New to Netweaver : User has no permission to access SLD.

Hello friends,
I am developing a application using webdynpro using JAVA.
I installed J2EE engine with SAP netweaver Developer Studio. I am facing problem with following Prerequisites:
"The SAP System Landscape Directory (SLD) and the SLD bridge are configured and running."
I checked http://sparrow:50000/sld but it gives.....error...
403 Forbidden
You are not authorized to view the requested resource.
So, anybody can tell me how to give permission to username?
where to give permission and how to open it? Please let me know in detail. (Directory structure/Path)
I am a newbie in SNDS.
Regards
Ronny

Hi Ronny,
In order to access SLD, you should have SLD roles like SAP_SLD_GUEST etc.
Check this [link|http://help.sap.com/saphelp_nwce711/helpdata/en/48/b7b38fecf26745e10000000a421937/content.htm]
Thanks
Sunny

Similar Messages

Job scheduling failed because the user has no permission to access this rep

Hi. I've OBIP 10.1.3.4.1.
When I launch a print with the scheduler I see this error:
oracle.apps.xdo.servlet.scheduler.ProcessingException: Job scheduling failed because the user has no permission to access this report. [REPORT_URL]=[folderreport/report/report.xdo], [USERNAME]=[administrator]
     at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.scheduleJob(SchedulerServlet.java:1140)
     at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.doPost(SchedulerServlet.java:295)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:100)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
In this env. I've a LDAP Security Model and all the report and all the users work.

Please check whether you have assigned below responsibility to the user trying to schedule report.
XMLP_SCHEDULER

How to find out which user has the permission to execute startsap ?

Hi All
How do I find out which user has the permission to execute the startsap and stopsap? Do I control the permission on those script using windows standard authorization? For example: only allow certain user have the read and write permission?
Thank you.!
Vincent Lo

Well to me this is really weird question..
<b>noone un-authorized should have access to OS on your system</b>
If this is valid you do not need to solve problems who can and who cannot start/stop SAP, because if you want to prevent some users from shutting down the SAP you have really hard job to do - there are many ways how to kill the SAP (for example killing relevant process from task manager, killing of database, messing with services etc.) - yes, this is harmful way of stopping SAP, but we are talking about attack, right? I would contact some Windows specialist to help you disable all the ways how to harm the running SAP. But still after that - there are many files that can be modified/deleted so SAP will crash after restart - you need to protect them too, etc.
In case you take the first assumption as granted (and you really limit access to this server) you do not need to worry who can stop or start SAP - at the other hand it may be handy to be able to start/stop SAP from other users - for this you can run the stop/start script "under different user".
But to answer the question - to me this is question just of access control (but really never tried that myself):
<a href="http://technet2.microsoft.com/WindowsServer/en/library/c6413717-511e-42bd-bd81-82431afe4b2a1033.mspx">Permit or restrict access to a snap-in for a domain</a> (or see other related links down there on this page)
Please award points for useful answers.
Thanks

How I can know if a user has the permission to read a file or not ?

Hello,
I have other question :
How I can know if a user has the permission to read a file or not ?
Smaine
ThanK's

I don't think common operating systems have an easy way to do that check.
If you have a limited number of files, implement access control yourself, instead of using operating system permissions. E.g. write a configuration file that contains:
# Syntax: "filename": "list of users who can access that file"
somefile.txt: fred, alice, bob
somedir/anotherfile.txt: bob, joe
Read in the configuration file and check against it when a file is being requested.

The user has denied all applications access to their media

OK, so I have had this problem before and solved it unknowingly and now it is reoccurring!
"error:
Error Domain=ALAssetsLibraryErrorDomain Code=-3312 "Global denied access" UserInfo=0x169aa0
{NSLocalizedFailureReason=The user has denied all applications access to their media.,
NSLocalizedRecoverySuggestion=This setting can be changed in Preferences.,
NSLocalizedDescription=Global denied access}"
Please NOTE://I do not get this issue in the simulator - my code for iterating assets works perfectly on the simulator.
Surely this is an easy fix but be damned if I can find anything under 'Preferences' anywhere that assists.
Please halp!

- Location services must be enabled for the application...
I realise that there is geotagging involved but what a joke!

User has appropriate permission, still not able to access one of the sharepoint site applications.

Hi,
I have tried all solutions available on internet regarding this problem but none seems to work.
As per one solution I added the user in sharepoint site collection administrator group still no luck!
As per another solution I tried to run “User Profile Service Application Proxy – User Profile to SharePoint Full Synchronization”
“User Profile Service Application Proxy – User Profile to SharePoint Quick Synchronization”
but they dont run for some reason. Both these jobs are scheduled to run everyday but last time they ran was some date in 2011. When I click on Run Now nothing happens.
I deleted all cache, forms password history everything. Added the site in trusted sites and all. No luck!
User also tried to access the site by logging onto another system but still same issue.
This user recently joined alongwith a few more people. All of them are able to access the site except this particular user. So, a web part or unpublished page cant be the reason, right?
This user is only able to access the home page which is say http://<siteurl:1234> application while the site which this user is not able to access is
http://<siteurl:2345>.
I even tried to give access through sharepoint designer but no luck! Please help!
PS: This may not be relevant but still I'm sharing. Earlier I used to add users in manage user profiles - new profile. But now as soon as the user is added into active directory there profile is getting created automatically. This might be happening due to
active directory and user profile sync but the question is how? Because I dont remember configuring this. And it was not configured earlier too.

Hi,
According to your description, my understanding is that only one user cannot access the site even though he has the right permission.
I recommend to verify the things below:
Check the permission of the user in the site to see if the permission is right.
Is http://<siteurl:2345> a new site collection ? Can the user access other pages except the home page in
http://<siteurl:1234>?
Grant needed permission to the user in the web application to see if the issue still occurs.
Delete the user and re-add the user in AD to see if the issue still occurs.
Check the ULS log for detailed error message.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Apache user dir (13)Permission denied: access to /~simha/ denied

I am getting Access forbidden! when I am trying to connect to http://localhost/~simha/ where simha is my user name
my /var/log/httpd/error_log says
[Thu Jul 08 17:44:30 2010] [error] [client 127.0.0.1] (13)Permission denied: access to /~simha/ denied
I tried a lot and gave up. Can any one help me in this in regard
The following are the permisions of my home dir simha and public_html
drwx--x--x 130 simha users 16384 Jul 8 17:04 simha
drwxr-xr-x 2 simha users 4096 Jul 8 17:02 public_html
The following are my httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks includes
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# phpMyAdmin configuration
Include conf/extra/httpd-phpmyadmin.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
Include conf/extra/php5_module.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
The following are my /etc/httpd/conf/extra/httpd-userdir.conf
# Settings for user home directories
# Required module: mod_userdir
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Note that you must also set
# the default access control for these directories, as in the example below.
UserDir public_html
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
<Directory /home/*/public_html>
AllowOverride FileInfo AuthConfig Limit Indexes
Options MultiViews Indexes SymLinksIfOwnerMatch ExecCGI
<Limit GET POST OPTIONS PROPFIND>
Order allow,deny
Allow from all
</Limit>
<LimitExcept GET POST OPTIONS PROPFIND>
Order deny,allow
Deny from all
</LimitExcept>
</Directory>
I also tried adding user to the group http. BUt nothing is working.

Do you have [or more like lack] +x on the user folder?

New Mega Pc User has questions!

Hey Guys, I'm new to this forum. I just bought a Mega PC, running a 2.6 celeron, 1 gig of samsung ram and an 80 gig maxtor HD. I've read through the many threads in this forum but couldn't find what i'm looking for
1) has anyone been able to mod the mega pc so that the LCD can be functional in PC mode? its such a nice display! such a waste to just show the time in pc mode
2) i've read through the forums here and some people say that they can use the remote in PC mode specifically when using windows media player to play music. Did you have to update anything to allow this?
I'm new to this board so any info regarding moding the mega pc in terms of LCD and remote functionality would be great!
finally i place where i can find other mega pc users!

Quote
Originally posted by swalesgeeza
Yeh this is about the functionality in the PC mode, if you play all your media, inc Movies the remote will pause play stop etc in media player.
WOuld it be possible for someone to be kind enough to post a link to the greeting program for the LCD display? so many of us would like it!
Also Could you tell me if the light on your card readers is always on?
Also when running MSI live update it always says i need the drivers again after i downloaded! and the version for the mega pc on the web page only does the radio!
i didnt get a CD with the PC so i have the web drivers. am i missing alot?
Did the MSI media center come on the CD?
any one in the UK want to sell me a CDR copy?
if so please email [email protected] can send you a couple of quid on paypal or somthing
yes if you download the latest version of msi radio from the support page, you will be able to use the remote when the computer is on for media player. For example. if the computer is on, and you press "hi fi" on your remote, media player will automcatically open and the lcd lights up and says "cd", has the play arrow and the circle rotates. i wish the equalizer came on! :P
yes my card reader light is always on, don't worry i don't think this really matters
Actually if you run live update 3 (the website based version) it tells you the version you have, and the version on the web. I think its up to you to compare each version and download if necessary.
If you didn't get the cD don't worry you are not missing anyhting i think. IT just had agp, video, network, modem, and audio drivers, all of which are on the website with latest versions. Some utilities are on the cd as well, but all and MORE are found on the website.
AND YES IF ANYONE HAS THE "GREETING" PROGRAM PLEASE POST!!

New PSE 10 User has a question

Can anybody out there tell me how to inport pictures from Aperture to PSE 10?

Most often, you would want to set PSE as your external editor and send the photos from Aperture to PSE, edit them there and save over the existing file without making any changes in the name or file format in order for aperture to make a version for you. (You may need to make a change in Editor>preferences>saving files>on first save for PSE to do this). If you want to change the name or format, you would need to save to the desktop and import the edited file back to aperture as a new image.

User has no authorization for function group SWRS

Dear SRM Gurus,
We are facing an issue u201CUser has no authorization for function group SWRSu201D.
Hope the user has no authorization to access function group SWRS and this function group is saying that workflow substitution.
Can you any one have any idea what scenario are we using Workflow substitution?
Is there any Roles need to be assigned?
I would be appreciating if you could let us know more detail on this.
Thanks.
Regards,
Magesh Basavaraj.

Hi,
The authorization object is 'S_WF_SUBST' for substitute role..try to assign this object and check..
Saravanan

SharePoint C# Get list of sites on which user has permission (Read, Contribute, Owner, Admin, Visitor)

HI,
I wants to get list of sites on which user has permission, all permission name like (read, visitor, contribute, owner)
using (SPSite oSite = new SPSite(SPContext.Current.Site.Url))
foreach (SPWeb oWeb in oSite.RootWeb.GetSubwebsForCurrentUser())
permission = string.Empty;
foreach (SPGroup group in oWeb.Groups)
foreach (SPUser u in group.Users)
if (u.Name == (userName))
foreach (SPRole role in u.Roles)
permission += role.Name.ToString() + ", ";
} // Taking All Permission details of user
permission = " [" + permission.TrimEnd(", ".ToCharArray()) + "]";
my final string variable will have values like [Read, Visitor] or [Read] or [visitor, Read]
I wants to have all permission names and also geting error on u.Roles [Roles is absolute now],
Help me to get permission by using SPRoleDefination etc
SPRoleDefinitionCollectionroleDefinitions
= oWeb.RoleDefinitions;
SPRoleDefinitionroleDefinition
foreach(SPRoleAssignmentroleAssigment
inoWeb.RoleAssignments)
Thanks
Praveen

Depending on how large your farm is and how many webapplications / site collections you need to enumerate to build this list, you might be better off using search to get the list of sites/webs that the user has access to (search results are security trimmed).
You could then enumerate just the list of sites returned to determine the exact permissions.
E.g. Code for getting a list of sites the user has access to:
var ssaProxy = (SearchServiceApplicationProxy)SearchServiceApplicationProxy.GetProxy(SPServiceContext.GetContext(SPContext.Current.Site));
var keywordQuery = new KeywordQuery(ssaProxy);
keywordQuery.RowLimit = 200;
keywordQuery.SelectProperties.Clear();
keywordQuery.SelectProperties.Add("Title");
keywordQuery.SelectProperties.Add("Url");
keywordQuery.ResultsProvider = SearchProvider.Default;
keywordQuery.QueryText = String.Format("contentclass:STS_Site OR contentclass:STS_Web");
keywordQuery.ResultTypes |= ResultType.RelevantResults;
ResultTableCollection searchResults;
searchResults = keywordQuery.Execute();
if (searchResults.Exists(ResultType.RelevantResults))
var searchResult = searchResults[ResultType.RelevantResults];
var results = new DataTable { TableName = "SearchResults" };
results.Load(searchResult, LoadOption.OverwriteChanges);
if (results.Rows.Count > 0)
var resultsText = new StringBuilder();
foreach (DataRow dataRow in results.Rows)
var urlToWeb = dataRow["Url"] as String;
//Perform your checking to determine the exact permissions
Regards, Matthew
MCPD | MCITP
My Blog
Please remember to click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if it was useful.
I just added a webpart to the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
Upload and Crop User Profile Photos

10gR2 has no permission for "other" unix user

We installed 10gR2 on RHEL3, created a database. As user "oracle", we are able to connect to the database. As any other user, we are not able to get to sqlplus. The environment variables are fine for the user.
When checked, we found that $ORACLE_HOME has 740 permission, and many directories/files underneath have the same permission. So, the "other" user is not able to get to the executable, or even it does, it can't execute it.
Anyone seen this from 10gR2 install on Linux? Any good work around?
I have not seen this from 10gR1.

Hi.
I have not tried to install 10gR2 yet, so I'll do a guess, ok? Maybe Oracle is doing this to get a more secure environment.
You asked for a workaround. Well, I have a procedure I follow in Oracle installations, and do not consider it to be a workaround. Anyway, it may be helpful for you.
On many of my installations, I've changed umask for "oracle" account to 0027, in order to get files created with 0640 and directories with 0750 permisssion flags. Doing this is a security issue: you prevents, on purpose, users from others groups even to access oracle directories and files.
Moreover, I use to create an "orauser" group, and make "oracle" acount use this group as a secondary group . On Linux, you may achieve this by typing:
groupadd orauser # Create a new group called "orauser"
gpasswd -a oracle orauser # Add user "oracle" to group "orauser"
id oracle # Just check the oracle account
Then, you may add any user you need to "orauser" group as well. In order to get all environment variables to be correctly set, I create a "oraenv.sh" shell script, to be run for all users on logon. The code bellow may be added on /etc/profile, or on a new shell script on /etc/profile.d (this directory is present on some Unix/Linux flavours):
# Define location for oraenv.sh shell script.
oraenvScript=/oracle/local/bin/oraenv.sh
# Check if user belongs to groups: dba, oinstall, oper, orauser
if [ `id | egrep '(dba)|(oinstall)|(oper)|(orauser)' | wc -w` -gt 0 ]
then
# Check if oraenv.sh file exists
if [ -f $oraenvScript ]
then
# Source Oracle environment variables from oraenv.sh
. $oraenvScript
fi
fi
Hope this help.
Best regards,
Danilo

Get The EXECUTE permission was denied on the object 'sp_send_dbmail', database 'msdb', schema 'dbo', even when user has permissions

I get the error message: The EXECUTE permission was denied on the object 'sp_send_dbmail', database 'msdb', schema 'dbo'. This happens when I run a job, even though the user has the correct permission on sp_send_dbmail and is a user in msdb.
If I run the procedure through SSMS it runs just fine and sends the mail.
I have run out of things to look for, any ideas on what else it could be?
Thanks in advance,
Nancy

To send Database mail, users must be a user in the msdb database and a member of the
DatabaseMailUserRole database role in the msdb database. To add
msdb users or groups to this role use SQL Server Management Studio or execute the following statement for the user or role that needs to send Database Mail.
EXEC msdb.dbo.sp_addrolemember @rolename = 'DatabaseMailUserRole'
,@membername = '<user or role name>';
GO
http://technet.microsoft.com/en-us/library/ms188719(v=sql.105).aspx
Regards, RSingh

I don't have a question so much as a comment for APPLE. I am a new iPhone 5s user and it has many things I like but It is too small and I can only talk on the phone and use the internet if i am in a position to use a wifi connection and that is not good

I am a new iPhone 5s user. I like many of the features it offers. I don't like that I cannot talk and use the internet (if I am away from WI-FI) and this phone is too small. I am actually thinking of returning it and going back to an Android. After all the hassle it took to get all my stuff working on this phone , it may be worth the switch. This phone needs to be able to multitask freely in this day and age. Also Safari is not the best search engine but I could work with it if I could talk and use it at the same time. I use my phone for business and this is a feature that is needed in my line of work.

TJBUSMC1973 wrote:
The iPhone is working, as designed and advertised. In this case, the user failed to educate themselves properly, either by proper research or asking the right questions, before purchasing the device.
I understand that the OP failed to do research. But then, I wasn't replying to the OP. I was replying to Chris. I have Verizon. I can talk and use data at the same time with my Droid Maxx. Therefore, the problem is not just with the network. It would be technically possible for an iPhone to do that on Verizon/Sprint if Apple had chosen to use a different chip, such as the kind other phone manufacturers have elected to use.
Of course, this is probably all irrelevant to the OP's issue. It was merely a point of clarification, especially for those people who are used to being able to use both voice and data at the same time on Verizon. When they switch to an iPhone, they are often surprized at the limitation.
Best of luck.

Wind Vista SP2. iTunes 10.6.3.25. I'm trying to Consildate my Music Library on this PC, and get the error: "Copying files failed, because you don't have permission to change your iTunes Media folder or a folder within it." My admin user has Full Control

Any suggestions would be greatly appreciated!

I did what you suggested on all three folders: The main Music folder on the Mac hard disk, on the iTunes folder on the external 160GB Hard drive which contains the current media content and on the new 2TB hard disk on which I created a new media folder. I selected permission for myself which were already read+write and chose the apply to enclosed items on all three folders. I then changed the permission for others to read+write and applied to enclose items also an all three folders.
But it didn't solve anything.
Here's what happens: I choose the new directory in iTunes preferences (the media folder on the 2TB disk) I then go to File > Library > Organize Library and then choose Consolidate files. A window pops up and says copying "filename" with a progression bar underneath but the filename never changes. Instead the beachball appears when the mouse pointer hoovers over iTunes. Upon pressing the iTunes icon in the Dock it says that iTunes is not responding. At this point there's 2 different ways:
A - If I then force quit iTunes the iTunes window disappears but the application does not close. When I want to eject the 2TB disk it says it's being used by another application. Only when I cut the power to the 2TB disk does iTunes fully close. A window then pops up and says that the drive was not put away properly etc.
B - if I cut the power to the drive without force quitting iTunes, a window appears with the said: "Copying failed because you don't have permissions to change iTunes media folders etc." iTunes remains open and fully functional.

New to Netweaver : User has no permission to access SLD.

Similar Messages

Maybe you are looking for