New to Oracle (ora-03134)

I have an application that I need to connect to an old Oracle db. The application is working on the server where the Oracle db is running but requires some updates (I do not have the ability to run or change code on the server). I have setup a web server on my laptop and am trying to duplicate the original code base and get connected to the Oracle server db. I have tried the original code and always receive the same error code ora-03134 "Connections to this server version are no longer supported". I have tried some connection debug tools and get the same error.
How do I determine the version of the server? How do I debug the connection dialog in order to determine the changes needed to make it work?

Unfortunately connection is my difficulty. Here is what I believe to be the case:
Server Version 7.3.4
My client version depends on what piece you are asking about. The scripts are php so I have a php_oci8.dll extention loaded in the UniformServer version 3.5, along with that have
instantclient-basic-win32-10.2.0.3-20061115.zip
and
instantclient-sqlplus-win32-10.2.0.3-20061115.zip
loaded. I do realize that the versions are very far apart but have not found any specific evidence that these are uncompatible. The only evidence I have is the error message. I have spent some time looking for earlier versions of the php extention, instant client, and sqlplus without any luck.

Similar Messages

Hi, i am new to oracle, SQL DEVELOPER:- ERROR:- ORA-01918

Hi,
I am new to oracle, and i have installed Oracle database 12c enterprise edition, and oracle jdeveloper 12c for adf web application development,
I created a database and a new connection in it using sql developer, however while trying to create new user with the name db1 by right clicking on other users. by following the instructions in oracle documentation site. i get the error that new user db1 doesnt exist, and gives error:- ORA-01981. i even tried by changing the username as i thought may be it doesnt support alphanumeric name, but still i get the same error.
So please tell me how to create a new user. is there any way to get out of this ora:-01918, as i googled and it says this is a bug.
My os is win 7 x64(amd processor ).
Thank you
Baldwin

A new user (called a schema in Oracle) is created using the CREATE USER SQL command. You need to be signed in as the SYS schema/user or as a schema that has been granted the rights to create schemas.
12c database comes in two basic flavours. Container database (containing pluggable databases). Standard database. If connected to a container database, you cannot create standard user schemas - you need to be connected to a pluggable database.
Also, your question has no relevance to either the SQL or PL/SQL languages - the subject matter of this forum. Please repost your question to a more appropriate forum dealing with SQL-Developer issues.

[S1000][unixODBC][Oracle][ODBC][Ora]ORA-03134: Connections to this server version are no longer supported

Hello,
I'm using unixODBC with ODBC Oracle client 11 (Debian 7) to connect to Oracle database version 9.2.0.6 (Solaris 10), but show me this message:
[S1000][unixODBC][Oracle][ODBC][Ora]ORA-03134: Connections to this server version are no longer supported.
Note: I can connect to Oracle database version 10+.
Please can you help me.
Thank you

Are you positive you're using version 11 Oracle client and 9206 database? That combination should work, and Ive never seen that error message occur for anything but the expected reason.
If you have MOS access you can check the client/database compatibility with the following note:
Client / Server / Interoperability Support Matrix For Different Oracle Versions (Doc ID 207303.1)
Hope it helps,
Greg

TOAD 8.5 with Oracle Instant Client 10: ORA-03134

Hi,
I have tried TOAD 8.5.0.50 and also TOra 1.3.16 to connect to the database via Oracle Instant Client 10, but I am restricted with this error message:
"ORA-03134: Connections to this server version are no longer supported."
Does anyone have any idea what is wrong? Earlier version of TOAD works alright. We are using Oracle 8i. Are there any compatibility issues between Oracle database version with Oracle Instant Client version?
Thanks.

Just want to share with everyone. This is a reply that I got from another forum:
this is a oracle bug!
connections with the 10g client are supported to 8.1.7.0 and above.
the bug in the client causes this error.
you are only able to connect to 8.1.7.4 and above.
i made a service request but oracle is not able to patch the
instant client.
you have to use 10.1.0.3 client or above
Regards.

[Oracle][ODBC][Ora] ORA-03134: ...server version no longer supported

Hello
I am new to oracle and am trying to connect via VS2010 to an oracle database and get the error Connections to this server version are no longer supported.
Having googled it looks like 8.1.7+ are supported by the 11g instant client so I have to assume my version is below that (the best I know is that it is 8.1.x)
Given I cannot updtae the database to another version and have little interest from IT for help - is there an older client version I can download to connect?
Many thanks in advance!

Hi,
Please post your question in the appropriate forum.
ODBC
ODBC
Thanks,
Hussein

Forms installation problem - how do I create a new default Oracle home?

I am new to Oracle so please forgive my utter ignorance. My impression of Oracle because of how an installation
has to be done is taking a nosedive. I thought Microsoft was bad with all the re-booting but the explanation that I
read in Anubhav Seth's post about installing Dev 6i before 8i and the suggestion (not a requirement) to format the
harddisk and reinstall Windows just leaves me with my jaw hanging open. I'm having a little trouble swallowing that
one.
Here's my situation... I'm running 8i at home and I am using it for the Oracle courses that I am taking at a local
university. So 8i with its SQL*Plus has been all I have needed to date. Now we have a project to do that involves forms.
So I go to the OTN page for downloads and downloaded file 6irel2nt.exe which is 264 MB in size. This file, I assume,
has forms in it -- what else I don't know because things are not explained all that well on the web site or I don't know
where to look (which implies poor organization of the web pages).
I run the 6irel2nt.exe file and end up with 11,128 new files on my computer. That's nice. I run the setup file and a step or
two into it it complains that my 'Ora81' home is already being used and that I need to install it into another Oracle Home.
Now I'm trying to find out how I create another Oracle Home. I perform a search in GOOGLE on "creat default Oracle
home" and basically get nowhere. My $50+ "Oracle 8i A Beginner's Guide" from Oracle Press mentions Oracle Home
on one page (pg. 170) but is completely useless in this case. My $184 worth of Oracle University manuals (which
are really PowerPoint slides) is useless too. My next step will be to comb through the FAQs. All this because I cannot
believe that I have to totally uninstall one product to get another to install and then reinstall the first one. That is INSANE!
If I have gone way off track please feel free to blast me but if this is true then all I can say is that the folks at Oracle need
a lesson in KISS (Keep It Simple Stupid)! Computers and computer software are supposed to make our lives simpler
not complicate the holy hell out of them. I'll get off my soapbox now. Sorry about the whining.

I ended up uninstalling 8i and then I installed Dev 6i (Forms) and then I reinstalled 8i. I had some problems
installing Dev 6i because of this error "path.vrf(86): Unbound variable 'path_too_long_prompt'". Right after this error
appears I get a dialog that states, "The Oracle Installer cannot update the system path variable to %new_path%
because it is too long. Please restrict your system path to 127 characters and make sure D:\Oracle\OraWin95\bin
is included in your path."
The path D:\Oracle\OraWin95 was what I set up for this installation.
What I did to work around this problem was this...
(1) Go to Start - Accessories - System Tools - System Information.
(2) Click on the Tools menu
(3) Select System Configuration Utility
(4) Select the Autoexec.bat tab
(5) I added D:\Oracle\OraWin95\bin to my PATH variable and unchecked the checkbox next to one of the several
lines that I have that build my PATH variable. (I have several PATH lines that simply add a path to the system
variable %path%). After the installation is complete you can go back and turn back on the paths that you had disabled.
After installing 8i I did have a problem connecting to the database. I got this error:
Error: ORA-01034 Oracle not available
I believe this happened because I had forgotten to turn back on some of my PATH information that I mentioned
earlier. After checking one of my PATH variables and rebooting, this problem disappeared.
When reinstalling 8i and when the installation asks for an SID and you enter the SID you had used in the original
installation you may get a notice that says the SID already exists. I think this happens because the uninstall does not
clean up the registry totally, so I entered a different one. Later on, after the installation has been completed and you
are connecting to your database, you will be prompted to select an SID -- just make sure that you select the SID from
the latest installation.
I should've mentioned first that in preparing for this whole ridiculous exercise I created a directory under my Oracle
directory that I was going to use as the new 'Oracle home.' So I guess that's all one has to do to create a new Oracle
home -- just have another directory ready to install 'stuff' into.
All in all, this a pretty asinine exercise. Oracle really needs to fix this mess. I honestly thought Microsoft was bad but
this takes the cake. I wonder if SQL Server is this screwed up.

(V9I) ORACLE 9I NEW FEATURE : ORACLE FLASHBACK

제품 : ORACLE SERVER
작성날짜 : 2002-11-01
(V9I) ORACLE 9I New Feature : ORACLE FLASHBACK
==============================================
PURPOSE
Oracle9i 새로운 기능인 Flashback 의 등장으로 Commit 된 Transaction 에 대해
특정 시점의 과거 DATA를 Query가 가능함으로써 Self-service repair 기능이 향상되었다.
다음 Flashback query 기능과 Setup 방법 및 실제 Data Recovery 에 관한 내용에 대해 알아보도록 한다.
Explanation
Flashback : 새로운 기능인 Flahback 은 과거 시점의 consistent view 를 볼 수있는
기능으로 system time or systme change number(SCN) 기반 read-only view이다.
다음은 Flashback 기능을 사용하기 위해 미리 설정해야할 부분에 대해 알아보도록 한다.
1) 반드시 Automatic Undo Management 에서만 가능
(initSID.ora file이나 spfile에 다음 파라미터가 auto로 설정)
UNDO_MANAGEMENT = AUTO
2) Rentention interval 을 두어 해당 time 동안은 inactive rollback 이라 하더라도
overwrite 되지 않도록 유지(초단위)
SQL> ALTER SYSTEM SET undo_retention = 1200;
UNDO_RETENTION 을 지정한 다음 실제 적용을 위해 5분정도 기다려야 한다.
3) DBMS_FLASHBACK package를 이용하여 Flashback 기능을 enable 시킨다.
SQL> call dbms_flashback.enable_at_time('9-NOV-01:11:00:00');
Example1. Flashback setup 과 date/time 설정
1) Undo tablespace 생성
SQL> create undo tablespace UNDOTBS datafile
'/database/901/V901/undotbs01.dbf' size 100M;
2) intiSID or spfile 에 다음 파라미터 적용
undo_management=auto
undo_retention=1200
undo_tablespace=UNDOTBS
3) dbms_flashback exeucte 권한 grant
SQL> connect / as sysdba
Connected.
SQL> grant execute on dbms_flashback to testuser;
Grant succeeded.
4) test table 생성
SQL> connect testuser/testuser;
Connected.
SQL> create table emp_flash as select * from scott.emp;
Table created.
SQL> select count(*) from emp_flash;
COUNT(*)
15
5) table 생성후 5분 정도 waiting -> table delete
SQL> delete from emp_flash;
15 rows deleted.
SQL> commit;
Commit complete.
SQL> select count(*) from emp_flash;
COUNT(*)
0
6) flashback 활성화
SQL> execute DBMS_FLASHBACK.ENABLE_AT_TIME(sysdate - 5/1440);
PL/SQL procedure successfully completed.
SQL> select count(*) from emp_flash;
COUNT(*)
15
SQL> execute DBMS_FLASHBACK.DISABLE;
PL/SQL procedure successfully completed.
SQL> select count(*) from emp_flash;
COUNT(*)
0
Example2. Flashback 으로 잃어버린 data recovery
1) test user 생성
SQL> connect testuser/testuser;
Connected.
SQL> create table emp_recover as select * from scott.emp;
Table created.
SQL> select count(*) from emp_recover;
COUNT(*)
15
2) delete table
SQL> VARIABLE SCN_SAVE NUMBER;
SQL> EXECUTE :SCN_SAVE := DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER;
PL/SQL procedure successfully completed.
SQL> PRINT SCN_SAVE
SCN_SAVE
6.4455E+12
SQL> select count(*) from emp_recover;
COUNT(*)
15
SQL> delete from emp_recover;
15 rows deleted.
SQL> commit;
Commit complete.
SQL> select count(*) from emp_recover;
COUNT(*)
0
3) flashback 이용한 data recover
SQL> DECLARE
2 CURSOR FLASH_RECOVER IS
3 select * from emp_recover;
4 emp_recover_rec emp_recover%ROWTYPE;
5 begin
6 DBMS_FLASHBACK.ENABLE_AT_SYSTEM_CHANGE_NUMBER(:SCN_SAVE);
7 open FLASH_RECOVER;
8 DBMS_FLASHBACK.DISABLE;
9 loop
10 FETCH FLASH_RECOVER INTO emp_recover_rec;
11 EXIT WHEN FLASH_RECOVER%NOTFOUND;
12 insert into emp_recover
13 values
14 (emp_recover_rec.empno,
15 emp_recover_rec.ename,
16 emp_recover_rec.job,
17 emp_recover_rec.mgr,
18 emp_recover_rec.hiredate,
19 emp_recover_rec.sal,
20 emp_recover_rec.comm,
21 emp_recover_rec.deptno);
22 end loop;
23 CLOSE FLASH_RECOVER;
24 commit;
25 end;
26 /
PL/SQL procedure successfully completed.
SQL> select count(*) from emp_recover;
COUNT(*)
15
Reference Document
Note. 174425.1
Note. 143217.1
Note. 179851.1

I 'm sorry I can not offer the correct figure since I'm an easy-to-forget guy.
Below is extracted from other's post. wish it helps.
Oracle Security Server ---> 2 questions
High Availability Technology ---> 4 questions
LogMiner Enhancements -> 1 question
Backup & Recovery Enhancements ---> 3 questions
Data Guard ---> 3 questions
Resource Manager Enhancements ---> 2 questions
Online Operations Enhancements ---> 3 questions
Segment Management (Part I) ---> 4 questions
Segment Management (Part II) ---> 3 questions
Performance Improvements ---> 4 questions
Scalable Session Management ---> 2 questions
Real Application Clusters ---> 2 questions
File Management ---> 4 questions
Tablespace Management ---> 4 questions
Memory Management ---> 3 questions
Enterprise Manager Enhancements ---> 2 questions
by the way, I just found an enthusiast (roxylo
) posted a book about the 9i new features. It surely will help

Please help me. I'm new to Oracle.

Hello all
I'm Sean and new to Oracle and wana purse learning Oracle Forms&Reports but to start I need to also learn Oracle DataBase as well.
Please I know you're all busy but HELP me to fix this problem and start learning Oracle.
I've installed oracle DB 10G. XE. without any problem and have been using it everyday BUT I just installed Oracle SQL Dev v. 1.2.1.... and can't creat a new connection. (it's all installed in my compaq laptop using Win XP SP 3).
I've been reading all the comments in forums but I'm still stuck. PLEASE SOME ONE HELP ME.
Learning from all you guys comment I looked at my Listener.ora and it looks like this:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = Shawn_COMPAQ)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
and my sqlnet.ora looks like this:
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES = (NTS)
The tnsnames.ora looks like this:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = SHAWN_COMPAQ)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
from looks of it comparing to what I have seen in ppl's comments and copy&past of files in forums, my 3 files all looks weird and I guess it missing lot of things.
when I try to create a new connection to see built-in schema (HR) all though it's unlocked but sql dev can't establishes a connection.
In New \ Select database connection window for following fields iI put:
Hostname = localhost:1521:orcl (I 've tried just putting localhost)
Port = 1521
SID = orcl
In my browser when I am in home page of DB 10g XE the URL reads: http://127.0.0.1:8080/apex/f?p=4500:1000:4313426409493576
When i put hostname = localhost (or either 127.0.0.1) and port = 1521 and SID = orcl, I'm getting error :
status: failure-listener refused the connection with following error - ORA-12505, TNS: listener doesn't currently know of SID given in connect descriptor The connection descriptor used by client was: localhost:1521:orcl .
When I just change the Port to 8080 I get the error:
Status: failure-Io Exception: Got minus one from a read call.
By default DB 10g XE installed in: C:\oraclexe\app\oracle\product\10.2.0\.............
and all the mentioned files (3 files mentioned above) are in: C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN
Please I know you're all busy but HELP me to fix this problem.
God bless you.
tnx
Sean

Thanks a lot.
Yes. It works well now.
In it's documentation it says put orcl for SID but never thought to try default xe.
You're the man.
tnx

Please need help in ora-03134

Good Day
i'm using oracle database Release 10.2.0.1.0 and need to connect to release 8 when config the Net Configuration Assistant and connect to sql*plus error ora-03134 ,then download patch 10.2.0.5.0 PATCH SET FOR ORACLE DATABASE SERVER and the error still existing .
Please i'm not want to upgrate release 8
Please need help

Hi,
could you check
http://forums.oracle.com/forums/thread.jspa?threadID=855541
*Bug 3437884 - 10g client cannot connect to 8.1.7.0 - 8.1.7.3 server [ID 3437884.8]*
Edited by: CKPT on Aug 20, 2010 3:45 PM

New To Oracle.. Needs Help:: Conversion from SQL Server to Oracle 11g

I am new to Oracle 11g and badly need the conversion of SQL Server Functions to Oracle.. Sample Pasted Code not working .. end with error.. pls help
Create Table TempT (ID1 Varchar (10),
ID2 Varchar (10)
CREATE OR REPLACE PACKAGE GLOBALPKG
AS
TYPE RCT1 IS REF CURSOR;
TRANCOUNT INTEGER := 0;
IDENTITY INTEGER;
END;
CREATE OR REPLACE FUNCTION fTempT
i IN VARCHAR2 DEFAULT NULL
RETURN GLOBALPKG.RCT1
IS
REFCURSOR GLOBALPKG.RCT1;
BEGIN
OPEN REFCURSOR FOR
SELECT TT.*
FROM TempT TT
WHERE (fTempT.i = ''
OR TT.ID1 = fTempT.i)
RETURN REFCURSOR;
END;
CREATE OR REPLACE FUNCTION fTempTF
i IN VARCHAR2 DEFAULT NULL
RETURN GLOBALPKG.RCT1
IS
REFCURSOR GLOBALPKG.RCT1;
BEGIN
OPEN REFCURSOR FOR
SELECT *
FROM TABLE(fTempT(i))
RETURN REFCURSOR;
END;
LAST FUNCTION ENDs WITH ERROR
Error(13,7): PL/SQL: ORA-22905: cannot access rows from a non-nested table item

2. The major purpose is to get a simplest way to create a parameterized function who can return a table like output. 2nd function has no use instead i was testing the result of First Function like thisIf you just want to select from a select, you should use a view not a function.
1. which program is more help ful for writing and executing queries bcoz after using Query Analyzer of Microsoft It seems difficult to work on SQL Developer.
sqlplus? If you are having difficulty learning new tools because of an old one you used, probably best to forget the old one and concentrate on learning the new one because it will be different. This goes for the database itself also.
2. Can DMLs be used within a Function.Yes, you just can't execute the function in another SQL statement if it modifies data and this is a good thing.
3. Can temporary tables be used within a function.Unfortunately yes, but they shouldn't be unless you are in a slowest application competition.
5. Each Function which is a Table Function must be accompanied with Type Definitions?? its a bit longer way of doing the things than SQL ServerThat is why it is better to use views instead, is there any reason you want a select that you can select from inside a function?
SQL Server for last 9 years thats why i refer this toolThat is not in itself a problem, if you try and do what you did in SQLServer in Oracle, that will be a problem though.

ORA-03134 error

Hi everybody,
I have installed on my laptop Oracle 8.1.6.0.0 Enterprise Edition, and after that Oracle 10.2.0.1 Enterprise Edition, and the two versions of Oracle are installed under the same operating system (which is XP SP2). When I use TOAD, I can connect to Oracle 8.1.6.0.0 database and to Oracle 10.2.0.1 database also. But when I use PowerBuilder 9.0 Enterprise Version to connect to Oracle 8.1.6.0.0 database , I have the error ORA-03134 "Connections to this server version are no longer supported". I "googled" for this ORA-03134 error , and the articles I saw say that this error is due to the fact that the 10g client can not connect to the 8i server. My question is the following: how to do so that when I use PowerBuilder 9.0 it's the 8i client -and not the 10g client- which connects to
the 8i server (because it seems like the error I have when I want to connect to Oracle 8.1.6.0.0 from PowerBuilder 9.0 is due to the fact that in this case it's 10g client which tries to connect to the 8i database).
Thanks in advance for your answers.

What do you want with 8.1.6? It's desupported and was NEVER supported on XP. Even if the actual problem disappears,I would expect other problems still to arise.
Werner

In Designer, old application system disappears after New version and ORA-01562

In Designer 2.1.2, after starting (RON 2.0.24.1.1) Application / New version,
error ORA-01562 occurred (because I have a smaller rollback segment on line).
Now I can't find in repository
old version (1) of my application system,
but new version (2) exists in repository.
Unchecking the 'Show Current Versions Only' check box doesn't help.
Even Designer API statement:
'SELECT id, name, version
FROM ci_application_systems'
displays only new version (2).
Means this that Designer:
- first changes old version number to new version number and commits
- and then copies new version to old?
How to return old version number (without Designer API)?
Thanks and regards
null

Answer from Oracle
(MetaLink Technical Forums):
'When Designer versions it takes a snapshot of the first version
and then changes the originals version number to 2.
If designer run out of rollback segments while creating a new version
it will not show the old version again.
This is a bug (818860). It is in the resolution stage.'
null

ORA-03134 Dblink Problem

Hello,
Forms 10g running under Oracle RDBMS 10g (Windows XP) gives me this error:
ORA-03134 Connections to this server are no longer supported
The latest patch to Oracle 10g was applied (this supposedly should have corrected the problem).
Has anyone encountered this problem and how did you correct the problem?
Thanks,
gk

ORA-03134: Connections to this server version are no longer supportedThis is not problem, this is correct behaviour because connections to older releases (than 9i) since 10g are not supported. So you need use client <10g
Can download older instantclient version to connect on ?No, instant client was created since 10g. So you need to download regular 9i (R2) client.

Ora-03134 : no longer supported (sqlplus 10.1.0.2.0 to server 8.1.7)

hi.
i want to access by an client instant (10.1.0.2.0) on my linux to a oracle server (8.1.7.0.0) on windows nt.
i donwloaded the basic et sqlplus package from :
* http://otn.oracle.com/software/tech/oci/instantclient/htdocs/linuxsoft.html
then install : don't problem.
but after putting the good variables (tns_admin, path, ld_libray_pathsqlpath) : i launch sqlplus user@data.
And the error message :
"ORA-03134 : connections to this server version are no longer supported".
How to ?
Thanks for any idea.
PS : i don't find any package linux for sqlplus v8...
--st

Hm, I think 10.x requires at least 8.1.7.4 on the other side. (will try it myself evetually, but Oracle 10.x is too soon, at least this year ;))
9i
10g
11e???

Can't compile PHP5.2 with Oracle ORA support, please help!

Hi peoples,
first post on here - hope someone can assist.
I am compiling PHP 5.2 on RedHat Enterprise 4 AS intel 64bit with oracle ORA and LDAP support compiled in. I am using Apache 2.0.52-28 installed from RedHat RPMs.
I am using the following configure line:
./configure with-apxs2=/usr/sbin/apxs with-config-file-path=/etc/httpd/conf with-oracle=/export/oracle/pegasus/product/9.2.0 with-ldap=/usr enable-sigchild enable-libgcc
The only oracle related messages I have found during the configuration are:
checking for Oracle (OCI8) support... no
checking Oracle OCI support for PDO... no
However I am told these are newer methods of Oracle communication protocols and not related to what I am trying to achieve.
After building and installing PHP 5.2, reconfiguring apache httpd.conf and restarting httpd I find that the output of phpinfo.php shows no mention of oracle whatsoever apart from the Configure Command section at the beginning confirming that yes, --with-oracle= was specified.
I have tried setting ORACLE_HOME=/export/oracle/pegasus/product/9.2.0 environment variable before running ./configure but to no avail.
I have also tried adding various Oracle environment variables to my startup scripts for Apache, also to no avail.
Any ideas? I am really under the pump to get this sorted as it is for a new production server here and I am limited timewise to get it up and running.
Cheers
Andy

Hi Andy,
I have php 5.2 installed on a RH 64 bits so our configurations are almost the same (I use Apache 1.3 and Oracle 10g).
I compiled 5.2 from source succesfully with this instruction:
./configure with-config-file-path=/opt/apache with-libdir=lib64 with-oci8=/opt/oracle/orase/oracle/product/10.2.0/db_1 with-apxs=/opt/apache/bin/apxs --enable-sigchildReplace the required values to match your system and try to see if it works for you.
Let me know how it goes. Any additional problem, I'm glad to help.

New to Oracle (ora-03134)

Similar Messages

Maybe you are looking for