New to Oracle IDM.

Hi Friends,
I got trained in SUN IDM and i am new to oracle IDM. I didn't find any documents and software to download and get trained myself.Will you guys give me idea where i can get documents and get trained myself.Also will you guys let me know the installable document and software.
If you have any dumps too pls fwd to my email : [email protected]
Thanks ........

Download link:
http://www.oracle.com/technology/software/products/ias/htdocs/101401.html
Example to follow:
http://www.oracle.com/technology/obe/fusion_middleware/im1014/oim/index.html
Docs:
http://download.oracle.com/docs/cd/E14049_01/index.htm

Similar Messages

Application hangs on first login - First run - Oracle IdM

HI,
I am new to Oracle IdM (Xellerate). Just finished setting up my install (Win 2003 SP1, SQL 2000 sp3a, OIDM 9.0.1, JBoss 4.0.2, JDK 5.0).
When I try to login to the xlWebAp using xelsysadm/xelsysadm, my server console hangs after displaying
[XLJobStore] Handling 14 triggers that missed their scheduled fire time
Is this normal? Am I missing something here?
Thanks in advance.
Dheels.
Message was edited by:
full_dheels

Restarted app server. Problem solved. Must be some sort of bug.

Clarification on Prerequisite components for Oracle IDM 11gR2PS2

I am new to Oracle Fusion Middleware. However, I am familiar with IDM concepts of a different vendor.
I started with installation documentation and would like to have clarification on IDM components (Includes OAM, OAAM, OIM, OSTS, OES, OIN, OUD, OIF, ESSO, OIC, OPAM). While referring "Oracle Identity and Access Management 11g Release 2 (11.1.2.x) Certification Matrix", first section describes system requirements which tells us about supported "Processor type, OS Version, OS 32/64 Bit, Database" etc for 11gR2PS2 (11.1.2.2.0). "ID&Access" tab tells about LDAP supported for specific component(s).
Notes -
"Some Oracle Identity and Access Management components require an Oracle Database. Ensure that you have an Oracle Database installed on your system before installing Oracle Identity and Access Management. The database must be up and running to install the relevant Oracle Identity and Access Management component. The database does not have to be on the same system where you are installing the Oracle Identity and Access Management component."
I am aware of the fact that configuration will be difficult in these type of architecture I mention below and it is not recommended. Moreover, I will not be able to use RCU. Let's ignore the configuration part for a while.
As mentioned above, when I went through first section it says, database supported for Identity Management 11gR2PS2 (11.1.2.2.0) is "Oracle Database". Whereas in the section which specifies about the supported LDAP type, specification are as below -
(for ease of understanding I have just take two components from the IDM suite).
OAM - Oracle Internet Directory
        - Oracle Virtual Directory
        - Microsoft Active Directory 2008,
        - Novell eDirectory 8.8,
        - IBM Tivoly Directory Server 6.3
        - And as per list...
Whereas, OIM Server supports,
OIM - Oracle Internet Directory,
       - Oracle unified Directory,
       - Microsoft Active Directory 2008
However, I do not find Novell eDirectory or IBM Tivoli Directory server in the LDAP supported list for OIM Server.
My Question is,
In the list of supported database, it has been listed as "Oracle Database" everywhere. Whereas support for LDAP type we have option(s) from different vendors. Does this mean that if I plan to use LDAP something other than Oracle Internet Directory / Oracle unified Directory / Oracle Virtual Directory, my database should be 'Oracle Database' only ?
Scenario 1 - I want to use OAM server and since OAM supports LDAP from Microsoft, IBM, Novell.
Can I go for IBM Tivoli Directory Server as LDAP type and IBM DB2 as database type ?
                                                or
IBM DB2 as database type and Oracle Internet Directory / Oracle Unified Directory ?
                                                or
(If deploying on Windows system) Microsoft SQL server as database type and Microsoft Active Directory 2008 as LDAP type ?
Or is it Mandate that my database should be "Oracle Database" irrespective of LDAP (IBM TDS / Microsoft Active Directory / Novell eDirectory) I select.
Scenario 2 - I want to use OIM server and apart from Oracle Internet Direcotry / Oracle Unified Directory it only supports Microsoft Active Directory 2008 as per list.
Does this mean that if I use 'OIM Server' component of Oracle IDM 11gR2PS2 (11.1.2.2.0),
My database will be 'Oracle Database' and as a option for LDAP I have Microsoft Active Direcotry 2008 ? Yes, We have Oracle Unified Directory if we don't opt for Microsoft Active Directory.
                                                                    or
If I plan to use Microsoft Active Directory 2008 as my LDAP can I use Microsoft SQL server as database ? Or Should I use "Oracle Database" only ?
And, the OIM components doesn't support IBM's DB2 or IBM's Directory server / Novell eDirectory. ?

Any OIM experts, can you guys help!!

Oracle idm client install

How can we install ORAcle idm xlclient.
We are new at IDM.
We couln't find documantation about that and download link.
Thanks...

Thanks.
We tried your recommandation but setup client not working.
We are using windows XP.
Run setup. A commant prompt open, some character apears then close suddenly. We can't even read this charakter. So nothing heppens.
How we can solve this problem?=
Thanks.

Which IDM is more in demand in IT Industry, CA IDM or Oracle IDM

Hi,
I am completely new to Identity Management. My company will train me either on CA IDM or Oracle IDM.
I just wanted to know which IDM is in more demand from IDM professional point of view.
Down the line 3 to 4 years from now, which IDM will give me greater opportunities from career point of view.
Thanks and Regards,
Biswa

Oracle IDM.

How to do it? Need help in syntax - new to Oracle syntax

create or replace
PROCEDURE "SP_SAMPLE_data" (prodName in VARCHAR2) AS
where_criteria char(100);
BEGIN
if prodName = 'A' then
I want to build the where criteria string as “product_name in (‘iPod’,’iPad’)”
else
I want to build the where criteria string as “product_name = directly read from the passed variable(prodName)”
end if;
select *
from “MySchema”.”MyTable”
where where_criteria concatenated here – do not know how to concatenate;
END SP_SAMPLE_data;
New to Oracle PL/SQL syntax.
Oracle 10gR2

You could try someting like this
create or replace procedure SP_SAMPLE_data (prodName in VARCHAR2) AS
   where_criteria char(100);
   sql_stmt varchar2(1000);
BEGIN
   if prodName = 'A' then
      -- I want to build the where criteria string as "product_name in ('iPod','iPad')"
      where_criteria := 'product_name in (''iPod'',''iPad'')';
   else
      -- I want to build the where criteria string as
      -- "product_name = directly read from the passed variable(prodName)"
      where_criteria := 'product_name = '''||prodName||'''';
end if;
sql_stmt := 'select * from MySchema.MyTable'||where_criteria;
END SP_SAMPLE_data;I added SQL_STMT variable as I am not sure what do you want to do with SQL statement once it is created. Do you plan to execute it in the procedure or pass it back to the calling environment? If you need to pass it back, then specify SQL_STMT as out parameter.

New to oracle report builder

Dear all;
Please pardon me. I am new to oracle report builder and I am trying to accomplish the following. First and foremost please find my pl/sql queries below. Kindly note, all the queries have been tested and I just need to be able to input those queries into the report builder. Thank you.
create or replace package test1 is
type r_cursor is ref cursor;
function report(company_name in varchar2) return r_cursor;
end test1;
create or replace package body test1 is
function report(company_name in varchar2) return r_cursor as
my_r_cursor r_cursor;
begin
if(company_name = 'ALL COMPANIES') THEN
open my_r_cursor for
select t.t_id, t.t_description from t1 t;
return my_r_cursor;
elsif(company_name != 'ALL COMPANIES') THEN
open my_r_cursor for
select t.t_id, t.t_description from t1 t
where t.t_id = company_name;
return my_r_cursor;
end if;
end;
end test1;
create table t1
t_id varchar2(200) not null,
t_description varchar2(250),
primary key(t_id)
insert into t1
(t_id, t_description)
values
('CITI', 'PROFIT: 2.2Billion');
insert into t1
(t_id, t_description)
values
('GE', 'PROFIT: 1Billion');
insert into t1
(t_id, t_description)
values
('JPMORGAN','PROFIT: 0');Now, I am trying to create a simple report in oracle report builder. The interface for generating for this report is basically, there is a dropdownlist where by the user picks a company name from the dropdownlist and clicks on the go button, this should then generate a report with the above query shown in the package. How can this be achieved? All help will greatly be appreciated.

Hi,
first of all you need strong typed ref cursor, oracle reports need to detect witch are the columns returned by your cursor.
so first you create your package
create or replace package test1
as
TYPE t_record IS RECORD ( company_number PLS_INTEGER--TABLE_NAME.COLUMN_NAME%TYPE
, company_desc VARCHAR2(150)--TABLE_NAME.COLUMN_NAME%TYPE
TYPE T_REF_CURSOR IS REF CURSOR RETURN t_record;
procedure report(company_name in varchar2 ,cur_out OUT t_ref_cursor) ;
end test1;
show errors
create or replace package body test1
is
procedure report(company_name in varchar2 ,cur_out OUT t_ref_cursor)
is
my_r_cursor T_REF_CURSOR;
begin
if(company_name = '1')
THEN
open my_r_cursor for
select 1 as t_id, 'description' ast_description from dual
else
open my_r_cursor for
select 2 as t_id, 'description2' as t_description from dual
end if;
end;
end test1;
show errors
then, in your report you create a ref cursor query :
function QR_1RefCurDS
return test1.t_ref_cursor
is
C_return test1.t_ref_cursor;
begin
test1.report(1,C_return);
RETURN(C_return) ;
end;
hope this helps you !
E

Forms installation problem - how do I create a new default Oracle home?

I am new to Oracle so please forgive my utter ignorance. My impression of Oracle because of how an installation
has to be done is taking a nosedive. I thought Microsoft was bad with all the re-booting but the explanation that I
read in Anubhav Seth's post about installing Dev 6i before 8i and the suggestion (not a requirement) to format the
harddisk and reinstall Windows just leaves me with my jaw hanging open. I'm having a little trouble swallowing that
one.
Here's my situation... I'm running 8i at home and I am using it for the Oracle courses that I am taking at a local
university. So 8i with its SQL*Plus has been all I have needed to date. Now we have a project to do that involves forms.
So I go to the OTN page for downloads and downloaded file 6irel2nt.exe which is 264 MB in size. This file, I assume,
has forms in it -- what else I don't know because things are not explained all that well on the web site or I don't know
where to look (which implies poor organization of the web pages).
I run the 6irel2nt.exe file and end up with 11,128 new files on my computer. That's nice. I run the setup file and a step or
two into it it complains that my 'Ora81' home is already being used and that I need to install it into another Oracle Home.
Now I'm trying to find out how I create another Oracle Home. I perform a search in GOOGLE on "creat default Oracle
home" and basically get nowhere. My $50+ "Oracle 8i A Beginner's Guide" from Oracle Press mentions Oracle Home
on one page (pg. 170) but is completely useless in this case. My $184 worth of Oracle University manuals (which
are really PowerPoint slides) is useless too. My next step will be to comb through the FAQs. All this because I cannot
believe that I have to totally uninstall one product to get another to install and then reinstall the first one. That is INSANE!
If I have gone way off track please feel free to blast me but if this is true then all I can say is that the folks at Oracle need
a lesson in KISS (Keep It Simple Stupid)! Computers and computer software are supposed to make our lives simpler
not complicate the holy hell out of them. I'll get off my soapbox now. Sorry about the whining.

I ended up uninstalling 8i and then I installed Dev 6i (Forms) and then I reinstalled 8i. I had some problems
installing Dev 6i because of this error "path.vrf(86): Unbound variable 'path_too_long_prompt'". Right after this error
appears I get a dialog that states, "The Oracle Installer cannot update the system path variable to %new_path%
because it is too long. Please restrict your system path to 127 characters and make sure D:\Oracle\OraWin95\bin
is included in your path."
The path D:\Oracle\OraWin95 was what I set up for this installation.
What I did to work around this problem was this...
(1) Go to Start - Accessories - System Tools - System Information.
(2) Click on the Tools menu
(3) Select System Configuration Utility
(4) Select the Autoexec.bat tab
(5) I added D:\Oracle\OraWin95\bin to my PATH variable and unchecked the checkbox next to one of the several
lines that I have that build my PATH variable. (I have several PATH lines that simply add a path to the system
variable %path%). After the installation is complete you can go back and turn back on the paths that you had disabled.
After installing 8i I did have a problem connecting to the database. I got this error:
Error: ORA-01034 Oracle not available
I believe this happened because I had forgotten to turn back on some of my PATH information that I mentioned
earlier. After checking one of my PATH variables and rebooting, this problem disappeared.
When reinstalling 8i and when the installation asks for an SID and you enter the SID you had used in the original
installation you may get a notice that says the SID already exists. I think this happens because the uninstall does not
clean up the registry totally, so I entered a different one. Later on, after the installation has been completed and you
are connecting to your database, you will be prompted to select an SID -- just make sure that you select the SID from
the latest installation.
I should've mentioned first that in preparing for this whole ridiculous exercise I created a directory under my Oracle
directory that I was going to use as the new 'Oracle home.' So I guess that's all one has to do to create a new Oracle
home -- just have another directory ready to install 'stuff' into.
All in all, this a pretty asinine exercise. Oracle really needs to fix this mess. I honestly thought Microsoft was bad but
this takes the cake. I wonder if SQL Server is this screwed up.

(V9I) ORACLE 9I NEW FEATURE : ORACLE FLASHBACK

제품 : ORACLE SERVER
작성날짜 : 2002-11-01
(V9I) ORACLE 9I New Feature : ORACLE FLASHBACK
==============================================
PURPOSE
Oracle9i 새로운 기능인 Flashback 의 등장으로 Commit 된 Transaction 에 대해
특정 시점의 과거 DATA를 Query가 가능함으로써 Self-service repair 기능이 향상되었다.
다음 Flashback query 기능과 Setup 방법 및 실제 Data Recovery 에 관한 내용에 대해 알아보도록 한다.
Explanation
Flashback : 새로운 기능인 Flahback 은 과거 시점의 consistent view 를 볼 수있는
기능으로 system time or systme change number(SCN) 기반 read-only view이다.
다음은 Flashback 기능을 사용하기 위해 미리 설정해야할 부분에 대해 알아보도록 한다.
1) 반드시 Automatic Undo Management 에서만 가능
(initSID.ora file이나 spfile에 다음 파라미터가 auto로 설정)
UNDO_MANAGEMENT = AUTO
2) Rentention interval 을 두어 해당 time 동안은 inactive rollback 이라 하더라도
overwrite 되지 않도록 유지(초단위)
SQL> ALTER SYSTEM SET undo_retention = 1200;
UNDO_RETENTION 을 지정한 다음 실제 적용을 위해 5분정도 기다려야 한다.
3) DBMS_FLASHBACK package를 이용하여 Flashback 기능을 enable 시킨다.
SQL> call dbms_flashback.enable_at_time('9-NOV-01:11:00:00');
Example1. Flashback setup 과 date/time 설정
1) Undo tablespace 생성
SQL> create undo tablespace UNDOTBS datafile
'/database/901/V901/undotbs01.dbf' size 100M;
2) intiSID or spfile 에 다음 파라미터 적용
undo_management=auto
undo_retention=1200
undo_tablespace=UNDOTBS
3) dbms_flashback exeucte 권한 grant
SQL> connect / as sysdba
Connected.
SQL> grant execute on dbms_flashback to testuser;
Grant succeeded.
4) test table 생성
SQL> connect testuser/testuser;
Connected.
SQL> create table emp_flash as select * from scott.emp;
Table created.
SQL> select count(*) from emp_flash;
COUNT(*)
15
5) table 생성후 5분 정도 waiting -> table delete
SQL> delete from emp_flash;
15 rows deleted.
SQL> commit;
Commit complete.
SQL> select count(*) from emp_flash;
COUNT(*)
0
6) flashback 활성화
SQL> execute DBMS_FLASHBACK.ENABLE_AT_TIME(sysdate - 5/1440);
PL/SQL procedure successfully completed.
SQL> select count(*) from emp_flash;
COUNT(*)
15
SQL> execute DBMS_FLASHBACK.DISABLE;
PL/SQL procedure successfully completed.
SQL> select count(*) from emp_flash;
COUNT(*)
0
Example2. Flashback 으로 잃어버린 data recovery
1) test user 생성
SQL> connect testuser/testuser;
Connected.
SQL> create table emp_recover as select * from scott.emp;
Table created.
SQL> select count(*) from emp_recover;
COUNT(*)
15
2) delete table
SQL> VARIABLE SCN_SAVE NUMBER;
SQL> EXECUTE :SCN_SAVE := DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER;
PL/SQL procedure successfully completed.
SQL> PRINT SCN_SAVE
SCN_SAVE
6.4455E+12
SQL> select count(*) from emp_recover;
COUNT(*)
15
SQL> delete from emp_recover;
15 rows deleted.
SQL> commit;
Commit complete.
SQL> select count(*) from emp_recover;
COUNT(*)
0
3) flashback 이용한 data recover
SQL> DECLARE
2 CURSOR FLASH_RECOVER IS
3 select * from emp_recover;
4 emp_recover_rec emp_recover%ROWTYPE;
5 begin
6 DBMS_FLASHBACK.ENABLE_AT_SYSTEM_CHANGE_NUMBER(:SCN_SAVE);
7 open FLASH_RECOVER;
8 DBMS_FLASHBACK.DISABLE;
9 loop
10 FETCH FLASH_RECOVER INTO emp_recover_rec;
11 EXIT WHEN FLASH_RECOVER%NOTFOUND;
12 insert into emp_recover
13 values
14 (emp_recover_rec.empno,
15 emp_recover_rec.ename,
16 emp_recover_rec.job,
17 emp_recover_rec.mgr,
18 emp_recover_rec.hiredate,
19 emp_recover_rec.sal,
20 emp_recover_rec.comm,
21 emp_recover_rec.deptno);
22 end loop;
23 CLOSE FLASH_RECOVER;
24 commit;
25 end;
26 /
PL/SQL procedure successfully completed.
SQL> select count(*) from emp_recover;
COUNT(*)
15
Reference Document
Note. 174425.1
Note. 143217.1
Note. 179851.1

I 'm sorry I can not offer the correct figure since I'm an easy-to-forget guy.
Below is extracted from other's post. wish it helps.
Oracle Security Server ---> 2 questions
High Availability Technology ---> 4 questions
LogMiner Enhancements -> 1 question
Backup & Recovery Enhancements ---> 3 questions
Data Guard ---> 3 questions
Resource Manager Enhancements ---> 2 questions
Online Operations Enhancements ---> 3 questions
Segment Management (Part I) ---> 4 questions
Segment Management (Part II) ---> 3 questions
Performance Improvements ---> 4 questions
Scalable Session Management ---> 2 questions
Real Application Clusters ---> 2 questions
File Management ---> 4 questions
Tablespace Management ---> 4 questions
Memory Management ---> 3 questions
Enterprise Manager Enhancements ---> 2 questions
by the way, I just found an enthusiast (roxylo
) posted a book about the 9i new features. It surely will help

Please help me. I'm new to Oracle.

Hello all
I'm Sean and new to Oracle and wana purse learning Oracle Forms&Reports but to start I need to also learn Oracle DataBase as well.
Please I know you're all busy but HELP me to fix this problem and start learning Oracle.
I've installed oracle DB 10G. XE. without any problem and have been using it everyday BUT I just installed Oracle SQL Dev v. 1.2.1.... and can't creat a new connection. (it's all installed in my compaq laptop using Win XP SP 3).
I've been reading all the comments in forums but I'm still stuck. PLEASE SOME ONE HELP ME.
Learning from all you guys comment I looked at my Listener.ora and it looks like this:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = Shawn_COMPAQ)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
and my sqlnet.ora looks like this:
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES = (NTS)
The tnsnames.ora looks like this:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = SHAWN_COMPAQ)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
from looks of it comparing to what I have seen in ppl's comments and copy&past of files in forums, my 3 files all looks weird and I guess it missing lot of things.
when I try to create a new connection to see built-in schema (HR) all though it's unlocked but sql dev can't establishes a connection.
In New \ Select database connection window for following fields iI put:
Hostname = localhost:1521:orcl (I 've tried just putting localhost)
Port = 1521
SID = orcl
In my browser when I am in home page of DB 10g XE the URL reads: http://127.0.0.1:8080/apex/f?p=4500:1000:4313426409493576
When i put hostname = localhost (or either 127.0.0.1) and port = 1521 and SID = orcl, I'm getting error :
status: failure-listener refused the connection with following error - ORA-12505, TNS: listener doesn't currently know of SID given in connect descriptor The connection descriptor used by client was: localhost:1521:orcl .
When I just change the Port to 8080 I get the error:
Status: failure-Io Exception: Got minus one from a read call.
By default DB 10g XE installed in: C:\oraclexe\app\oracle\product\10.2.0\.............
and all the mentioned files (3 files mentioned above) are in: C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN
Please I know you're all busy but HELP me to fix this problem.
God bless you.
tnx
Sean

Thanks a lot.
Yes. It works well now.
In it's documentation it says put orcl for SID but never thought to try default xe.
You're the man.
tnx

Hi, i am new to oracle, SQL DEVELOPER:- ERROR:- ORA-01918

Hi,
I am new to oracle, and i have installed Oracle database 12c enterprise edition, and oracle jdeveloper 12c for adf web application development,
I created a database and a new connection in it using sql developer, however while trying to create new user with the name db1 by right clicking on other users. by following the instructions in oracle documentation site. i get the error that new user db1 doesnt exist, and gives error:- ORA-01981. i even tried by changing the username as i thought may be it doesnt support alphanumeric name, but still i get the same error.
So please tell me how to create a new user. is there any way to get out of this ora:-01918, as i googled and it says this is a bug.
My os is win 7 x64(amd processor ).
Thank you
Baldwin

A new user (called a schema in Oracle) is created using the CREATE USER SQL command. You need to be signed in as the SYS schema/user or as a schema that has been granted the rights to create schemas.
12c database comes in two basic flavours. Container database (containing pluggable databases). Standard database. If connected to a container database, you cannot create standard user schemas - you need to be connected to a pluggable database.
Also, your question has no relevance to either the SQL or PL/SQL languages - the subject matter of this forum. Please repost your question to a more appropriate forum dealing with SQL-Developer issues.

Oracle IdM integration with Microsoft ILM 2007/FIM 2010

We currently have ILM 2007 in our environment with limited usage at the moment. We are looking at purchasing Oracle Identity Manager to implement an enterprise wide IAM solution.
We were wondering if it is possible to continue using ILM like a middleware between our AD forests and the Oracle IdM. Where the Oracle IdM is the overarching IAM solution and Microsoft ILM 2007/FIM 2010 is like the metadirectory for our AD forests.
Is this possible without installing the Oracle Management Connector on any of our DCs and using ILM as the directory that Oracle IdM connects to. All AD account provisioning/de-provisioning, acct updates, password sync/reset will be initiated from the Oracle IdM to ILM and then implemented on AD. In order words no direct interaction with AD domain controllers from Oracle IdM, everything will go to ILM and ILM in turn applies it to AD.
Is this possible?
Is there a custom connector that will work with ILM 2007/FIM 2010
Is this a simple customization or something that can be problematic and expensive?
Any feedback is much appreciated
Thanks

user1106726 wrote:
We currently have ILM 2007 in our environment with limited usage at the moment. We are looking at purchasing Oracle Identity Manager to implement an enterprise wide IAM solution.
We were wondering if it is possible to continue using ILM like a middleware between our AD forests and the Oracle IdM. Where the Oracle IdM is the overarching IAM solution and Microsoft ILM 2007/FIM 2010 is like the metadirectory for our AD forests.
Is this possible without installing the Oracle Management Connector on any of our DCs and using ILM as the directory that Oracle IdM connects to. All AD account provisioning/de-provisioning, acct updates, password sync/reset will be initiated from the Oracle IdM to ILM and then implemented on AD. In order words no direct interaction with AD domain controllers from Oracle IdM, everything will go to ILM and ILM in turn applies it to AD.
Is this possible?yes
>
Is there a custom connector that will work with ILM 2007/FIM 2010Yes, if you write one you will have a custom connector
>
Is this a simple customization or something that can be problematic and expensive?It won't be simple. Problematic and expensive maybe, depends on how good you are with OIM and ILM

New in oracle webcenter

Hi , i am new in oracle webcenter .I am quite confuse now .Can anyone tell me what software should i need to install to try the oracle webcenter? I has already download Oracle Jdeveloper, Weblogic , Database ,Webcenter suite and Oracle RCU. Is it compulsory to install all the software on my PC? So far I am using window 7 64 bit.
In addition , can anyone give me some note which are best for the newbie to try the oracle webcenter?
I know this question is quite stupid. Special thanks to anyone who help me :)

You don't need to install all that software if you want to test the basic functionality of WebCenter.
JDeveloper is the IDE that you will be using to develop the portal. When you have installed Jdev, go to Help, Check for updates and look for the WebCenter extensions. Download and install them.
JDeveloper will than restart and when you create a new application you will see additional templates:
WebCenter Portal application: this is the template that allows you to create a portal with webcenter
Portlet producer: this template will create an application that allows you to create JSR 286 portlets that can be consumed in a webcenter portal or any other JEE portal with WSRP support.
The webcenter extensions do not contain the webcenter services like document services, discussion forums, activity streams and so on. If you also want to test them out, than you will need to install weblogic + webcenter suite.
A good start is the tutorial. I am currently in the procces of writing one. Currently i only have finished 2 parts but it's a start :)
http://www.yonaweb.be/webcenter_tutorial/introduction
You will also find lots of other examples and articles on my blog :)
You can also download the prebuild VM from Oracle: http://www.oracle.com/technetwork/middleware/webcenter/downloads/owcs-portalfw-vbox-284132.html
This VM does contain a full installation of the webcenter portal framework with the services (webcenter spaces is not installed on this VM).
And this is the tutorial from Oracle: http://download.oracle.com/docs/cd/E17904_01/webcenter.1111/e10273/toc.htm

New In Oracle Form

Hi,
I am new in oracle form and i need material for study and if possible someone have ready framework.
Thanks,

Well, there is certainly no shortage of reading material available. The question you need to ask yourself is "what do I already know". In other words, it would be helpful if you understood the basics of how a web server works (specifically Apache) and how web content is deployed. For example, just a simply web page. This information will help you to better understand how your Forms application will run.
Then, to get an understand of the Oracle Forms product you can start by reviewed the documents found in the Overview section of this page:
http://www.oracle.com/technetwork/developer-tools/forms/documentation/techlisting11gr1-086315.html
The product document library will cover deployment and installation:
http://docs.oracle.com/cd/E24269_01/index.htm

New in Oracle Web form 9i : How to run fmx from web and login

oracle form 9i from web.
I am new in oracle form 9i (web form). Before I use oracle form client 6i. Just set icon with command (D:\ora6i\BIN\ifdbg60.EXE MYFORM.FMX). The login will be prompt out and user can log in to run many oracle 6i forms from oracle menu. In Oralce form 9i designer, I can open form designer and use run form from IE.
1. How can I depoly these form with menu to other users.
2. How can I define the url link to public (Application Server)?
3. SHould there is any login prompt from web usage.
Tks.

solved.

New to Oracle IDM.

Similar Messages

Maybe you are looking for