New to OBIEE 11g

hi all
im new to 11g, been working with 10g for the past 4 years.
just finished the install and and everything looks good.
open up the admin tool, and open the repository
and its asking me for a repository password to coreapplication_OH1406836271
what is this?
i enter the password i used when running the RCU, but it returns with incorrect repository password.
is this just the repository for the sample came with the install?
cheers
Ryan

Hi,
Try it
Username :weblogic
Password:Admin123
Note:The Repository password for SampleAppLite is Admin123 (found it in the Repository Developer’s Guide).
Some more like for reference :
http://download.oracle.com/docs/cd/E17904_01/bi.1111/e10540/planning.htm (here u can find SampleAppLite RPD password)
OBIEE 11g Documentation
Deploying new RPD:
http://obiee101.blogspot.com/2010/08/obiee11g-deploying-new-rpd.html

Similar Messages

OBIEE 11g + OBIEE 11g Samples (rel.825)

Hi all.
I'm quite new in OBIEE 11g. I used to have some experiences with version 10g but 11g seems to be more advanced.
Generally I've installed DB11g then OBIEE 11g and started configuring samples according to documentation regarding release 825.
Everything went fine but when I try to run any report I get errors like:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 17001] Oracle Error code: 1017, message: ORA-01017: invalid username/password; logon denied at OCI call OCISessionBegin. [nQSError: 17014] Could not connect to Oracle database. (HY000)
Problem is that I can't find out what user is it talking about !
During installation I've created:
- BISAMPLE/BISAMPLE
- obiee_navteq (for maps)
Both user profiles and other BI profies are working fine. So I have no idea where shall I look for mistake.
On EM application for 'coreapplication' I see errors like:
Message Level 1
Relationship ID 0
Component OracleBIServerComponent
Host oraclebi11g
Host IP Address 10.61.7.54
Thread ID 50c
ECID 0000IfC2ksIC^qt5ofH7iY1CVNDo0001CA
Message [nQSError: 17014] Could not connect to Oracle database.
Supplemental Detail [nQSError: 17001] Oracle Error code: 1017, message: ORA-01017: invalid username/password; logon denied
at OCI call OCISessionBegin.
[nQSError: 43119] Query Failed:
[nQSError: 43113] Message returned from OBIS.
Does anybody can help me?
Regards,
Tomasz

Hi - how did you deploy the application?

Report migration in OBIEE 11g

Hi
I am new to OBIEE 11g.
1. I want to migrate report dashboard from DEV instance to UAT instance.
2. I want to share reports to other users.
Kindly someone give me guideline to proceed.
Thanks
Krishna

Check these links.. it is more or less same as in 10g case by case.
You need to select the report/dashboards archive and unarchive using catalog manager.
If your Dev and UAT are already set with groups/roles then you suppose to do online mode so that the security settings will persist during archive and unarchive..
http://gerardnico.com/wiki/dat/obiee/promotion
http://www.rittmanmead.com/2008/04/migration-obiee-projects-between-dev-and-prod-environments/
If helps pls mark

How to create report in OBIEE 11g?

Hi,
I am new to OBIEE 11g.
Please help me, How to create new report in OBIEE 11g.
Thanks in advance,
A. kavya

Try here: https://apexapps.oracle.com/pls/apex/f?p=44785:24:15065577435567::NO::P24_CONTENT_ID,P24_PREV_PAGE:8113,2

Content level setting in OBIEE 11g

Hi,
i am new to obiee 11g.i have an doubt in setting up the content level setting in BMM layer.i have given details level in fact LTS content tab with help of physical join,i dont get any error but while trying to generate reports i am getting an error "None of the fact table is compatible with the requested level".where i am commiting mistake,do i need to set content llevel based on physical join or logical join scenario.kindly help regarding this.
thanks in advance!
Edited by: Nandha on 10 Jan, 2012 10:55 PM

Hi Nanda,
We set the content level of logical source based on the granularity of the source.
Say, a product hierarchy is like
Category -> Sub Category -> Product
Say one of your dimensions has Product information, for this source set the level as 'Product'
Say there is an aggregated source which has Category information, set the source level as 'Category'.
Hope this helps you to set your levels.
Thank you,
Dhar

OBIEE 11g presentation services login error

Hi All,
i am new to OBIEE 11g i have installed software and when i tried to login presentation services it is giving following error please help me.
i stated all services in EM and in services (oracle process manager and node manager also)
Enter your user id and password.
Unable to Sign In
An error occurred during authentication. Try again later or contact your system administrator.
please help me
reg,
jel

chane the password in weblogic console for weblogic user and try one more time..may be its problem of wrong pwd..

Unable to do Grand Total in Pivot table view in OBIEE 11g

Hello Experts,
I am totaly new for OBIEE 11g
I have created a report and wanted to do row wise total. Simple grand total in OBIEE 11.1.1.5 version. While doing the summation 'After'. I am getting a Window internet explorer Pop-up Saying the following.
"Are you sure you want to nevigate away from this page?
The changes that u made on this object has not been saved. Click cancel to return to the editor where u can save the object.
Press OK to continue or cancel to return to the page".
I tried both option, but non of the options are working.
Please provide me a solution on priority because client is on head.
Thanks in Advance.
Niraj

Hi,
Its Permissions issue.can u please try to do it outside local mechine(just open IE8 then call the server url from outside ). i hope u tried inside server pc its limited permissions for logged in users thats why its not allowing to do edit the anaysis report.
let say u have DEV/UAT servers the application installed with some other users (admin group user or power user) while u r accessing and doing devalopment better to use outside browers .
Note: i have also faced same issues (IE8 browser security level permission in win 2008 server).solution u can just try to access the url from outside server.
Thanks
Deva

Create a user in OBIEE 11g

Hi,
I am new to OBIEE 11g.Can any one help to create an user?I mean to say when he types that URL,the user login screen comes and he can use his own user ID and password to do the same.
Regards,
Mainak

Mainak,
To create a new user you have to use the weblogic server admin console.
For example, http://hostname:7001/console.
Here is a good link that explains how to do this.
http://varanasisaichand.blogspot.com/2011/03/obiee-11g-security-creating-users-and.html
Adil
Please assign points if the answer is helpful

Hirarchies In OBIEE 11G.

Hi Friends,
I am New to OBIEE 11g,
I have a doubt about Hierarchies, In this concept how to implement drill-up concept in obiee 11g,
where we use this in real time..!
Regards.........!
Cnu.

you can achieve drill up like functionality using Bread crubs..for info refrer the below link..
Bread crumb navigation in OBIEE

Different calculation on each column in table in obiee 11g report??

Hi ,
I have to display values in a table for measures in obiee 11g report which should hold different calculation on each column. For ex:
Result 1:
Flag Display   Transaction Amount
C      'A'                 2              3
C      'B'                 3               0
       SubTotal1            5             3
Result 2:
Flag Display   Transaction Amount
H      'C'                 2              11
H      'D'                  0              0
       SubTotal2          2             11
Result 3:
Flag Display   Transaction Amount
H      'C'                 1              0
H      'D'                  1            0
       SubTotal3          2            0
Final Result:(Transaction shd hold :-subtotal1-subtal2 , Amount should hold:-subtotal1-subtal2+subtota3)
Flag   Display               Transaction         Amount
C    'total tran(1-2)              3                     8
       Total Amnt(1-2+3)'
Please help me how can i achieve this ... ??? I am new to OBIEE 11g.
Thanks,
Pavi

There are a few things I cannot understand; I'm assuming Transaction and Amount are fact columns. Then how do they have different values for the same values of Flag and Display ??
Anyway, sub total can be achieved by going to edit view for the table and from columns and measures area under the Layout pane click on the summation icon and select After. This will automatically display a grand total value at the bottom of each fact column.
Now, to get the final result, say Total Transaction you can add a dummy column and edit its formula.
     Total Transaction = trans_subtotal1 - trans_subtotal2 and
     Total Amount = amt_subtotal1 - amt_subtotal2 + amt_subtotal3
     Now if we could say that trans_subtotal1 is the total of transaction value when Flag = 'C' or something like that then you can get this value of subtotal1 by using the formula FILTER(SUM("Subject Area"."Folder".Transaction Column") USING (DESCRIPTOR_IDOF("Subject Area"."Folder"."Flag column") = 'C')). Similarly we can obtain subtotal2 and subtract them to get the total transaction value. But I am sure if we can do this because for the same values of Flag and Display, Transaction has different values. But by using the above formula, the values we obtain for subtotals 2 and 3 will be the same. So calculating Total Amount would be a problem.
The above formula is obtained by going to edit formula and selecting the filter option at the bottom of the edit dialog box.
Hope I made my point clear

OBIEE 11g services.

Hi Gurus,
I am very new to OBIEE 11g,I had installed 11.1.1.3 in my PC,I have some questions....
1)when I am trying to open default RPD it is asking Repository password..what is the default pwd?
2)what services need to up and run in services(like OBI server,OBI presentation server in 10g)?I used "start BI services"...any services also need up and run.
any one please send me some good links to do practice on Admin tool,answers,dashboards to get exposure on 11g......

Hi,
1)when I am trying to open default RPD it is asking Repository password..what is the default pwd?
Default Repository Password is : Admin123
2)what services need to up and run in services(like OBI server,OBI presentation server in 10g)?I used "start BI services"...any services also need up and run.
User : Give the weblogic user name *(you have crated the user while using RCU)*
Password : Give the Password *(you have crated the user while using RCU)*
OR
Create new user with Administrators/BIAdministrators.
Stepes:
Login to Weblogic Admin Console -> Security Realms -> myrealm -> Users and Groups [Tab] - New user -> [ex] User1 with password
-> Click on the user1 - Select the Groups Administrators/BIAdministrators
Now you can login to Repository in online mode with User1
Thanks,
Balaa...

OBIEE 11G Formatting Question

Hello - I'm new to OBIEE 11G.
Is there a way to format one column of a pivot table to have the percentage sign (and possibly have more decimal places) and leave the rest to whole numbers?
Thank you.
Jennifer

To format a column, simple go into the column properties and change it to percentage.
Take a look at the documentation...
http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10544/format.htm#i1030865

I cant able to create a new Analysis and Dashboard prompt in OBIEE 11g

Hi Gurus,
i try to create a new Analysis in OBIEE 11g in (brower: ie,Google chrome, Mozila), i got the error "*unterminated string literal*" and "*Exception at function updateSelectionsPanel: unterminated string literal*".
and i try to create a new Dashboard Prompt using column prompt when i select the column i don't get the filter form and not to be add the column prompt in the Dashboard Prompt.
Thanks,

Moving this discussion to the Adobe Creative Cloud forum.
Kriskristferson if you are facing difficulties with your order then please contact our support team directly at Contact Customer Care.

Error while deploying new RPD in obiee 11g

Hi ,
Getting the below error , while activating changes , after deploying a new RPD through EM :
Message SEVERE: Element Type: JEE_SERVER, Element Id: 01HW447397:bi_server1, Operation Result: UNEXPECTED_ERROR, Detail Message: Exception occured during setting configuration values.
Supplemental Detail Underlying cause of exception was:
oracle.bi.management.exceptions.ConfigMBeanRTException
Failed to generate edit filename for: C:\WINDOWS\ODBC.INI; java.io.IOException: Access is denied
Report on underlying changes made is:
INFO: Element Type: JEE_SERVER, Element Id: 01HW447397:bi_server1, Operation Result: APPLYING_CONFIGURATION_CHANGES, Detail Message: null
FINE: Element Type: ORACLE_INSTANCE, Element Id: 01hw447397:instance5, Operation Result: APPLYING_CONFIGURATION_CHANGES, Detail Message: null
FINE: Element Type: BI_INSTANCE_DEPLOYMENT, Element Id: 01hw447397:instance5:coreapplication, Operation Result: APPLYING_CONFIGURATION_CHANGES, Detail Message: null
FINER: Element Type: SYSTEM_COMPONENT, Element Id: 01HW447397:coreapplication_obis1, Operation Result: MODIFIED_ATTRIBUTE, Detail Message: Attribute: RepositoryName set to value: PaintDesign_BI0008.rpd (was: DipTest_BI0005.rpd)
FINE: Element Type: BI_INSTANCE_DEPLOYMENT, Element Id: 01hw447397:instance5:coreapplication, Operation Result: APPLYING_ENDPOINT_CHANGES, Detail Message: null
FINER: Element Type: SYSTEM_COMPONENT, Element Id: 01HW447397:coreapplication_sawbridge, Operation Result: MODIFIED_ATTRIBUTE, Detail Message: Attribute: sawservers set to value: 01hw447397:9710 (was: )
FINER: Element Type: SYSTEM_COMPONENT, Element Id: 01HW447397:coreapplication_obips1, Operation Result: MODIFIED_ATTRIBUTE, Detail Message: Attribute: JavaHostProxyHost set to value: 01hw447397 (was: )
FINER: Element Type: SYSTEM_COMPONENT, Element Id: 01HW447397:coreapplication_obips1, Operation Result: MODIFIED_ATTRIBUTE, Detail Message: Attribute: JavaHostProxyPort set to value: 9810 (was: )
FYI , I succesfully checked in the RPD , tried restarting all BI services and re-login into EM . But the error still exists .

Thanks for your replies !!
In any of the RPD deployments I'm getting the same error , not for some particular RPD .
FYI , yesterday (before this issue) I had a issue with starting presentation services , so as adviced in forum I replaced the files sawguidstate and sawguidstate.atrin the location:
<Instance_Home>\instances\<instance_name>\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\<project>\root\system\mktgcache\<name>
with the same files from a backup or from another working OBIEE 11g (11.1.5)instance.
plese refer : Re: Unable to start presentation services , in OBIEE 11g
Is this causing the deployment issue ?

OBIEE 11G - Navigation:How to open in New page/new tab.

Hi All,
When I click on a link in report it opens another report on the same page. Instead I have to open the report in a new page/new tab. Is this feature available in obiee 11g version? If yes, could you please tell me how to make it possible?
Thanks in advance,
Sunita

hi
Use Action Link...to open link in New Window
1.Go to edit Dashboard...
2.Select Action Link from Dashboard Objects.
3.Click the Action Link Properties and Type your Report Name in Link Text Box.
4.Select New Action Button and Go to Navigate to BI Content
5.Choose your Report from your path and click ok button
6.Enable Open Link in New Window(IMP) and click ok.
7.save and check your dashboard page...
thanks,
kavi
Edited by: Kavitha on Jul 12, 2011 12:11 PM
Edited by: Kavitha on Jul 12, 2011 12:12 PM

New to OBIEE 11g

Similar Messages

Maybe you are looking for