New to the game and need some quick help

I have been thrown our exisiting phone infrastructure and what do you know we are having some issues.
We have a new series of DID's and when they are dialed from our directory they go anywhere? Not routing to the proper extension. Translation pattern looks good in comparison to the extensions that are working.
Cisco Unified CM Administration System version: 6.1.3.3000-1
Cisco Application Administration - 5.0(2)_Build064
Package: Unified CCX Enhanced
Regards,
Dan

First thing to know is that everything that has a DN can be used for routing, so it's a good idea to look at the route plan report to find matches.
If you can't find an exact match, chances are you're hitting something with wildcards ie X, [1-2], etc
An easy way to check routing if you're new to the game is to use DNA
Cisco Unified Communications Manager Dialed Number Analyzer Guide, Release 6.1(1)
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/dna/6_1_1/bw-dna.html
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

New to the Mac and need a little help!

I recently upgraded our pc in the house to windows vista. Before the upgrade I could use remote desktop to access the files on a shared drive. Now I cannot. Any help would be appreciated.
I am using a mini Mac with 10.4.9 on a 1.873 core duo mini.
Using remote desktop on XP allowed me to access and move files from a shared D:\ drive that Vista will not allow me to see. HELP??? the drive used to be accessible through the finder.

Welcome to the Apple Discussions!
I'm a little confused, are you running the Microsoft Remote Desktop Connection software on your Mac mini under Mac OS X? So, after the upgrade to the PC, the Mac mini can no longer connect with the same software? So your question is actually about how to re-configured Windows Vista settings so the drive is available again to the Mac client?
-Doug

Need some quick help - fairly urgent!

I've just taken over a new job and have been the task of finishing the new brochure for Christmas, there's not a lot to do but a lot of the measurements need changing
This is the layout I'm dealing with..
All the boxes have been made in Illustrator
The text has been done in In'Design and it seems every piece of text is it's own box if that makes sense
My question is, if I select the whole specification box - copy, paste it into Adobe Illustrator and change the text there, then paste the edited box back into In-Design, will I lose quality when it gets printed?
I'm worried if I do it this way it may come out blurred? Or am I just worrying about nothing?

I couldn't find an Illy file in the end and have ended up creating tables in ID to replicate what was already there!
Didn't take very long and I guess if I didn't do it now, I'd come across the same situation next time!
Date: Wed, 30 Nov 2011 08:48:07 -0700
From: [email protected]
To: [email protected]
Subject: Need some quick help - fairly urgent!
    Re: Need some quick help - fairly urgent!
    created by Peter Spier in InDesign - View the full discussion
There certainly are viable "quick fix" solutions proposed here, and if the dealine is looming and this file never needs to be touched again I might be tempted, but they are only postponing the pain for a file that needs periodic updates, and I wouldn't waste effort on them, myself, when that time can be put toward a proper rebuild now if that's the ultimate goal.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4054725#4054725
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4054725#4054725. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Replaced zd8000 motherboard and need some troubleshooting help please............

Hello All,
I just replaced the motherboard on our HP zd8000 (pentium 4, 3.0ghz, 2gb ram, Win XP) with a used but tested good MB and need some help with the following.
1) I now cannot play DVD movies as the error no "dvd decoder" present which was not an issue before? Where can I go to get a free decoder that will work, as Windows only shows paid versions? We have the dvd burner/reader with lightscribe. SOLVED! CNET HAD DECODER.
2) The internal temperature, according to SpeedFan, is running around 140 degrees with just some Internet browsing. Is that a normal temperature because I only have one of three fans running on the laptop? Is there anyway of making all three fans run to be sure there are no issues? I am positive I hooked up everything but again only one fan seems to be running?
3) I discovered some of the pins were damaged in the card reader. I may get the Seller to give me a discount, no intention of tearing it apart simply for that, but is there any concern of short or otherwise?
4) Our battery stopped charging years ago, these were notorious for such, but I purchased a new one last year and hoped the replacement MB would allow charging again. No such luck though. Is there anything I can do, BIOS update etc, to make the battery charge?
5) Anything you folks can think of for me to test to insure the new motherboard is working properly?
Thanks, Ralph
P.S. This was a correct replacement board according to MB serial numbers. Everything else seems to be functioning properly other than mentioned. Our graphics went out on the original MB.
This question was solved.
View Solution.

Some of the wires had pushed out of the harness that connected the other two fans. I double checked and re-attached those so now the laptop is running quite a bit cooler.
EVERYTHING IS GOOD TO GO!

Am going to get a new iPhone, my first and need some advice...

Hello-
I have been looking at getting an iPhone 4. I currently am with Verizon but both contracts (cell and data) are up so I was thinking about their iPhone 4. I have no idea if there is a difference between the way ATT deals with the calls, texts, internet and a carrier like Verizon. I am assuming the phone is the same and the OS will be the latest and the same. I did read that Verizon uses the CDMA network not the network 4GLTE. I guess when the 4G network is more of a network they might offer the option to choose.
Does anybody know if tethering is available with any of the carriers yet or is that what either 3G or 4G should help with? If so, since 3G has been a network for sometime, and a darn good one at Verizon, what is the deal with tethering. I remember going with my friend when the iPhone first came out and ATT told them that a "concept" called tethering will be out in about a few months. I do not think after 5 years it has been out.
I am open to all kinds of advice, cautions, suggestions, etc. as I embark on this new endeavor. being a tech nerd (in a negative way) I am nervous about how to deal with all of the functions without ruining the p[hone, which is what I usually do to the computers. I would like a super heavy duty case with a covering for the display (that allows the touch function to work). If there are choices with the iPhone 4, I would like to hear people's opinion of certain ones. Even apps. is it OK to get them on the apple website or iTunes or both? Are there apps that have been checked by Apple and are like Apple certified?
I would like (but not sure if it is possible) to be able to travel and use the internet out in the desert, for example. I have a Verizon MiFi2200 and I use that for my MacBook and it works great. Do they have something like that for the iPhone.
OK, that should be enough for now. OH, one more thing. Does it matter if I get applecare right of or wait until the initial warranty is about to expire before I purchase Applecare. I realize the phone sup[port will not be available to me if I wait but the genius bar and sending the camera in will be.
Thanks a lot!

Read here: http://support.apple.com/kb/HT2109.

Need some quick help with redoing a website

Hi, I did my website done in iWeb in 2008, published it, and have it hosted by GoDaddy. I want to take it offline for now and design a new 'under construction' site, but there is a chance that I might want to still go back to the original version.
I see the current 'Domain' in Home Folder>Library>Application Support>iWeb.
Can I just redo my site (still working in pre-2008 iWeb), publish it, and if I need to, use the old 'Domain' to revert to my current website?
If yes, how do I do that....and, if 'no', what should I do?
Thanks!

Hi and thanks. To reply....
I published the website in iWeb and it is on my MobleMe. It was done in iWeb v 1.1.2, and I have not upgraded iLife on the computer that I designed the website on, as I feared losing some/all of it in an upgrade.
I do, however, pay GoDaddy for my corporate URL AND hosting....which I suspect is the forwarding and not 'hosting' per se....but on my Hosting account on GoDaddy it does say 'Shared Hosting'.
I do not want to 'overwrite' my current site just yet, as I am uncertain about the next one's content or the time to do it the way I envision it. What I want to do is SAVE my current site in case I want it back and, in the meantime, put up a page that says Under Construction. Can you help with that?
Much appreciated

New to the forums introdution / need a little help

hi i've just recently build a new PC for Gaming
CPU - Dual core E2200
RAM - 4GB
VGA - 8500GTMSI 512MB
i wonder if games like need for speed undercover and GTA IV will work fine ?

Yep probably, but at standard in game graphic resolution and details.

New To The Forum And Looking For Speed Help!

Hello, After trying to find information about my problem on the Internet and then speaking to the BT Indian Call Centre, I stumbled upon this forum. I am hoping, having looked at so many helpful comments and contributions, that I might be able to shed some light upon my connection speed issue. I have had a very pleasing and stable Internect connection speed of nearly 8Mb. However, I recently moved my router to the Master socket in the house which was better positioned to give a good WiFi signal throughout my house. However, when I have plugged in the router and booted it up, I can only connect at just over 4Mb regardless of what I try. I know I am at risk of sounding a touch ungrateful here because there are many more people with bigger problems than I but I would be very grateful for some advice / assisitance as to why my problem might have occurred and how I might regain my previous speed. Thank you in advance for any help! Cheers.
Solved!
Go to Solution.

welcome to the forum
in order for the forum members to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) http://speedtester.bt.com or http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 and post the results .
are you connected directly to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Need some quick help with server proxy on PI 7.1 system

Hi,
I am implementing a server proxy on the PI 7.1 system to do some logging to a table. So, when I go the the proxy in sproxy and generate it, in the interface section on the properties tabs I only see a drop down that says point to point enabled. There is no implementing class to click into and thus not method to populate with the custom code. Some direction would be appreciated, I have been working 7.0 for a while, so the missing implementing class is new to me! I know the method name has changed from the execute_asycronous etc... Am I going to the wrong place now to find the implementing method?
Thanks,
Chris

Whoops! Brain cramp. accidentally set the interface to outbound and not inbound in the ESR lol. Sorry.

Need Some Quick Help w/Digital Frame for Xmas Gift Please...

Have a Kodak digital picture frame. I don't understand the architecture of using the SD or USB cards w/the frame. I bought a 1 and 2-gb SD card. When copying my photos to the cards (112 of them), I get about 92 on the 1-gb card and it says full, but still shows most of the disk available, but also says is full so only about 92 photos goes on there. So I try the 2-gb SD card, and exactly the same amount of photos fit??? Why - it is twice as big??? I tried reformatting it to Macintosh but that only made the frame not recognize it, and when I formatted it back to MS-DOS, the frame still does not recognize it...Question one...Why the 1 and 2 gb SD cards hold only the same amount of pictures and how can I get it formatted back to be read by the camera...and can I fill 112 pictures on??? So then I thought maybe a USB stick would work. Bought a 2-gb Lenar Firefly stick and whoa and behold the exact same thing happens...I get about 92 pictures. So I figured which 92 pictures I wanted and selected all the card contents, moved to trash and deleted the pictures, then went back and picked only the 92 pictures I wanted and copied to stick and all show that they are there, but when I go to play them on the frame the old pictures I had on there before are there and not just the 92 new ones. How do I get rid of everything on the disk and get the pictures onto it that I want...I am afraid to erase or format it in any way because the frame probably won't recognize it again. Also, there is one picture that says "Bad file" and I have no idea which picture this is...and can't get rid of it because when I move them all to trash and put the new pictures on the stick that one is still there????? On the stick, I have like 130 MB (112 Pictures). When copied it says 92 pictures with 1.76 GB available...why is this and why can't I copy pictures to that space??? Can someone explain this to me and advise me what I can do, how do I reformat it so recognized also??? Also, I have songs copied to the frame's internal memory, but can't figure out how to play the pictures and also music at the same time????? Thanks so much for any quick help and thorough explanation so I can get this wrapped and sent. Merry Christmas! Gary

I also have a Kodak picture frame and had the same problem with my SD card. Two things I learned.
1-Even though you can't see them on the card - there are hidden files. You can see them - use this procedure.
http://www.tech-recipes.com/rx/3104/os-x-show-hidden-files-and-folders-in-mac-os -x-finder/
2-The other item I learned is that you must drag and drop the files and then empty your trash. While the reader is connected to the machine.
Doing these two items will clear your card to full capacity.
As far as the "bad file" I am still working on that one. I have little movie clips on my card and believe that may be causing this view..so your music may be causing this message. Start with just the pictures only and see if you can load them onto the frame.

Need some quick help with jbutton

Hi,
My first post so please be gentle!
I currently have two buttons in my container. The first one when pressed calls another function that generates a set of coordinates (button = generate). I now have another button that wants to take those coordinates and draw them on-screen, but I'm having trouble doing this since I can't get the "generate" button function to pass the xycoords over to the "draw" button function. I'm more of a Fortran/Perl programmer and I'm a bit confused how to go about this. I tried making the variable (xycoords) a gloabl variable, but id rather not do this.
Any tips?
Cheers,
Adriano

Sure, show us the code. Otherwise we have to try to read you mind.
Here is the scenario you are in:
Event Driven Method (ActionPerformed/ButtonClicked/etc): you do not have arguments that you can control, so if you want to use something from within that method you have to have visibility to it (global definition with respect to the routine) and in the Java world that usually boils down to class variables or some type of public data class.
Now, it you want the coordinates of the click event, that is contained in the MouseEvent... getX and getY, so you can use these as arguments to other methods from within your MouseListener.

Need some quick help

I have not used my Final Cut Pro 5 for about a year and have forgotten how to use it. I have two clips in the timeline and I want them to display side by side in the two windows above the timeline so they show the same frame location in the timeline. Synchronized so when I play through the timeline they both progress along with the play simultaneously. I know I did it before but am now getting frustrated trying to remember how to do it and the books are just confusing me. Thanks.
John

Put the two clips in the timeline, one on top of the other. Switch the Canvas to Image+Wireframe in the View popup. Drag the corner of the image on the top layer to scale it down. Move it to position as desired. Repeat for the clip on the layer below.

I'm new to java and I need some quick help with NetBeans.

Hi. To whomever can help here's the problem. I've been trying to install netbeans ide 5.0 on my computer for a while now and i can't seem to find out what is wrong. I'm in a java programming course and i need the J2SE Developement Kit 5.0 Update 7 and NetBeans IDE 5.0 Installer on my comp. Whenever i go to install it, it can't automatically create a directory and has erroe null in place of it. Whenever i made a new directory for it a page would come up telling me all of the errors during the installation which are null. Since i have administrator privelages and plenty of free space on my hardrive.

Hi,
I want to suggest you that
1.please check if any prerequisite is require before installing the NetBeans IDE,i hope there is nothing like that except proper jdk on your machine.
2.if you already having JDK on your machine check for the compatibility of that jdk version with the required NetBeans IDE version.
3.follow the steps provided to install the NetBeans IDE 5.0 for that refer the below link
http://www.netbeans.org/community/releases/50/install.html
hope you will get rid of the problem .....
---Vidya

I can't access the internet with Firefox on my computer (Windows 7 PC). I have used Firefox as my browser for 1 year but 5 days ago it stopped working even though Internet Explorer worked fine. I can't solve the problem and need some help.Randy Brown

September 26, 2011
Dear Mozilla,
I am having some difficulty accessing the internet with Firefox on one of my PC computers. I normally use Mozilla Firefox as my web browser and google is my homepage and gmail is my email system. The operating system is Windows 7. For over a year this system worked perfectly but a few days ago it stopped working. When I launch Firefox now I get the message that that website (www.google.com) is unavailable. In fact, I can’t access any website and I am blocked from the internet entirely within Firefox. My internet connection is fine because Internet Explorer works fine. I can access google and any other website within that web browser. I have investigated all the security issue I can manage and found no smoking gun. I’ve tried uninstalling and reinstalling Firefox to no avail. Is Windows 7 compromising the effectiveness of Firefox? Any suggestions or other assistance you can offer would be appreciated.
Sincerely,
Randy Brown
[email protected]

You only have to clone your mac when using certain cable modem. You don't clone your mac when using dsl.
Greetings from Northern Ontario, Canada

New to the berry world, need some direction

I have just purchased a BB Tour 9630, I'm trying to customize my emails with a signature as one can do in Outlook and many of the online email sites. I found one reference to doing it which said to click on a particular option on the BBDM (5.0) but that option does not appear on my screen.
Can anyone tell me how to do this or if there is some software I can get that will allow me to do it. Also would like to know if DM v5.0 does not include some options that were on the previous versions.
Thanks,
Bob
Bob
Solved!
Go to Solution.

Hi and Welcome to the Forums!
Depending on your email service, you have a few options:
If BES, go to (on the BB):
Homescreen > Messages > BBKey > Options > Email Settings > select your BES Message Service (usually "Desktop")
Then set "Use Auto Signature" to Yes...and fill in the space with what you desire.
If BIS, you have two methods:
1) On the BB, go to the device interface to BIS:
Homescreen > Setup > Email Settings
Click on the appropriate account and the screen display will have a "Signature" section.
2) From a PC/Browser, go to your carriers BIS website:
http://www.blackberryfaq.com/index.php/Where_can_I_log_into_my_BIS_account%3F
and log into your BIS account. Similar to the device interface, edit the desired account and modify the Signature section.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

New to the game and need some quick help

Similar Messages

Maybe you are looking for