New to speed grade cc 2014...audio and playback question

1-When i use direct link, is it normal the audio tracks from my PP timeline not showing up in SG ?
2- I use SG with the AJA Kona3 and a Sony external broadcast monitor, playback under 1:1 setting is jerky every time the cursor goes from one clip to another...is this normal ?
3- There's a slight delay when going from one clip to another (control+ right/left arrow)...again, is this normal ?
My set up is:
- nMP (cylinder) with dual D700 graphics , 3.5 Ghz,6 cores, iStore Raid 5 (900 MBs read/write), Kona 3G with external OLED Sony broadcast monitor

Hi,
1. Yes, audio is not passing through Direct Link yet.
2 and 3. This shouldn't be happening. How do you connect your Kona 3G to the Mac? What kind of footage are you using?
Thanks,
Fran

Similar Messages

  • USB Mouse:usb 2-2: new low speed USB device using uhci_hcd and address

    usb 2-2: new low speed USB device using uhci_hcd and address 2
    usb 2-2: new low speed USB device using uhci_hcd and address 2
    usb 2-2: new low speed USB device using uhci_hcd and address 2
    usb 2-2: new low speed USB device using uhci_hcd and address 2
    usb 2-2: new low speed USB device using uhci_hcd and address 2
    usb 2-2: new low speed USB device using uhci_hcd and address 2
    usb 2-2: new low speed USB device using uhci_hcd and address 2
    usb 2-2: new low speed USB device using uhci_hcd and address 2
    usb 2-2: new low speed USB device using uhci_hcd and address 2
    again , again...
    My mouse not working.
    Please help me.Thank you.

    I have same problem. The command "lspci" return for audio card:
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
    When "modprobe oss_hdaudio" system freeze.

  • Audio and playback devices

    When i turn my 80gb ipod on a error message comes up and audio and video playback may not work properly then i cannot play any music this also relates to all sounds on my computer, can anyone help with this issue.

    Hi Joeharry13,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    i grasp that while playing ITunes your speakers quit. You have verified that the speakers are not muted and the Windows troubleshooter  does not identify the problem.  You would like the audio driver for you notebook. 
    Here is a link to HP ENVY TouchSmart Ultrabook 4-1195ca Drivers. You will need to select your correct Operating System  and click next to display a list of recommended drivers for you notebook.
    Have you run The HP Support Assistant to help with HP updates and resolving issues.
    Here is a link to a document on No Sound from Speakers (Windows 8), that may also assist.
    If you connect an external speaker does it work?
    Please let me  know the outcome and have a terrific day!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Premiere Pro on brand new MacBook retina 11,3 2014 crash and glitch

    Ok, I've read a lot of post about the CUDA compatibility on new MacBookPro, and i don't have installed and don't use the cuda driver but only the OpenCL,
    I have the MacBook Pro 11,3,  16GB Ram with NVIDIA GeForce GT 750M 2048 MB and 2,8 GHz Intel Core i7 Yosemite 10.10.2 installed on a 1TB APPLE SSD
    It is brand new and i have only my AdobeCC installed;
    Now I think it's not normal to see glitch on screen or jerky video during the video playback and crash of my premiere pro (2014.2 release, 8.2.0 (65) Build) or I miss something about the Yosemite compatibility?
    PS. working with normal 1080p files, DSLR or similar not over 50 Mbps 422
    Thanks!
    Vito.

    Yosemite sometimes has problems, often related to "default" permissions needing to be changed
    -one person's solution https://forums.adobe.com/thread/1689788

  • New To AE from Motion (FCP) - timeline and other questions (PREVIEW)

    Okay, so like your normal person, I just install and open a template and delve into it seeing what can happen.
    So far, I learned that you need an update for macbook pro (opengl), no problem, downloaded and all is fine.
    However, I did notice something that coming from a Motion POV, I am not used to....
    If I open a template, I notice that the time line plays back about 200 milliseconds or 5 seconds to play about 1 second of video. Is there a way to make it realtime? Also, it seems as if it needs to be rendered when you play back on the timeline (green bar). Is there a way to play in realtime? Surely the newer Macs are fast enough to play back in realtime.
    Last, for now, what is the best training for this application? Lynda.com, books, other video resources?
    Thanks.

    >I think that makes sense since it is going to RAM.
    Yes, it does. To not "loose" the frames, enable the disk cache. This will dump frames that cannot be held in RAM, so they are available for spacebar playback and faster generation of successive RAM previews
    >Nonetheless, regardless of the settings, I could not get it to play in >realtime at all.
    Check the info panel and see if indeed it is as you say. If the issue persists, search this forum. There is tons of things that can screw RT abilities from incorrect graphics card configs to audio or certain QT CoDecs.
    >Surely this can't be the case is it?
    It can. Once more: you are letting your confusion get in the way of seeing things for what they are. AE is a program that still does most of its stuff in software running on the CPU, not your graphics card like it does in Motion. It functions on different principles. Effects have to explicitly be written to use hardware acceleration, which only a limited number of them do and then again, they will revert to software-only mode if you stack a number of effects that exhaust your graphics card resources or combine them with non-accelerated effects.
    This is no different than what happens in Motion when you use a given number of layers with blendmodes, distortion effects etc.. that can no longer be processed in realtime. At that point it actually behaves much worse than AE since it lacks the fallback software routines. It seems, that you just never work with anything remotely complex and thus never have reached that point, which would explain your disappointment and frustrations with AE. If you are not willing to understand the conceptual differences, it will forever be that way.
    I can only once more urge you to not see as a replacement for Motion as a background and title generator, but as a flexible, resolution independent compositing and effects package that does so much more, but at the cost of buying this flexibility with more generalised, software-only routines. You may see this differently and never use AE as deeply as some other people, but this is just how it is.
    Mylenium

  • Adobe after fx cc 2014 sound and playback issue

    When I rendered my first scene in adobe after fx cc 2014 I noticed I had no sound, and the video was playing frame by frame not full speed.
    What did I do wrong?
    Big D.

    You probably used the default Lossless preset in the Output Module. You should probably type rendering in the search help field at the top right corner of AE and study up on the options.

  • Audio and video  question.

    I have a standard audio button on page one of my folio but when i swipe down to a page that has a video it kills the audio.
    It only kills the audio exactly when the video starts.
    Thoughts?

    Pretty much how it works. One or the other and one at a time.
    Bob

  • Dual G5 want new HD: SATA? SATA-II? and other questions

    I have a Dual G5 2Ghz and it only has 2 slots internally for the disk drives. I currently have a Raptor as the boot drive (OSX 10.4.11), as well as the original 160GB drive (OSX 10.5.?) that came with the Mac.
    I want to replace the 160GB drive with a 500GB or similar drive. Do I want to look for SATA or SATA-II ? Will SATA-II drives work on SATA?
    There is no point in getting (and paying for) a drive that is faster than the Mac SATA can handle, I assume!
    Can someone explain to me what I should look for, or even more specifically, which specific drives I should consider?
    Thanks
    W

    Hi-
    There is not a drive size support limit with the G5.
    All drive sizes may be considered.
    1TB and 1.5TB drives are reported as successfully used in the G5.
    No real, solid information on the 2TB drives, though there is no physical or software reason why it wouldn't work.
    With a 2TB drive, it may be necessary to partition in two, but this is only necessary in earlier OS versions.
    OS X 10.5x should not have a problem.
    2TB drives are relatively new, and there are scattered reports of troubles from users of even the latest machines, PC or Mac.
    Western Digital drives are reported favorably, and I really like mine.
    Avoid the "green" drives for internal use, regardless of maker.
    Stick with 7200 RPM SATA drives like the WD Black or Blue series.

  • Audio and Image question for FCE

    Hello!
    I have this little problem. The music Im importing to my project (mp3) is only playing the baseline of the song, not the actual music...how can I change that? Also, unfortunately the white balance is horrible of the footage...I need to enhance the imgae so it looks a bit brighter, since we shot in the most terrible circumastances...could you let me know how to go about it! I have very little time to finish this.
    Take crae and thanks in advance
    Magdalena

    If the gamma correction suggested by Alchroma makes the black too gray, try using the "Mids" slider below the center color wheel of the 3-way Color Correcter (must be in "visual mode" of 3-way CC filter). The blacks won't be affected and the picture will "come alive".
    After doing so, you may want to also experiment with the Saturation slider as well.
    Also, unfortunately the white balance is horrible of
    the footage...I need to enhance the image so it looks
    a bit brighter, since we shot in the most terrible
    circumstances..
    I've never heard of an mp3 only playing a single instrument from a mix. Are you sure you aren't trying to import a .mid file?
    If it is a .mid file, then open it in Quicktime Pro and export it as an AIF file -as Alchroma has also suggested - with the matching bit and sample rate (typically 16-bit/48kHz).
    Hope this helps!
    AK

  • Inserting Flash video and playback question

    Hello,
    I am using Dreamweaver CS4 and I have inserted a Flash movie into a web page.  It's working fine, except that I would like it to automatically go to a different web page when the video is done playing.  Is there a setting for this within Dreamweaver itself or do I have to write an HTML script of some kind to make it do that?
    Help and advice are appreciated. :)
    Thanks, ryan

    I don't have any experience at all with Actionscript.  Do I have to buy Flash?   Or can I access/edit it as part of Dreamweaver?

  • Speed Grade CC missing features when Direct Link with Premiere CC

    I'm new to speed grade, so I am unclear as to what the issue might be:
    When I direct Link from Premiere Speed Grade does not behave the way I would expect
    I cannot select any tab other than "Look"
    I cannot toggle the 'visibility' of layers
    I can create adjustment layers, but they have no effect on the sequence.
    I wish to grade my whole sequence with a broad LUT (day for nite)
    Why does speed grade act this way?

    Sam,
    In the Direct Link process, Speedgrade uses the PrPro project file, rather than creating it's own internal files. Adobe is very cautious about allowing Sg to mess with that project file, with any/all sequences/timelines that might be there. So therefore ... ALL features that directly change a sequence timeline itself are locked-out, or as viewed ... greyed-out. They don't really explain this too well anywhere I've seen yet. So there are some caveats with working Direct Link, and once you get them down it is a sweet process ... mostly. You're right, you can't do anything but adjust how things "look" in a D-L session. That doesn't mean you can't change things of course ...
    Grading layers: Create "adjustment layers" over clips or whole sequences in PrPro before going D L to Sg, and use those ... works just fine, as Joost notes. Any of Sg's adjustments from color primaries/secondaries/LOOKs/LUTs work fine applied in an "adjustment layer" the same as if they were in an Sg-created 'grading layer'.
    There is one BIG CAVEAT: as Sg is not allowed to touch that timeline UNTIL you click on the "save & go back to PrPro" icon, IT DOES NOT DO ANY AUTOSAVES NO MATTER HOW YOU'VE SET PRPRO & SG FOR AUTOSAVING! If you have PrPro running in the background, you may see a brief flash of "autosaving" or something to that effect every now & then. IT IS NOT SAVING YOUR SPEEDGRADE WORK in a Direct Link session, do NOT be deceived!
    You will need to do manual saves or save-as's every so often or risk losing your work. Yea, I wuz the guy what found this out ... sigh. Only lost two hours of work, and we had a joyful thread about this when I posted on that some months back. There's been talk of doing something about this, don't know if there's a correction for this coming.
    Other than that, grading in Sg in a D L session works as you'd expect.

  • K9A2 Platinum Audio and Video Driver problems.

    I put together my new rig last night and am having a lot of problems with drivers.  The rig installed windows XP SP2 in about 10 minutes though   
    Rig:
    MSI K9A2 Platinum Bios 1.3
    Phenom 9850 BE
    G.SKILL 1066 5-5-5-15 2T
    MSI HD 3870 OC
    WD Raptor
    CoolerMaster 550watt
    Several fans to keep cool air flowing.
    My problem is that I can not find good audio or video drivers.  I started by trying the audio drivers included with the board, but they would not complete the install.  I ended up downloading audio drivers from the MSI site, however they also would not install with the "#-0001" error message.  I followed the instructions on the forum: https://forum-en.msi.com/index.php?topic=115396.msg866810#msg866810 including installing the MS HD Audio Driver Hotfix but still cannot get sound working.
    To further complicate my problem the 3870 has HD onboard, which makes a second instance of Microsoft UAA HD Audio driver in the device manager, and also tries to find drivers for bits of it's audio hardware.
    Currently I have disabled on-board audio completely through the bios, and now everytime I boot-up I get new hardware found for UAA HD Audio, and also some Media interface.  Clearly this is the HD on the 3870, however I can't seem to get drivers installed that will agree with the hardware thus the message continue to pop-up!
    Does anyone have suggestions or similar experiences?

    Quote from: AMDloyal on 24-April-08, 09:56:10
    Thanks for the links. 
    The standard AMD ATI Drivers + South Bridge chipset drivers worked flawlessly.  I've made a clean run through 3dmark06 so i feel good about them.
    As for the audio.
    I've worked through both of those suggestions but haven't gotten anywhere.  A few times I have been able to get the drivers to install without the "error code -0001" message, but that doesn't give me sound.  Under device manager I still end up with yellow exclamations.  It seems no matter what I disable or try to do nothing works.  I've tried updating drivers manually like was explained in the first link, but when the update is complete I get the messages lile: "There was a problem installing this device  MEDIA  An error occured...  The data is invalid"
    Does anyone know if this indicates a hardware of driver problem?
    "Thanks for the links. 
    The standard AMD ATI Drivers + South Bridge chipset drivers worked flawlessly.  I've made a clean run through 3dmark06 so i feel good about them."
    you are done well.
    As for the audio.
    I've worked through both of those suggestions but haven't gotten anywhere.  A few times I have been able to get the drivers to install without the "error code -0001" message, but that doesn't give me sound.  Under device manager I still end up with yellow exclamations.  It seems no matter what I disable or try to do nothing works.  I've tried updating drivers manually like was explained in the first link, but when the update is complete I get the messages lile: "There was a problem installing this device  MEDIA  An error occured...  The data is invalid"
    Provide screenshot from Device manager.

  • Premiere Pro CC 2014 QuickTime Audio and Video Syncing problem

    Hi everyone,
    I am having and issue when I import QuickTime video into Premiere Pro CC 2014. I've just started doing some editing so I am very new to all of this. I recorded video in Photo Booth on my mac. I exported the file to a .mov file and imported it in to Premiere. When I play the file in premiere everything is fine up until halfway through the video. The video starts to play faster than the audio and everything is off. When I play the video in QuickTime everything is fine. I don't know if I did something wrong when I imported the file but I am hoping for some help. Thank you.

    I would be willing to bet the video is recorded as VFR, variable frame rate ... in other words, it creates more frames per second when it needs to for keeping up with screen changes, and less when it doesn't see much changing on your screen. This saves bandwidth of course, BUT ... PrPro is not setup to work well with VFR footage, it really needs CFR, constant FR. So ... highly recommended if your capture program doesn't allow setting CFR is the free program "Handbrake", which you can google for. Use that to convert the footage to CFR, then import that into PrPro.
    Neil

  • I am new to iMovies.  When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch.  Very annoying.  How can I fix this?

    I am new to iMovies.  When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch.  Very annoying.  How can I fix this?

    DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

  • I have a new mac book pro (sept 2014) and am suddenly stuck on the log-in screen. Keyboard input not working to enter my password. Already tried a basic restart and a cmmnd/ cntrl/ pwr troubleshoot to no effect.

    I have a new mac book pro (sept 2014) and am suddenly stuck on the log-in screen. Keyboard input is not working to enter my password. Seems to be a log in issue as keyboard works for forced troubleshooting. (And b/c when I first noticed the problem, I was able to enter my log in password but then everything sort of froze. Now, no ability to enter the password.) Already tried a basic restart and a cmmnd/ cntrl/ pwr troubleshoot to no effect.

    Reset PRAM:   http://support.apple.com/kb/PH14222
    Start up in Safe Mode.
    http://support.apple.com/kb/ph14204
    A new Mac is in warranty for 1 year from the date of purchase.
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare or take it to the Apple store to have it checked out.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

Maybe you are looking for