New to SAP - simple question for yall

Yall
I have been doing BI for over a decade and started to learn a bit about BW with a friend of mine that works with BW as a consultant.
Now the issues I care to find out are many, but to summarize:
1) Can a person without project experice gets certified in BW?
2) Would anyone hire that person without a project experience though?
I see a lot in common with my BI experience and BW but since I have never worked on the envinoment before I am wondering if this is even a sound strategy.
Bests
AR

Hi Andrew,
you can go for certification of BW, its really cool to have certified people in market. I am definetly sure it will give you value addition in your better job search and give you an impression that you certified.
Lots of European and UK and USA based companies now looking for only certified consultants...
go ahead............for certification.
- Aby

Similar Messages

Can anyone answer a very simple question for me ive heard the apple was giving a free iphone 4 or 4s bumper away is there any truth to that?

can anyone answer a very simple question for me ive heard the apple was giving away iphone 4 or 4s bumpers is there any truth to that?

Not any more, no. There was a free bumper program back when the iPhone 4 originally came out. It has long since expired.

New to SAP PY - Question on the Pr Cl. for Deductions

Hello All
I am new to SAP PY and new to this forum too. I look forward to your advice and guidance to try and make a career in SAP HR.
Scenario- My client wants to take out 401(k) and other pre tax deductions through IT 0014. I have copied some model wage types. How would I make sure that these wage types are pre tax. What Pr Cl should I use and what is the specification to be used.
Also there are a bunch of Post Tax Deductions which need to be taken out too. Please advise on the Pr Cl on those WTs too.
I would really appreciate any help from you all.
Thanks

I would implement the Benefits Module for this. However, there is still wage type and tax model configuration needed. Best way to start is copy SAP's model wage type using tcode OH11. You can also use SAP's tax models as an example and copy them. Both these modifications require some expertise in SAP and HR as it applies to the state involved, so you may want to work together with an HR business analyst very closely. Some states do not allow pre-tax 401k, like Pennsylvannia.

Pro Tools convert to Logic Newbie some simple question for logic users

Hey guys, I am a recent convert from Pro Tools! and There were just some simple questions I thought some of you may be able to help me out with. I am using Logic 9.1.1
1) After I set up a multi timbral software instrument (in this case MOTU Symphonic Library) how do I set up midi channels to trigger the individual sounds in the instrument. (in pro tools I used to create a midi track then send an output of that track to that particular soft synth)
2) How do I set up a and forgive my Pro Tools vocab but basically I want to set up a reverb channel on an aux track have it receive on a bus so I can send other tracks to that particular bus.
Thanks for the insight and really looking forward to finally make use of all this ram! lol

1) I have a nord stage and would like record via midi. In pro tools i would usually need to create a midi track with the output set the the nord and an audo aux track to hear it What would I do in order to record midi from my nord stage?
To record, just select a non-audio track, hit record and play the keyboard. The notes will get recorded into a region.
If you want to play it back to the Nord Stage as well, then it makes sense to set the Nord up as a MIDI device in your templates, so you can just add the Nord to a track and not worry about what MIDI ports it's on etc. Open the environment, create a New -> Instrument, called it "Nord Stage", set the MIDI port and MIDI channels it's on, and sav your template.
Now, when you start a song, to sequence the Nord, you just assign the Nord instrument to a track (by for instance, right clicking on a track and choosing your Nord instrument from the list of environment obects that appears).
2) The multi instrument trick is quick and easy its great but How would I do that manually?
Lots of ways, look into your key commands, ther are all kinds of "Create track with same instrument", "Create track with next MIDI channel" and so on. There are too many ways to do this to quickly talk about here. In short, all tracks have an environment object assigned to them, whether it's an audio object, or a MIDI instrument object, and this determines where the data on the track goes.
3) How do you set up midi so that it doen'ts overwrite notes when recording over them?
Not sure I understand you here...

SOME SIMPLE QUESTIONS FOR ALL OF YOU

hi,
I have some questions for all of you.
1. Oracle uses cgi (even asp!!! I've seen an asp page somewhere on an Oracle's site but this moment I don't remember where perhaps it is asp->cgi). Why ?
Oracle doesn't support their techologies
(Pl/SQL, Jsevlets,XML) ?
2. Oracle says that has just released a
new product for mobiles called "Portal2Go".
I tried to install this product on NT with OAS 4.8.1.
I had many problems during the installation and after many tries finally I did it(thanks God). but the problems continue...
many Jsp errors (from the "tested" supplied apps). My question is:
a. This product is in an early stage (many installation errors.. just a baby) and I think is stable for Sun Solaris but not on NT.
b. You Oracle "experts" (i.e. oracle staff, NOT YOU guys) tell me ONE advantage to use you product (I'm an oracle developer for 6 years now):
You say that I can PORT my existing app in any device and Web (through XML). This is a joke. Mobiles,PalmPCs,Web etc. have different requirements (content,display etc).The scope is different.. so this is absolutely FALSE (to use a boolean).
This release is user unfrienlty. Why.. tell me WHY to pay for a product and for extra hardware (read the product technical reqs!!) to do the SAME THINK
I do NOW with existing sources.
I've developed an app for my company's employees using existing version of DB (8.0.5),pure pl/sql and a WAP GATEWAY.NOTHING LESS NOTHING MORE.
please answer. Any comment welcomed...
maybe I'm wrong maybe I'm not.
PS.WHERE THE WAP GATEWAY/SERVER IS. I searced the cd and..nothing :-) ?
thanks
thanasis j.a.
B.A. in Informatics
M.Sc. in IS

Portal-to-Go is a wireless portal server, the first version was released November 1999.
The problems you describe that mobiles, Palm devices, etc all have different characteristics is one of the key reasons for Portal-to-Go. It allows any service to be displayed on any device by generating content in an appropriate format for specific devices. This way you can take into consideration the size of the screen, the display characteristics, etc.
It is 'stable' on Solaris and NT, though it is true that the installation procedure of the CD is for Solaris only. The product is not currently available on OTN, so the installer restrictions should have been explained to you when you obtained the CD.
Why Portal-to-Go? Here's three reasons:
1. Inherent problems of the User Interface for a wireless device, so we provide a way personalise the UI to improve navigation and allow commonly used parameters to be saved as stored preferences through the portal.
2. Differences in the characteristics between wireless devices make it hard to support all type without re-creating content and applications for each specific case. With Portal-to-Go, the same service can be accessed from any device.
3. Lack of content available for WAP and other wireless devices. We have tools to quickly create wireless services from existing Web sites as well as an application platform for creating new Java or database applications for wireless devices.
You are correct that the product does not have a WAP gateway.
I'm not sure where you are located, but feel free to contact me offline. I can answer any specific questions, or get you contact with a local Oracle representative.
At the moment, if anyone wants to obtain a copy of Portal-to-Go, you should contact your local Oracle representatives.
Paul

Simple Question for R/3

Hi, Alls
Question1, what roles and authroz. I need for CCMS alerts in R3 system and auto-reaction method seutp
Question2, Will I have to configure SMTP first for CCMS (Auto-re-action method)
Question3, Sould I need to change any profile for that ?
Please give me simple answer not any URL thanks
Thanks in Advanced

Read,
http://help.sap.com/saphelp_nw2004s/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
regards
Juan

New to Apple TV, question for the wise, old-timers

Love this device but was curious about user experiences, trial and error throughout the years, and just plain ol' tech knowledge...what is truly going to be a better than "good" steaming bandwidth for all my 1080p purchases? I'm about to order faster cable internet (currently have DSL ) so here're some questions:
A. Will a dedicated 10Mbps cable connection be sufficient to stream my 1080p movies instantly and steadily as if I was watching a Blu-ray disc? (I mostly have my movies and shows streaming from my computer HDD, not cloud)
B. Does it matter if other devices, i.e., computers, iPads, iPhones, printers, TVs, disc players all have Wi-Fi enabled but aren't necessarily being used to stream at the same time as Apple TV? Like, should I turn Wi-Fi off temporarily on all other devices when trying to watch a 1080p movie.
C. Any chance of installing VUDU or Pandora or anything else on the Apple TV?
D. Can I run Windows on it? (just kidding)
Thanks in advance for your suggestions and insights.

A. Yes 10mbps is sufficient. If they are stored locally then you wouldn't be using the internet.
B. No, but if you have a lot of Wi-Fi devices close together it may cause interference
C. No. Pandora can be airplayed from an IOS device though.

SAP upgrade - questions for report painter and query

Hi Experts,
I have two quwstions of SAP upgrade.
My requirement is: SAP upgrade from 4.6B to ECC 6.0 with non-unicode.
1.Does SAP upgrade influence the report painter? If influence, could you tell me what should I do for this case.
2. We have so many queries (SQ01) in our system and many of them haven't been run for a long time. we need a tool to get the runtimes of queries in a certain durition.
For example: From 2008/01/01 to 2008/03/31,I want to know how many queries had been run/ query name/ runtimes of each query.
Best regards,

> 1.Does SAP upgrade influence the report painter? If influence, could you tell me what should I do for this case.
You can check
Note 1155524 - ReportWriter: Upgrade Issues ECC6.0 -Common Customer Issues
> 2. We have so many queries (SQ01) in our system and many of them haven't been run for a long time. we need a tool to get the runtimes of queries in a certain durition.
Such a tool was RBE (Reverse Business Engineer) - which is out of support.
You can try to get that information from ST03. If that is not enough there's no other way than booking an SLO service to find out the queries that have not been used (http://service.sap.com/slo).
Markus

Simple question for some--not me :(

When would be better to use a switch statement and when it would be better to use an if statement.
Can anyone point me to a program or some sites with both working?

However, Switch statements can only be used with primitives and not objects.Do note that this has changed in recent Java versions. Here is the current statement from the Java Tutorial:
"Unlike if-then and if-then-else, the switch statement allows for any number of possible execution paths. A switch works with the byte, short, char, and int primitive data types. It also works with enumerated types (discussed in Classes and Inheritance) and a few special classes that "wrap" certain primitive types: Character, Byte, Short, and Integer (discussed in Simple Data Objects ). "

Simple question for you

Hi.
I've got a labview program, but i need change something, but i don't know how.
In attachement is a library and inside is my program in zzz.vi file.
The program is working, but when I run it. the program ask about a file with data.
And i need to change that, and it schould work like that:
When i run this program i sholud do nothing. But when i push the big "OK" button
the the program should ask about the file and do other procedures ??
I;ve tried a lot of ways , but it is still not working correct
Attachments:
ag33xxx2.llb ‏1077 KB

Place all your code (including the OK button) inside an event structure and set the event for "OK Button: value changed". That's it.
If you want to keep the VI running and load a new file whenever the OK button is pressed, place a while loop around it and add an event for the stop button.
See how far you get....
(Ideally, you should also add some logic, for example if the operator presses the cancel button at the file dialog, you probably would want to skip the rest of the operations. If this is a subVI, you might also want to set it to "clear indicators when called".)
LabVIEW Champion . Do more with less code and in less time .

Simple question for EVERYONE

Do your 5g iPod menus run smoothly or do you notice a sort of 'clunkyness'?
I noticed that my menus on my new 5g iPod are VERY clunky and not nearly as smooth as my previous 4g. They tend to stutter and delay here and there. Could this maybe be fixed with a firmware update? Does ANYONE else have this or a similar problem?

I see that clunckyness happens when there's high load on the ipod. When you start playing something wait for the hd to stop spinning and then cycle thru the menus. This makes it a lot smoother. I checked with the photo too and noticed that it does the same just not as bad as this. The monochrome ones dont though
Just my .02 cents

Probably a simple question for ya...

Ok, so I will start this by admitting I know almost nothing about AS3 and very VERY little about programming as a whole.
I'll post my code below and you'll probably think I'm an idiot for not knowing what's wrong with it, but that's ok, lol. I keep getting "1120: Access of undefined property..." with a whole bunch of different problems, all involving the movement of a character that I'm trying to create for a game I'm attempting to make. If you can please tell me what I'm doing wrong and if possibly explain it as if I know nothing about programming, it would be very much appriciated. I've been working on this for a while now and am not getting anywhere, and I just know the answer is something very simple I'm missing. Once again thank you very much in advance for an answer,
package
          import flash.display.MovieClip;
                    public class Shooter extends flash.display.MovieClip
                              public var WalkingSpeed;
                              public function onLoad()
                                        WalkingSpeed = 5;
                              public function onEnterFrame ()
                              if(Key.isDown(68))
                                                  _x = _x + WalkingSpeed;
                              if (Key.isDown(65))
                                                  _x = _x - WalkingSpeed;
                              if(Key.isDown(87))
                                                  _y = _y - WalkingSpeed;
                              if(Key.isDown(83))
                                                  _y = _y + WalkingSpeed;
Also a quick note is it worked great in AS2 with a few differences but I was told to use AS3 and when I changed it over and rewrote a few things it no longer works, thank you once again.

Whenever you get errors, you help others to help you by including the complete error messages in your posting. I cannot say for sure that the following line is a problem, but you can try changing it to see if an error goes away...
public class Shooter extends flash.display.MovieClip
change to
public class Shooter extends MovieClip
Then you will need to make some changes to update the code to be relevant to AS3. The Key class does not exist in AS3, so all of your Key.isDown() code won't work.
Also, _x and _y are x and y in AS3
You're best bet will probably be to search Google using terms like "AS3 Keyboard move tutorial" to get the info you need to do what you want in AS3

New To Sap need advice for the start

Hi all i am new to this technology and i want to have a carrier in SAP I have mcse and ccna holder have got experience in IT so where and what and how shall i start
As i want to know it so can someone Advice me Please as i will be looking forward to talk the course but if no advice is given i am loss Thanks Bonito

Hello,
Get a job as a junior and learn as much as you can. After a couple of years you will start to get good enough to get a job which isnt a junior role.
Good luck.
Kind regards
Ash Thomas
<a href=http://www.ashthomas.com>Sap Abap CV & Sap Abap Resume</a>
<a href=http://www.ashthomas.com>www.ashthomas.com</a>

Very simple question for a newb

I'm working with the 3d camera but somehow when I'm moving in my 3d space, the camera place moves. I'm not sure what im doing wrong to move the camera. Anyway, how can I move my camera and keyframes together from the "Top" view?
I've done it before, just dont know how.

You actually answered your own question. Switch to Top view and sure you have record animation turned off . If you can's see the camera and the objects in the view, make sure nothing is selected and press F to fit all scene items into the viewport. If you have the proper overlays turned on, when you select the camera you will see it, and it's motion path. You can now use the adjust tool to click and drag the camera. The keyframes will follow.

Simple questions for Oracle XML Team - please respond

1) Which class/methods should be used to obtain the content
model (mixed-content or element-content) associated with each
element declaration in a DTD? In other words, how do I know if a
particular element can have child elements and/or data in a
valid XML document, the frequency each child element can appear
under a particular element, and whether a sequence list or a
choice list was used to declare the element?
2) Do you have any bug reported so far for this part of Oracle's
parser made available in the last released?
Thanks,
Renilton
null

Renilton Oliveira (guest) wrote:
: 1) Which class/methods should be used to obtain the content
: model (mixed-content or element-content) associated with each
: element declaration in a DTD? In other words, how do I know if
a
: particular element can have child elements and/or data in a
: valid XML document, the frequency each child element can
appear
: under a particular element, and whether a sequence list or a
: choice list was used to declare the element?
Look at oracle.xml.parser.v2.ElementDecl class and then
getContentType and getContentElements methods.
: 2) Do you have any bug reported so far for this part of
Oracle's
: parser made available in the last released?
: Thanks,
: Renilton
Each release contains a list of bugs fixed. Is there a
particular bug you are interested in?
Oracle XML Team
http://technet.oracle.com
Oracle Technology Network
null

New to SAP - simple question for yall

Similar Messages

Maybe you are looking for