cisco DPQ3925 wireless router to access higher speed internet I signed up for. I have a 4th gen airport extreme I want to put in another room and use as a wifi extender the wifi but I get an error message each time I try. Help?

Hello all.
I have just set up a new cisco DPQ3925 wireless router that Optus sent me to be able to access the higher speed internet I have signed up for.
I have a 4th gen apple extreme that I want to use to extend the wifi but when I try to update the settings via the airport utility I get a message that says it cannot do so, and to check it is in range and the wifi is set up correctly. I'm not experienced with these things but I can't think what I have done wrong.
Is anybody able to help me please.

You cannot use the AE to extend wireless from a non apple router such as your cisco modem router.. they are not compatible..
You need to tie to the two devices together either with ethernet or something like EOP adapters.. They are about $120 and you can price match in officeworks.

HT201272 used 2 days for download 1 magazine, it has been bad service from AIS ebook app and Matichon app.(download on high speed internet)

used 2 days for download 1 magazine, it has been bad service from AIS ebook app and Matichon app.(download on high speed internet)

iOS 6 came out a couple of days ago, so Apple's servers have probably been busy as a result of people downloading it

How can I set up a home wireless network with Comcast high speed internet?

I just signed up for Comcast High Speed Internet. I was able to get my Power Mac onto the internet. However, I connected my Airport Extreme and am unable to get it to recognize that I have an internet connection. I want to set up a wireless network in my apartment. Comcast tech support said that I only have one IP address.
Any suggestions as to how I can get my wireless network up and going? Thanks!

Should I change set up so that cable goes from the cable modem directly to Airport Extreme and then use the ports on the Extreme to run Ethernet Cable to Power Mac and other devices?
Yes
As an aside, would this setup allow me to hook my iBook up to Airport via Ethernet cable and let it get into Internet that way?
Yes

I do not have a high speed internet connection. How can I get Mountain Lion on a disk for install?

I do not have a high speed internet connection. How can I get Mountain Lion on a disk for install on my 24" Imac?

As long as you use your Apple ID to purchase it, I don't see why they wouldn't let you download the installer on one of their Macs and put it on a pocket drive.
Or, a friend with a high speed connection?
I agree with you about the delivery method, just trying to help you get what you want.

How can I get the Firefox browser to work with my high speed internet?

After switching from dial-up to high speed internet, I can no longer open the Firefox browser (which I was using) even after downloading the latest version. It is set for my default, but I can only use IE to browse. What else do I need to do to make it work?

You didn't tell me it was a user name password issue.
Open Keychain Access. (Applications/Utilities)
Select Passwords on the left.
Delete the Delta keychain.
Now from your Safari menu bar click Safari / Preferences then select the Autofill tab. Make sure: User names and passwords is selected.
Navigate to the Delta site. Login with your user name and password. You should be prompted to save that info to a new keychain.

Network not showing up for my newly installed high-speed internet

I recently signed up for high-speed internet, the tech came and did the installation and my router is working but the wireless network won't show up on my mac. Does anyone have advice?

ainekrg wrote:
the wifi could be disable on the modem, meaning that you will need to acess the 192.128.1.1 and enable it, knowing the exact model number will help more though...
Typo, meant 192.168.1.1
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Upgrading to high speed internet enhanced with budget local phone service?

Searched for this issue but can't locate anything on here. I have gotten conflicting information on this by phone and online chat. When I click on "Order Now" for High Speed Internet Enhanced (29.99) it takes me to the bundle page where it wants me to add TV service and upgrade my phone. All I want to do is upgrade to enhanced from the regular High Speed (19.99).
I don't know which dept I was connected to 1st on the phone, but her system wasn't allowing her to order it for me. She referred me to E center who wasn't sure and asked the online chat people sitting near him who said I have to upgrade my phone as well to get enhanced?
Is this true? I need to have a regional calling plan to upgrade to High Speed Internet Enhanced? Instead of paying an extra 10 bucks a month, it jumps to an extra 25 to 30 per month.
Does anyone else have budget phone service with High Speed Enhanced?

Step one: Visit http://www.giganews.com/line_info.html and post up the Traceroute the page shows, if you wish. Be aware that your non-bogan public IP Address will show up. It might shown up as the final hop (bottom-most line of the trace) might contain a hop with your IP address in it. Either remove that line or show only the first two octets. What I'm looking for is a line that mentions "ERX" in it's name towards the end. If for some reason the trace does not complete (two lines full of Stars), keep the trace route intact.
For example this what I saw when I was using Verizon
    news.giganews.com
    traceroute to 71.242.*.* (71.242.*.*), 30 hops max, 60 byte packets
    1 gw1-g-vlan201.dca.giganews.com (216.196.98.4) 13 ms 13 ms 13 ms
    2 ash-bb1-link.telia.net (213.248.70.241) 39 ms 7 ms 7 ms
    3 TenGigE0-2-0-0.GW1.IAD8.ALTER.NET (63.125.125.41) 4 ms 4 ms GigabitEthernet2-0-0.GW8.IAD8.ALTER.NET (63.65.76.189) 4 ms
    4 so-7-1-0-0.PHIL-CORE-RTR1.verizon-gni.net (130.81.20.137) 6 ms 6 ms 6 ms
    5 P3-0-0.PHIL-DSL-RTR11.verizon-gni.net (130.81.13.170) 6 ms 6 ms 6 ms
    6 static-71-242-*-*.phlapa.east.verizon.net (71.242.*.*) 32 ms 32 ms 33 ms
Step two: Can you provide the Transceiver Statistics from your modem?
#3 If you don't know how to get that info:
a) What is the brand and model of your modem?
b) If you have a RJ-45 WAN port router connected to it: What is the brand and model of the RJ-45 WAN port router?
#4 If you have a RJ-45 WAN port router connected to the modem, even if you know how to get the Transceiver Statistics from the modem: What is the brand and model of the RJ-45 WAN port router?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

E52 - High Speed internet

Hi All
Strange problem here, i am using my e52 to connect to the internet through my PC. When i use 3g, everything works. As soon as i enable high speed 3.5g (HSDPA) the following happens:
* I can surf the internet for 1 - 2megs, then it stops working (dns problems)
* Skype continues to work and i can chat and make video calls
* tracert fails after the first hop
I called my service provider thinking there was a problem with the HSDPA network in the area, they send someone out, he tested with a USB modem and it worked well, he also checked all the settings .ect on the phone/pc & left with a confused look on his face. We also swapped SIM cards.
checked other things like good signal, latest software patches, drivers
Any one have any other ideas besides sending the phone in?

@hadimassa
What you have said is true as well but not going in to the technical details of telecommunication,
from a layman's point of view,
personal observation, my e52 maximum speed is like 48KB/S ( .35 to .5 mb/s) downloading give or take.
Enabling the 3.5G features on the phone does not increase my download speed but instead may be slower.
Using the same GSM provider USB dongle, speeds can be above 1mb/s ADVERTISED UP TOP TO 3.2mb/s. using form the same location
I firmly believe GSM operators lock down the speed to mobile handsets at least in Tmoble (UK)
My brothers 3network speed is way faster.(3.5g)
So I just think if you buy an internet package form them with the high speed enabled you may be able to utilize that speed unless they lock down the Mac address for the USB stick.
But again depends on the area were you are and the availability of such high speed internet.
If you like my post kindly hit the Green Star Button on the left.
Nokia Phones owned: 3310, 8310, 7650, 3650,7210,6230, 6630, 6600,6100,6610, 6610i, 3230, 8800, 5700XM, E52 (only Nokia phones)

High Speed Internet Install Hangs

Another user already posted this problem but I seem unable to reply to that thread.
I am having *exactly* the same problem, namely:
Today is my Service Ready Date. I opened a browser and got the 'activation page', entered my line number, then got to download the verizon high speed internet installer for mac. Once I opened this I got to set up a username/password, then the installer went through a series of checks, and finally gets to 'saving settings for *******@verizon.net', where it says 'Please Wait, This step could take up to 3 minutes'. And it just hangs at that point. I waited for an hour and nothing happened. I tried again later with the 'resume installation' alias that was created when I quit the installer, and it jumps straight to that step as expected, but hangs again.
What could be causing this? I'm using a mac with MacOS 10.6, the modem is a Westell 7500, and the plan I've chosen is the 3MBs.
Thanks for any help!
Note: I copied the original poster's description of the problem because it is accurate in my case, revising only the OS version to reflect my own.
Link to original post
Declan

Update: 12 hours later. Still not solved.
Utterly appalling.
After 20 minutes on hold waiting for a second support chat, then a 20 minute chat during which the rep repeatedly asked for information I'd already given, and then congratulated me and told me the service was working (it is not) ... the rep finally conceded they could not help me and said a Mac rep would call me on the phone in "20-30 minutes."
It's 90 minutes later. No follow up, no call.
On my own I have re-started modem, re-started computer, trashed preferences for that Verizon activation software.
The last seemed to help.
Each time it got a little further.
Eventually it assured me I had completed the activation process. It gave me a confirmation.
Meantime Verizon has also e-mailed me saying congratulations, my service is up.
But when I try to connect to any page through the DSL in a browser, I keep being re-directed the Verizon activate / welcome page (which, believe me, I am pretty tired of seeing by now.)
https://activate.verizon.net/launch/welcome
... if I follow those steps, it tried to download the software *again* and start all over.
Seems I am in an inescapable loop. Can I really be the only one who's had this problem?
I have now three times "activated" my internet service and still I am re-directed to the "activate" page.
I can only say, at this point, I wish there were an alternative to this terrible company.

Wireless high speed internet connection

I would like to know if somewhere we can find a kind of PCS card for wireless high speed internet connection, but for power books and iBooks G4?
I'm living in mexico City and one company (iusacell) is offering the service but just with PCS cards for PCs, but no for macs.

Unfortunately, the 12" PowerBooks and both size iBooks lack the required PCMCIA slot for such cards, so they cannot be used at all.
The 15" and 17" PowerBooks do have a PCMCIA slot, but if your network doesn't supply Mac software or drivers, it probably can't be used.

How can I stop spam from someone called AT&T High Speed Internet? I do not know what the email address is.

I am receiving 100's of spam emails. They are all advertising different types of products but they all say they are from AT&T High Speed Internet. I have used the junk filter on them but it does not pick them up as junk. I have to do it manually each time. I have contacted my UVerse provider and they cannot assist because it is getting through Yahoo to Thunderbird. They say that it is a problem that I will have to have assistance from Thunderbird to resolve so that I can have this listed as junk and will not have to do this manually. I am at my wit's end. Please, please help me!

Yahoo has its own junk mail filter (Spamguard), which you should confirm is enabled:
* [https://help.yahoo.com/kb/mail/stop-spam-yahoo-mail-sln3227.html Mail Help | - SLN3227 - Stop spam in Yahoo Mail]
The significance of this is that marking messages as junk in Thunderbird probably isn't integrated with Yahoo's system, so Yahoo may not be getting trained to block them. You might need to go into Yahoo from time to time and mark accumulated junk as spam.
Separately, there are solutions for filtering spam on your computer as the mail is downloaded from Yahoo. Thunderbird has a built-in filter, as described here: [[Thunderbird and Junk / Spam Messages]]. However, if that isn't as effective you would like, there are third party products as well.

New to mac and iphoto, questions about photo structure & organization

I bought a new Macbook Pro a couple of days ago and am still figuring things out. I wasn't displeased with windows...I just decided to try a mac anyway, So far, I adore it except for one thing, the pictures.
I spent hours researching whether to download and use picasa 3 for mac or iphoto. I decided on picasa....and now I've changed my mind. (Mostly because I tried to take pictures of the moon tonight, and they looked great in camera, but Picasa could only pick up a black screen whearas iphoto actually saw and defined the moon- and with the editing software on the two, the picasa auto-edit looked like a picture that was created in microsoft paint, and iphoto came out with a beautifully contrasted photo).
Now that I decided to use iphoto, I have been researching how to switch and still seem to have a lot of questions. (I've poked around numerous forums but have found conflicting answers on different sites).
1) I organize my pictures by folders with the month and year. I know iphoto organizes events, which it seems to determine based on photo similarity. Will my photo structure still appear in finder -> pictures?
2) Is it possible to stop iphoto from organizing my pictures and just trust me on what I want?
3) All of my friends and family use PCs, and there is a chance that due to financial concerns, when I eventually replace my macbook pro (far in the future) I could switch to a pc. Does iphoto make transferring pictures more difficult? (If I understand correctly, it does not change the photo file, a jpeg is still a jpeg but I want to be sure)
4) I do not want iphoto to duplicate all of the pictures already in my library....if I import from finder-users-pictures, will it simply use those, or duplicate all 150gb worth of pictures?
5) Any other tips for someone completely new to macs and iphoto?
6) This is very silly, but how do I uninstall picasa (I know how to uninstall on a windows but want to make sure I do things correctly on my mac!)
Also, just a "bonus"- regarding events vs. files I create, will iphoto create events within the program but leave my file structure in the library it imports from alone? If I use finder to go to where I store my photos, will I still see my file structure regardless of what iphoto does?(Does that make sense? I'm having a hard time trying to describe it)
I apologize if this question is foolish or misplaced- I did read many other posts but didn't see the answers I was looking for.

Your questions are neither foolish nor misplaced.
The first thing I strongly suggest is that you make a trial iPhoto Library. Import 100 or 200 pics and explore. Iphoto isn't right for everybody, and if you're going to use it you will need to rethink things a little.
1) I organize my pictures by folders with the month and year. I know iphoto organizes events, which it seems to determine based on photo similarity. Will my photo structure still appear in finder -> pictures?
A: Events are based entirely on Date and Time not on 'photo similarity' You can set the interval for what makes an Event in the iPhoto Preferences: iPhoto Menu -> Preferences -> General Pane: Autosplit into Events... And select from the drop down menu.
Will my photo structure still appear in finder -> pictures?
Yes or no, depending... iPhoto can run as a Referenced or Managed Library. In the former case, yes you files will be visible in the Finder, in the latter case they won't.
Note that Referenced or Managed refers +only to file storage+ It offers no extra functionality, it does nothing at all. App like iPhoto are your go-to app for your photos. If you use it, then you never access the photos via the Finder. Ever. It's always via iPhoto or the many, many hooks into the OS that it has.
I'll detail more on Referenced v Managed below.
2) Is it possible to stop iphoto from organizing my pictures and just trust me on what I want?
I'm not sure what you mean by this. Iphoto does basic date and time organisation by default. You can change it, you can change the location of the photos in Events, merge them and then using the other tools available - Albums, Smart Albums, Faces, Places etc you can organise your photos whatever way you want.
But what do you mean by pictures. There is a distinction between Photos - the image of your child holding his dog - and files: A Jpeg is just a file. Iphoto is designed for you to +forget about the jpeg+ and get on with the interesting bit: the pics of your younger and his pet.
3) All of my friends and family use PCs, and there is a chance that due to financial concerns, when I eventually replace my macbook pro (far in the future) I could switch to a pc. Does iphoto make transferring pictures more difficult? (If I understand correctly, it does not change the photo file, a jpeg is still a jpeg but I want to be sure)
A Jpeg is a Jpeg is a Jpeg. If you migrate to another app or an entire OS you can export the photos plus any and all metadata you've added to the Finder and move it on. (Caveat: You cannot export Faces. There is no agreed standard on any system for exchanging this info.)
4) I do not want iphoto to duplicate all of the pictures already in my library....if I import from finder-users-pictures, will it simply use those, or duplicate all 150gb worth of pictures?
It can do either. And this brings me back to the Referenced v Managed discussion above. By default, iPhoto will Manage the files, that is, it will copy them into the Library. You can choose not to, but I strongly recommend that you don't:
*How to do it:*
Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
*What Happens:*
Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
*Some things to consider:*
1. Importing and deleting pics are more complex procedures. You have to to put the files where they will be stored before importing them. When you delete them you'll need to remove the files from the HD yourself.
2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
4. Because iPhoto has no tools for managing Referenced Files, if, for some reason, the path to the photos changes then you could find yourself resolving aliases for +each photo in the Library+ one by one.
My own opinion:
I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers
If disk space is an issue, you can run an entire iPhoto Library from an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
If you're concerned about accessing the files, There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
*If you want to edit the photo in another application:*
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
5) Any other tips for someone completely new to macs and iphoto?
*To Push Home a point*
For someone inexperienced with Macs and inexperienced with iPhoto I cannot stress enough that Managed Library is the way to go. I understand there is comfort in seeing all those folders. But inside the Library that's all there is: all those folders, stored so that an inexperienced user can't grub things up!
The iPhoto Library Folder is a Package File. This is simply a folder that looks like a file in the Finder. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves. Want to see inside?
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Standard Warning: Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
Now close that window and forget about it.
So, once you've imported your photos to iPhoto in a Managed Library, the surplus duplicates are +your folders+. Of course, in time, trash them to get back the wasted disk space. But don't do it today or tomorrow. There's no hurry. When you feel confident that you understand how iPhoto is working and that's it's working for you, theat's the time to reclaim the space.
I organize my pictures by folders with the month and year.
If you want to duplicate your Folder Tree in iPhoto:
Start at the bottom of the hierarchy and drag a folder of images to the Album Heading in iPhoto. The pics will be imported and an Album of the same name created.
You can then create the Enclosing Folders in the iPhoto Window (File -> New Folder) and drag the Album to it. Folders can contain other Folders (Nested Folders) and Albums.
However, is your folder system date based? Then this form of organisation is a bit pointless in iPhoto when Smart Albums or the Calendar tool (Click on the wee magnifying glass in the Search Box) mean you can find the photos taken on any day, month or year at a click. With Smart Albums it's easy to find photos from specific range - say, June 3 to August 25, 2009 etc.
If your folder system is theme based - Xmas pics, Birthday pics etc, then you'll find Keywords are much more flexible, and can be used in conjunction with other criteria for making Smart Albums and searches.
6) This is very silly, but how do I uninstall picasa (I know how to uninstall on a windows but want to make sure I do things correctly on my mac!)
Drag the app to the trash and empty it.
Regards
TD
v

New to Macs AND high speed internet. I'm a little unsure of what I'm doing.

Similar Messages

Maybe you are looking for