New to Over Clocking

New to OC, and wondering if my system could handle it,...MSI K8N Neo MS-7030 mobo, AMD Athlon64 3700+ "clawhammer" 754 socket, XFX GeForce 6800 XTreme AGP8x 256MB DDR3, Diamond Xtreme Sound card 7.1, Ultra Xconnect 400w PSU, Zalman CNPS9500 w/led CPU cooler,NB low pro MSI cooler, Corsair matched 1GBx2 Pro Series DDR 400 w/ leds, Lite On CD Burner, LG DVD 16x burner w/ Lightscribe, 3.5" floppy, and a 160GB, and 80GB Seagate HDD, 7200 RPM,Windows XP SP2. Have MSI Core Cell chip on mobo, is this good enough for beginners? If not anyone have any pointers. Also my CPU is running at an average 56 degrees F, with the Zalman CNPS9500(@ 2440 RPM's), w/ Arctic Silver 5 thermal grease. Is this normal, have 2 80 mm case fans, (front, back). 2, 80 mm in PSU, xfx VGA card has its own fan, and NB cooler. Thanks.

hello,
well looks fine. you can try and see far can go. your HDD's are Sata or IDE? not sure board got sata lock.
get clockgen, http://www.cpuid.com/download/ClockGen.zip increase cpu htt and see if agp freq will gona change respective or not.
look basic guide here: https://forum-en.msi.com/index.php?topic=40413.0
stability testing tools here: https://forum-en.msi.com/index.php?topic=103598.msg760534#msg760534

Similar Messages

How damaging is it to over clock a device

How damaging is it to over clock a device? I know over clocking is damaging. But is it the extra heat produced, or trying to use the capacitors to fast or something technical. If it is only heat, I can keep my MSI VGA card cool enough to over clock it.
Does a chip start to become damaged or work less effeciantly if you raise the temperature. The card may work better at 5 degrees more temperatur, but does this damage it, or is there a certian temperature range. (I'm guessing temperature damages it only)
I also thought most comanies disapproved of over clocking. Why does MSI seem to encourage it? Is this a bad or good thing?

Quote
Originally posted by Into Eternity
Wonkanoby,
I have to dissagree with you on not overclocking video cards. I've seen 30-40% performance gains on video cards with some added cooling, or bios flashing tricks with no damage to the card. Mess with soldering resistors to VR's then your on your own.
Why not have the best video card for an extra 6months until the next best one comes out. Or run new games on an older video card. That's what makes it worth the effort and the small amount of risk.
If the overclocking/mod is done by someone who has a clue, and the reason to do so is to provide functionality to play games that require a higher frame rate or performance then one could say it may be justified. If one is not experienced in these areas and/or saved forever to obtain a card, overclocking may not be in the best interest to the user. Part of the problem is often many users lack the judgement or are driven to beat the latest benchmarks and end up with a keychain in the process. I can see overclocking towards the end of the lifespan of a high end card, but with todays latest and greatest..I don't see the point.
Heat is the determining factor and the killer to all components, not just higher voltage wich I believe increases heat. Heat causes faster deterioration and shortens the life of any component on a molecular level.

Nokia N85 Over Clocking ...

I think Nokia Company Over Clock Chipset 'ARM 11 369 MHz processor' to get More speed from Cpu ..
but This chipset Made in China whit LOW Quality ...
and Now All N85 cell phone is DUMP ..
No Solution For It ...
all N85 cell phones haw restarting problem For Ever ...
I have suggestion For Nokia Company :
please made new processor for n85 & send to all country ressler to change that for all UNFORTUNATE nokia n85 user
please
Moderator's note:
Unnecessary information removed.
Message Edited by gcpropulser on 07-Jan-2009 03:43 PM

I don't know where the chipset has been manufactured (or who actually made the chips), but there's no reason to believe it'd be overclocked (rather, the usual thing to do to preserve battery life is to run the processors at lower clock speeds than what the hardware is really capable of).
In addition, there's no practical way to replace individual chips on phone circuit boards. You'd need the whole board replaced.

Unable to upgrade the MSI newer version over older version.

I am trying to upgrade MSI newer version over the MSi older version, so i make " Remove previous version =True" as the property of setup.But when i am runing the MSI exe all thing is happening but it is not copying the files to the target
location, Once i click the shortcut created by MSI installer it showing " Please wait while window is configuring the setup" like this and then start copying the files and open the exe.

Hi NAWAB3,
It seems that it is related to the ClickOnce, am I right?
If so, I suggest you post this issue to the forum like this
thread.
http://social.msdn.microsoft.com/Forums/en-US/home?forum=winformssetup
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to create a new user over HTTPS

Hi. I have set up conf.xml and web.xml so that when the user accesses a page in the secure area of the website, then they are taken to a login page where they enter their username and password and the form calls j_security_check on the server. All this happens over SSL as the transport garauntee is CONFIDENTIAL. But how to create a new user over HTTPS? If I have a create new account pages in the secure area of the website, then the only way the user can access these pages is by logging in, but they don't have a login as yet.

An update. It looks that if the auth-constraint section (which lists the roles that can access this area) is missing, then everyone can access the region and it is over HTTPS. So far, the following seems to be working
   <security-constraint>
      <display-name>View My Account</display-name>
      <web-resource-collection>
         <web-resource-name>My Account Area</web-resource-name>
         <url-pattern>/myaccount/*</url-pattern>
      </web-resource-collection>
      <auth-constraint>
         <role-name>myrole</role-name>
      </auth-constraint>
      <user-data-constraint>
         <transport-guarantee>CONFIDENTIAL</transport-guarantee>
      </user-data-constraint>
   </security-constraint>
   <login-config>
      <auth-method>FORM</auth-method>
      <realm-name>Form-Based Authentication Area</realm-name>
      <form-login-config>
         <form-login-page>/newaccount/login.html</form-login-page>
         <form-error-page>/newaccount/loginerr.html</form-error-page>
      </form-login-config>
   </login-config>
   <security-role>
      <role-name>myrole</role-name>
   </security-role>
   <security-constraint>
      <display-name>Create New Account</display-name>
      <web-resource-collection>
         <web-resource-name>New Account Area</web-resource-name>
         <url-pattern>/newaccount/*</url-pattern>
      </web-resource-collection>
      <user-data-constraint>
         <transport-guarantee>CONFIDENTIAL</transport-guarantee>
      </user-data-constraint>
   </security-constraint>

How to over clock a ms-7231

how do i over clock a ms-7231
specs
http://www.msi.com/index.php?func=proddesc&maincat_no=134&cat2_no=&cat3_no=&prod_no=1117

Quote from: PersonalGroups on 28-September-12, 04:28:00
Hello, I want to overclock my PC for better Graphics while playing games ..
Firstly I need to know is it safe to overclock a PC ?
what are the things involved in it ??
Kindly provide me a guide how to over clock my board
It is 'extremely' important to follow xmad's request for more information about your complete system.
Question #1, yes, it is 'reasonably' safe if guidelines & adherence to voltage and temperature limits are heeded.
Question #2, of primary importance is having hardware that 'is' OC'able to begin with. In addition to the hardware, it is normally just a matter of setting up the correct settings in the UEFI/BIOS. You will need some utilities such as CPU-Z, H/W Monitor, etc. Also, a digital multimeter is highly recommended.
Question #3, there are some 'basics', but every system is different and reacts different to tweaks and adjustments. When we know your components, it will make it easier to make suggestions and recommendations.

U400 has over clocked itself to max turbo boost at all times.

Hi all,
I have a U400 099329U with processor i5 2430M @ 2.4 GHz with turbo boost up to 3.0GHz.
Recently I noticed the unit getting quite hot with very slow charge times/high power drain on battery and noticed the Intel turbo boost monitor was always at the maximum of 3.0 GHz and would never drop. I lowered the max processor state to 99% in power management, now it stays at 2.4GHz with no turbo boost or energy saver modes. I have also returned the system to initial state and the problem still persists.
Any ideas as to why it started over clocking itself in the first place and how do I get things back to normal?
Any help would be appreciated!

Anyone?

Does iTunes Connect Christmas break mean apps won't update with new folios over Christmas?

I have 2 folios that are due to be released to my app this Christmas - both fall within the 22nd-29th window iTunes have chosen to close down.
So even though I can publish my folios through DPS over Christmas and pre-plan my app description in iTunes accordingly - before the 22nd - will those published folios not appear in my app?
Thanks.

You mean updating a paid folio... don't know if that needs approving, too.
Maybe someone else can chime in here (I have no exp in that)
(mobil gesendet)
Am 16.12.2011 10:05 schrieb "jamie.dunmore" <[email protected]>:
Re: Does iTunes Connect Christmas break mean apps won't update with
new folios over Christmas? created by jamie.dunmore<http://forums.adobe.com/people/jamie.dunmore>in
Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4088490#4088490>

Question re install newer Safari over old one AND related security quesiton

Hello. I have a friend who never updates anything on her older Mac and has a 1. number something Safari browser. (It has a Mac OS X, not sure what version.) I tried to update it from Apple's website, but a message appeared saying it might be a bogus website to which I was referred. 1) could machine be infected? 2) is there any special step to downloading a newer browser over an older one? 3) do you recommend any free program to search out infections first? (she will retrieve the OS X disk so I can give her a new user account password since she's forgotten hers).

Hi lichens:
Open disk utility (should be in your utilities folder), highlight your file, and click on repair permissions. Repair disk is a different process that "fixes" directory problems. That is found by booting from your software install DVD. DO NOT actually run the software install. Rather, select disk utility, highlight your HD, and then run the process.
Ask away - I am glad to try to help.
Barry

What new voice over option were made available for the new iPod Shuffle?

What new voice over option were made available for the new iPod Shuffle in the 10.1.2 update

But it said that there were voice over update integrated into it but i didn't catch what it was

I have just bought a new imac over the internet. it does not work. which store do I return it to?

I have just bought a new imac over the internet. it does not start up which store can I return it to?

jimoefrompymble wrote:
I have just bought a new imac over the internet. ...
If Purchased from Apple... Contact AppleCare... you have 90 days Free Telephone Support... 3 years if you Purchased the AppleCare Protection Plan.

When I launch my iCal it keeps "adding a new event" over and over

When I launch my iCal it keeps "adding a new event" over and over and over. It never lets me actually get into the iCal aplication? is there a way I can clear and reset mt iCal calender?

Greetings William,
1. Go to iCal > Quit iCal
2. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
--- NOTE: To get to "Home > Library" in Lion: Click anywhere on the desktop and then click on the "Go" menu at the top of the computer screen while holding down the "option" key on the keyboard. You will see "Library" in the menu.
--- NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
3. Launch iCal and test.
Hope that helps.

I had an iPhone 4 and recently upgraded to iphone5 now iCloud will not back up new phone. Under iCloud it shows 2 iPhones and my iPad. Is it trying to write new phone over the old one? What should I do? I a, afraid I might lose everything messing with

I had an iPhone 4 and recently upgraded to iphone5 now iCloud will not back up new phone. Under iCloud it shows 2 iPhones and my iPad. Is it trying to write new phone over the old one? What should I do? I am afraid I might lose everything messing with

I see. If you go to Settings>General>About>Name, that is the current name of your phone. The backup bearing that name should be the more recent one, and therefore the one you want to keep. I would delete the other one (presumably the one set up by Best Buy under your real name, assuming you changed it later), then see if that gives you enough space to back up again.
If it still reporting insufficient storage, use this guide: http://support.apple.com/kb/HT4847 to try to determine what's taking up all your room. In them meantime, you can perform a manual backup on your computer so your have a current one while you're troubleshooting this. To do so, connect your phone to iTunes, then right-click on the name of your phone on the left side and select Back Up.

Any posablity of over clocking on a k9agm2

Hey any way of over clock my amd 4800+ on the msi k9agm2 at all i know i picked a low end board cos i dont have the cash and it dosent have any voltage settings and what not in the bios so any ideas or work arounds would greatly be appreciated

Quote from: Teflon on 14-October-07, 23:36:39
thanks boss killer well the vcore i vould cvhnge nother wy but multiplyers and stuff i wouldent no how to go abotyuu isn memset ram timing?? sorry i was sure memset was ram tiing no proceesor stuff
yes its for mem. timings, not for CPU... try with clockgen

MOVED: [Athlon64] Over Clocking?

This topic has been moved to Overclockers & Modding Corner.
[Athlon64] Over Clocking?

This topic has been moved to Overclockers & Modding Corner.
[Athlon64] Over Clocking?

New to Over Clocking

Similar Messages

Maybe you are looking for